Used Flexible for sale (2,952)

Condition: new, mileage: 100 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, color: black, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Equipment list WHEELBASE 5500 MM AIR INTAKE, CORNER-MOUNTED, INTEGRATED IN CAB WATER PUMP, REGULATED INSECT PROTECTION GRILLE, IN FRONT OF RADIATOR HIGH PERFORMANCE ENGINE BRAKE AIR COMPRESSOR, TWO-STAGE, SWITCHABLE FRAME, SCREWED FRAME OVERHANG 1350 MM ADBLUE TANK 75L, LEFT TANKS, LOCKABLE PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM TANK CROSS-SECTION, NARROW TANK CROSS-SECTION, LOW EXHAUST SYSTEM, TAILPIPE TO THE RIGHT OUTSIDE EXHAUST BOX FENDER, FRONT, RIVETED, AERODYNAMICALLY OPTIMIZED FENDER, FOR CHASSIS EXTENSION SPLASH GUARD (EC), FRONT FRONT UNDERRUN PROTECTION (ECE), ALUMINUM BUMPER, CORNERS MADE OF PLASTIC BUMPER, CENTER SECTION WITH TOWING EYE BRAKE SYSTEM CAB TILT MECHANISM, MECHANICAL-HYDRAULIC WINDSCREEN TINTED, WITH BAND FILTER LIGHT SENSOR RAIN SENSOR STORAGE COMPARTMENT, LEFT BELOW CAB ENTRY, LACKED DOOR EXTENSION CAB ENTRY LEFT/RIGHT, FIXED FRONT MIRROR, HEATED MIRRORCAM SUN VISOR, EXTERIOR, TRANSPARENT A-PILLAR TRIM, AERODYNAMICALLY OPTIMIZED OMISSION OF WIND DEFLECTORS AIR HORN, CAB ROOF CLOSING SYSTEM, WITH CENTRAL LOCKING COMFORT CLOSING SYSTEM CAB INTERIOR DRIVER'S AIR-SUSPENDED SEAT, CLIMATE-CONTROLLED PASSENGER FUNCTIONAL SEAT SEAT BACK, UNLOCKING, DRIVER'S SEAT ARMRESTS, ON BOTH SIDES, PASSENGER SEAT SEAT BELT WARNING SEAT COVER, DINAMICA, BLACK, DRIVER'S SEAT SEAT COVER, DINAMICA, BLACK, PASSENGER SEAT SEAT BOX LOW, LOWERED BY 40 MM COMFORT BED, LOWER MATTRESS TOPPER FOR COMFORT BED, LOWER MATTRESS, EXTRA PREMIUM COMFORT, LOWER PREPARATION COMFORT BED, UPPER, WIDE LEATHER STEERING WHEEL AIRBAG, DRIVER FLOOR MAT, ENGINE TUNNEL THE SUNBLIND, 1-PART, ELECTRIC WINDSCREEN BLIND, ACROSS IN FRONT OF BED (EN) SUNBLIND, SIDE, DRIVER AND PASSENGER SIDE REAR VIEW CAMERA, TRACTOR UNIT TACHOGRAPH MANUFACTURER VDO MULTIMEDIA COCKPIT INTERACTIVE 2 PREPARATION REMOTE TRUCK 3.0 APP DIGITAL RADIO J2J SOUND SYSTEM NAVIGATION SYSTEM INTERFACE, FLEET MANAGEMENT SYSTEM EMS REMOTE UPDATE OF DRIVER ASSISTANCE MAP PREREQUISITE FLEETBOARD MANAGER APP PREPARATION FOR WALL FIXING SOCKET 24 V/15 A, REAR SEAT PREPARATION FOR ELECTRICAL EQUIPMENT LED AMBIENT LIGHTING, DRIVING AND LIVING 2 LED WORK LIGHTS, SWAN NECK AUXILIARY HEATER, HOT WATER CAB NOISE AND HEAT INSULATION ELECTRIC STAND-ALONE AIR CONDITIONING SYSTEM CLIMATE CONTROL STORAGE COMPARTMENTS, ABOVE WINDSCREEN, ONE LOCKABLE STORAGE COMPARTMENT COVER, DRIVER AND PASSENGER SIDE DRAWERS, UNDER BED DRAWER, UNDER BULKHEAD SHELVING SYSTEM, FLEXIBLE, FOR STORAGE ABOVE WINDSCREEN TABLE, ON PASSENGER SIDE Y1T NOTEBOOK HOLDER REFRIGERATOR, IN DRAWER, UNDER BED THE COMPRESSED AIR CONNECTION, IN THE CAB ELECTRIC / ELECTRONICS CABLE REMOTE CONTROL FOR AIR SUSPENSION PREPARATION SWITCH, LIFT AXLE, SEMI-TRAILER/ TRAILER PSM 2ND GENERATION E4C ADDITIONAL FUNCTIONS, FOR BODY MANUFACTURER TRAILER SOCKET 24 V, 15-PIN LED DAYTIME RUNNING LIGHT LED HEADLIGHTS INTELLIGENT LIGHT FOG LIGHTS LED PREPARATION, HEADLIGHTS ADDITIONAL, ROOF REAR LIGHTING HARNESS, EXTENDED LED REAR LIGHTS PREPARATION, WORK LIGHTS, CAB REAR LED SIDE MARKER LIGHTS SIDE MARKER LIGHTS, BLINKING PREPARATION ALL-ROUND ROTATING BEACON LED BLINKERS IN LIGHT SIGNATURE PHOTO MERCEDES STAR, ILLUMINATED LIGHTING REGULATION SPEED LIMITER 90 KM/H / 56 MPH, ECE GOT PREDICTIVE POWERTRAIN CONTROL J7V DRIVER ASSISTANCE ATTENTION ASSIST S10 TRAFFIC SIGN RECOGNITION ACTIVE BRAKE ASSIST 6 ACTIVE SIDEGUARD ASSIST 2 FRONTGUARD ASSIST Itedpfx Ajz Sit Iokpon

Condition: good (used), Year of construction: 2009, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL SPECIFICATIONS Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2009 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 24,000 rpm Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter at 150–12,000 rpm: 80 mm Max. tool diameter at 12,000–15,000 rpm: 60 mm Max. tool diameter at 15,000–20,000 rpm: 45 mm Max. tool diameter at 20,000–24,000 rpm: 40 mm Permissible table load: 300 kg SCOPE OF DELIVERY Itsdpfexflr Hex Akpsn Includes (not limited to): CNC machining center Fanuc Robodrill α-T21iFa Rotary unit for 4th and 5th axis Coolant pump and chip tray Exact scope of delivery according to photo series The Fanuc Robodrill α-T21iFa, built in 2009, is a versatile CNC machining center equipped with an additional 4th and 5th axis through the integrated rotary unit. This extension enables demanding multi-axis machining applications and significantly increases production flexibility. With a spindle speed of up to 24,000 rpm and travels of 500 x 400 x 330 mm, this machine provides ideal conditions for precise milling operations with high productivity. The 21-position tool magazine reduces setup times and allows for rapid tool changes. Thanks to its robust construction, a table load capacity of up to 300 kg, and the powerful Fanuc 31i control unit, this machine is perfectly suited for both series production and complex single parts. The integrated coolant system ensures process reliability and long tool life. No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: used, Year of construction: 2013, number of controlled axis 6 STK workpiece weight 60 kg throat 820 mm weight of the machine ca. 0,665 t dimensions of the machine ca. 30 m³ The KR 60-3 industrial robot is a front-runner in its class thanks to its high flexibility and long reach with optimum load capacity. KUKA robot type: KR 60-3 Installation position: Floor Number of axes: 6 Maximum load of the robot: 60 kg Maximum reach: 2230 mm Repeatability: ± 0.06 mm Control system: KR C4 Weight approx. 665 kg Robot movement speed Axis 1: 128 °/s Axis 2: 102 °/s Axis 3: 128 °/s Axis 4: 260 °/s Axis 5: 245 °/s Iedpezupmgjfx Akpetn Axis 6: 322 °/s Axis range (in º) Axis 1: ±185 ° Axis 2: -135 ° / 35 ° Axis 3: -120 ° / 158 ° Axis 4: ±350 ° Axis 5: ±119 ° Axis 6: ±350 °

Condition: used, Year of construction: 2016, Conveyor system for bulk solids Bulk solids conveying system using a flexible screw. The system comprises a FLEXICON stainless steel hopper with a pyramidal bottom, support legs and capacitive level sensor. UTFS-S045-010-X tubular conveyor, approximately 2 m long, fitted with a 114 mm diameter UHMW polyethylene outer tube and flat profile flexible internal screw. Discharge head with DRP-02214T-05-X geared motor. The drive incorporates a 2.2 kW three phase motor operating at 1,425 rpm and 50 Hz, with IP55 protection. The system is ATEX II 3D T125 certified, suitable for operation in Zone 22 environments containing combustible dust. Designed for conveying pellets, plastic granules, powders and other solid products with minimal segregation of blended materials. Ijdpfx Aoz R Auuokpjtn

Condition: new, machine/vehicle number: 0897, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, Equipment: Android Auto, air conditioning, navigation system, PROFI FOOD TRUCK RENAULT (NEW) – FULLY EQUIPPED & READY FOR IMMEDIATE USE! Start your successful food business right away! This new food truck combines the highest functionality, top-notch premium quality, and a modern design. Equipped with a brand-new, professional stainless steel kitchen, the vehicle meets all gastronomy and hygiene standards. Your highlights at a glance: 🚚 Driver’s license class B: Max. 3,500 kg gross vehicle weight – can be driven by anyone. 💳 Hire purchase & leasing: Flexible financing options available! 🛡️ Safety & warranty: 1 year warranty on the body and gastronomy kitchen + Renault manufacturer’s warranty. 📑 All-inclusive package: We will handle the TÜV inspection and expert opinion completely for you. VEHICLE & TECHNICAL DATA: Condition: NEW (Vehicle number: 0897) Engine & Power: Diesel, 125 kW (170 hp) | Euro 6 (Green environmental badge) Seats: 3 seats | Manual transmission | Summer tires Equipment: Parking sensors, reversing camera/display GASTRONOMY EQUIPMENT (STAINLESS STEEL): 🔥 Professional gas appliances (brand Bertos): Gas fryer “Bertos”, 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600 x 290, power: 13.2 kW, made of stainless steel, with drain valve, GL8+8B Gas stove “Bertos” with 4 burners, dimensions (W x D x H) 600 x 600 x 290, power: 12.4 kW, made of stainless steel, G6F4B Gas grill “Bertos”, smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B ❄️ Cooling & Hygiene: Refrigerator with glass door (perfect for drinks) Small under-counter refrigerator “Liebherr” 💧 Water system: Water system with water canisters, 30 liter capacity with fresh and wastewater canisters Two stainless steel sinks with faucet Hygiene package consisting of a paper towel dispenser and a soap dispenser 10-liter hot water boiler Pump Itodpjz R R A Dsfx Akpsn ⚡ Lighting: LED lighting on the ceiling LED lighting with color effects around the service hatch with remote control Emergency light ✨ Safety & Extras: Serving counter and work surfaces made of brushed stainless steel Insulating wall at the cooking area (fireproof) Exhaust hood made of labyrinth filters Non-slip floor for gastronomy Sneeze guard optional Built-in insulated generator cabinet 🛠️ INDIVIDUAL CUSTOMIZATIONS POSSIBLE! Do you need a different length, more payload, or special equipment according to your wishes? We can also convert this model exactly according to your ideas! Contact us now for a viewing or a non-binding consultation.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Iedsz Sqq Topfx Akpjtn Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.

Condition: used, Year of construction: 2012, axis stroke (X,Y,Z) 5.910,1.815,655 mm Number of spindle head vertical 14 St. Number of spindles head horizontal 4 St. main drive 12 kW tool taper HSK F63 Number of axles 5 St. Number of tools 20 St. working area 5005 x 1450 x 200 mm Number of working hours 3108 h Masterwood Project 455 L, 5-axis CNC machining center ----- Machine can be viewed while still in operation! Sold ex-site. Dismantling and reinstallation by experienced Masterwood technicians available as an option! The Masterwood Project 455 L is a highly flexible, numerically controlled Iodpfx Aez Hz Iwskpjtn 5-axis machining center featuring a robust gantry design. It has been specifically developed for the sophisticated, complete processing (drilling, milling, grooving) of solid wood, panel materials, windows, doors, and stairs. Thanks to its extended "L" configuration, the machine offers an exceptionally large working area for extra-long components. Summary of technical specifications: ----- Travel ranges: X = 5,910 mm, Y = 1,815 mm, Z = 655 mm Max. workpiece dimensions: length 5,005 mm, depth 1,450 mm, height 200 mm Max. axis speed: X = 80 m/min | Y = 80 m/min | Z = 25 m/min Work table system: "TUBELESS" (hose-free) work table with vacuum clamping system Number of table beams: 8 table beams (L-version) Positioning aids: 4 workpiece lifting devices (for heavy components) Stops: 8 rear stops, 8 intermediate stops, 1 side stop on each side (right/left) Vacuum pump Main spindle: ----- Milling spindle (main spindle): 12 kW, 5-axis spindle Spindle cooling system: Liquid circulation cooling (for maximum continuous load) Tool holder: HSK-F63 C-axis (rotation): Indexable by ± 360° Fixed drilling head: ----- Total spindles: 19 independent drilling spindles. • Vertical spindles: 7 in the X-direction, 7 in the Y-direction. • Horizontal spindles: 2 double spindles in the X-direction, 1 double spindle in the Y-direction. • Spindle spacing: 32 mm standard grid. • Integrated grooving saw: Saw unit in the X-direction, saw blade Ø 125 mm (4,000 rpm). Tool changing system ----- Carousel magazine: 16-position tool changer Additional positions: Linear tool changer with 4 positions on the machine bed for large-format tools (e.g., profile cutters or saw blades up to Ø 350 mm). Control System & Software ----- Hardware: High-performance PC-based control system with a Windows interface and a 17" color TFT monitor. Network: Integrated Ethernet card for easy online connectivity. Software Package: • MasterWork: Graphical programming system (CAD/CAM interface, DXF import, macros). • Master AT: Graphical setup aid for the optimal positioning of vacuum pods and support beams. Remote Maintenance: Equipped for "Teleservice On-Line" for direct online troubleshooting. Accessories: ----- Various vacuum clamping devices 4 solid wood clamps Veneer stops Selected tools as shown (available upon request) ----- Price for the above-mentioned machine available upon request! ----- Further Information:...

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): Itjdpfxowgc I Rs Akpon • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: good (used), Siegmund System Perforated Table including Silverline Profile Processing Station For sale is an extremely robust, combined industrial workstation for metalworking, jig and fixture construction, or precise profile manufacturing. The system consists of top-quality components: 1. Siegmund System Perforated Table (base) - High-precision, extremely warp-resistant, and solid welding and clamping table from the world market leader, Siegmund. - The perforated system (including perforation on the side panels) allows for flexible and repeatable positioning of stops, clamping bolts, and angles. 2. Silverline Clamping & Processing System (assembly) - Solid upper structure with precise linear guides for longitudinal movement. - Two parallel-arranged, yellow motor heads (milling/drilling units) for simultaneous or staggered processing steps. - Three heavy-duty, horizontal clamping bars securely fix workpieces from the rear against the stops, ensuring material protection. 3. Pneumatic Comfort Control - Ergonomic control panel on the front with a 5-way numbered lever control. - Selective control of individual pneumatic cylinders. - Integrated analog pressure gauge and safety emergency stop switch. - Powerful, central electric motor for the mechanics/hydraulics. Dimensions: Itedpfeztawgex Akpjn Tabletop: 2000 x 1000 x 200 mm Table height: approx. 900 mm, height adjustable Overall dimensions: 2420 x 1400 x 1580 mm This offer is for one Siegmund System Perforated Table. "Everything from a single source: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 2020, condition: used, overall weight: 90,000 kg, total length: 9,500 mm, total width: 10,000 mm, total height: 7,000 mm, The BRETON MATRIX 1300 DY K30 is a 5-axis CNC gantry machining center with a movable gantry design for high-precision complete machining of large workpieces. The rigid steel construction, combined with direct measuring systems and high-dynamic axis drives, ensures high positioning accuracy and consistently stable machining quality. The machine is equipped with a HEIDENHAIN iTNC 640 HSCI CNC control system, including AFC (Adaptive Feed Control), AVD (Active Vibration Damping), and CTC (Cross Talk Compensation). These functions optimize the machining process, reduce vibrations, and improve surface quality and process reliability. The 40 kW high-speed spindle with up to 28,000 rpm features programmable internal cooling (IKZ) from 40 to 70 bar and is suitable for demanding milling operations on a wide variety of materials. The equipment includes a direct-drive NC rotary table Ø 3,500 mm with a table load capacity of up to 15,000 kg. The custom rotary table plate is equipped with 16 AMF zero-point clamping modules, enabling short setup times and flexible workpiece clamping. The machining center features an 80-tool magazine with HSK-A100 tool holder and an additional 3-tool pick-up magazine for large tools. A BLUM laser system for tool measurement and a wireless 3D probing system support automatic setup and monitoring of machining. Additional equipment includes two Barberis chip conveyors, a 2,500-liter coolant processing system with drum filter, oil separator, and coolant cooling, automatic front doors, a camera system for workspace monitoring, a wireless handwheel, and the Breton Smart Start & Stop energy-saving system. Control ON: 21,347 hours Machine ON: 13,503 hours Program runtime: 5,812 hours Spindle runtime: 5,740 hours Tool Changer: Yes Weight approx.: 90,000 kg Control: HEIDENHAIN iTNC 640 HSCI Itsdezknwcspfx Akpen Travel Z-axis: 1300 - mm Travel X-axis: 4000 - mm Dimensions (LxWxH) approx.: 9500 x 10000 x 7000 mm Travel Y-axis: 4000 - mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2017, operating hours: 13,310 h, 2017 | Atlas Copco XATS 900E | Used Air Compressor | 13310 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 25000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 15 inspection points 15 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good operating 400v compressor , condence came out when first start no further issues 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40511 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Iedpfx Asy Azn Uokpjtn We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, empty load weight: 2,700 kg, The modern VIP27 mini excavator is a professional, durable machine. The VIP27 model is the ideal choice for demanding construction, electrical, plumbing, renovation companies, as well as service providers in related industries. The VIP27 is additionally equipped with a swing boom, significantly facilitating work on confined job sites. The machine is also fitted with extendable tracks, ensuring improved stability and flexibility. We offer reliable after-sales support. The mini excavators are manufactured based on and under the supervision of European engineers. The machine is built on a robust chassis and is suitable for use under all conditions. TECHNICAL DATA: Model: VIP 27 Operating weight: 2,700 kg Bucket capacity: 20, 40, 100 liters Engine model: YANMAR Engine power: 15 kW Number of cylinders: 3 Oil cooler: Yes Swing boom: Yes Extendable rubber tracks: Yes (1.3 m–1.5 m) Max. gradeability: 30% Pump type: Piston pump Itsdpfx Aksw Ufwvjpsn Hydraulic pressure: 20.6 MPa Hydraulic oil flow: 36 l/min Travel speed: 2.6 / 4.5 km/h Slew speed: 9.5 rpm Max. digging force: 19.5 kN Tank capacity: 26 l DIMENSIONS: Overall width: 1,500 mm Overall height: 2,450 mm Overall length: 3,200 mm WORKING RANGE: Max. digging depth: 2,430 mm Max. dumping height: 2,610 mm Max. digging reach: 4,136 mm Max. ground reach: 4,100 mm Minimum swing radius: 750 mm 2-speed travel Heater Radio Fan PRICE: €21,000 net €24,990 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge stock of machines, with around 100 available at any given time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,300 kg, color: black, gearing type: automatic, number of seats: 8, total length: 5,450 mm, total width: 2,275 mm, total height: 1,994 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal Number: 4716.CHO26.TB26095 Errors and omissions excepted! ----SPECIAL EQUIPMENT * Trailer coupling, electrically pivoting * Exclusive Package: Panoramic sunroof - Rear seat package 21 (6 rear seats, sliding doors, left and right, 2nd row with 3 individual seats, outer seats heated, middle seat with folding table on the backrest, 3rd row with individual seats) - 15 B&O speakers - Ambient lighting * Windows, 2nd row: Opening windows in the side panels * Ford audio system with 13-inch multifunctional display and Ford SYNC 4 including navigation - DAB/DAB+ - Vehicle modem - 13-inch TFT multifunctional display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Fuel tank 70 l * Heated steering wheel * Matrix LED headlights, adaptive - LED low beam including all-weather light - LED high beam, glare-free - LED daytime running lights including integrated LED turn signals in front - LED cornering light, static - Speed-dependent beam adjustment - LED taillights * Sliding door, electrically operated, left and right - with hands-free function and including sunblind in the 2nd row - Ford Key Free system including Ford Power start function * Technology Package 6: Exterior mirrors, electrically adjustable, heated, and foldable - Audio system with 13-inch multifunctional display, Ford SYNC 4 - Blind Spot Assist including CTA with trailer recognition - Rear Collision Warning System - Pre-Collision Assist, camera and radar based - Driver drowsiness alert - Lane Keeping Assist, lane departure warning, lane change assist, lane centering - Traffic sign recognition - Wrong-way driver warning function - Parking assist system, front and rear - Adaptive cruise control including Stop&Go function - Intelligent speed limiter with speed limit display - 360° camera - Steering wheel in Sensico leather look FURTHER EQUIPMENT * 2-stage unlocking for passenger compartment and cargo area * 3 USB ports for the 2nd row * ABS * Airbag, passenger side - with airbag deactivation function * Airbag, driver side * Airbags: Side airbags - left and right * All-wheel drive * Overhead console * Roof rails, silver * Theft alarm THATCHAM - with interior monitoring in driver's cabin and cargo area including central locking with double locking * Vehicle modem - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Power windows, front, electrically operated - with quick-up/down function * Parking brake, electric * Ford Key Free system - including Ford Power start function Iodpsz Tdn Ujfx Akpotn * Windshield, heated * Glove compartment with lockable lid * Automatic climate control, 3-zone - with automatic temperature control for driver and passenger side as well as rear, separately adjustable - Auxiliary heater, electric - Electric temperature control in the rear * Charging station, inductive, in the center console, for mobile devices * Center console, large * Driver drowsiness alert * Emergency call assistant eCall * Picnic light * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 17 in Active Design, with Y-spokes, in Absolute Black with 215/60 R17C 109/107T tires * Windshield wipers with rain sensor * Sliding door, with power assist * Sliding door, left and right including sunblind in the 2nd row * Rail-based flexible seating system * Side windows, fixed, second and third row * Seat package 29: Passenger single seat, manually adjustab

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Ijdeziwwiopfx Akpstn Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Itedpfez Rwpyjx Akpjn Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.

Year of construction: 2026, condition: new, functionality: fully functional, REQUEST AVAILABILITY!!! YOU WILL RECEIVE NEW, ORIGINALLY PACKAGED GOODS. NEW GOODS IN ORIGINAL PACKAGING + 24 MONTHS MANUFACTURER'S WARRANTY + The iCombi Classic is the latest combination steamer from RATIONAL. The iCombi Classic 6-1/1 electric model is a true all-rounder and will quickly become an indispensable assistant in your kitchen. It replaces numerous conventional cooking appliances, is robust, powerful, efficient, and high-performing. The unit has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. The recommended retail price for this unit is €8,440 net. Service: We will gladly assist you in arranging a certified RATIONAL customer service throughout Germany. Our service for you: Up to 2 years manufacturer's warranty High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Checked & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The iCombi Classic from Rational is easy to operate. And it impresses with functions that ensure high cooking quality. So that, with your experience as a cook, you always achieve the result you envision. The iCombi Classic consistently delivers high-quality results: thanks to the measuring and control center for a uniform, individual cooking chamber climate. Thanks to a powerful fresh steam generator for optimal steam saturation. Thanks to powerful dehumidification, more fan wheels and optimal cooking chamber geometry. This ensures that the food is supplied with precise energy – and, when necessary, with particularly powerful energy. The result: a large loading capacity with outstanding consistency across all compartments. With up to 10% less energy and water consumption. All for one goal: to impress as a cook with crispy crusts, delicious grill patterns, and crunchy coatings. Condition: New, original packaging, with 2 years manufacturer's warranty Technical data: Capacity: 6 longitudinal shelves for 1/1 GN accessories Removable standard hanging racks, 68 mm shelf spacing Dimensions: Casing: 850 x 754 x 775 mm Overall: 850 x 804 x 842 mm Minimum door opening dimensions for transport BxH: 800x800mm Weights: Max. loading capacity / shelf: 5 kg Max. total loading capacity: 30 kg Weight of the electric unit: 93 kg Connection conditions electric: Voltage: 3 NAC 400 V Connected load electric: 10.8 kW Power, steam operation: 9 kW Power, hot air: 10.25 kW Fuse rating: 16 A Connection conditions water: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Year of construction: 2026 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Iedpfjz Haqqjx Akpstn Do you have any questions, would you like a consultation, or would you like to see something on site? You can reach us during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ab0307002198, Autobag AB 180 OneStep – fully automatic bag packaging machine with thermal transfer printer Year of manufacture: 2007 | Location: 41564 Kaarst-Holzbüttgen Delivery and collection possible by arrangement. For sale is a used Autobag AB 180 OneStep (Automated Packaging Systems) – a proven, robust, and flexible bag packaging machine with an integrated thermal transfer printer. Isdpfx Aksz Spqxjpjtn Equipment: • STANDARD SEAL FLATTENER • STATIC BACK SHELF (NO SUPPORT) • AB180 ONESTEP 203 dpi PRINT KIT (Thermal transfer printer PI-412c) • FUNNEL SIZE A12 • BD100 (Orange Loop / Bag De-aerator) Also included in the scope of delivery: 1 box with 13 film rolls (Autobag chain bags) Mode of operation (manufacturer's description): The AB 180 OneStep feeds an Autobag chain bag unwound from a roll through the printer, opens it by means of compressed air, and prepares it for filling. The products are placed manually or via feeding systems into the bag. Subsequently, the bag is sealed using a foot switch or automatically. The integrated thermal transfer printer eliminates the need for offline labeling – printing and packaging are carried out in one step (“Print-n-Pack” / Next-Bag-Out technology). Ideal for fulfillment, mail order, spare parts, small and medium-sized series with frequent product changes. Technical data (according to the product data sheet): • Weight: 142 kg • Dimensions: approx. L 1,700 × W 850 × H 1,150 mm • Electrical: 110/220 V, 50/60 Hz switchable • Compressed air: 150 l/min at 5.5 bar (dry, clean air) • Passage: up to 108 mm • Bag thickness: 35–100 µm • Bag sizes: width 50–270 mm | length 140–630 mm • Performance: up to approx. 30 bags/minute (with printing) We will gladly send you the product data sheet and other documents upon request. If you are interested, I look forward to hearing from you – I will be happy to prepare an individual offer for you, including shipping costs.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm Itedpfx Aowld Upokpen 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: used, - Ideal assessment of the filterability and the quality of the filtrate - Longer total service life of the membrane filter cartridges through pre-filtration and targeted determination of the regeneration intervals - Reduction of downtime during filling due to perfect pre-filtration - Enables optimum choice of cartridge filter systems due to pilot tests - Polluting load analysis of service media (rinse water, steam condensate) - Easy handling and cleaning of the device - Variable filtration pressure - High flexibility due to a separate container for liquid to be filtered - Display of all measured data from archive - Ethernet interface for data download SPECIFICATIONS: Ijdpfoz Sdpwsx Akpetn Max. volume: 1.43 gal (5.4 l) Operating pressure: 0 – 43.5 psi (0 – 300 kPa, 0 – 3 bar) Membrane diameter: 1.85 in (47 mm) Membrane, pore size: 0.45 µm; 0.65 µm Max. temperature of medium: 176 °F (80 °C) Max. ambient temperature: 33.8 – 122 °F (1 – 50 °C) Weight: 37.5 lb (17 kg) Dimensions (L x W x H): M Measuring device: 13.8 x 11.8 x 17.7 in (350 x 300 x 450 mm) Container: Ø 7.9 in, height: 13.8 in (Ø 200 mm, H: 350 mm) Display: Micro-Panel 3,5" Color-Touch-Display

Condition: used, Year of construction: 2021, 2021 | Demarec DCC-30-C | Used Hydraulic Shear 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: A nice concrete crushing shear for 20-35 ton excavators. Jaw opening is 1,150mm. It has an Oilquick OQ80 quickcoupler. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41126 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Itodpfx Akszlrqvopen ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, Equipment: documentation/manual, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm 10. Bag type: wicketed bags on rolls Base machine: €12,500 Itedpexlzr Aefx Akpjn + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. Itodpfjzryy Eox Akpon One cylinder without a pressure shoe. Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm - Press cylinders: 6

Condition: good (used), Year of construction: 2008, machine/vehicle number: B0508A0131, functionality: fully functional, TRU BEND 5230 – CNC Press Brake – 230 t – 4,260 mm – Year of Construction 2008 For sale is a TRUMPF TruBend 5230 CNC press brake from the year 2008. The machine has a pressing force of 230 tons, a bending length of 4,260 mm, and extensive equipment for precise and economical bending operations. Technical Data Feature | Description Manufacturer | TRUMPF Model | TruBend 5230 Year of Construction | 2008 Machine Number | B 0508 A 0131 Pressing Force | 2,300 kN / 230 t Bending Length | 4,260 mm Installation Height | 615 mm CNC Control | TASC 6000 Axes | 6 axes New Price | approx. €225,000 Equipment and Accessories - CNC control TASC 6000 - 6-axis back gauge system Ijdpfsz S Nxcsx Akpotn - Standard safety devices - Cabinet air conditioning - Hydraulic upper tool clamping - CNC crowning - 2-arm bending aid (new price approx. €28,000) - TRUMPF BendGuard safety system - TRUMPF bending software TruTops Bend with TruTops CAD - Preparation for ACB (automatic angle measurement) - Optical setup and positioning aid - TRUMPF machine documentation Description The TRUMPF TruBend 5230 is a powerful CNC press brake for demanding bending operations in sheet metal processing. Thanks to the 6-axis back gauge control, the hydraulic upper tool clamping, and the CNC crowning, the machine offers high flexibility and precision. The integrated 2-arm bending aid supports the processing of large and heavy sheet metal parts. The machine is ideal for industrial sheet metal processing, steel construction, and contract manufacturing. For sale due to business closure.

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey-black, overall weight: 2,500 kg, maximum load weight: 3,000 kg, empty load weight: 3,000 kg, loading space width: 3,000 mm, loading space length: 7,000 mm, loading space height: 2,800 mm, machine/vehicle number: Wohncontainer PRESTIA, Equipment: bathroom, cooling unit, hot water, shower, WOHN – Model PRESTIA Living comfort at the highest level | 300 × 700 cm Experience a new generation of living containers – designed with the clear goal of not feeling like a container, but like a real home. Our ready-to-deliver models can be viewed on-site and represent the highest quality, modern design, and maximum flexibility. This model combines sophisticated engineering with residential aesthetics – creating a lifestyle usually found only in traditional homes. A real home feeling – not a container Thanks to fully integrated concealed installations, multi-layer wall structures, and large floor-to-ceiling windows, the space feels bright, open, and premium. ⸻ Technical Details Dimensions: • Length: 700 cm • Width: 300 cm • Height: 280 cm • Weight: 2450 kg ⸻ Insulation & Construction • Facade cladding with elegant wood-look slats • Ceiling/Walls: 10 cm insulation (5 cm PUR + 5 cm rock wool) • Reinforced and robust base frame • 2 mm thick galvanized steel sheet • High-quality insulated glazing • Floor structure: 16 mm fiber cement board + parquet ⸻ Wall Structure & Workmanship – invisible quality Living Area: • Solid box profile substructure • 5 cm rock wool insulation within the profiles • Covered with high-quality white plasterboard • Finished with wallpaper ⸻ Sanitary Area (WC & Shower): • Robust box profile structure • Full rock wool insulation • Moisture-resistant green plasterboard • Waterproof PVC wall panels with marble look This construction ensures maximum protection against moisture while offering a luxurious appearance far beyond standard container solutions. ⸻ Equipment – thoughtfully designed Living Space: • Double glass door • Floor-to-ceiling window • Fixed floor-to-ceiling window Creates a bright and inviting atmosphere. Kitchen: • Real wood countertop • Two-burner cooktop ⸻ Bathroom – redefining luxury • WC with concealed cistern • Tempered glass shower cabin • Washbasin with cabinets • Marble-look PVC wall covering Additional: • WC window • Instant water heater ⸻ Quality & Design • High-quality REHAU window systems • LED outdoor lighting • Color: RAL 7016 + wood-look facade Ijdpfezpfcgox Akpotn ⸻ Conclusion More than a container – a complete living concept. A place that makes you feel: This is my home.

Condition: good (used), fuel type: diesel, lifting height: 25,000 mm, General information Year of manufacture: 2016 Year of construction: 2016 Operating hours: 7.136 Weights Empty weight: 14.600 kg Carrying capacity: 4.000 kg GVW: 18.600 kg Functional Lifting capacity: 4.000 kg CE mark: yes Condition Technical condition: good Visual appearance: very good Itsdpfx Akez I I Uajpjn Manitou MRT 2540+ | Year 2016 | 7,136 hours | Radio Remote Control | Forks Powerful Manitou MRT 2540+ from 2016, with 7,136 operating hours, equipped with forks and radio remote control. A versatile rotating telehandler with a lifting height of approximately 25 metres and a maximum lifting capacity of 4,000 kg. The MRT 2540+ is designed for demanding and versatile applications, combining excellent reach with the flexibility of a rotating telehandler. Thanks to its 360° continuous rotation, materials can be lifted and positioned without constantly repositioning the entire machine. The radio remote control allows the machine to be operated remotely, providing additional flexibility for various applications. Together with the forks, the machine is ready for lifting and moving materials. With its impressive lifting height and lifting capacity, this MRT 2540+ is ideally suited for construction, assembly, industrial applications and material handling. Specifications: Make/type: Manitou MRT 2540+ Year: 2016 Hours: 7,136 Rotating telehandler Lifting height: approx. 25 metres Lifting capacity: 4,000 kg 360° continuous rotation Radio remote control Forks 4 hydraulic stabilisers Suitable for construction, industry, assembly and material handling A powerful Manitou MRT 2540+ with 7,136 hours, equipped with forks and radio remote control. The combination of 25-metre lifting height, 4-tonne capacity and 360° rotation makes this a highly versatile machine. Call us directly for more information or to arrange a viewing!