Used Flooding System for sale (83)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Dcedewc Nvgjpfx Ahusp Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Djdpfjwl Ea Tsx Ahuscp Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. WARNING ! 3 ITEMS AVAILABLE: 1. MACHINE IS RETURNED, SERVICED, ASSEMBLED (poz.519) 2. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER ,COMPLETE, ASSEMBLED (poz. 518) 3. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER AND BELT COVER, ASSEMBLED (poz. 517)

Condition: as good as new (ex-display), Semi-automatic Universal Screen Printing Machine TIC SCF 550 DHE Flat and rotary printing machine, floor-standing model, printing format 300 x 450 mm or printing diameter 160 x 300 mm, max. screen frame size 730 x 530 x 30 mm. Machine comes with base frame and height-adjustable feed table with XY-adjustment capabilities. Height adjustment of feed table approx. 300 mm, allowing a max. print object height of approx. 450 mm. Upper frame with continuous lateral safety guard, equipped with 2 squeegee sets, requires 6 bar compressed air, connection: 230V, 50Hz. Unused demonstration model. Dodpfow N N Iujx Ahuscp Electro-pneumatically controlled machine with microprocessor control. Flatbed printing with T-slot table plate (option: vacuum table plate with vacuum pump), rotary printing with universal holder for cylindrical items as well as rack-and-pinion drive for multi-color printing, including inflation device. In setup mode, print movement can be adjusted individually. Squeegee stroke, squeegee pressure and flood coater are steplessly adjustable.

Condition: good (used), Smicon FTA 1500U-6L fumigation / gassing system In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Former list price 9,900 € Dcjdjdviyxepfx Ahusp Item condition: used More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2023, operating hours: 473 h, condition: ready for operation (used), functionality: fully functional, load capacity: 150 kg, workpiece length (max.): 480 mm, workpiece width (max.): 670 mm, workpiece height (max.): 300 mm, machine/vehicle number: 500022, TECHNICAL DETAILS Basket dimensions: 670 mm x 480 mm x 300 mm Maximum load weight: 150 kg Loading height: 850 mm Cleaning Ultrasonic frequency: 25 kHz or 75 kHz Cleaning programs: 20 individually configurable Mechanism Type and speed of rotating movement: Freely adjustable Media Circuits Circuit 1: Spray cleaning, flood cleaning, pressure-flood cleaning, suction-flood cleaning, ultrasonic cleaning Circuit 2: Spray cleaning, flood cleaning, suction-flood cleaning, ultrasonic cleaning Circuit 3: Spray cleaning, flood cleaning, batch-flood cleaning, ultrasonic cleaning Drying: Compressed air pulse, hot air drying, hot air drying with humidity sensor, vacuum drying Tank 1 Flow rate: 350 L/min Dcjdpfjxamhlsx Ahusp Pump pressure: 3.5 bar Pump motor power: 5.5 kW Tank volume: 450 liters Tanks 2 & 3 Flow rate: 380 L/min Pump pressure: 2.5 bar Pump motor power: 3 kW Tank volume: 350 liters MACHINE DETAILS System weight: 2,400 kg Dimensions: 3,100 mm x 2,200 mm x 2,200 mm Process chamber and tanks: Stainless steel Electric tank heating: Freely adjustable temperature Control: SIMATIC F-CPU Operating hours: 473 h EQUIPMENT - Bypass filtration for all baths - Compressed air pulses - Spray device

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2016, operating hours: 9 h, Hybrid LED light tower Smart solar battery and diesel power system Brand: Verdegro Type: LLTT-H Year: 2016 Solar power system (350 W) Dodpfjwhmqrex Ahuscp High efficiency LED flood lights. Photocell daylight sensor (automatic/on/off) Spring-driven cable drum Optional: Geo fencing by DSE web interface 7 section vertical tower (steel galvanized) Forklift sprockets on top + below chassis Information LED backlight controller screen Hybrid diesel generator Fuel tank capacity 140 L Drip tray / spill container Four telescoping outriggers and leveling jacks Torsion rubber suspension axle

Condition: excellent (used), EOS Type: P385 similar to a P390 Laser has been renewed and is unused! Plastic laser sintering system for the direct production of series, spare parts, functional prototypes Dedpoubxkmjfx Ahuocp and samples for investment casting or vacuum casting. Machine description: Condition of the machine/system: Dimensions: System P385 (dimensions 2000x1220x1250) Cooler (dimensions 930x610x600) Control panel (dimensions 1580x950x800) Control cabinet (dimensions 2100x610x950) Technical data: Effective construction volume 340 mm x 340 mm x 620 mm Construction speed (depending on material) up to 31 mm/h Layer thickness (depending on material) 0.06 – 0.10 – 0.12 – 0.15 – 0.18 mm Support structure not required Laser type CO 2 , 50 W Precision optics F-Theta lens Scan speed up to 8 m/s Power supply 32 A Maximum energy consumption 10 kW / typically 2.4 kW Integrated nitrogen generator (optional) Compressed air supply at least 5,000 hPa; 6 m³/h Voltage: 3/N/PE/ 400 V AC Frequency: 50/60 Hz Modified surface module from a heated nitrogen flood Connection value: 12 kW Rated short-circuit current: 5 kA Fuse: 3x 32 A Current consumption: 18 A Max. laser power (10.6µm) 100 W Laser class open 4 Laser class closed 1 Weight: approx. 1,060 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, working width: 400 mm, total length: 2,150 mm, total height: 1,600 mm, total width: 1,000 mm, working height: 950 mm, input voltage: 400 V, year of last overhaul: 2025, power: 1.5 kW (2.04 HP), warranty duration: 12 months, compressed air connection: 8 bar, - DEMO machine from our technicial center for special price! - Since 1970 Ceetec A/S produces wood painting machines in Norre Aaby, Denmark. Dodjffc Raopfx Ahuscp According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our brush painting machine A250 is equipped with flood nozzles for painting all around and with up to 8 brushes (each 2 per side) and can paint wood for interior and exterior on all four sides in one shift. Speed: 16-42m/min max. height: 250mm max. width: 250mm resp. 380mm (A380) min. length: 800mm It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: used, Semi-automatic screen printing machine SIRIMAC 4560E Dedow N N Arspfx Ahuscp Electromechanical machine with parallel lifting upper frame, print area: 45 x 60 cm, vacuum table plate: 60 x 80 cm, screen size: 75 x 100 cm, screen up-and-down motion via geared brake motor, with cross-travel squeegee system, motorized and adjustable squeegee drive, print and flood speed independently adjustable, adjustable squeegee stroke via limit switch, with pneumatic squeegee reversal, pneumatic squeegee and flood squeegee pressure adjustable via manometer, print and flood squeegees with quick-clamp system, adjustable screen lift, with pre-vacuum function, single-stroke or automatic print mode selectable, pre-squeegee function, multiple print, connection: 400V, 50Hz, 10A, compressed air 6 bar required, used condition.

Condition: used, functionality: fully functional, Ultrasonic washing system, make Branson Type: EVD Power: 400 V / 30 A Dedpow Evnzjfx Ahuocp Functionality: The vacuum chamber is loaded with workpiece carriers measuring 50 × 30 × 20 cm. The chamber is then flooded with detergent and ultrasonic cleaning takes place. After the cleaning phase, the chamber is evacuated. The next step involves steam treatment, followed by another vacuum process. The result is grease-free and dry products.

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 Dodpfx Ajudi Unjhuecp 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Year of construction: 2015, condition: ready for operation (used), A Niehoff CNC wire spooling machine is available. Materials: copper/aluminum/iron/stainless steel/textile, wire diameter range: 0.05mm-0.4mm, spool speed: 5940rpm, spool speed: 600m/min. Total spool width: 108mm, max. spool weight: 3kg, spool axis: horizontal. Machine dimensions X/Y/Z: approx. 1500mm/1200mm/1900mm, weight: approx. 350kg. The machine had flood damage. The display is new and everything works except the spool deposit (probably a relay card error). Documentation available. On-site inspection is possible. Dodpfxowkuzws Ahuecp

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Dcjdpfx Aou Ebt Ujhusp Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Smicon AFT 2/1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth), killing all the bacteria. Dsdpfx Ajdviynehuscp Former list price 10,900 € net More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: reconditioned (used), Year of construction: 2006, 1/2-automatic screen printing machine THIEME 55x75, special model Dcedpsw N Nzuefx Ahuep Print format 55 x 75 cm, screen frame size 100 x 110 cm, parallel-lifting machine with extendable vacuum table plate, electromechanical machine with pneumatic squeegee pressure control, with separate control panel, usable either left- or right-sided, complete with 3 sets of squeegees and flood bars, used, model year 2006, completely overhauled and repainted, technically and visually in good condition.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: xxxxx, Washing machine Manufacturer: CIEFFE Type: WCR 8/X/"/VAP/US/G-R Year of construction: 2007 Heating: 120kW gas Evaporator vacuum boiler, ultrasonic, dryer, compact de-oiler, level controller Cleaner tank 4500 ltr. Flood tank 4500 Ltd. Dcodpeqtyxkefx Ahuop

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 Dcjdpfxovuf S Ne Ahuep 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: used, Year of construction: 2003, operating hours: 38,499 h, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, type of input current: AC, With chip conveyor, left-side ejection, hinged belt design Operating hours: 38,499 Mazatrol 640M control system Tool magazine for 48 tools Work table Table size (clamping surface): 760 x 2,000 mm Table load: max. 1,400 kg Table configuration: 5 x 18 mm T-slots, 125 mm spacing Reference T-slot: 18 mm H in the table center Table height from floor: 875 mm Travel ranges Travel path: X-axis 1,740 mm Y-axis 760 mm Z-axis 660 mm Rapid traverse speed: X-axis 36 m/min Y-axis 36 m/min Z-axis 36 m/min Feed rate 1 - 8,000 mm/min Distance from spindle nose to table 180 - 840 mm Distance from the front of the column to the spindle center: 830 mm Work spindle speed range (infinitely variable) 40 - 12,000 rpm Steep taper chuck: CAT 40 Main drive power, AC motor: 18.5 / 11 / 7.5 kW Torque: max. 98 Nm Cutting performance (test results) Milling performance C 45 approx. 416 cc/min Drilling performance C 45 Ø 25 mm Tapping performance C 45 M 24 x 3 * Machining performance depends on the condition of the workpiece, the tooling, and the clamping device. Coolant system Tank capacity: 365 l Flood cooling: Pump flow rate approx. 24 l/min Pump pressure: approx. 5 bar - Air blower on the spindle - High-pressure cooling through the spindle, pressure approx. 15 bar Dcsdpfowf Duvex Ahuep - Preparation for Mazak Monitoring System B, optical type touch probe MP-12 - 2 additional M-function sets (2 M-functions per set) Partition for reciprocating machining - Renihaw measuring system NC-1 Mazak Monitoring System B, optical type touch probe MP-12 CNC "Performance" option package 15 wipers (scrapers) No.: J09KXSW10S0

Condition: used, SLM Solutions Type: SLM 500 Build space (L x W x H): 500 x 280 x 365 mm (minus substrate plate height) 3D optics configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm, Min. structure size 150 µm Focus diameter 80 µm - 115 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 16 l/min (argon) Average protective gas consumption in the flooding process: 250 l/min (argon) Dsdpsv Iff Nsfx Ahuscp Powder supply with 90 kg Electrical connection / power consumption: 400 volts 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Was operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2003, condition: good (used), Smicon PT 1500 fumigation Fumigation system Fumigation machine Disinfection machine; Smicon PT 1500 fumigation / fumigation system During fumigation, a room is flooded with a toxic gas to combat pests/bacteria. As these are toxic gases, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g. grain storage, in harbor warehouses, silos, mills) and also in churches to combat woodworm. Dsdpfou Ny Ncox Ahuecp It is a device that is used to disinfect rooms. Formaldehyde is boiled on the left hotplate and placed together with condensed water (right hotplate) in an air stream in a room and kills all bacteria there. Former list price € 9,900 Item condition: used

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: vec1206-L-1809RO1, input voltage: 400 V, total length: 7,000 mm, total width: 7,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, type of input current: three-phase, year of last overhaul: 2024, overall weight: 2,000 kg, input current: 11 A, mount diameter: 7,000 mm, loading space length: 7,000 mm, loading space width: 3,000 mm, loading space height: 2,000 mm, Laminated steel frame. safety bars for each print head and loading/unloading station. - Safety barrier to prevent operators from entering the stations during work -FOOT PEDAL (print order) -SERVOINDEXATOR-Precise pallet position control +/- .001". Ensures smooth indexing with superior print consistency -Increase production with precise control of acceleration and deceleration direction index: right and left -Programmed with Step-Back, Multi Step-Back and Cycle indexing options -Adjustment of the carousel stroke in both directions -15" TOUCHSCREEN with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View number of prints in real time, speed (pcs/hour) Save all parameters of a stored job: indexer speed, head speed Dcjdevccqxopfx Ahujp of printing, printing area, number of strokes, time and temperature flash polymerization, color design Setting the preheating temperature of the pallets Quick setting at the same print speed and distance for all heads -Electrically operated PRINT HEADS-10 stations, 6 colors, 4 intermediate flashes, 12 pallets -VERY USEFUL for printing with water-based ink (automatic screen flooding system with ink after printing) - adjusting the screens (templates) with maximum precision in 3 points (front-back, left-right, rotational movement) -adjusting the distance between the pallet and the screen giving you the flexibility to print practically any ink on any substrate at the touch of a button - independent adjustment of the angle of the scraper and counter-scraper, with possible adjustments do with one hand - INTERMEDIATE FLASHS - RAPID WAVE QUARTZ QUARTZ FLASH 51cmX53cm (12 lamps) maximum coverage area Each of them is divided into 3 separate areas (front, middle, back) that can be used depending of the print size: area one, area two, area three, each two/all three CONFIGURED FOR THE POSSIBILITY OF INTERMEDIATE DRYING AFTER EACH PRINT: PRINT/FLASH/PRINT/PRINT/FLASH/PRINT/FLASH/PRINT/FLASH/PRINT/FLA SH/PRINT (POLYCROMY AC-powered printheads enhance finesse, speed and power Front and rear travel adjustment One-handed tool-free squeegee/flood bar lock for quick and easy charging and changing 15" touch screen with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View real-time number of prints (dozen) and speed (pcs/hour) Save all parameters of a stored job: non-contact, indexer speed, indexer speed, printhead speed, print area, number of strokes, flash curing time and temperature, color design, mode Set the pallet preheat temperature Quickly set the same print speed and distance for all heads Print heads AC electric print heads for a stronger and smoother stroke Press the button at the loading/unloading stations to prevent printing on empty pallets Adjustable side supports for low-profile screens for easy access True three-point micro-registration (front to back, left to right and roll motion)

Condition: repair required (used), functionality: not functional, mileage: 10,000 km, power: 84 kW (114.21 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,900 mm, overall weight: 3,500 kg, empty load weight: 2,570 kg, maximum load weight: 930 kg, first registration: 05/2022, next inspection (TÜV): 05/2026, loading space length: 3,950 mm, loading space width: 2,100 mm, loading space height: 2,250 mm, emission class: euro6, energy efficiency: A+, color: white, driver cabin: other, suspension: steel-air, tire size: 225/65 R 16C, number of seats: 3, number of previous owners: 1, Year of construction: 2022, machine/vehicle number: W1V9101331N166933, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), onboard computer, power assisted steering, spoiler, FLOODED VEHICLE NOT RUNNING DOES NOT START DOES NOT START BRAND MERCEDES BENZ TYPE VAN WITH ALLOY BOX MODEL SPRINTER 311 DATE OF REGISTRATION 05/2022 KM TRAVELLED 10000 POWER (HP/KW) 115 HP EMISSION Euro 6D CONDITION Used Dcedpfewmd Ixjx Ahuop EQUIPMENT ALLOY BOX 3950 MM X 2100 MM X 2250 H RADIO FRONT-WHEEL DRIVE _____ ALL VEHICLES FOR SALE CAN BE CHECKED AND INSPECTED. OUR SALES PEOPLE ARE AT YOUR DISPOSAL FROM MONDAY TO FRIDAY FROM 8.30 TO 18.00 AND ON SATURDAY FROM 8.00 TO 12.00. TO REACH US BY CAR EXIT MOTORWAY A31 THIENE, BY TRAIN THIENE FS STATION. Trucks Italiana srl Dealer

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Djdpfxoncd S Uj Ahuscp Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: good (used), Here we offer a PINK vacuum drying oven. Vacuum drying oven PINK Space required for operation and maintenance Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions VT External dimensions: Width approx. 1170 mm Depth approx. 1380 mm Height approx. 1615 mm Total height 1970 mm Interior dimensions: Width approx. 360 mm Depth approx. 735 mm Height approx. 300 mm Vacuum chamber volume 79 liters Operating temperature min. 20 °C max. 150 °C Electrical connection Connected load 3 x 400 V; 50 Hz N / PE 8.5 kVA Heating capacity 6 kW Cooling capacity 6 KW at 15 °C media temperature and 15 °C cooling water Heating: Floor, ceiling, side walls and door double-walled, flooded with thermal medium Heat transfer medium: Mobiltherm 32 heat transfer oil Filling quantity approx. 20 liters depending on the length of the pipework Dodpfx Aedf Rw Sshuocp Compressed air pressure 6 bar Nitrogen N2 pressure Nitrogen N2 pressure Allowable operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system 3 bar Weight: 300 kg Type: PINK VT 300-600-300-1 Condition: gebraucht / used Scope of delivery: (PINK VT 300-600-300-1, operating instructions) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), SLM Solutions Dcedpfx Aou Ebufjhuop Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.