Used Forging Machinery for sale (84,486)

Condition: good (used), grinding width: 600 mm, The machine is in good condition. The magnetic plate is 800/500 mm and 1300x700 mm. Price per unit. Ijdpfx Aaot Ay Nhecebc

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, The hose bag packaging machine shown in the picture is for sale. Ibedpfxsu S Hfms Aacsc It can pack liquids, sauces, or dry goods. It also has a vacuum function, and gas flush function. Carrying handle design. With a vacuum pump and a conveyor belt. Ceqfu792Uk The diameter of the tube is about 23 cm, the length of the package can be adjusted in the program. We used it to make 1-2 kg packages, but it is good from 0.5 kg to 4 kg. The machine is about 5 years old but we used it for 1 month. Quality Chinese made. Top Y Machinery TOPY-VP520 VFFS Packing Machine Can be viewed and tried in Székesfehérvár. The price shown is without tax.

Year of construction: 2020, operating hours: 245 h, condition: good (used), functionality: fully functional, machine/vehicle number: QX20200111A551, Used - Pre insulated pipe decoiler. The decoiler could be used for other pipe types. Pipe coiler parameters: Installed power: 5.5 KW Voltage: 220V Current frequency: 50 Hz Compressed air: 6 Bar Total weight: 1700 kg Coil dimensions: Coil ID: 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400mm Coil OD: up to 3100mm Coil width: up to 1100mm Ibjdpfjt Eatxox Aacoc Please call for more information

Condition: like new (used), Year of construction: 2021, operating hours: 8 h, functionality: fully functional, type of input current: three-phase, 2011 Rigao Machinery Corp Plastic/PE/Laminated Tube Labeller and Tube Filler & Sealer with Cooler This machine is in "as new " condition only running a few thousand tubes for commissioning. It was purchased for a specific purpose, which did not materialise. The system can be run separately (labeller and Filler/Sealer) or as one continuous line. Comes with original tool kit, spares and the option of a 12 month warranty through a UK Based Rigao Specialist. This same company could potentially commision the machine if required (price on application). Plastic/PE/Laminated Tube Filler and Sealer with Cooler ○ The machine is used to fill and seal plastic tube, capable of tube loading, tube code registering, filling, hot air sealing, code printing, trimming and feeding off line a finished tube. ○ Machine contacting parts are made of 316L stainless steel which is clean and sanitary. ○ With a built in safety device, the machine will be shut down if the door is open. There is also an overload protection provided. Parameter Filling volume 5-250ml（by changing different filling system） Filling accuracy ≤±1% Capacity 1800-2400pcs/hour (Depend on tube size and product viscosity） Tube diameter ф13-50mm (by changing tube tooling – 35, 40 & 50mm tooling available). Tube length 210mm (Max. Length) Hopper volume 40 L Power 380V /50Hz 3Phase Air pressure 0.5-0.7MPa Equipped motor 1.1 Kw Plastic/PE/Laminated Tube Labeller with Auto Feeder Tube size： Φ20-50mm，Length: 20-240mm Mandrel sizes: Φ35mm, Φ50mm Ibedjt Ami Ujpfx Aacsc Labelling speed： 60-100 tubes/minute（vary with tube and label size） Labelling accuracy： ±0.5mm（excluding tube or label difference） Label size： ID: Φ75mm; OD: Φ300mm; Width: 170mm Compressed air： 0.4-0.7Mpa，3L/min. Power supply： 220VAC±5% 50/60Hz 1.2Kw Machine dimension： (L)2,252×(W)1,350×(H)1,875 Configuration list: S6120 servo label out Japan Yaskawa Label detecting eye Japan Keyence Tube detecting eye Japan Keyence Label roller motor transmission Japan Panasonic Stuck tube clearing device Japan Panasonic High precision CAM divider Taiwan RU80DF Pressure roller wheel device Japan Panasonic PLC control system Germany Siemens Touch screen Taiwan Weinview

Condition: used, Year of construction: 2016, gebraucht 2016 9737 prompt, Zwischenverkauf v 9800 € 1 8330 € 2025 mm 3 mm 500 mm 4 kW 2500 mm 1720 mm 1200 mm 1100 kg Manual back gauge 500 mm Foot pedal Side stop Ibedpfx Aowiq Iwjacjc 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The induction sealer is used for sealing PET and PP bottles with an aluminum protective lid. It is particularly recommended for the chemical, pharmaceutical, and cosmetics industries, as well as wherever it is necessary to secure volatile or corrosive substances from uncontrolled leakage. Main features: • Suitable for use with plastic or glass containers. • Very easy to operate • Handheld device for small production runs • Portable and does not require a dedicated workspace • Packaging speed: approx. 20-40 pcs/min (depending on the operator and product being sealed) • Maximum container diameter: 60-130 mm • Maximum distance between the inductor and container: 3 mm • Activated by a switch located on top of the inductor Control panel: • On/Off switch • Fuse • Digital display indicating current • Digital display indicating time Ibedpfxjxlm She Aacoc • Overheat protection – the device automatically shuts down until it cools down

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. Ibsdpfx Aoiv R Hhjacoc This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: like new (used), Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed. Iodpfx Asdz Tcbjacsbc

Condition: new, functionality: fully functional, Year of construction: 2023, 2 BBL brewing system - complete 2 wessel microbrewery Ibsdpfx Aswf N Nljacsc 2 vessel microbrewery complete, 300 l

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 210 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: Syntec, total height: 2,100 mm, total length: 4,300 mm, total width: 2,100 mm, table load: 2,500 kg, spindle motor power: 12,000 W, number of spindles: 16, Made in The Netherlands | CE certified | Handling; Dutch, English, Turkish, Italian, Polish, and more Iedpfjtph I Nex Aacobc Manufacturer: D.M.A. Machinery Model: Express-Line type Nesting Dimensions: 1,600 x 3,200 mm Z-axis: 210mm Machine type: CNC Nesting Machine Year of construction: 2024 Features: - Tool-changing station with 12 positions (optional rotary carousel with up to 18 positions) - Nesting CADCAM software: Pegasus for milling & paneling - Optional double groove saw (X-Y axis) - 9.5 kW ATC spindle - 12 kW ATC Hiteco spindle HSK (optional) - 12.5 kW HITECO HSK spindle - Tool holders: ISO30 | HSK63F (ER32/ER40) - Optional: HSK63F (SCM Hiteco) - Speed: 1,000 - 24,000 RPM - Vacuum pump: 5.5 kW – 250 m³/h - Automatic lubrication system: Standard (grease) - CADCAM software post-processor included - Supported file formats: DXF, JPG, PNG, EPS, PLT, and more - Simulation and nesting optimization software

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! Ibodpfx Aaspu A D Aocjc The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Isdpowl Iw Uefx Aacjbc

Condition: new, Year of construction: 2025, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Ibsdpfx Aaof Hkgpecjc Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: KB-20211022002, 1 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tank, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Serial number - KB-20211022002 Date of manufacture - 2021. Iedpfx Ajwl H Nieacebc Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Year of construction: 2024, condition: like new (used), functionality: fully functional, For sale is a washing and sorting line for pumpkins from the manufacturer Burg Machinery with a capacity of 3-4 tons/hour. Includes dipping tank, polishing unit, roller dryer, and sorting. Ibjdpjw Trldofx Aacec

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, Model: Express-Router type CNC Nesting Gantry construction, high precision via gantry drive, accurate, requires low maintenance. The gantry's linear guides, driven on both sides, meet the highest standards for precision and dynamics. Rack and pinion drives on the X and Y axes ensure high-precision movement. Fast acceleration/deceleration, rapid tool changes. Dimensions: 2,100 x 3,200 mm (Other sizes: 1,300 x 2,600 – 2,100 x 3,200 – 2,100 x 6,100 etc.) Z Axis: 210 mm (higher options available) Machine type: CNC Nesting Machine Year of manufacture: 2025 NEW – Dutch Assembled – Features: - Tool changer station with 12 positions (optional rotary carousel with up to 18 positions) - Nesting CAD/CAM software: Pegasus milling & panel processing - Dual groove cutter (X-Y axis) optional - 9 kW ATC spindle ISO30 - 12 kW ATC Hiteco spindle HSK-63F optional - Tool holders: ISO30 | HSK63F (ER32/ER40) - Speed: 1,000–24,000 RPM - Vacuum pump: Becker 5.5 kW – 250 m³/h - Automatic lubrication system as standard (grease) - CAD/CAM software post-processor included - DXF, JPG, PNG, EPS, PLT, and more - Simulation Iedpswl H Ilofx Aacebc - Nesting optimization software Pegasus

Condition: used, Year of construction: 2009, DY Slotter Model FPS Gold 1227 Year of manufacture: 2009 3-color printing unit (1 defective) Double slotter unit Rotary die cutter Stacker Automatic jogger Automatic prefeeder (defective) Dimensions: Min. 300x500 mm / Max. 1450x2800 mm Iodpsw Rbbvofx Aacobc

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Isdpjq E Ti Hofx Aacobc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, screw diameter: 90 mm, overall weight: 11,000 kg, total width: 3,200 mm, total length: 5,200 mm, total height: 2,200 mm, HDPE, PE extrusion blow molding machine (canisters, bottles). 4 units for sale. Compressors, chiller, and grinders are included with the machines. Iodpsxhg N Eefx Aacobc

Condition: good (used), Brand: HM Model: WKS 1000/4.0 Cutting length: 1000 mm Cutting capacity (steel): 4 mm Cutting capacity (stainless steel): 2 mm Back gauge: 750 mm CNC controlled Hold-downs: 1 piece Ibjdpsw Hydvofx Aacec Table height: 780 mm

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15151, Working width: 330 mm Min./max. veneer thickness: 0,4-0,8 mm Voltage: 400/3/50 - 480/3/60 - finger form VARIO 3 - rewinder for roll with encoder - Winder Start-Stop by fotolights - electronic controlled by EATON PLC and touch panel - encoder for tape infeed - FESTO valve block with plc connection - automatic start with sensor Ijdpfx Aajxclc Tecebc - - transport speed up to 130m/min adjustable through inverter - new white/grey colour RDS 240 80 05 - Labeling, marks and panel language in English, manual in English - electric and pneumatic in english - perfect working requires flat veneers with parallel cut edges Technical Data with winder: min. veneer width: 80 mm max. veneeer width: 330 mm min. veneer length: 340 mm veneer thickness: 0,4 - 0,8 mm transport speed: 60 - 130 m/min winding core: Ø 200 mm max. winding: Ø 700 mm compressed air: 7 - 9 bar air consumption: 60 - 100 NL/min power: 480(400)V 3Ph 60/50 connected load: 4 kW

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm Ibsdpfx Aotutwvsacjc -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: new, Year of construction: 2025, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (max.): 10,000 rpm, total width: 7,170 mm, total height: 4,620 mm, total length: 4,390 mm, table length: 2,500 mm, table width: 1,600 mm, table load: 10,000 kg, tank capacity: 24 l, tool length: 200 mm, tool diameter: 300 mm, THE MACHINE IS FULLY PREPARED FOR SHIPMENT FROM THE SUPPLIER'S WAREHOUSE IN CHINA. DELIVERY TO EUROPE: 1–2 MONTHS. PRICE INCLUDES INSTALLATION AND FULL WARRANTY. The GMF 2519T gantry machining centre is ideal for heavy-duty roughing (removal of large material volumes) as well as finish machining (final, high-precision processing) of large workpieces. In addition to these operations, the machine can perform: milling, drilling, boring, countersinking, reaming, rigid tapping, and other operations. Key Advantages - High-precision and productive machining of simple and complex parts. - Stable machining process with excellent repeatability. - Remote diagnostics and data management. - Wide range of configurations and accessories. STANDARD EQUIPMENT OF HT5L MACHINE - Fanuc Oi-MF CNC control system - CNC package for high-speed mould machining - Spindle BBT50 – 10,000 rpm - Tool magazine with 24 positions - Air-conditioned electrical cabinet - Spindle oil cooling system - Standard work area guarding with open top - Swivelling operator panel for machine and CNC system - Chip conveyor with integrated tank - Automatic lubrication system - Three-colour signal tower - Air blow gun - Coolant gun - Standard service tool set - Oil separator - Renishaw TS27R probe - Operation manual – mechanical part - Operation manual – electrical part - CNC system operation guides - BT50 taper test arbor for machine geometry check - CE-compliant design Isdpexbd Ifsfx Aacobc

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 39035, National Machinery 750 S3 Operational - Working Iedpfx Aajtnhp Rscebc 5 FORGING STATION Supplied with control process and soundproof cabin Machine Size: 750 S3 Number of dies and punches: 5 Total heading load (kN): 2730 Number of strokes/min. (min/max): 90 Cutoff diameter: 22 mm. Cutoff length (min/max): 4,75/80 mm. Kickout stroke - die (min/max): 19/100 mm. Kickout stroke - punch: 52,4 mm. Motor size (kW): 55 Net weight (kg): 41.500

Year of construction: 2009, condition: ready for operation (used), A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025. Isdpfx Aju S I D Roacsbc