Used Gate Valve for sale (6,637)

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 1,880 mm, construction height: 1,560 mm, operating hours: 3,102 h, fuel type: electric, mast type: duplex, Manufacturer & model: TOYOTA OSE 100 Mast: 2W1880 ID: 25110.8747 Category: Used Mast type: 2W Lowered height: 1560 mm Lifting height: 1880 mm Capacity: 1000 kg Platform height: 1200 mm Picking height: 2800 mm Initial lift: Yes Cabin width: 800 mm Year: 2020 Operating hours: 3102 hours Knsdpfezuugxsx Afksa Battery capacity: 24V / 620Ah Options: with SAFETY gates !!

Condition: like new (used), Year of construction: 2020, load capacity: 800 kg, lifting height: 1,880 mm, construction height: 1,380 mm, operating hours: 661 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V Mast: 2W1880 ID: 24091.5051 Category: Demo Mast: 2W Knodpfxozuudds Afkoa Lowered height: 1380 mm Lifting height: 1880 mm Capacity: 800 kg Platform height: 1200 mm Order picking height: 2800 mm Init.: Yes Year: 2020 Operating hours: 661 h Battery capacity: 24 V / 500 Ah Options: SAFETY gates! Complete, LIKE NEW!

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,808 h, load capacity: 4,000 kg, lifting height: 4,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 3,150 mm, battery capacity: 870 Ah, remaining battery capacity: 78 %, battery voltage: 80 V, DGUV certified until: 08/2027, fork length: 2,400 mm, total height: 3,150 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,808 STILL 4.0-tonne electric forklift with full cabin and heating, battery at 78%, good tires (rear tires new), telescopic mast for optimal visibility, side shifter, 4th hydraulic valve, pre-installation for compliance with German Road Traffic Licensing Regulations (StVZO), fork length 2,400 mm, charger included. Additional attachments such as fork positioners, rotators, etc., as well as other fork lengths are available upon request. Kjdpfx Aozivgcofkena Price ex works, including 1,000 hours of service according to STILL manufacturer specifications and a valid FEM (UVV) inspection at the time of sale. Inspection, demonstration, and test drive are available by prior telephone appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-bed trailer (transport costs upon request). You can find more information about us and other offers on our newly designed website!

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 2,618 h, load capacity: 2,000 kg, lifting height: 4,000 mm, free lift: 1,900 mm, load center: 500 mm, fuel type: electric, mast type: duplex, battery capacity: 465 Ah, battery voltage: 80 V, DGUV certified until: 08/2027, fork length: 1,200 mm, total height: 2,550 mm, Equipment: CE marking, UVV, full service history, lighting, sideshift, Linde E 20 electric forklift with the following specifications: * Operating hours: 2,618 * Lifting capacity: 2,000 kg * Lifting height: 4,000 mm * Overall height: 2,550 mm * Year of manufacture: 1998 LINDE 2.0-ton electric forklift with a semi-cabin, very good tires (rear tires new), duplex mast with full free lift, side shifter, 4th valve, multi-lever, two-pedal control, lighting, fork length 1,200 mm, charger. Kodpfozrr H Djx Afkona Includes service according to LINDE manufacturer's specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Please call to schedule. Sale is exclusively to commercial businesses. Subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-loader (transport costs upon request). You can find more information and offers on our website!

Condition: excellent (used), Kongskilde cyclone separator with rotary valve Kedszrlznopfx Afkona For sale is a Kongskilde cyclone separator, including an installed rotary valve with gear motor and connecting hose. This unit is suitable for separating and discharging chips, granules, dust, or similar materials in dust extraction and conveying systems. The cyclone is mounted on a sturdy frame and stands on a transport pallet. Scope of supply as shown in the photos: Kongskilde cyclone separator Rotary valve with drive Frame Connecting pipe and flexible hose Inspection at our warehouse is possible by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Kodpfxsztm H Ij Afksna Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Knjdpfjztmxqsx Afkja Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: excellent (used), Safety valve for refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball valve, temperature switch, thermostat, expansion valve, safety valve -Manufacturer: Hansa, safety valve, unused, original packaging Knodofyfxbspfx Afkja -Type: KSV 28 bar 2442280050 -Connection: G1/2" -Number: 5 safety valves available -Price: per piece -Package dimensions: 150/80/H55 mm -Weight: 0.6 kg/piece

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors. Knsdpfx Ajzur T Aefkja

Condition: used, Inlet diameter: 260 mm with sprocket and drive shaft Knsdpfx Aezr Hg Sefkja

Condition: used, Inlet cross-section approximately 450 mm with SEW gearmotor, 3 kW. Kjdpfxjzr Hgle Afkona

Condition: used, Norgren I374997 Kodpfjzrxtqsx Afksna Technical data: - Condition: As new

Condition: used, 2 items Knjdpszrxnzsfx Afksa as good as new

Condition: used, New Technical data: Kedpozrxmdjfx Afkjna - Type: 2431.52.00.36.05

Condition: used, New Knedpfx Afszrxl Tskoa Technical data: - Type: 2431.52.00.35.05

Condition: used, Pneumatic valves suitable for WEINIG type UNIVAR 10 or similar Knjdpozrxlaofx Afkea Standard operation on both sides or spring-return Technical data: - Number: 27

Condition: good (used), Probat HDF 100 rotary valve overall dimensions: 140 cm long, 45 cm wide, 55 cm high. Inlet opening: 46 cm x 9.5 cm. Weight: 270 kg. Knodowgl A Depfx Afkja

Condition: ready for operation (used), Year of construction: 2001, Offered is a valve bag filling system (50kg) with connected palletizer. Bag type: valve bags (paper, PE or PP), filling weight: adjustable up to max. 50kg, piping system with integrated conveying screw / dosing screw, pneumatic bag clamping, weighing unit, discharge conveyor belt. Automatic layer palletizer - Ehcolo PM 400. Year of manufacture: 2001, capacity: up to approx. 400 bags per hour, incline conveyor / bag flattener, empty pallet magazine, complete machine enclosure. Inspection possible by arrangement. Knsdpfx Afoylzg Uoksa

Condition: ready for operation (used), Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible. Knjdpfx Asyv H E Eofksa

Condition: ready for operation (used), Type ACC 2.4 Kjdpfxsd H Ncpj Afkjna

Condition: used, Available: 2 units Used pneumatic valve manifold from Festo with five solenoid valves from the VSVA series. Manufacturer: Festo Knedszmm Hnepfx Afkea Device type: Valve manifold Valve type: VSVA-B-P53E-ZD-A2-1T1L Number of valves: 5 Operating mode: Solenoid valves Nominal voltage: 24 V DC Pressure range: 3 to 10 bar Pressure range: 45 to 145 psi Connection type: Pneumatic plug-in connectors Application area: Pneumatics and automation technology Condition: Used

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg Knsdpfx Afohkzu Ajkea - immediately available - Subject to prior sale

Condition: new, Hydraulic winch HAW3000 with electric valve and remote control for wheel loaders, excavators, cranes, mini-excavators, tractors for use in viticulture, horticulture, civil engineering, construction, and many other applications. The hydraulic attachment winch HAW3000 simplifies many tasks. Knodpfxsfn Tu Ts Afkea Maximum rope capacity at 3000 kg pulling force: 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 70 m with 6 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 70 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1000 kg pulling force: 220 m with 4 mm synthetic rope. Standard equipment: 30 m of 8 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on forestry cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M12 threaded holes. This offers many possibilities for attaching the winch. (The threads are cut and painted. They must be re-cut before use for rust protection.) Large, greaseable rope pulley for a long service life of the wire rope. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow up to 125 l/min, briefly max. 150 l/min ⦁ Maximum pulling force: 3000 kg ⦁ Rope speed: 100 m/min at an oil flow of 125 l/min ⦁ Weight: 95 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you.

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Knedpfxodf Ud Ss Afkoa Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, Hydraulic winch HAW4000, without valve, for wheel loaders, excavators, cranes, mini-excavators, tractors, and agricultural machinery in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many tasks. Maximum rope capacity with 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity with 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity with 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg pulling force: 150 m with 6 mm synthetic rope. Knodpfx Afefn Tviskoa Maximum rope capacity with 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on skidders and excavators ⦁ As a winch for tractors, construction machines, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They must be re-cut before use to ensure rust protection.) Large, greaseable cable pulley for a long service life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm