Used Foil Stamping Machine for sale (63,984)

Condition: used, Year of construction: 2017, Foil wrapping machine Sitma WM 60 Year: 2017 Csdpfxjwhi Iyj Afnjgn The new automatic intermittent motion side seal machine is equipped with infeed conveyor, shrink tunnel and delivery conveyor Description: - Semi automatic setting - Colour monitor with touchscreen - Straight infeed - Foil unit - Shrink tunnel Specifications: Sitma WM 60 - Packaging possibilities Min./Max. Length: 100 • 420 mm. Min./Max. Width: 75 -420 mm. Min./Max Height: 1-200 mm. Min./Max width of micro-perforated single fold film: 155 • 655 mm. Max. mechanical speed: up to 3,600 cycles per hour

Condition: used, Foil wrapping machine Clamco DEM Description: Cjdpfxstlfhyo Afnogn - L-sealer - Foil unit - Shrink tunnel Power supply : 220 Volt, 3 phases

Year of construction: 2000, condition: used, Foil wrapping machine OMG Autofard Year: 2000 Description: - Straight infeed Cgjdpeku H Aijfx Afnen - Foil unit - Shrink tunnel Maximum speed 15 piles/products a minute

Condition: used, Year of construction: 2007, Foil wrapping machine Hugo Beck CWS 500 Cjdpfx Aeulixqofnegn Year: 2007 Description: - L-sealer Shrink tunnel

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Cgsdpfx Aex Hqmhjfnon Includes additional components, fillers, and letterpress locks.

Condition: used, sheet width 750 mm plate length 1250 mm plate thickness 4 mm table surface area 1600 x 1050 mm no. of strokes 180 Hub/min max. punching diameter 105 mm punching pressure 25 t total power requirement 4,0 kW Csdpjxfb Hmjfx Afnegn weight of the machine ca. 1,8 t dimensions 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools

Condition: like new (used), Airpad Fromm AP502 Perfect condition, ready to work. Compact and easy to use, the Airpad AP502 produces protective padding material. No operator needed – just one button press. Pre-programmed programs for the production of airbags of various sizes. Changing the program by pressing a button. Cgedpfx Aowyak Ajfnon Weight: 228 kg Year of production 2018.

Condition: good (used), Minipack Torre Mailbag Packer The device is functional and ready for production, in very good condition. Cgsdpfx Afswxtbronsn The photos show the product being sold. Produced in Italy. Manufacturer’s description: Mailbag is a digital compact system for packaging in plastic bags, ideal for packaging brochures, newspapers, books. Single-phase power supply (airless) is easy to use with mounted wheels, the system can be easily moved from one place to another with minimal fuss. A product, e.g. a magazine inserted into the feeder, initiates a photocell, detects the package and moves the film and product to the closing system. The combination of transverse and longitudinal seals closes the package and also creates a seal for the next product. The finished package gently falls into the receiving basket at the bottom of the machine. Technical data: Production speeds, depending on package and film dimensions (up to 1200 pph) Min. package width 160 mm Max. package width 250 mm Min. package length 100 mm Max. package length 360 mm Max. film thickness 30 microns Machine dimensions 600 mm x 840 mm x 1050 mm Weight 144 kg Power supply 230V Power consumption 0.6 kW

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: Cjdpfewxtb Eox Afnjgn die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Banding machine TP-601 D1 The machine is operational, ready for production. Producer: M.J Maillis Sander Simple controls. An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Cjdpfxjw D E Rij Afnegn Adjustable tension force. Goal size 850x600mm Strap width 10mm Power supply 230V Weight 200kg

Year of construction: 1993, condition: used, machine/vehicle number: 24323, For corner joints transom and mullion for optional glue or nail holes Water drainage slots in frame and transom profiles recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Cjdpfx Afsbnnwqenjgn Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Weight: approx. 106 kg

Condition: used, machine/vehicle number: 4 06A1 0214/26236, For corner joints transom and mullion for optional glue or nail holes Water drainage slots in frame and transom profiles recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Weight: 108 kg Csdjbnnwfjpfx Afnogn

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Cgedeh T Ulyepfx Afnon Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Cjdpfx Aodzqltefnjgn Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Year of construction: 1993, sheet width 1550 mm plate length 2525 mm plate thickness 6,4 mm Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih Cjdjvh Ndpopfx Afnsgn no. of strokes 200 / 400 Hub/min control MNC 32000 ATC 22 Pos total power requirement 7,5 kW

Condition: ready for operation (used), Year of construction: 1994, A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible. Cedpfjwtg Hwjx Afnegn

Condition: ready for operation (used), Year of construction: 2000, Materials: paper/cardboard/solid board/corrugated board, min. paper weight: 80g/m², max. cardboard and solid board weight: 2000g/m², max. corrugated board thickness: 4mm, stack height at feeder/outfeed: 1700mm/1800mm. Punching force: 400t, min. sheet size: 350mm/400mm, max. sheet size: 820mm/1130mm, machine speed: 9000 sheets/h. Documentation available. On-site inspection is possible. Expected to be available from August 2025. Cedpev D I Dyofx Afnjgn

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Cedpfxouyk S Ao Afnsgn

Year of construction: 1999, condition: ready for operation (used), Built in: 1999 Size: max 500 x 500 mm min 200 x 120 mm Packet height: max 500 mm min 50 mm Width of film: max 600 mm Diameter of film reel: max 300 mm Film thickness: 12 - 100 mµ Speed: max 1560 c/h Power requirements: 4,5 kW (220/380V, 50Hz) Width: 1000 mm Depth: 1230 mm Height: 2065 mm Weight: 500 kg (approx.) Cgsdpfx Aod N D Ncjfnsn Equipment: • shrink tunnel 6217 • transport belt 6214 and shuttle worth 6264

Condition: good (used), Built in 1996 Cgodod Tnh Iopfx Afnjn

Condition: ready for operation (used), Rebuilt 2016 Cjdpfodykhpjx Afnjgn Size (mm):: 200 x 420

Year of construction: 2004, condition: ready for operation (used), Built in: 2004 Format range width: 200-420 mm Length: 200-420 mm Height: 30-400 mm Speed: bundles/min 25 Pakete/min Width of film: max 550 mm Film thickness: 12-80 mµ Cgedpfx Afjd N S Adsnon Diameter of film reel: max 350 mm

Year of construction: 2004, condition: good (used), coil, coil edge guide brake load cells 12 holographic spool unwinders hot stamping unit cooling suction hood with collection bag boiler refrigerator electrical panel Cgsdsmmc Uiopfx Afnon operator panel

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP Cgedsfwfpbopfx Afnon This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. Codpfx Afewabbvsnegn The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).