Used Fume Cupboard for sale (471)

Condition: good (used), Year of construction: 2016, operating hours: 3,890 h, filter area: 222 m², suction capacity: 20,000 m³/h, IVAT 20000 m3/h filter ventilation tower Industrial welding hall filtration - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Brand: IVAT Model: Air FTower-20.000 Year of production 2016 Working hours: 3890 Parameters: 15 kW fan Air flow 20000 m3/h Filter surface 222 m2 6 cartridge inserts Built-in frequency converter. Additional final fine filter with an area of 65 m2 in filtration class F9 gives us higher air purification efficiency and additionally protects the fan in the event of damage to the main filter. Dust drawer with a capacity of 200 l. Nlsdpfsvrgbtex Aa Esk Very quiet operation 75 dB (A) Purification degree - > 99.9 % Stock no.: 0944

Condition: new, Never used Year of production: 2017/2018 Quantity: 5 pieces Never used Year of production: 2017/2018 Quantity: 5 pieces Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Nlodpjtu Udiefx Aa Ejk Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Recycling of materials - approximately 95% of weight Noise level - 70 dB(A)

Condition: good (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, Plymovent Diluter – Welding Fume Extraction System The Plymovent Diluter is a stand-alone air purification unit specifically engineered for welding workshops. Unlike traditional ducted ventilation, the Diluter recirculates and cleans air within the workshop, eliminating the need for external ducting. Clean, filtered air is discharged horizontally from overhead modules, establishing an optimal airflow pattern that continuously dilutes and removes welding fumes from the operators' breathing zone. Key specifications & features: - Airflow capacity: specifically designed for medium to large-scale welding workshops Nlsdpfjxf Iqrsx Aa Ejk - Installation: Stand-alone unit – no ducting or complex extraction system required - Filtration: Fitted with high-efficiency filter cartridges, replaced at prescribed intervals - Operation: Automatic fan control with uniform horizontal air distribution - Maintenance: Serviced by the official importer, regular filter replacement ensured - Construction: Robust industrial-grade build suited for continuous operation Benefits: - No investment needed for expensive ductwork or ventilation installation - Ensures a healthier and cleaner working environment for welders - Compact footprint, easily integrated into existing workshop layouts - Supported by Plymovent’s expertise – a Dutch manufacturer specializing in welding fume extraction systems globally The offered unit is in excellent condition, fully serviced, and ready for immediate use. Filters were changed one month ago.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, We have three units in stock, price is for one unit only. Good working condition. Please check out our other listings as well. Nljdpfx Aowkwn Tsa Ejk

Condition: new, Year of construction: 2025, functionality: fully functional, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Default equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction efficiency 3900 m3/h Bag capacity 220 L Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1200×570×2250 mm Weight 64 kg Nodjvu A Diepfx Aa Eelk Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: not inspected (used), Welding fume extraction,dust extraction,self-cleaning filter,pneumatic,vacuum. For welding,grinding,sandblasting and all kinds of dry dust. Nodeip Nktspfx Aa Ejlk Cartridge filter cartridges. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan of 3,2 Kw Efficiency 1600 m3/h

Condition: excellent (used), Year of production: 2017/2018 Quantity: 5 pieces Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Nlodpetvf Ensfx Aa Eek Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Recycling of materials - approximately 95% of weight Noise level - 70 dB(A)

Condition: new, functionality: fully functional, Year of construction: 2025, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Nlsdpfsvu Artox Aa Eok Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Standard equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction off efficiency 3900 m3/h Bag capacity 150 L Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1400×570×1960 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Year of construction: 2000, condition: good (used), Welding fume extractor,dust extractor,self-cleaning filter,pneumatic,vacuum brand ESTA Model: SRF P13 JET For welding,grinding,sandblasting and all kinds of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. 3 Kw fan Efficiency 1850 m3/h Filtration area - 15 m2 Vacuum pressure - 4300 Pa Nlsdpsirt Amofx Aa Eek Inlet diameter - 2 x 160 mm Year of manufacture: 2000

Condition: used, suction capacity: 1,000 m³/h, Welding fume extractor, dust extractor , self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding and all kinds of dry dust. Cartridge filter cartridges. In addition, HEPA filter for more thorough cleaning. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan of 1.6 Kw Nledjrywfvopfx Aa Ejk Efficiency 1000 m3/h

Year of construction: 1991, condition: good (used), Dust extraction,welding fume extraction,filtering,self-cleaning filter,pneumatic,vacuum dust collector,absorber for plasma,laser,sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF18 Cyclo - with pre-separator Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter cartridges. Njdpfxomrm Raj Aa Eolk 7.5 Kw fan Capacity 6000 m3/h Underpressure 3000 Pa Filtration area 378 m2 Inlet diameter - 350 mm Ultra WEB filter cartridges 18 pcs.

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Nljdpsunh Uvsfx Aa Eek Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. 4 Kw fan Capacity - 800 m3/h Nedpfopgnfdsx Aa Eelk Herding® DELTA or DELTA² filter elements Filtration area - 14.56 m2

Condition: good (used), Year of construction: 2007, functionality: fully functional, filter area: 64 m², suction capacity: 4,500 m³/h, negative pressure: 3,200 Pa, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser , sandblasting, soda blasting, shot blasting and all kinds of dry dust. Brand : ESTA Nledpovkd Rpefx Aa Eok Model : DUSTEX F-64 The filter is cleaned by compressed air pulses during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Parameters : Capacity - 4500 m3/h Vacuum - 3200 Pa Filtration area - 64 m2 Cartridge filter cartridges - 4 pieces. 4 Kw motor. Inlet diameter - 280mm Complete with HEPA filter of filtration class H13 The device from the year 2007

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Nljdpfon Nw Ntsx Aa Eek Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: good (used), Year of construction: 1998, filter area: 84 m², suction capacity: 2,000 m³/h, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. Built-in 4 Kw fan Capacity of 2000 m3/h Filtration area 84 m2 Cartridge filter cartridges - 4 pieces. Inlet diameter 200 mm Nsdpjttkgxsfx Aa Eelk Length - 1.80 m width - 1.10 m height - 1.80 m

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Nedpfx Aotpui Ioa Eelk Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: excellent (used), Year of construction: 2018, operating hours: 3,934 h, suction capacity: 18,000 m³/h, negative pressure: 2,000 Pa, IVAT Air Tower 18000K Filtration Tower Filtration of industrial welding halls - numerous technological processes in production plants, carried out mainly in metal processing. Suction at the top and draft-free exhaust at the bottom - right into the work areas. The principle of stratified filtration, the device does not require the installation of pipelines. Cartridge filter cartridges - self-cleaning by means of compressed air pulses during operation. Cleaning of filters by means of pressure difference - no loss of compressed air. The principle of stratified ventilation : contaminated air is drawn in from above, filtered, and then released at floor level as clean breathable air without generating drafts, at speeds of less than 1.2 m/s. Exactly where workers inhale it. And that's over a wide 270-degree range. In doing so, the tower operates according to the principle of layered ventilation, recommended by labor unions and considered the best type of air circulation. Year of production 2018 operating hours : 3934 Parameters: 11 Kw. fan with frequency converter Air flow rate 18000 m3/h Filtration area of 150 m2 6 pieces of cartridges Very quiet operation Degree of purification - > 99,9 % Equipment: - IVAT.Energy package 11-18.5.(Siemens Frequency converter) - Control of the IVAT device in the room(fully automatic). - IVAT.Temperature control (Temperature control and monitoring) - IVAT Spark fire protection(sparks and fire sensors in the tower) Nlsdpfx Aaetrwzws Eok - IVAT.Industrie-Energie4.0 (SPS Siemens + Ethernet remote maintenance + full graphics Display + connection to control center Fire alarm + energy manager) Dimensions: width - 1900 mm depth - 1530 mm height - 3600 mm

Condition: excellent (used), Year of construction: 2012, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Nlodpfx Aajiypxis Eok The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. The device is equipped with a pre-separator and a mechanical spark trap. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit Model: DFPRO 12-CYCLO Year of production - 2012 Donaldson Torit Ultra WEB patron filter cartridges - 12 pcs. Filtration area of 215 m2 18.5 Kw fans. Capacity 11000 m3/h Vacuum 3900 Pa Inlet diameter - 500 mm We also offer on request new filter cartridges tailored according to the purpose of the device. Dimensions: height - 5.00 m length. - 3.50 m width - 1.70 m weight - 2200 kg

Condition: good (used), Dust extraction,welding fume extractor,self-cleaning,pneumatic,vacuum filter KELLER Uni-Star XK. For plasma,laser,sandblasting,sodding and all kinds of dry dust. The fan is placed behind the filter on the clean side which reduces the risk of explosion initiation to a minimum. Fan with a power of 1.8 Kw Panel filter cartridges of the "Multituba" type Nsdpsivtqbefx Aa Ejlk Capacity 800 m3/h

Condition: used, Year of construction: 2009, suction capacity: 16,000 m³/h, negative pressure: 2,500 Pa, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. 15 Kw fan Capacity 16000 m3/h Vacuum 2500 Pa Filter cartridges - 13 pieces. Filtration area 260m2 Inlet diameter - 2x 560 mm Year of production - 2009 Dimensions of the device: height - 2.70m width - 5.70m x 1.85m Nljdpfxjrk Itcj Aa Eok weight - 2600kg

Year of construction: 1996, condition: used, Dust extraction,welding fume extractor,self-cleaning filter,cartridge filter for plasma,laser,sandblasting,shotblasting The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: STURM Model: 3-7x20/140 DLR P Year of production 1996 Engine power 7.5 Kw Capacity 4200 m3/h Inlet diameter - 200 mm Nledpfeif Rlujx Aa Ejk Cartridge filter cartridges - 7 pieces. Filtration area 140 m2 Complete with electrical diagram and partial piping

Condition: good (used), Mobile station welding fume extractor.dust extractor,filter ESTA SRF K-10 Fan of 1.3 Kw (230V) located on the clean side. Extraction arm with a range of 2 m. Nljdjlqw Igepfx Aa Esk Capacity 950 m3/h. Vacuum pressure of 2800 Pa. The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust pollution. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Nljdpfxjrhidme Aa Eok Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Nlodpfx Aaehqd Tve Eek Vacuum up to 4300 Pa Filtration surface 128 m2