Used Flex for sale (647)

Condition: good (used), Year of construction: 2018, machine/vehicle number: AB00004121, functionality: fully functional, operating hours: 5,581 h, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 65 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 1,900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 95 mm, workpiece weight (max.): 50 kg, number of axes: 6, number of slots in tool magazine: 6, controller manufacturer: NUM, actuation type: pneumatic, total height: 2,450 mm, total length: 4,680 mm, total width: 2,225 mm, overall weight: 2,343 kg, table length: 1,350 mm, Equipment: CE marking, documentation/manual, We are offering this well-maintained Morbidelli CX200 vertical woodworking centre, year of manufacture 2018. Manufacturer: Morbidelli Model: CX200 Year of manufacture: 2018 Condition: good Category ID: 2502 Ksdpfxoy E N E Ho Akpjdu Type ID: 4257 Machine type: Vertical woodworking centre If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, mileage: 262,000 km, power: 177 kW (240.65 HP), first registration: 04/2008, fuel type: diesel, overall weight: 11,900 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: black, gearing type: mechanical, emission class: euro4, Year of construction: 2008, Equipment: ABS, air conditioning, soot filter, Manufacturer Mercedes Model Atego 1224 4x2 Hvidtved Larsen Cityflex 204 Year 2008 Condition Good Serial Number WDB9702831L316627 Ref. nr. 678107 Reg. date: 16-04-2008 Last seen: 25-02-2026 Hk: 240 Km: 262000 Gearbox: Manual Kdjdpfx Akey Airnepju Eurotype: 4 + Particle filter Diesel tank: 1 Tank liter: 200 L Rear view camera: ? Air conditioning: ? Cabin type: Atego Radio: ? Disc brake: ? ABS: ? Tire Size: 235/75R17.5 - 245/75R17.5 Cover% left 30% - 60% Front suspension: Parable Suspension rear: Air Toolbox: ? Total weight: 11990 Kg Net weight: 6370 Kg Load capacity 5620 Kg Manufacturer: Hvidtved Larsen CityFlex 204 Tank capacity: 4000 L with stamp High pressure pump: Uraca P3-10 High pressure capacity: 127 l/min at 160 bar Vacuum pump: Wittig SLS 54 Vacuum capacity: 5.400 l/min Remote control: ?

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 193 kg, SEFA Duplex Pro V3 – Pneumatic Double Platen Heat Press – 2022 Pneumatic double platen / double workstation heat press SEFA Duplex Pro V3, manufactured in 2022, in excellent condition. Machine tested and cleaned, ready for immediate use. - Delivery no included Ideal for any professional textile marking workshop requiring high throughput and reliable performance. TECHNICAL SPECIFICATIONS - Brand: SEFA - Model: Duplex Pro V3 - Year: 2022 - Type: Pneumatic double platen heat press with lateral swing - Platen size: 40 × 50 cm (16 × 20 in) - Maximum pressure: 625 g/cm² - Maximum temperature: 220 °C - Power: 2,200 W - Power supply: 240 V single-phase - Maximum substrate thickness: 45 mm - Weight: 170 kg - Dimensions: 713 × 891 × 1,079 mm - 3 pressing modes: single platen / semi-automatic / full automatic - Independent pressing time per platen - 10 storable time/temperature programmes - Foot pedal control included as standard - Automatic head translation - ECO mode, standby mode, dual piece counter - Designed and manufactured in France APPLICATIONS Textile sublimation and rigid substrates, heat-seal flex Kdedpfx Asyvh Rcjkpju and flock, screen-print transfer, laser transfer, DTF on garments and accessories, DTG pre-treatment drying. CONDITION Tested, cleaned, excellent overall condition. Available immediately. Sold by Manutech-Print, professional reseller of textile printing equipment. Contact: manutech-print.com

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally elastic coupling -Manufacturer: Desch, Hadeflex torsionally flexible jaw coupling Kjdezbq Sxjpfx Akpjdu -Type: FW9 -Hole shaft: Ø 32 mm -Dimensions: Ø 250 x 220 mm -Weight: 36.3 kg

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Kedpfx Akjzghngopodu Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: used, The Treif Flexon is a professional industrial dicing machine designed for meat processors, food production facilities, and manufacturers of prepared food products. Equipped with a computer-controlled hydraulic system and variable cutting speed, it delivers precise and consistent cutting performance across a wide range of food products. The machine is constructed entirely from stainless steel, ensuring durability, easy cleaning, and excellent hygiene standards. Its quick-change cutting system allows operators to replace cutting sets without tools, minimizing downtime and improving productivity. Technical Specifications: Manufacturer: Treif Model: Flexon Type: Industrial Dicing Machine Construction Material: Stainless Steel Control System: Computer-Controlled Hydraulic System Cutting Chamber Dimensions: 96 x 96 mm Chamber Length: 550 mm Cutting Speed: 100 – 300 rpm Processing Capacity: Up to 1400 kg/h (theoretical, 32 mm cube size) Knife Change System: Tool-Free Quick Change (Click & Go System) Kdsdpfx Aozgl Ikskpeu Product Pre-Compression System: Yes Product Feed Mode: Pulse or Continuous Feed Application: Meat, cured products, cheese, and various food products

Condition: used, The Treif Flexon is a professional industrial dicing machine designed for meat processors, food production facilities, and manufacturers of prepared food products. Equipped with a computer-controlled hydraulic system and variable cutting speed, it delivers precise and consistent cutting performance across a wide range of food products. The machine is constructed entirely from stainless steel, ensuring durability, easy cleaning, and excellent hygiene standards. Its quick-change cutting system allows operators to replace cutting sets without tools, minimizing downtime and improving productivity. Technical Specifications: Manufacturer: Treif Model: Flexon Type: Industrial Dicing Machine Construction Material: Stainless Steel Control System: Computer-Controlled Hydraulic System Cutting Chamber Dimensions: 96 x 96 mm Chamber Length: 550 mm Cutting Speed: 100 – 300 rpm Kdedpfxszgm Tns Akpou Processing Capacity: Up to 1400 kg/h (theoretical, 32 mm cube size) Knife Change System: Tool-Free Quick Change (Click & Go System) Product Pre-Compression System: Yes Product Feed Mode: Pulse or Continuous Feed Application: Meat, cured products, cheese, and various food products

Condition: used, Year of construction: 2002, Machine type: Flexographic printing press Web width: 520 mm Number of colors: 8 Kodpoyn Sclsfx Akpedu Equipment & Configuration: • 7 UV LED units + 1 UV unit • 5 sets of sleeves • 5 magnetic cylinders • 12 anilox rollers • Cold foil unit – 1 • Turning bar – 1 • 2 die-cut stations • Double-shaft rewinder

Year of construction: 2026, condition: new, The FleXlabeller is the fastest semi-automatic bottle labeller for factories, small producers and users of handcrafted products! With the FleXlabeller PE-ET, you can apply labels to almost all types of cylindrical products, such as various wine and champagne bottles, brandy and beer bottles, cans and pickles, at lightning speed! It is designed to handle almost any cylindrical product from 50 mm to 120 mm. Dimensions: Width: 38 cm Length: 65 cm Height: 65 cm Weight: 23 kg Operation: electric Capacity: 10-20 products/min Label features: Ksdpfxofkq Dmo Akpjdu Label winding: external (out) Minimum tape width: 20 mm Max. tape width: 165 mm Min. label length: 20 mm Max. label length: 200 mm Inside diameter of reel: 76 mm Max. outer diameter of label roll: 250 mm Cylindrical form reception: Yes Min. cylinder diameter: 50 mm Max. cylinder diameter: 120 mm Reception of square shapes: No Extension options: Manual label numbering Automatic label sorter Automatic label applicator Automatic label applicator Automatic label applicator Automatic label applicator Key features: Recommended for products with a bottle diameter of 50-120 mm The fastest semi-automatic labeller, motorised/sensorised operation Helps labelling of small to medium volume cylindrical products Enables positioned and accurate application of roll labels Extremely easy to use and set-up Optional manual or automatic label sorter.

Condition: used, Year of construction: 2012, Used machine Kdsdpfez Rrbqox Akpeu Nesting cell Year of construction: 2012 Gantry machine in Gnatry design Working area in X = 4300 mm Working area in Y = 2250 mm Working area in Z = 125 mm Travel speed X - Y - Z-axis 100 - 100 - 20 m/min with grid table and sacrificial plate with 3 vacuum pumps, each with 300 m³/h (one of them from 2026) Spindle motor 12 kW with torque support and C-axis with Homag Flex 5 tool interface Tool clamping system HSK-F 63 Tool changer with 14 tool positions Loading with vacuum lifter and roller conveyor Unloading with conveyor belt with manual label printer Safety device: stepping mat Caution! Drilling head is defective! Availability: approximately July 2027 Location: North Rhine-Westphalia

Condition: good (used), Year of construction: 2012, machine/vehicle number: 0-201-08-1944, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Automatic loading/unloading TBP 420/125/G is included. Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25mm) - max. 3470 mm with single workpiece placement Kdedpsz Szdqjfx Akpeu - max. 1700 mm with alternating workpiece placement Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm 2 individually movable console clamping tables - 4-position placement possible - 8 movable consoles (4 per table) with 1 stop each at the front - Console length 1490 mm - 4 lifting rails - Side stops, 4 x left, 4 x right (mirrored) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position rotary - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Pivoting saw/drilling unit - Saw unit D=1200 - FLEX5 saw, milling, drilling unit for multi-tool - 16 pcs. Suction cups 160x115 mm - 8 pcs. Suction cups 125x75 mm Control / Software: - PC85 operating system - WoodWop 5.1 - Wood Design Package - CAD Plugin - DXF import - Schuler MDE Available from week 49/2026.

Condition: ready for operation (used), A complete Winema CNC rotary transfer production line including interlinking, peripherals and a washing system is available. 1) Winema RV20 Flexmaster rotary transfer machining center, stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, holes: 8.7mm/15mm/17mm/18mm, reaming: 9mm/15mm/18mm, cycle time: approx. 7s, throughput capacity: approx. 500parts/h, control system: Siemens Sinumerik 840D. 2) Winema bar loading magazine, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Knoll Turbofilter coolant cleaning system, dirty tank volume: 500l, clean tank volume: 150l, filter fineness: 50mm. 4) Knoll cooling unit, cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system, separation efficiency: 96%-98%. 6) Interlinked continuous washing system with automatic parts transfer. 7) Hydraulic system. 8) Conveyor units. 9) Fire extinguishing system. This is a complete and interlinked system for NC control valve production. The production of additional components can presumably be set up. Documentation available. An on-site inspection is possible. Kodpfx Akszbl N Sjpedu

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Offer for flexo press UTECO ONYX 808 gearless, 8 colors, year 2014 and 1280 mm width. Fully equipped. Kdsdpfx Akexf T Hljpsu

Condition: ready for operation (used), Year of construction: 2007, A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible. Kodpfx Akezc Rfbopsdu

Condition: ready for operation (used), Year of construction: 2001, Number of colors: 8, max. mechanical machine speed: 460m/min, gear pitch: 10mm, print length: 300-1200mm, max. print width with endless sleeve technology: 1270mm, max. print width without endless sleeve technology: 1250mm, max. material width: 1320mm, max. unwind roll diameter: 1000mm, max. rewind roll diameter: 1000mm, sleeve inner diameter: 76mm, sleeve outer diameter: 85mm, max. roll weight: 1,24t, web tension ranges, unwinding without draw: 40-350N, unwinding with draw: 25-350N, rewinding without slitter: 25-450N, rewinding with slitter: 30-450N, draw: 25-450N, suitable materials: LDPE, PP, PA: 20-150µm, HDPE, OPP: 12-100µm, max. laminated films: 120µm, paper: 30-120g/m². Equipment: unwinder, rewinder, control panel, corona treatment, Turboclean ink supply system, numerous printing cylinders, anilox rollers and additional accessories, with documentation. An on-site inspection is possible. Ksdpfx Akszuktuopjdu

Condition: used, machine/vehicle number: 008563, X axis working area: 3000 mm Y axis working area: 1300 mm Main Electrospindle power: 4.5 KW Ksdpfxozruxve Akpsdu Number of controlled axes: 3 axes Total number of drilling spindles: 82

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Kdodpfx Aozvhkyekpsu

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Kedpfx Akjzxyfzopedu Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety feature: Photoelectric cell Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: used, Year of construction: 1984, The DERITEND ROTADIE 15 is a versatile and robust machine designed for high-quality flexographic printing. Manufactured in 1984, this machine remains in production and is located in Germany. It is equipped with a vacuum feeder and a vacuum dust cleaner to ensure efficient and clean operation. The ROTADIE 15 features four flexo-printing units, allowing for precise and detailed printing capabilities. It supports bottom printing and is enhanced with ceramic rolls and a chamber doctor blade for superior print quality. The machine also includes side track printing units, an electric running register for precise alignment, and an automatic stacker for efficient handling of printed materials. With a maximum sheet size of 1.700 x 1.150 mm and a minimum sheet size of 520 x 600 mm, the ROTADIE 15 can handle a wide range of printing jobs. Its impressive maximum speed of 9,000 sheets per hour makes it a reliable choice for high-volume printing tasks. Format: Max: 1.700 x 1.150 mm min: 520 x 600 mm Equipment: Vacuum Feeder Ksdpfsxizdmox Akpedu Vacuum Dust Cleaner No 4 Flexo-Printing Units Bottom Printing With Ceramic Rolls & Chamber Doctor Blade Side track printing Units Electric Running Register Automatic Stacker Max. Sheet Size 1.700 x 1.150 mm Min. Sheet Size 520 x 600 mm Max. Speed 9.000 Sheets per Hour

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Kdedpfxexy Iiks Akpeu Available immediately

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, load capacity: 10 kg, arm reach: 1,418 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, input voltage: 230 V, type of input current: AC, repeat accuracy: 0.05 mm, warranty duration: 6 months, Equipment: documentation/manual, Mobile automation cell GEWA "RoboFlex 10", consisting of: - FANUC CRX10iA - R-30iB Plus Controller - Tablet Teach Pendant - BASIC base frame incl. 5 grid positions - without gripper (optionally available) The cell is located with us in the Eifel region and can be inspected under power by appointment. OPTIONAL: Connection of RoboFlex to your machine tool - Configuration of automation interface - Installation and commissioning - Operator training (2h) Ksdpfxoxrknms Akpodu - Test run and handover to customer We are happy to provide you with an individual offer upon request.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 13,750 h, This ABB Roboter IRB 4400 was manufactured in 2009. It includes an IRC5 controller, a control panel, and a comprehensive set of documentation. Accessories feature an additional cable set and a Flex pendant. Ideal for automation tasks requiring precision and reliability. Contact us for more information about this machine. • IRC5 controller • Control panel • Cable set • Folder with documentation, circuit diagrams, etc. Additional equipment Kdjdpfx Akox Hblbjpju • Flex pendant

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Kodsxzrx Eopfx Akpjdu Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Condition: used, Year of construction: 2015, - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm CNC nesting machine Manufacturer: Homag Type: BMG511/60/12/R Year of manufacture: 2015 Technical data - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm Workpiece parameters: Length with single workpiece loading: 6,000 mm / with pendulum machining 1,550 - 3,200 mm Widths: Max. 1,550 mm with stop at the rear and milling diameter 25 mm Workpiece thickness 275 mm including clamping device Up to max. 60 mm with standard clamping device Speed Pack: Increase in the max. travel speed of the X-axis to 80 m/min. With tool transfer station, on the left side of the machine bed Rotary tool changer, 18 positions Option for 18 x 130 mm tool diameter or 9 x 180 + 9 x 70 mm. Aggregate length max. 320 mm Machining spindle 12 kW (12 kW in S6 operation, 9.5 kW in S1 operation) Frequency-controlled rotation 0 - 24,000 rpm. C-axis with aggregate interface Drive for all aggregates with pivoting axis, pivoting range without limitation. Interface for FLEX-5 aggregate Drilling head, 30 spindles: V20 / H10 / S360 MPU Multi-Processing Unit with C-axis +/- 185 for drilling and sawing operations at any angle. 20 vertical spindles in HIGH SPEED. Each drilling spindle with a quick-change system. Arrangement of spindles in a U-shape: 3 drilling rows with 11, 3 and 6 spindles, spindle spacing 32 mm Kjdpfxozux Tce Akpedu 10 horizontal drilling spindles. 4 drilling spindle pairs with a spacing of 32 mm 1 drilling spindle pair spacing 320 mm Grooving and cut-off saw for max. saw blade diameter 200 mm. Basic design, slatted table: Slatted table with grooved aluminum profile Dynamic workpiece positioning on R-table The machine automatically checks the maximum possible part dimension based on the program layout. The vacuum areas are permanently assigned to the machining areas. Machine control POWERCONTROL PC 86 POWERTOUCH with 21.5 Full-HD multi-touch display WoodWop for graphical, dialog-oriented creation of CNC programs. The machine is supplied via an on-site vacuum system. Without its own vacuum pump.

Condition: excellent (used), CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Author 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 912: mm 100 /1000 (o 500+500) 238400A) Loader (Bridge Frame) "MAHROS" single station, Mod. Runner 238400B) Connection transfer unit, with tilter (180°, up-side-down) "MAHROS" Mod. Rib 238400C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 912 - N.2 Vertical electro-spindles (on the Y-axis) for fittings - N.2 upper drilling units, each consisting of: - 2 vertical 36-spindle heads (72 in total per unit) - 1 vertical 14-spindle heads (on the Y-axis) for fittings Kdodpfx Aszx R Akokpeu - 2 horizontal spindles (4 in total per unit) on the Y-axis - N.2 heads with 3 vertical spindles (for hinges) - N.2 horizontal units (1 R + 1 L) with N.2 21-spindle heads (21 + 21 = total 42) per unit 238400D) Stacker (Bridge Frame) "MAHROS", single station Mod. Runner