Used Foseco Impeller for sale (269)

Condition: excellent (used), functionality: fully functional, volume flow: 163 m³/h, input frequency: 50 Hz, NB 80-160/147-127 A-F2-A-E-BAQE Non-self-priming, single-stage centrifugal spiral pump Pumped liquid: water Liquid temperature range: 0 .. 120 °C Density: 998.2 kg/m³ Technical: Speed: 2940 rpm Nominal volume flow: 163 m³/h Nominal head height: 17.1 m Actual diameter of the impeller: 147-127 mm Nominal diameter of the impeller: 160 mm Primary shaft seal: BAQE Bdedsrp Ef Ejpfx Akisi Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 100 Pump outlet: DN 80 Pressure limit: PN 16 Nominal power 11 kW Mains frequency: 50 Hz Nominal voltage: 380V 3 phases Nominal current: 20.6 weight: 162 kg ​

Condition: used, Art. No.: Pum 31 Manufacturer: KSB Type: ETANORM MX 100-200 MX 10 Item condition: very good, used Pump comes from a fire extinguishing system and has only been used for test runs. Available: immediately Bdedpfszxgwkox Akiei Flow rate: 5,000 liters/min Head: 49.6 m (water column) Revolutions: 2940 rpm Pump impeller: bronze Diesel engine Manufacturer: John Deere Type: 4045DF159 Power: 55 kW Revolutions: 2,940 rpm Year of manufacture: 2012 Operating hours: 37 Tank: 150 liters Control cabinet for automatic operation. The system can also be converted to an irrigation system with 12 bar pressure upon request.

Condition: refurbished (used), Year of construction: 2016, HANDTMANN VF-608 plus F,P.A. The machine has been completely renovated using only original parts. 3 months warranty for parts. All seals, bearings and siemering are new. Servomotors, gears and vacuum pump after complete regeneration. New control panel. Machine with a clip-socket. Accessories: grease, grease gun, impeller wrench, funnel wrench, Bedpfxspy Edlj Akijdi scraper, set of funnels and technical documentation. The machine is included with the AG-410 linking gearbox. Delivery time: ready to delivery.

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Head: 17.4–6.2 m Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.81 Bdedpfx Aoz Spiqokiji Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. CEE power plug. Chain. Storz-type discharge coupling.

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. Bdedpfx Aex Agpzskiji A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Bodpfx Aoub Utdskisdi Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min motor type 90 L engine output 2,2 kW weight 35 kg Standard suction centrifugal pump, Stainless steel housing and impeller, Flange connections, Serial No.: 22/04-140200

Condition: refurbished (used), Leybold DK100 - Used - Fully refurbished - Very good condition - 1-year warranty - End pressure 3×10⁻³ New electric motor Fan impeller cover will be installed later The following work was performed on the pump: - Complete dismantling and cleaning - Replacement of the slide valve - Replacement of all faulty parts, seals and wear parts - Replacement of the valve plates and valve tongues - Professional reassembly and test run In addition, as a company with 25 years of industry expertise, we can offer you: - Advice on choosing the right pump type for your production - Installation of the pump at your facility - Provision of a suitable replacement pump for the duration of the exchange or repair - Overhaul/repair of severely damaged pumps - Worldwide delivery Thank you very much for your interest in our listing. If you have any further questions, please feel free to contact us by email or phone. You can find our contact information on our website. Best regards, Asshorn Vakuumtechnik Bjdpfxoz I Sdfj Akisdi

Condition: excellent (used), tank capacity: 340 l, total length: 2,450 mm, total width: 1,350 mm, total height: 1,950 mm, inner diameter: 800 mm, operating temperature: 140 °C, negative pressure: -1 Pa, Vacuum reactor model BACHMIX with a total capacity of 340 liters, manufactured by BACHILLER. Bedpfx Aoxn Ngtskiedi Mounted on a stainless steel frame. Hydraulic system for lid lifting. Equipped with three agitation systems: Anchor-type agitator with PTFE scrapers + two axial turbine dual-blade impellers at different heights Cowless agitator Turrax agitator

Year of construction: 2008, condition: good (used), A complete line for the production and packaging of fruit and vegetable juices. The line consists of machines: fruit-vegetable pulp milling and production line (MEGA bunker hopper, MEGA 2012 rotary sieve, MEGA 2008 batching rung elevator, MEGA 2008 brush dripper, roller inspection conveyor- MEGA 2008, 2017 screw conveyor, pulp impeller pump, pulp tank, belt press-FLOTTWEG 2008, rinse water tank-FLOTTWEG 2008, juice cooling system- STM 2018), packaging line (triblock arrow-STM 2014, buffer tank STM 2014, bottle orientator STM 2013, capping machine STM 2013, HITACHI printer 2016, labelling machine 2018). Bodpfx Aopqxvxjkisdi We also have a second smaller bottling and packaging line for sale.

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Bodpfezf Eh Uex Akijdi Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: used, Year of construction: 2021, Grundfos Dry-Running Pump, electronically controlled TPE3 40-80 S-A-F-A-BQQE-CDB Art. 99272194 Single-stage in-line pumps with speed-controlled MGE motor PN16. 3 x 380-500 V DN100 with MGE90SC 2-56C-IA-150 motor P.C.: 2114 We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but operational. The pump was functioning perfectly up until removal a few weeks ago. Manufacturer: Grundfos Type: TPE3 40-80 S-A-F-A-BQQE-CDB Description: Single-stage in-line pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2970 rpm Rated flow: 12.3 m³/h Rated head: 5.4 m Mechanical seal: BQQE Pump casing: cast iron Impeller: cast iron Gross weight: 41 kg Bdedpjyf Hf Njfx Akiei For further technical details, please refer to the nameplate. Scope of delivery as pictured Inspection prior to purchase is possible and expressly encouraged. #Shelf 11-1-9 Shipping possible, but the buyer bears shipping costs. Worldwide shipping available.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Bodpfez A Tl Tsx Akiodi Optional Equipment 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: used, functionality: unexamined, For sale is a used, single Schuko radial fan with a directly mounted three-phase motor. According to the nameplate, the motor output is 4 kW, the rated speed is 2,900 rpm, the rated voltage is 380 V, and the frequency is 50 Hz. Bdodpfx Akez Iuiwsioi Scope of delivery: fan housing with impeller and mounted electric motor, as shown in the photos. This is not a complete exhaust system. The fan shows age-related and usage-related dirt and paint chipping. No current function test has been performed. Therefore, the functionality of the motor and fan cannot be confirmed. The fan is sold for inspection and possible repair or as a source of spare parts. The year of manufacture, exact model designation, air flow rate, and pressure are unknown. Inspection is possible by appointment at the location in Thun, Switzerland. The fan is sold in its current, untested condition without any guarantee of functionality or warranty. Collection, loading, and transport are to be organized and paid for by the buyer. In the event of export, any applicable customs clearance and import costs will be borne by the buyer.

Condition: new, Year of construction: 2026, DCV11300 TC VIBER The DCV11300 TC VIBER is a high-performance industrial dust extraction unit designed for operation under demanding conditions in the woodworking and furniture industries. Equipped with advanced filtration, safety and energy recovery systems, it guarantees reliability, cleanliness and cost efficiency in every production facility. Main Advantages of the Machine Extraction capacity of 11,300 m³/h – effective removal of chips, dust and sawdust from multiple workstations. VIBER system – automatic, trouble-free filter shaking ensuring constant operating parameters. DAMAGE PROTECT module – mechanical protection of the impeller against damage caused by solid contaminants. TC housing – effective acoustic insulation and vibration reduction. REHEAT system – recovery of heat from the extracted air for energy savings. Construction and Technology The DCV11300 TC VIBER central dust extraction unit has been designed for many years of trouble-free operation. The heart of the system is an 11 kW motor with a dynamically balanced impeller, ensuring stable and quiet operation. The construction is based on a rigid steel frame with additional inspection doors, making operation and bag replacement easier. Precision and Work Efficiency The high suction velocity of 28–32 m/s and 64 polyester filters (5 microns) ensure effective air purification even in intensively operated facilities. The BIG-BAG system or metal containers on wheels allow for efficient waste removal. Application The DCV11300 TC VIBER is an ideal woodworking dust extraction unit for facilities: producing furniture and wooden components, with multiple workstations, using panel saws, edgebanders, sanders and saws, looking for a central solution (central dust extraction system). Standard Equipment Control cabinet with easy access, Complete set of polyester filters, VIBER system with an automatic cycle, Bsdpfx Aoudalwjkisdi TC sound-absorbing housing, REHEAT and DAMAGE PROTECT modules. Technical Specifications Power supply voltage — 400 V Motor power — 11 kW Rotational speed — 3000 rpm Capacity — 11,300 m³/h Negative pressure — 3000 Pa Noise level — 80 dB Inlet / outlet diameter — 350 mm / 500 mm Filter material — Polyester, 5 microns / filter category "G" Number of filters — 64 pcs. Filter dimensions — Φ160 × 960 mm Overall dimensions — 1190 × 3160 × 2320 mm Net weight — 710 kg

Condition: used, Used Flowserve type 350LNN725 centrifugal pump. Unit is rated 1,800 m3/hr at 37.4m head, 740 rpm. Unit rated 14.9 bar maximum pressure at -30 to 25 deg.c. temperature. Casing is cast austenitic stainless steel (ASTM A744 Gr, CF-8M), shaft is stainless steel (EN 10088 X2CrNiMo17-12-2) and impeller is cast austenitic stainless steel (ASTM A744 Gr, CF-8M). Unit driven by ABB electric motor rated 315kW, 744rpm. Unit is mounted on mild steel frame. Bodpozbugtefx Akiodi

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM350 sawdust extractor with dust filters is a machine designed for intensive use in woodworking facilities. It combines a compact design, high performance, and an advanced filtration system that effectively removes chips, sawdust, and fine dust from workstations. Thanks to the use of third-stage dust filters, the extractor minimizes airborne dust, directly improving operator safety and working comfort. Main Advantages of the Machine Extraction capacity of 4560 m³/h – fast and effective removal of sawdust and chips from up to four machines simultaneously Dust filters – highly effective at trapping fine particles and reducing airborne dust in the work area Steel impeller – a balanced component ensuring vibration-free and quiet operation 3.8 kW three-phase motor – provides high power and stable suction pressure 6 bags with a total capacity of 600 l – extended operating time without the need for frequent emptying Connection to up to 4 workstations – maximum functionality for multi-stage operations Adjustable feet and a stable frame – precise leveling and safe operation on uneven surfaces Construction and Technology The CORMAK FM350 woodworking dust extractor is built on a reinforced, powder-coated steel frame. The filtration system consists of 3 dust filters and 3 waste bags, each with a capacity of 200 liters. The bags are secured using robust steel clamps, ensuring quick replacement and easy maintenance. The 300 mm diameter steel impeller provides smooth operation and ensures the durability of the machine, even under intensive working conditions. Precision and Performance The FM350 operates with an extraction capacity of 4560 m³/h, maintaining stable suction performance thanks to an impeller speed of 2950 rpm. Four suction connections (1 x 180 mm + 4 x 100 mm) allow several woodworking machines to be connected simultaneously, making the unit an ideal solution for serial production and service workshops. The dust filters effectively remove fine dust particles that are often not captured by conventional filter bags. This significantly improves air quality and reduces the risk of dust accumulation and clogging in machines. Applications The CORMAK FM350 chip extractor is recommended for use with: milling machines, Bdedpfxsz A Tv Eo Akioi planers and thickness planers, band saws and panel saws, wide-belt and drum sanders. It is suitable for both production facilities and medium-sized woodworking workshops where effective dust extraction and occupational health and safety are priorities. Standard Equipment 3 dust filters 3 waste bags with a capacity of 200 l each Connection manifold: 1 x 180 mm / 4 x 100 mm Adjustable feet Optional Equipment Ø100 mm extraction hose Galvanized clamps Technical Specifications Parameter Specification Extraction capacity [m³/h] 4560 Bag volume [l] 3 x 200 Number of bags 6 (3 filter bags + 3 waste bags) Suction connection diameters [mm] 1 x 180, 4 x 100 Dimensions (L x W x H) [mm] 2355 x 590 x 2150 Weight [kg] 125 Motor power [kW] 3.8 Power supply 3-phase, 400 V Manual (DTR) yes CE Declaration Yes

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 50 kg, total width: 400 mm, total length: 1,200 mm, total height: 1,800 mm, overall weight: 950 kg, Equipment: documentation/manual, The KKT Universal BA & KA balancing machine is a horizontally operating industrial balancing machine for precision balancing with belt drive and cardan shaft drive. It is suitable for balancing motor armatures of various sizes, as well as shafts, fan impellers, grinding wheels, cardan shafts, and similar rotors. We offer this machine in various versions, both as a used machine and as a new machine built to meet customer requirements. Please feel free to contact us - we will be happy to provide you with comprehensive advice and support. Bdedef Sqiqspfx Akisi

Year of construction: 2013, condition: ready for operation (used), Effective diameter: 1000mm, effective height: 450mm, max. load: 900kg, connected load: 7.34kW, turbine power: 5.5kW, impeller diameter: 334mm, throwing blades: 6, discharge speed: 30m/s-70m/s. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/3500mm, weight: approx. 2050kg, operating hours: 2559h. Documentation available. On-site inspection is possible. Bedpfx Akovdu N Noisdi

Year of construction: 2009, operating hours: 550 h, condition: used, Preinstalled mobil complete system inclusive impeller juice pump, high efficient boiler, heatexchanger and automatic temperature control. Components: Model on 2 fixed roller for heavy loads and 2 steering roller 41kW WOLF gas boiler Hot water circulation pump Expansion vessel Bdodpfx Aeclttpjkiei Automatic temperature control plate heat exchanger Liquefied gas version incl. gas bottle holder and gas pressure regulator Capacity 500l juice per hour Dimensions (LxWxH): 1450x980x1700mm Weight: approx. 468kg

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Bodpfx Akjiuznujisdi Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM300SA sawdust extractor with dust filters is a highly efficient and robust dust extraction system designed for woodworking and carpentry facilities. Thanks to its increased filtration area and four fabric bags, this model effectively removes both wood chips and fine dust generated during intensive machine operation. The FM300SA woodworking dust extractor is an ideal solution for many hours of continuous operation in an industrial environment. Main Advantages of the Machine Extraction capacity of 3900 m³/h – effective removal of sawdust and dust even when working with several machines simultaneously 4 fabric bags – increased capacity and longer intervals between emptying High-efficiency dust filter – separates particles as small as 2 microns Metal, dynamically balanced impeller – vibration-free and quiet operation of the system 2.2 kW three-phase motor – ensures reliable and continuous operation in industrial conditions Stable steel construction – resistant to deformation and demanding operating conditions Mobility – four-wheel mobile base with a maneuvering handle Construction and Technology The FM300SA is equipped with a multi-stage filtration system based on filter bags and dust filters, ensuring a high level of air purification. The metal WhirlWind series impeller and efficient suction duct system guarantee stable airflow without pressure drops. The Y-shaped connection manifold (1 x 150 mm / 3 x 100 mm) allows several processing machines to be connected simultaneously. Precision and Performance Thanks to optimized duct aerodynamics and a large filtration surface, the CORMAK FM300SA sawdust extractor provides effective dust removal even during continuous operation. High-quality filtration reduces the amount of contaminants in the working environment, directly contributing to operator health and improving the precision of machine operation. Applications The FM300SA is designed for professional users who work with large quantities of sawdust and wood chips. It is ideally suited for: carpentry workshops and furniture manufacturing facilities, production lines equipped with multiple machines, dust extraction from sanders, planers, saws, milling machines, and thickness planers, areas requiring fine dust filtration (dust filters included). Standard Equipment metal mobile base with 4 wheels, 4 fabric bags (filtering and waste bags), 2 high-efficiency dust filters, extraction connection manifold (1 x 150 mm, 3 x 100 mm). Optional Equipment 100 mm extraction hose, galvanized clamp. Technical Specifications Parameter Specification Extraction capacity [m³/h] 3900 Negative pressure 1750 Pa Bodpez A Txyofx Akisdi Noise level 75 dB Bag volume [l] 220 Number of bags 4 Suction connection diameters [mm] 1 x 150, 3 x 100 Dimensions (L x W x H) [mm] 1400 x 570 x 2250 Weight [kg] 64 Motor power [kW] 2.2 Power supply 400 V / 3-phase Manual (DTR) Yes CE Declaration Yes

Condition: used, mileage: 2,382,227 km, power: 330 kW (448.67 HP), first registration: 05/2009, fuel type: diesel, empty load weight: 9,900 kg, axle configuration: 2 axles, brakes: retarder, color: black, driver cabin: other, gearing type: automatic, emission class: euro4, suspension: other, number of seats: 2, Equipment: ABS, cruise control, differential lock, onboard computer, Manufacturer: Volvo - Type/Model: FM 440 4x2 - First registration: 12.05.2009 - Mileage: 2,382,227 km - Number of axles: 2 - Emission class: Euro 4 - Cab: M - Transmission: Automatic - Retarder: Yes - Brakes: Disc - Tare weight: 9,900 kg - Body builder: Pro-Wam - Tank material: Stainless steel - Total tank volume: 11,000 L - Tank compartments: 3 - Insulated - System designation: Impeller system - Impeller pump - MAK 3002 Plus - CIP cleaning Bsdpfextuiwjx Akiodi

Condition: used, mileage: 1,131,281 km, power: 257 kW (349.42 HP), first registration: 01/2005, fuel type: diesel, empty load weight: 14,600 kg, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: air, Equipment: ABS, differential lock, onboard computer, trailer coupling, , Manufacturer: MAN - Type/Model: TGA 26.350 6x2 '' Schwarte double measuring system - First registered: 20.01.2005 - Mileage: 1,131,281 km - Number of axles: 3 - Emissions class: Euro3 - Gearbox: Automatic - Suspension: Air - Lift axle - Steering axle - Brake: Disc - Length: 9300 mm - Width: 2550 mm - Height: 3150 mm - Empty weight: 14600 kg - Body manufacturer: Schwarte - Tank material: Stainless steel - Total tank volume: 14000 L - Tank chambers: 3 - System designation: Schwarte double measuring system - Impeller pumps - Data transfer - CIP cleaning - Dome pan Bodpfx Ajxtui Rekiodi

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,593 mm, total width: 2,700 mm, type of input current: three-phase, warranty duration: 24 months, power: 6 kW (8.16 HP), input voltage: 400 V, compressed air connection: 6 bar, volume flow: 15,000 m³/h, filter area: 45 m², sheet thickness steel (max.): 2 mm, High Efficiency Powder Coating Spray Booth "HELSINKI"/ Powder Recovery Booth / Powder Coating Extraction Unit Industrial powder coating spray booth with high-efficiency powder recovery system, German IE5 fan technology, automatic pulse jet filter cleaning, and variable airflow control. Designed for professional powder coating operations requiring reliable airflow performance, efficient powder recovery, low maintenance, and robust industrial construction. Technical Data Bdodpsy N Ubzefx Akioi Power: 6 kW Electrical supply: 3-phase, 380–400 V, 50 Hz Compressed air requirement: 5–6 bar clean compressed air supply Airflow capacity: up to 15,000 m³/h (variable flow control) Fan: German-made high-efficiency IE5 fan with aluminium impeller Filter system: 3 x antistatic polyester cartridge filters Filter media: 260 g/m² polyester with Teflon + aluminium coating Construction: 2 mm steel, powder coated Mobility: industrial lockable wheels Compressed air connection ports: yes Automatic filter cleaning: yes (pulse jet) Additional outlet safety filtration: yes Accessories holder / hose rack: yes Key Features High-efficiency powder recovery Automatic pulse jet cartridge cleaning Special multiport cleaning nozzles for improved filter cleaning performance Antistatic filter media prevents powder particle embedding Reduces static charge accumulation Easier cleaning and longer filter service life Variable airflow control for different production requirements Energy-efficient German IE5 fan technology Additional outlet filtration for safer operation Compressed air ports for cleaning gun and accessories Heavy-duty industrial construction Mobile design for flexible workshop layout Dimensions Width: 2700 mm Depth: 1608 mm Height: 2593 mm Suitable for Powder coating workshops Metal fabrication Steel structures Aluminium parts coating Industrial finishing lines Custom coating production Manufacturer: Brigas Industries OY Location: Finland Condition: New DISTRIBUTORS WANTED

Condition: new, Year of construction: 2026, DCV8900TC VIBER Industrial Dust Collector – Advanced Extraction System with Automatic Filter Cleaning The DCV8900TC VIBER is a modern industrial dust extraction system designed for intensive operation in professional woodworking plants and industrial production facilities. Combining advanced technology with maximum efficiency, it ensures stable extraction performance while reducing noise and vibration levels. The integrated VIBER automatic filter cleaning system minimizes maintenance requirements and maximizes operational reliability. Key advantages VIBER system – automatic filter shaking and cleaning without interrupting operation. TC acoustic enclosure – effective noise insulation and vibration reduction. DAMAGE PROTECT system – mechanical protection against the intake of hard foreign objects. REHEAT heat recovery system – recovers heat from exhausted air, improving energy efficiency. High airflow capacity of 8,900 m³/h – designed for large industrial facilities. High airtightness construction – cleaner air and reduced heat loss inside the production hall. Construction and technology The extraction unit is equipped with a reinforced metal impeller that is dynamically balanced to ensure stable, quiet, and reliable operation. The fan blade geometry has been optimized for maximum suction efficiency and reduced energy consumption. The integrated REHEAT system enables recovery of thermal energy from discharged air, significantly lowering operating costs and improving the overall efficiency of the ventilation system. Precision and performance The DCV8900TC VIBER maintains a constant suction velocity of 28–32 m/s, even when operating with multiple machines simultaneously. Polyester filters with a filtration accuracy of up to 5 microns, with the option of installing HEPA filters, ensure excellent air quality in demanding industrial environments. The automatic filter cleaning system maintains consistent airflow performance and reduces downtime associated with manual maintenance. Applications The DCV8900TC VIBER is designed for large-scale woodworking, furniture manufacturing, and industrial production facilities. It is ideal for extraction from machines such as: edge banding machines sanding machines panel saws Bjdpfxjudaaze Akisdi format saws CNC woodworking equipment The unit works perfectly as a central dust extraction system for multiple production stations operating simultaneously. Standard equipment Automatic VIBER filter cleaning system TC acoustic insulated enclosure REHEAT heat recovery system DAMAGE PROTECT protection system Control cabinet Metal waste containers (500 L) Polyester filter cartridges Technical specifications Parameter Value Motor power 7.5 kW / 400 V, 50 Hz Motor speed 3,000 rpm Extraction capacity 8,900 m³/h Maximum vacuum pressure 3,000 Pa Noise level 80 dB Suction inlet diameter 300 mm Air velocity 28–32 m/s Filter surface area 20 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 45 Dimensions (L × W × H) 2400 × 1170 × 2240 mm Weight 500 kg