Used Gang Saw for sale (6,989)

Year of construction: 1980, condition: ready for operation (used), Band saw machine Ijdpfxemp Trwe Aa Eotr Make KÖLLE Type:ST 105 Year 1980 overhang 1050 mm with saw band - welding device IDEAL . Infinitely variable speeds. Machine ready for use condition.

Condition: new, Year of construction: 2022, functionality: fully functional, Holtec ES 121 SHK 4 m Year of manufacture: 2022 Control: Simatic HMI Saw chain: 4788 (190 cm) Guide bar: 3322 (190 cm) Sawn timber data: Packages for cutting: Max. 4200, an.= 1200 al.= 1200, Minimum: 2,500 Packages after cutting: max: 4,000, min: 700 Cutting waste: max. 300 Operating voltage: 400 V 50 Hz Itodpfox Dmavjx Aa Esr Oil filling: HLP-D-32 Tank capacity: 70 l Pressure: 70 bar The machine is unused and dismantled. Inspection possible at any time.

Condition: used, Year of construction: 2002, functionality: limited functionality, saw blade diameter: 450 mm, feed length X-axis: 9,000 mm, Automated drilling and sawing machine for processing steel profiles and flats. The machine is equipped with an automated 3-axis drilling unit and a circular saw for automatic profile processing. This is an ideal machine for a starting steel constructor who wants flexibility and the ability to produce profiles easily. The machine can drill and saw profiles up to 450mm wide. The machine is available at an attractive price, as the horizontal drilling motors require some attention (the bearings need to be replaced and one of the gearbox housings needs to be replaced). The asking price is for the machine 'as is', without transport/installation, etc. There is also the option to purchase repair, transport, and installation services, which can be discussed on site. Price upon request. Isdpfxsx E S A Ue Aa Ejtr

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm square: 100 mm rectangular: 180 x 100 mm at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Itodpfx Asx Ek A Toa Esr Weight: 390 kg

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Iodpfx Asx Avtvsa Eetr Weight: approx. 180 kg

Condition: used, Year of construction: 1999, cutting diameter max 400 mm mit Sägeblättern weight of the machine ca. 1,4 t Isdpfxjw Sygme Aa Eotr

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Iodpfstwn E Uex Aa Eotr Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: used, mileage: 910,000 km, power: 340 kW (462.27 HP), first registration: 11/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: mechanical, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, parking heater, soot filter, Super Space Cab with skylights Roof spoiler + side fenders ZF Intarder 16-speed manual gearbox Refrigerator under couch 2 sleeper berths Auxiliary air conditioning Auxiliary heating Itjdpfx Aotxfxzoa Eer Air conditioning CB radio VA: 2-leaf parabolic suspension HA: air suspension Tires: 315/60R22.5 Spare wheel holder right 850 l diesel tank left Roof bar with 4 headlights Subject to errors, modifications and prior sale.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 22512.08, saw band length: 4,240 mm, saw band speed: 1,767 mm/s, remaining piece length: 90 mm, controller model: Mitsubishi E1032, TECHNICAL DETAILS Saw cut length: 3 mm - 9,999 mm Cut length in automatic operation: unlimited Remnant piece length in automatic operation: 90 mm Material feed per stroke: 950 mm Material support height: 850 mm Saw blade dimensions: 4,240 x 34 x 1.1 mm Band speed: 17 – 106 m/min MACHINE DETAILS NC program control: Mitsubishi E1032 PLC control: Mitsubishi Coolant tank: 50 l Dimensions & Weight Isdpfx Ajx Hz Hrsa Estr Dimensions (L x W x H): 2,000 x 2,580 x 2,000 mm Net weight: 2,300 kg Gross weight with pallet: 2,350 kg Power Supply Input: 400 V Frequency: 50 Hz Input protection: 20 A Drives Saw motor: 4.0 kW Hydraulic motor: 1.1 kW Coolant pump: 0.09 kW Electrical Power Total installed electrical capacity: 4.19 kW Control transformer: approx. 250 VA EQUIPMENT High-performance bandsaw Heavy-duty hydraulic production bandsaw Parallel feed carriage system on profile guideways Siko incremental encoder Material feed with ball screw spindle Hydraulic material clamping with long-stroke cylinder Material clamping with double vice before and after the saw blade Roller conveyor 6 m

Condition: used, Year of construction: 2008, Type EBT 120 Panel saw 4400x2200 Workpiece length min-max mm 4400 Workpiece width min-max mm 2200 Saw blade projection 122 mm Saw carriage feed 1-150 Program pusher feed min-max m/min 100 Saw blade diameter mm 430 Itedpjx I Sp Tefx Aa Eer Main motor kW 15 Stepless feed Scoring unit 2.2 kW Workpiece length min-max mm 4400 Workpiece width min-max mm 2200 Stepless feed

Condition: good (used), Year of construction: 1990, From liquidation: Mössner Rekord SSF 520 Year of construction 1990 Itedpfx Asviym Dsa Eor NR.27968 Stepless speed from 15-2350m/min 4 gears Band welder BSSO25 Air pump Work light Grinding stone Table swivels left15°-right45° Table size 790x740mm Clearance vertical 390mm--horizontal 500mm-- Height of the machine 2100mm Weight approx. 700kg

Condition: new, Band saw machine Make: OPTIMUM Ijdpfx Aaodynpcs Eotr Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: ready for operation (used), Year of construction: 1990, Automatic band saw AMADA, Model: HFA 250 W, Year of manufacture: 1990 Cutting range, round material: 30–250 mm Square: 270 mm x 250 mm Iodjxyx A Iepfx Aa Eetr Machine is in ready-to-operate condition. Machine documentation available.

Condition: excellent (used), Danobat CP11.11 Horizontal Bandsaw Year 2009 Serial Number 0909901302 Max Size 1100mm x 1100mm Additional Features Year 2009 Isdpfexwk Idex Aa Eetr Variable Speed Front & Rear Tables Total Power 16kw Total Weight 10800kg

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Itodpfxjxnlgcs Aa Esr Storage location: Garbsen

Condition: used, Martin type T70 panel saw for edging and sizing wood and other panel materials. Sled length: 2.500 mm Iedpfoxqfghsx Aa Estr cutting height: about 100 mm

Condition: not inspected (used), Year of construction: 1981, functionality: unexamined, machine/vehicle number: 3124, Edging saw Esterer DKV-5S The machine has already been dismantled Iodsuy Ib Ijpfx Aa Eotr Year of manufacture: 1981 55 kW saw motor Without electrical installation With extraction system ASV/B Year of manufacture: 1981 The machine is being sold as is.

Condition: good (used), Year of construction: 1980, functionality: fully functional, Band Saw Kasto BSM 420Article number: 19-03-028Manufacturer: KastoGood overall conditionMachine workshop-testedDelivery time: Immediate - Sale subject to prior saleYear of manufacture: approx. 1980Dimensions (L x W x H): approx. 1300 x 800 x 1400mmWeight: approx. 1000kgSaw blade dimensions: approx. 650 x 55 x 2.5mmCutting area: 90 degreesRound: approx. Ø420mmSquare: approx. 300 x 300mmFlat: approx. 420 x 420mmCutting area: 45 degreesRound: approx. Ø320mmSquare: approx. 260 x 260mmFlat: approx. 320 x 260mmMiter cutting: approx. 0-45 degreesAccessories:Adjustable cutting pressureAdjustable stroke rateCoolant systemFoot switchRotary tableFurther accessories on requestPrice and additional technical data on request Iodjwl Aprspfx Aa Ejtr

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Isdpfjxz Hhzsx Aa Ejtr Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: used, Year of construction: 2005, Technical Data: Cutting Capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest remnant length: 35 mm Iedpfx Aasx Irx Io Ejtr Total connected load: 2.0 kW Saw motor, frequency controlled output: 1.5 kW Infinitely variable cutting speed (frequency controlled): 20 – 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and Weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height (upper section lowered), approx.: 1460 mm Height (upper section raised): 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Carbide saw blade guides, replaceable - Mechanical material clamping - Hydraulic feed for cutting - Mechanical saw blade tensioning - Saw blade cleaning by a driven, easily replaceable wire brush - Coolant system: feed via 1 coolant nozzle and 1 coolant hose, tank capacity approx. 45 l, pump performance 16 l/min

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Weight 570 kg Total power requirement 3 kw Itjdpfx Aev A Hgdsa Esr

Condition: used, Year of construction: 2007, Carriage length: 3000 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: handwheel Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 2800 / 4000 / 5500 rpm Motor power: 7.5 kW Extraction connection: 80 and 120 mm Machine length: 3500 mm Machine width: 1900 mm Itedpfxjx I Ah Ts Aa Eer Weight: 1200 kg

Condition: excellent (used), Year of construction: 2017, Holzkraft Bandsaw HBS 940 AS – Top Condition – Very Low Hours – DESCRIPTION - Heavy-duty design with high dead weight for maximum running smoothness - Especially quiet and precise operation thanks to a torsion-resistant machine frame Itjdpfexz Ulzex Aa Eor - Cast iron flywheels with rubber coating and cleaning brush - 3-roller precision blade guides standard, above and below - Large grey cast iron saw table, tiltable from 0° to +15°, ground and polished surface - Large cast iron parallel fence with round bar guide, easily adjustable - Saw blade tension indicator - Precise cutting height adjustment via rack and pinion, with millimeter scale - Self-braking motor TECHNICAL DATA Dimensions and weight Length (product) approx. 1550 mm Width/depth (product) approx. 920 mm Height (product) approx. 2900 mm Weight (net) approx. 860 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Work table(s) Table length: 1250 mm Table width: 800 mm Table height: 1060 mm Table tilt: 0 - 20° Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Cutting range Max. cutting height at 90°: 560 mm Max. cutting width: 910 mm Bandsaw blade Blade speed: 1550 m/min Flywheel diameter: 940 mm Blade length: 6690 mm Min. blade length: 6630 mm Max. blade length: 6700 mm Min. blade thickness: 0.8 mm Max. blade thickness: 0.9 mm Blade guide: precision guide above and below Location: ex-stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Itjdpov A E Ndefx Aa Eor Weight 1600 kg Total power requirement 7,5 kw - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg

Condition: used, Cutting height at 90°: 135 mm Itjdpfx Aajx I Ai Dj Esr Cutting length: mm Mitre range horizontal: - Mitre range vertical: -60° to +60° Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Workpiece clamp: yes Spray device: yes Extraction port: 100 mm Machine length: Machine width: Weight: 110 kg