Used Foam for sale (446)

Condition: used, functionality: fully functional, mileage: 17,500 km, power: 219.91 kW (298.99 HP), fuel type: diesel, color: red, axle configuration: 2 axles, empty load weight: 9,230 kg, next inspection (TÜV): 12/2025, fuel: diesel, gearing type: automatic, Year of construction: 2007, Equipment: additional headlights, all wheel drive, differential lock, parking heater, HLF 20 Manufacturer: Magirus Design: HLF body according to DIN 14530 Roof equipment: Ladder removal aid for 3-section extension ladder Storage compartment on the roof Lighting Light mast in the rear of the vehicle (operated via external power generator) Ambient lighting Equipment compartment lighting Pump compartment lighting Cabin lighting Additional headlights Equipment compartments Sides: 3 roller shutters per side Rear: 1 roller shutter Equipment compartment 1: Pivoting wall & bracket for hydraulic unit Equipment compartment 2: Bracket for power generator & connection for light mast Rear area: Mounting device for two single-person hose reels Firefighting equipment Water tank: 2,000 liters Foam tank: 120 liters Pump: FPN 10/2000 (installed) Foam proportioning: FireDos foam proportioning system Dimensions & Weight Dimensions (L × W × H): 7,900 × 2,500 × 3,300 mm Empty weight: 9,230 kg Max. Gross vehicle weight: 14,500 kg Respiratory protection 2 in the crew compartment 4 in the body Chassis Manufacturer: Iveco Type: FF140E30 Year of manufacture: 2007 Power: 220 kW / 5,880 cm³ (approx. 299 hp) Drive: 6-cylinder diesel engine, automatic transmission Mileage: 17,500 km Axles: 2 Tires: Michelin 395/85 R 20 168G (DOT 2916) Cabin Doors: 4 Seats: 9 (1/8) Lodpfx Aewvqg Hoalehn Upholstery: Fabric/leatherette, multi-colored Color: Red Windows: Electric Inspections Next MOT: 12/2025 Next SP: 12/2026 Further equipment available upon request. We are happy to answer any further questions you may have. We look forward to your visit to Berlin. *All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy.

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Lodpexqmb Tofx Aalshn Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, loading space length: 3,540 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, loading space volume: 12 m³, emission class: euro6, color: grey, number of seats: 7, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Welcome to carmax24 Today you have the opportunity to purchase one of our carefully selected, inspected vehicles. Independently appraised and high-quality vehicles have been ensuring high customer satisfaction since 2008. This is our daily mission, as you, the customer, are always our top priority at carmax24. RENTAL PURCHASE * LEASING * FINANCING AT TOP CONDITIONS NEW MODEL: Iveco Daily 35S18HA8 V – 7 seats Wheelbase: 3,520 mm, single rear wheels Color: Grey IC 370 EURO 6 Engine: 3.0 litre diesel Maximum output 176 HP (129 kW), maximum torque 400 Nm at 1,500 rpm, 4 in-line cylinders, Lhodoxlmt Sjpfx Aalsn Turbocharger with variable geometry eVGT Transmission: AUTOMATIC HI-MATIC 00676 Rear-view camera with guiding lines 00726 Spare wheel in a retractable basket under the rear overhang of the vehicle 01565 Fuel tank 85 l 02210 Spare wheel 05925 Additional adjustable fixed speed limiter 06520 12V 13-pin DIN electric trailer connections 06767 Twin rear doors, opening to 270 degrees 07820 Trailer ball coupling 08623 Rear parabolic spring—reinforced with minor deflection for S models 08650 Third brake light, illumination 79336 Decorative dummy Daily grille with chrome strip 01553 Gunmetal badges 02443 Leather steering wheel 02308 Daily aluminium wheels 72625 Full LED headlights COMFORT PLUS PACKAGE 00259 Comfort suspension seat (3-position adjustment, lumbar support, armrest) 01611 USB A+C ports on driver’s and passenger’s side 75082 2-seater passenger bench with folding table, 3-point seatbelts 07196 170 cm³ air-conditioning compressor 01605 NAVI MY IVECO infotainment system with 10-inch display 06555 Fog lights 14522 Adaptive Cruise Control (ACC) with radar sensor 06650 Cabin ventilation and heating with automatic climate control 79297 Fully padded headrests with memory foam and Daily logo Stock vehicle – available immediately Welcome to carmax24! Today you have the opportunity to purchase one of our carefully selected, inspected vehicles. Independently appraised and high-quality vehicles have been ensuring high customer satisfaction since 2008. This is our daily mission, as you, the customer, are always our top priority at carmax24.

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) Ledpfsif Ek Rsx Aalshn The machine is CE certified.

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Lhsdpfexl Dbtjx Aaljn Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: new, Year of construction: 2024, power: 3.8 kW (5.17 HP), axle configuration: 4x2, load capacity: 230 kg, mast type: telescope, lifting height: 18,000 mm, lifting power: 230 kg/m, platform length: 1,450 mm, platform width: 760 mm, overall weight: 7,420 kg, empty load weight: 7,420 kg, construction height: 2,000 mm, fuel type: electric, tire size: 17,5×6,75 (schuimgevuld non-marking), tire condition: 100 %, wheelbase: 2,000 mm, ground clearance: 200 mm, color: red, Equipment: CE marking, === KEY SPECIFICATIONS === Year: 2024 Operating hours: 3 h (new / unused) Working height: 18.00 m Max. horizontal outreach: 9.00 m Platform capacity: 230 kg Platform dimensions (L x W): 1,450 x 760 mm Upper structure rotation: 355° Platform rotation: Yes (180°) Boom type: Articulated Jib: Yes (articulating jib ±70°) Drive type: Electric (48V lead-acid battery) Drive: 4x2 (2-wheel steer) Tyres: Solid non-marking (17.5×6.75, foam filled) Stabilisers: No Motor: Electric drive – 3.3 kW traction / 3.8 kW lift motor Emission class: n/a (zero-emission electric) Weight: 7,420 kg CE certification: Yes === HIGHLIGHTS === New zero-emission electric articulated boom lift with 18 m working height Compact design with excellent outreach and 355° rotation Fully electric drive with durable lead-acid battery system Proportional controls, automatic braking and load-sensing platform Suitable for both indoor and outdoor operation with non-marking tyres === CONDITION === New machine – fully tested and ready for immediate use. Inspection available on request. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excluding VAT). Ledpexct Ikofx Aalohn === DESCRIPTION === The Magni EAB18AC is a fully electric articulated boom lift with a working height of 18 metres and a platform capacity of 230 kg. Its compact size, smooth proportional controls and zero-emission operation make it ideal for indoor use and low-emission areas. The robust construction and integrated safety systems, including emergency lowering and overload protection, ensure maximum reliability and safety at height. === DELIVERY === Crane loading available on request for smooth handling at dispatch. Flexible delivery options tailored to your destination and logistics requirements. Transport professionally organised by the internal logistics team.

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available stock of new vehicles, we offer you: TLF 4000 / TLF 5000 All-wheel drive on a MAN TGS 18.510 all-wheel-drive chassis, off-road capable Introducing our MAN 'Mountain Lion'! With its 510 HP and all-terrain single-tire all-wheel-drive chassis, it excels in demanding off-road conditions. Perfectly suited for steep inclines, adverse weather, and remote areas far from any road. Lhedpfsxl Ab Sjx Aalon Chassis: • MAN TGS 18.510 4x4 EURO 6 with 510 HP (375 kW) • Automatic transmission • All-terrain single tires for maximum off-road capability Cab: • Standard crew cab (1:5), painted RAL 3000 (fire red) • Air conditioning and auxiliary heater • 4 PA brackets in the crew compartment as standard Superstructure: • High-quality frame construction made from rust- and corrosion-free materials • 4 flexible and spacious equipment compartments per vehicle side • Swing walls for maximum storage space • Fold-out steps for each side equipment compartment • Custom stainless steel equipment mounts to your requirements • Walkable, non-slip roof Firefighting pump/Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump FPN 3000-10 • PUMP&ROLL capability • Output: over 3,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely adjustable foam proportioning system • Water tank: 5,000 l with integrated foam agent tank: 500 l • Auxiliary heater in the pump compartment Firefighting Equipment: • High-pressure rapid intervention hose reel with 50 m stable hose • Remote-controlled foam/water monitor on roof • Remote-controlled front monitor • Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: • LED lightbar on roof / 2 LED front flashers • Additional blue lighting elements on superstructure • Pneumatic special signal system (Martin horn) • 100 W speaker system with announcement unit • Rear view camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting and additional spotlights on superstructure • Pneumatic LED light mast with remote control • Hygiene board available upon request We would be pleased to provide you with a detailed quotation and present the vehicle in detail at our location in Berlin.

Condition: excellent (used), 1 X Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Heigh - 30 – 300mm Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts. Lhsdpfjw E Ey Tsx Aalen

Year of construction: 2024, condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Working gloves special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Viewing panels Lodpeh Hxubjfx Aaljhn

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) Lodpfx Asfnlkwealjhn The machine is CE certified.

Condition: excellent (used), For sale: professional MAGNAFLUX UVM3059 UV-A radiation intensity meter – used for NDT inspections (non-destructive testing, penetrant testing, fluorescent inspection, etc.). The device is in very good technical and visual condition, ready for immediate use. • Model: UVM3059 • Manufacturer: MAGNAFLUX GmbH • Power supply: 9 V • Measurement range: 0.5 – 99.9 W/m² • Serial number: 381 • Calibration date: 14/08/2023 • Next inspection due: 2024 • Set includes: original transport case, foam protection, sensor, documentation on the housing The device is fully functional, the display works correctly, and the sensor responds properly to UV-A radiation. Ready for use in laboratory, workshop, production, or quality control. Ledpfxoxlub Do Aalehn

Condition: used, mileage: 104,000 km, power: 375 kW (509.86 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, overall weight: 18,000 kg, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Demonstration vehicles 3 units available Main components FH Globetrotter safety driver's cab Wheelbase: 3,800 mm Chassis height: MED (medium) Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm Rear axle RSS1352A, single gear, 13 t axle load, GZG 52 t I-Shift AT2612, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Drive axle ratio 2.47:1 Reinforced engine brake Volvo Engine Brake+ (VEB+) Aluminum rims Dura-Bright EVO (polished) Paint: 1103WHIT winter white FH rest package, one bed Info and media package with Navigation Driver comfort package Side collision avoidance and turning assistant (both sides) Close-up camera on passenger side I-ParkCool (integrated auxiliary air conditioning with automatic temperature control) PTO PTR-DH (fast), gearbox side, connection: 1 DIN rear for pump Interior of driver's cab, living area Comfort driver's seat, air-suspended, heated, seat belt Two armrests on driver's seat Armrests covered in leather Standard passenger seat, fixed Foam comfort mattress for lower bed, hard, foldable, with safety net Basic mattress topper (20 mm) Storage space under bed Storage compartments above bed, capacity: 245 l Switch console (basic) on bed (interior light, auxiliary heating, roof hatch and door lock) Cool box 33 l, with freezer compartment, under bed Compartment under dashboard with drawer Bottle holder at front and rear Make-up/shaving mirror Ledetxfw Repfx Aaljhn Two flexible reading lamps Interior lighting with dimmer and red night lighting Side sun visor, driver's side Interior sun visor, manual roller blind Roof window and emergency exit, can be opened manually (tinted glass) Curtains on windscreen and windows 2 rubber floor mats Central locking with remote control Auxiliary heating in driver's cab, 2 kW Automatic climate control with sun sensor Interior of driver's cab, driving Load/axle load display in vehicle display Battery display in display Steering wheel, leather version Steering wheel adjustment in height and inclination, with additional steering shaft adjustment Roof antenna and preparation for CB radio Digital tachograph, generation 4 Eco-Cruise-Control (cruise control) including braking cruise control Lane keeping assistant Battery pulse device Adaptive cruise control (ACC) with collision warning and emergency braking function Immobilizer, transponder in Key Gearbox/I-Shift operation via control unit on the driver's seat I-See with map-based topography information (high resolution) Stationary trailer brake active up to max. 7 km/h Electronic stability program (ESP), base with normal load center of gravity Chassis Rear axle load (technical) max. 13 t Front axle load (technical) max. 7.5 t Parabolic suspension at the front, 2-leaf (normal hardness) Air suspension at the rear, 4 air bellows Three driving heights for air suspension 650 liter aluminum tank on the left 112 liter AdBlue tank on the right Single battery system: one battery block (2 single batteries) for the entire vehicle electrics Two work lights at the rear/top of the driver's cab, white LED Trailer detection with LED sensor Frame end beveled Frame thickness 6.5 mm Frame profile height 266 mm Frame length at the rear 825 mm Extra Spring brakes on front axle Disc brakes, solid discs on steering axle Brake discs on drive axle, solid, 410 mm diameter Air compressor 2-cyl., 1,100 l/min Holding bracket (steel) for trailer connections behind cab Fifth wheel coupling SAF-Holland/GF, SK-S 36.20, cast 1 wheel chock, foldable, position at the front

Condition: new, power: 235.36 kW (320.00 HP), overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, gearing type: automatic, Year of construction: 2024, water tank capacity: 5,000 l, Equipment: additional headlights, air conditioning, all wheel drive, cruise control, differential lock, parking heater, power assisted steering, trailer coupling, New tank fire engine AVAILABLE IMMEDIATELY TLF5000 MAN 18.320 4x4, differential lock Off-road tires Crew squad Original MAN double cab Air conditioning Lhedpfxjvva Axs Aalen Auxiliary heating Pump room auxiliary heating Structure 5000 liter water tank 500 liter foam tank Self-protection system PumpAndRoll 3 equipment compartments each (left and right) 1 pump room (rear) Spacious storage space Secure attachment of the load Made from rust-proof material Frame construction Made from rust-proof and corrosion-free material Stainless steel brackets Special signal system LED blue light system All light units are protected against mechanical damage. LED lighting: - Ambient lighting - Equipment room lighting - Pump room lighting - Cabin lighting - Roof lighting - Additional headlights - Rear warning system - Light mast Other equipment Pump 4000/10 bar, 588/40 bar Electric roll-up rapid attack, 60 m Water/foam thrower Self-protection system - Tire extinguishing nozzles - for cooling and protecting the tires (The extinguishing nozzles can also be used to extinguish slope fires. Power AIR Box charge retention Light mast Rear view camera All-round LED lighting PA brackets in the crew compartment We would also be happy to discuss other equipment options for your vehicle. Our experts are available to carry out individual conversion work. If you have any further questions, please do not hesitate to contact us. We would also be happy to send you further information and detailed photos. *All information is provided to the best of our knowledge and belief, without Guarantee for completeness and accuracy.

Condition: used, mileage: 28,400 km, power: 96 kW (130.52 HP), fuel type: gasoline, gearing type: mechanical, overall weight: 1,973 kg, first registration: 01/2022, emission class: euro6, color: white, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * To ensure you receive the best possible advice, please make an appointment. * Mr. Kiel will be happy to assist you. * Tel: * BA3 Active Brake Assist * BB0 Brake system with ABS and ASR * BB3 Electronic Stability Program (ESP) * C6L Multifunction steering wheel * CL1 Steering wheel adjustable for tilt and height * D50 Continuous partition wall * E07 Hill start assist * E1D Digital radio (DAB) * E2X MBUX multimedia system with DAB * E4S Smartphone integration package * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F68 Heated and electrically adjustable exterior mirrors * FE3 Electric front windows with comfort control function * FG1 Armrest with storage compartment * FQ3 Glove compartment, passenger side, closed * FR8 Rear view camera * GK6 6-speed manual transmission * H06 Air conditioning * H10 Heated seats for driver and front passenger * H20 Heat-insulating glass all around * HI2 Climate zone 2 (moderate) * I3O No speed limit * I5C Gasoline engine * I5T Plastic underbody protection * I5V Foam-covered steering wheel * I5X Basic interior trim * IA0 4x2 wheel configuration * IF6 Panel van * IG4 Standard * J10 Speedometer km/h * J56 Seat belt reminder for driver and front passenger seat * JA5 Light and rain sensor * JB4 Active Lane Keeping Assist Lsdpfjv R Nycsx Aaljhn * JH3 Communication module (LTE) for digital services * JK5 Instrument cluster with color display * JW8 ATTENTION ASSIST * KA1 Particulate Filter * L12 Halogen Headlights * L16 Halogen Fog Lights * MA2 Speed Limit Assist * MJ8 ECO Start-Stop Function * MO6 Euro 6d Emissions Class M/N1 GR. II * MS1 Cruise Control * Q10 Trailer Hitch Crossbar * RY2 Wireless Tire Pressure Monitoring (Front and Rear Axles) * SD1 i-Size Child Seat Mount * SL2 Height-Adjustable Passenger Seat * T16 Sliding Door Right * T78 Sliding Door Rail Cover in Body Color * V29 Plastic Trunk/Load Compartment Floor * W50 Double-Leaf Rear Door, 180 Degrees, Without Window * We would be happy to make you an offer for the trade-in of your used vehicle. * If you would like to lease or finance your vehicle, we would be happy to make you a customized offer. * Subject to errors and prior sale. * Mr. Kiel will be happy to assist you.

Condition: used, Year of construction: 2015, For sale: Complete robot milling cell with ABB IRB 4400, year 2015. The cell was built and commissioned in 2016 by RobMaxx (robot-machining.de). Usage: Exclusively used for milling prototypes from soft foam Very low operating hours: approx. 2,000–3,000 h Scope of supply: - ABB IRB 4400 robot, year 2015 - Control panel - Control cabinet for the robot, automatic tool changer, air supply and extraction system, including cooling air conditioner - Cell constructed from aluminum profiles with double windows (presumably plexiglass) - ESTA 81200 EUROSOG-I-D ATEX extraction system, year 2016 - 360° aluminum rotary table - Robot base/table constructed from aluminum profiles with a fully machined aluminum plate (leveled with adjustable feet) - Automatic tool magazine for 22 tools - High-speed spindle 36,000 rpm by DIEBOLD, liquid-cooled with air support - Complete documentation - Invoice with 23% VAT or intra-community delivery (0%) Condition: Inspection required Damage: Display – F Lhjdoxn Dgbopfx Aalsn Price: €28,999 Pickup location: 58-500 Jelenia Góra, Poland Invoice available

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes Lhjdpfxjwgc I Ro Aaljn • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, Year of construction: 2025, functionality: fully functional, The KM 70/25 C hand-operated sweeper makes cleaning of hard surfaces both indoors and outdoors effective and efficient. The main roller brush and side brushes are battery-powered, significantly increasing operator comfort: users can easily sweep corners and hard-to-reach areas with much less physical effort. The foam filter with passive suction minimizes dust generation and keeps the work environment clean. The roller brush can be adjusted in six steps, tailoring cleaning performance to different surface types. A practical storage tray for additional equipment such as buckets or coarse dirt pickers facilitates operation. Tool-free replacement of the side brush and filter also makes maintenance straightforward. The 36 V Kärcher Battery Power battery platform provides ample power in any situation. The removable battery is easy to take out for convenient transport. The machine is supplied with two batteries and a charger. Lsdoxf Hn Ajpfx Aalshn Technical specifications: - Working width with two side brushes: 980 mm - Container volume: 20 liters - Area performance: 3,920 m²/h

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7914, 7913, Groninger KFVG 251 - High-precision filling and closing machine with rotary table DTE 1000 Model: KFVG 251 Rotary table: DTE 1000 Machine no.: 7914 (KFVG 251) / 7913 (DTE 1000) Manufacturer: Groninger & Co. GmbH Year of manufacture: 2008 Condition: Very good used condition, ready for immediate use Machine description The Groninger KFVG 251 is a high-precision, automatic filling and closing machine for liquid products in bottles. It was specially developed for the pharmaceutical, cosmetic and chemical industries and meets the highest GMP standards. The machine is equipped with a peristaltic filling system, which ensures precise and gentle dosing. The rotary piston pump is not included in the scope of delivery, but can be retrofitted. Main features Filling and closing module with integrated screw cap technology DTE 1000 turntable for optimized product flow Siemens PLC control (S7-414-2 DP) for intuitive operation GMP-compliant design & validatable Separate control cabinet for maximum operational reliability Highly efficient peristaltic filling for exact dosing Easy cleaning and maintenance Technical data Bottle sizes: Ø 45 – 65 mm Production capacity: Up to 100 bottles/minute Control: Siemens PLC S7-414-2 DP Mains voltage: 3x 230/400V, 50 Hz Compressed air: 5 – 6 bar (filtered, dried air) Machine dimensions: Filling/closing unit: 6005 mm x 2156 mm DTE 1000 turntable: Ø 900 mm Equipment & Components Filling needle with adjustable movement to prevent foam formation Sorting vibrator & dropper insertion station for efficient closure placement Torque-controlled screwing station for optimal closure quality Pneumatic pressure control & monitoring for stable operation Lhsdovxhx Tjpfx Aalsn Good discharge & bad discharge for quality assurance EMERGENCY STOP switch & safety covers for maximum safety Operation & safety features Automatic and manual control via Siemens PLC Multi-level user management with password protection Clear control panel with function keys and touchscreen elements Detailed error diagnosis and fault messages Secure operating modes (setup / automatic) Service & maintenance Detailed maintenance intervals (daily, 160h, 1000h, 2000h) Cleaning with approved disinfectants (do not use chlorine-containing agents!) Maintenance steps for drive, pneumatics, conveyor belt and seals documented Format change & flexibility Quick change of format parts for different bottle sizes All setting values can be saved via the control panel Detailed instructions for exchanging the format parts included Scope of delivery Groninger KFVG 251 DTE 1000 turntable Peristaltic filling (2-digit, 50/50 filling) Control cabinet with Siemens PLC Pneumatic and electrical circuit diagrams Spare parts lists Transport and installation instructions Price and availability Location: EXW 42699 Solingen, Germany Viewing possible by appointment This machine has been regularly serviced and is in very good technical condition. It offers an excellent opportunity to purchase a high-performance filling and sealing machine at an attractive price. New price in 2008: €330,000 (excluding format parts) New price in 2025: approx. €750,000

Condition: used, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 12/2023, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, loading space volume: 18 m³, color: grey, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, tail-lift, RENTAL PURCHASE * LEASING * FINANCING AT TOP CONDITIONS Iveco Daily 35S18HA8, Euro VI, 176 HP, 3.0 Diesel, 8-speed automatic – white – new vehicle with initial registration Package CONNECT MANUAL - Adaptive Cruise Control (ACC) with radar sensor - Padded, comfortable driver’s seat (3-way adjustment, lumbar support, armrest) - DAILY front grille with chrome strips - Additional adjustable speed switch - Mechanical parking brake - Leather steering wheel - TFT color display (km/h) - Double passenger bench with fold-down table, three-point seat belts - Telematics connectivity module (3G) - Full LED lighting (daytime running lights, low beam, high beam) - HI-CONNECT digital radio, steering wheel controls, Bluetooth, outputs + European navigation - Air conditioning compressor 170 cm³ - Fog lights - Cabin ventilation and heating system with automatic air conditioning - Full memory foam headrests, upholstered, with Daily logo Ljdpoxhbncofx Aalehn Safety: - Driver’s airbag Comfort and Functionality: - Heated and electrically adjustable rear-view mirrors - Central locking with remote control - ESP9 - Electrically operated side windows - HBA (hydraulic brake assist) Cabin: - Single passenger seat, fully adjustable - Overhead shelf above the windshield - Driver’s seat adjustable in three directions, rigid design - Heat-insulating and tinted windows - Side mirror arms with width of 2.35 m - Daytime running lights Other: - Hill holder - ROM (anti-rollover system) - RMI (dynamic anti-rollover system) - Tire repair kit - Management support - TSM (trailer sway mitigation system) - LAC (load control system) Body: - Box body 4200 mm x 2100 mm x 2100 mm - Tail lift 750 kg - Side door - Roof spoiler Vehicle available immediately RENTAL PURCHASE * LEASING * FINANCING AT TOP CONDITIONS Welcome to carmax24 Today you have the opportunity to purchase one of our carefully selected and inspected vehicles. Expertly evaluated, high-quality vehicles ensure high customer satisfaction, and that's been our promise since 2008. This is our daily commitment, because you, the customer, are our #1 priority at carmax24.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, cutting width (max.): 2,500 mm, cutting length (max.): 1,600 mm, Equipment: safety light barrier, 2021 - VeloBlade DG 2516 Digital Flatbed Cut/Crease/Sample Maker. Max. sheet size (mm/inches) 2500mmx1600mm/98”x63” Design & Performance A digital die-cutter that gives you the freedom to easily create unique and intricate products at the most cost-effective price on the market. Integrated with high quality cutting, creasing and perforating tools, the VeloBlade Nexus enables you to cut any shape or structure directly from your designs, in just one pass. Materials are held securely in place using the high-quality vacuum grip conveyor belt with a lateral pull force of 151.5N. Material fixing: Vacuum Min. sheet size (mm/inches) 210mmx297mm/8”x12” Tools: Circular Knife, drag knife, crease wheel, kiss cut knife, v-cut knife, oscillating knife (optional) and CNC router (optional) Blade Over 100 options Max. cutting speed 1500mm/s Max. cut depth =25mm (with oscillating/routing tool) Cutting Media AS PP paper, stickers, PVC board, KT board, foamed PVC board, acrylic sheets, dibond, vinyl, corrugated paper, honey comb board and many more. Repeat accuracy +0.1mm Driving system: Imported intelligent digital servo control system Camera registration system: CCD registration system Voltage 32 Amp / 3 phase socket required & 4 x 13 Amp sockets Power Consumption (W) 11500 Overall Dimensions (mm/inches) 3418x2402x1200mm/135x95x48” Gross Machine Weight 745Kg Tooling The machine comes with the following tooling: Pen Head 4 Blade/knife Heads Creasing and scoring Head Vacuum Head for Waste Many spare tools to go in the heads Lhjdjw Edbvepfx Aalen

Condition: excellent (used), Foaming robot Year of manufacture: 2020 Payload: 20 kg Robot weight: 560 kg Lhjdpoxlpyzsfx Aaljn Serial number: R19750-818-1 Country of manufacture: Japan

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Ledpfx Ajfhgvwsaljhn Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: new, overall weight: 1,800 kg, empty load weight: 870 kg, maximum load weight: 930 kg, axle configuration: 1 axle, loading space volume: 18 m³, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 165r13c, Sturdy, high-quality sales trailers for snacks or goods. The SELLER snack trailers are manufactured with an insulated sandwich body. The extremely stable steel frame is welded and hot-dip galvanized for high stability. The flap and entrance door have a welded frame so that the sales box remains permanently stable. A lockable personal lock made of steel and not plastic is installed in the door. The 30 mm sandwich body has a galvanized outer skin which is powder-coated. The insulation is a foamed PUR core. The car trailer is silver-grey on the outside and white on the inside. Four crankable supports provide stable support for the snack trailer. An inexpensive car trailer for the market, snack bar, non-food, street food, cocktails, fast food and other goods for sale. Financing: possible WITHOUT down payment!!! You can find other sizes, equipment and other affordable models in our store: ----- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! for the prices. ----- Lhsdpfxsd U Itws Aalon PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Year of construction: 2008, operating hours: 40,792 h, condition: ready for operation (used), functionality: fully functional, I am offering for sale an automatic injection molding machine from the renowned German manufacturer KURTZ GmbH, model K1318HP5MP. The machine was used in a production facility for processing EPP plastics. The device is equipped with all required CE markings and the manufacturer's nameplate. The machine stands out for its robust, heavy-duty construction and high reliability. ⚙️ Technical specifications: Type: automatic injection molding machine / plastics foaming machine Control: semi-automatic / automatic Year of manufacture: 2008 Weight: 16 tons Power: 65 kW Power supply: 400 V Lhedpsxp Hvhefx Aalon Dimensions and further technical details available on request ✅ Condition and readiness: The unit was in continuous operation until recently We offer assistance with loading and transport

Condition: good (used), Year of construction: 2009, Manufacturer: Audion Elektro Type: AVP 600-2 Year of construction: 2009 Power 0.7kW AUDION Veggiepack is a unique semi-automatic packaging machine for round vegetables, such as lettuce, cabbage, broccoli, cauliflower etc. The product is dense polypropylene or they are wrapped in styrofoam so that no unnecessary foil is left around the product. The product is protected from damage and the round packaging underlines its appearance. Product features: Sealed at the bottom of the product Empty foil and product separately Film positioning with photocell sensor Fast warm-up time No air compressor required Adjustable packing density AVP 600 specifications The size of the machine (HxWxH): 1230x830x960mm Machine weight: 220 kg Sealing bar: heat seal Lhodpeht Hkksfx Aalen Film: (perforated) CPP, OPP, polystyrene Foil thickness: approx. 15 microns Foil width: 520-600 mm Product Length: Up to 220mm Product Height: Up to 175mm Production capacity: Max. 550 / hour Voltage: 230V / 1ph / 50Hz Power consumption: 700 watts