Used Gantry Mill for sale (501)

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Ident No. 247238 0001 Year of manufacture: 2000 Axis movement: 2400 mm Carriage length: approx. 500 mm Total length: 3520 mm - Pneumatic feed gripper (clamping gripper with 2 Festo compressed air cylinders) - Standard linear guide 65 x 25 mm - Steel base profile - Ball screw Ø 32 x 10 mm - pneumatic with position indicator - Permanent servo motor type: MKD071B-061-KP1-KN (Part no.: 261989, p. no. MKD071-50234, brake with 24 V DC) Overall dimensions L x W x H: 3520 x 400 x 580 mm Rsdpfx Aajgi E Hae Esck Weight: 340 kg good condition possible drive controllers under stock no. 53628 and stock no. 53673

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC portal milling machine with integrated C-axis and interchangeable milling heads. Heidenhain TNC 430 control X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm In 2018, the complete hydraulic system of the Heynumill was renewed, all electrical cables were replaced, the spindle cooling unit and both longitudinal conveyors were renewed, and the heads were fully overhauled. The total refurbishment cost €160,000. In 2020, the milling gearbox was replaced. Rcjdpewthz Aofx Aa Esk Further technical data see PDF file.

Year of construction: 2007, condition: used, Offer 22111 Technical specifications: - HADEF Type CH 2 hoist, built in 2007, load capacity 500 kg - Portal load capacity 500 kg - Hook height approx. 2450 mm - 2 lifting speeds 8.0 + 2.0 m/min - Manual trolley - Clearance between the traveling columns approx. 2750 mm - Clearance height at the bottom edge of the portal beam approx. 2900 mm - Mobile beam approx. 1500 mm - 4 swivel casters Rcsdpjv S Du Rjfx Aa Ejk - Total width approx. 3050 mm - Total depth approx. 1500 mm - Total height approx. 3050 mm - 400 V drive - Total weight – crane + hoist approx. 250 kg

Condition: used, Year of construction: 2011, Sinks (see attached images) Gantry Eagle 500 Year of manufacture: 2011 Travel paths: x/y/z = 525x400x450 Tool changer: 24 positions Weight: 5000 kg Rcodpfx Aajw D Hcgj Eok

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: KA20+23, ABUS Crane Overhead Crane Bridge Crane Indoor Crane The crane is available twice in identical construction!! Optionally available: 2x 20m HEA220 crane rails, 4 supports (window side), and 20m Vahle conductor rails Load capacity / lifting capacity 1t - 1000KG Track gauge 9500mm, external dimension approx. 9750mm Redpfx Ajxdv Nmja Esck Year of manufacture: 1990 with pendant control Lifting height 6m Hoist: GM chain hoist, 4m lift Construction height (top edge of crane to hook) approx. 600mm End carriage length with buffers approx. 220cm Crane is dismantled and immediately available Very good condition, inspection book is available Column slewing cranes and wall slewing cranes are also available Demag KBK and Abus HB systems as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight possible, please enquire with postcode Collection preferred

Condition: refurbished (used), Year of construction: 2002, Operating travels of the axes for the CERUTI 25 model X Axis: Working travel 10000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Y Axis: Working travel 2500 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Z Axis: Working travel 1000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. A Axis: Working travel +/- 95°. C Axis: Working travel +/- 200°. T Axis: Continuous travel. Rcjdpfev D U Ifex Aa Esk Operating speeds of linear axes X, Y, Z Axes: 20.000 mm/min. Axis accelerations X Axis: 1000 mm/sec². Y, Z Axes: 1000 mm/sec².Note: Accelerations may vary depending on the installed CNC type. Spindle Type: ISO 40, ISO 50, Electrospindle HSK A63. Power: 30 KW. Torque: 280 Nm. Maximum speed: 12.000 rpm. Mounted tool holder type HSK A63. Tool changer type S.G.M. Number of positions: 20, 30, 74. Max diameter for adjacent positions: 100 mm. Max diameter for non-adjacent positions: 200 mm. Maximum length: 300 mm. Maximum tool weight: 12 Kg. Tool change time: 20 sec. Technical data are subject to change without prior notice.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 12 m/min, total length: 11,000 mm, table length: 4,500 mm, table width: 1,250 mm, total width: 4,645 mm, spindle speed (max.): 3,000 rpm, total height: 4,170 mm, workpiece weight (max.): 10,000 kg, rotational speed (max.): 5,000 rpm, overall weight: 30,500 kg, Milling machine retrofitted in 2016 ACCESSORIES: Portable Handwheel: Heidenhain HR-410 Chip Extractor: 2 ATC Tool Changer: 30 Tool measuring probe: Yes Renishaw: Yes External Cooling: Yes Cooling through the spindle: Yes CE Fairing: Yes Rcjdpfjul S Syox Aa Eok

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table length: 4,000 mm, table width: 1,500 mm, tank capacity: 500 l, SHW PowerSpeed 5 Travel Ranges • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle horizontal): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Speed Rcodpew I Rz Hjfx Aa Esk • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head swivel range (mounting): 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Short-term: 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Plate • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 l Splash and Chip Protection • One-sided, with 2 manually sliding doors About the Company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts delivery, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - CNC control modernization ----- _____ Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring and milling machine – used metal milling machine – used metal mill – used metal machining center – used cnc mill – cnc milling machines – milling machinery – large part machining – cnc large part machining – milling – shw – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column-type milling machine

Condition: new, functionality: fully functional, machine/vehicle number: 246203 xxxx, Ideal basis for setting up CNC machines and applications Rodpfx Ajhqmamja Esck The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: new, Year of construction: 2025, travel distance X-axis: 12,000 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 5,400 mm, STOCK NUMBER ONY100000578 MODEL YEAR 2025 CONTROL PANEL HEIDENHAIN TNC 640 AXIS MOVEMENT X 12.000 MM / Y 6.500 MM / Z 4.500 MM INTERCHANGEABLE SPINDLE HEAD TYPES 6 1-)5001 MILLING ANGLE HEAD TYPE VP2 SPINDLE TAPER SK 50 / BIGPLUS SPINDLE SPEED (CONTINUOUSLY) 20– 4.000 REV. / MIN MAX. TORQUE OF SPNDLE 1.000 Nm MOTOR POWER OUTPUT ON THE MAIN SPINDLE 41 kW SPEED OF SPINDLE TURNING AROUND VERTICAL AXİS 1 - 1.800 °/ MIN MAX. TORQUE ARROUND THE VERTİCAL AXIS 2.500 Nm 2-)5005 MILLING ANGLE HEAD TYPE VP14 SPINDLE TAPER SK 50 SPINDLE SPEED (CONTINUOUSLY) 20– 4.000 REV. / MIN MAX. TORQUE OF SPNDLE 400 Nm Rcedpfx Aajx Iutno Esk MOTOR POWER OUTPUT ON THE MAIN SPINDLE 15 kW SPEED OF SPINDLE TURNING AROUND VERTICAL AXİS 1 - 1.800 °/ MIN MAX. TORQUE ARROUND THE VERTİCAL AXIS 2.500 Nm 3-) MILLING ANGLE HEAD TYPE VPZSPEC. SPINDLE TAPER HSK-80A SPINDLE SPEED (CONTINUOUSLY) 20– 3.000 OT / MIN MAX. TORQUE OF SPINDLE 400 Nm MOTOR POWER OUTPUT ON THE MAIN SPINDLE 20 kW SPEED OF SPINDLE TURNING AROUND VERTICAL AXİS 1 - 1.800 °/ MIN MAX. TORQUE ARROUND THE VERTİCAL AXIS 2.500 Nm 4-) 1.1.2.1 STRAIGHT MILLING HEAD VA1 SPINDLE TAPER 7/24 ČSN ISO 9270-1(22 0435) SK 50 / BIGPLUS TOOL CLAMPING COLLET TYPE SPINDLE SPEED (CONTINUOUSLY) 20 – 4.000 RPM MAX. SPINDLE POWER S1-100% / S6-0% 41 kW MAX. SPINDLE TORQUE 2.000 Nm 5-) 5008 UNIVERSAL MILLING HEAD VO SPINDLE TAPER SK 50 SPINDLE SPEED (CONTINUOUSLY) 20 – 4.000 RPM TOTAL MOTOR OUTPUT ON MAIN SPINDLE 41 kW MAX. SPINDLE TORQUE 1.250 Nm SPEED OF SPINDLE TURNING AROUND AXIS ( C ) 1-1.800 °/ MIN MAX. TORQUE OF HEAD SWIVELING AROUND AXIS ( C ) 2.500 Nm 6-) 1.1.2.2 FULLY CONTINUOUS 2 AXIS MILLING HEAD VS SPINDLE TAPER 7/24 ČSN ISO 9270-1(22 0435) SK 50 SPINDLE SPEED (CONTINUOUSLY) 20 – 4.000 RPM TOTAL MOTOR OUTPUT ON MAIN SPINDLE 41 kW MAX. SPINDLE TORQUE 1.000 Nm ROTATION RANGE AROUND THE VERTICAL AXIS + / - 180° ROTATION RANGE AROUND THE CROSS AXIS + 120 ° / - 120 ° AXIS TO PERPENDICULAR TO CROSS AXIS 1-1.800 / 1-3.600 °/ MIN MAX. TORQUE AROUND CROSS AXIS 2.500 / 2.100 Nm CHAIN TOOL MAGAZINE TYPE R100 TOTAL POWER REQUIREMENT 240 KVA DIMENSIONS OF THE MACHINE 15.90 X 24.20 X 7.50 M

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD431+432, ABUS overhead crane, crane runway, bridge crane, indoor crane, crane There are 2 identical cranes available!! Load capacity / lifting capacity: 1t - 1000 kg Span: 11,250 mm, external dimension approx. 11,500 mm Year of construction: 1989, with floor control Lifting height: 6 m Hoist: GM1010 F6 Overall height from top of crane to hook approx. 610 mm (320 mm girder + 290 mm hoist) Redpoxdvncofx Aa Esck End carriage length with bumper approx. 228 cm The crane is dismantled and available immediately Very good condition, inspection book available Column-mounted slewing cranes and wall-mounted slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible, please inquire according to your postal code Collection preferred

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Pressure of the cylinders of the gate 2: 2 x 1228 kN Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gate travel: 1420 mm Equipment: Rsdpfohktq Asx Aa Esck - two gates - table - working cylinders x 4 - gate travel cylinder - working cylinder travel cylinder - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, overall weight: 14,000 kg, Equipment: rotational speed infinitely variable, Milling machine retrofitted in 2024 Rcedpfx Aoul Txzja Eok CNC TNC 530 HEIDENHAIN Distance between columns 1250 mm HSK 63 ELECTROMANDRINO spindle 12.000 rpm INTEGRAL fairing

Condition: used, Table 4000 x 2000 mm X-axis travel 4000 mm Y-axis travel 2350 mm Z-axis travel 850 mm Distance between columns 2250 mm SELCA control BT 50 tool Rcsdjwkqw Iepfx Aa Eok Permissible weight on table 22,000 kg Machine dimensions (width x length x height) 6,000 x 12,000 x 5,000

Condition: used, Year of construction: 2004, machine/vehicle number: 575259, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, For sale is a high-quality sinker EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideal for precise EDM operations in tool and mold making, and comes equipped with an extensive range of features. 🔍 General Information: Manufacturer: OPS Ingersoll Model: Gantry 800 Machine No.: 575259 Rjdpfxew Ig A Ho Aa Esck Year of manufacture: 2004 Origin: Made in Germany Condition: Used, well-maintained, and fully operational ⚙️ Technical Specifications: Travel distances (X/Y/Z): 550 x 850 x 450 mm Worktable size: approx. 800 x 1000 mm Max. head load: 200 kg Max. clearance: 585 mm Max. traversing speed: 12,000 mm/min 💡 Equipment & Features: 30-position tool changer, EROWA Mitsubishi 64-bit CNC control (separate control panel) Programming software: MultiProg Control technology: Multipulse PRO Chuck: ER-016841 Integrated CO₂ fire extinguishing system Cartridge filter unit Dielectric cooling system by Weinreich Industriekühlung Extensive accessories and connection cables available ⚡ Electrical Data (as per type plate): Supply: 400 V / 3~ / 50 Hz Control voltage: 24 V AC / DC Power consumption: 17 A Fusing: 25 A Wiring diagram no.: 107258 Errors, typos and prior sale excepted.

Condition: used, Technical data can be found in the drawing. Load capacity: 4 x 5000 kg Crane runway length: 15.3 m Only the frame is for sale without the lifting mechanism! Redpfx Aajt N Ilws Eock

Year of construction: 2001, condition: good (used), machine/vehicle number: KBK3, DEMAG KBK crane headliner crane runway dimensions approx. 20 x 9 m Track length can be combined variably !!! Any size is possible. Redpfxjhvpzhe Aa Ejck Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK2 rails, bridge made from KBK3 Mounting height variable, chain length approx. 4 m The system is delivered complete: -KBK rails, rail connectors - Undercarriages, end plates, cable towing, holders/hangers, etc including bridge with Demag 0.25 to chain hoist Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items! Dispatch by forwarding agent, please ask for postal code. Please ask for other dimensions or shipping prices, we will make you a non-binding offer immediately!

Year of construction: 2023, operating hours: 100 h, condition: as good as new (ex-display), functionality: fully functional, load capacity: 1,600 kg, Motorized gantry. Height under beam 9M Motorized trolley stroke 4.5M Capacity 1600 Kgs Rjdpevrih Nefx Aa Esck Wired remote control and Wireless remote control. Photos on request

Year of construction: 2022, operating hours: 5 h, condition: like new (used), functionality: fully functional, load capacity: 20,000 kg, Portal crane with 2 x 10 tons Kito Electric Hoists ER2. 10 meter hoist Power supply: 3x380 -415 volts 50/60 Hz Operating time. 5 hours. Statics and user manual can be sent on request. Rcodpfx Asvyc Huea Eek

Condition: good (used), CHARACTERISTICS Table; 4000 X 1250 X axis travel; 3500 mm Y axis travel; 2500 mm Z-axis travel; 800 mm Distance between columns; 2300 mm Spindle RPM; 5,000 rpm Control; FIDIA Electronic handwheel Universal head Tool; BT 50 Motor power; 30 Kw Feed rate; 5000 mm / min Rapid traverse; 15.000 /12.000mm / min Rjdpfxer I Ax Ro Aa Eeck Permissible weight on the table; 10.000 kg Machine dimensions (width x length x height); 4262 x 10748 x 4400 Weight; 25.500 kg

Year of construction: 2002, condition: good (used), machine/vehicle number: SIKBK, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Rcedpfomqf Nbsx Aa Esk Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Year of construction: 2022, operating hours: 5 h, condition: like new (used), functionality: fully functional, load capacity: 30,000 kg, Portal crane with 2 x 15 tons Kito Electric Hoists ER2. 10 meters hoist Power supply: 3x380 -415 volts 50/60 Hz Operating time. 5 hours. Statics and user manual can be sent on request. Rcodpfju T Izfox Aa Eek

Year of construction: 1987, condition: excellent (used), machine/vehicle number: Abus 2to MM2, ABUS crane sky crane runway bridge crane indoor crane crane Payload / lifting load 2t - 2000KG, track about 2700mm External dimensions approx. 3100mm approx BJ 1987 with corridor control Overall height from top edge of crane to hook approx. 900mm Head carrier length without buffer approx. 2200mm Crane is dismantled, stored and immediately available. Very good condition Rodpfx Ajifyhhea Eock There are also pillar slewing cranes and wall slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agency possible, please ask for postal code Collection preferred

Year of construction: 1996, condition: excellent (used), machine/vehicle number: MBMA101, Abus / Hert - year of manufacture 1996 / conversion 2014 1-girder suspension crane, bridge crane, crane track, hall crane, gantry crane Payload 1000KG Crane is available 2x: Chassis can be adjusted to the carrier size up to approx. 10-16cm. Incl. complete control, floor operation using a control bottle 2 lifting speeds, 2 strands All cranes can be moved completely electrically in all 3 axes Lifting height/hook travel approx. 6m Connection to 400V 16A, built in 1996 Very good used condition Shipping by courier, collection preferred Rjdpfsqqhf Dsx Aa Ejck Location 75053 Gondelsheim Please inquire about shipping prices according to zip code, we will make you an immediate, non-binding offer!

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: F32/16, ABUS EHB overhead crane crane runway with cantilever supports Dimensions approx. 8.2m x 4.8m, payload / lifting load 1x 250 KG - 0.25to Technical data of the system: Crane runway made from ABUS HB180 rails Approximate dimensions as follows: External dimensions - space requirement approx. 8.2m x 4.8m with 1 bridge 250KG payload Rjdpfxjmi S A Ao Aa Esck Top supports 4.05m Top rail 3.88m UK running rail 3.70m Upper bridge 3.62m UK bridge 3.46m Hook height 3.05m Track width 3.8m Internal dimensions of supports 4.46 m Rail length 8.2m Bridge length 4.4m Base plate of the support 50x50cm Support HEA180 Support spacing 7.88m All supports can be set up variably. The system is delivered complete: ABUS HB rails, trolleys, end plates, cable drag, holder/hanger, chain hoist with control bottle, 4x supports, etc. Crane is dismantled and available immediately Inspection book is available Item location is 75053 Gondelsheim Almost new condition, see pictures There are 10 different systems available, please ask for your size! Dispatch by forwarding agent or pick-up only by appointment