Used Fit for sale (2,403)

Condition: excellent (used), Year of construction: 2007, total length: 6,060 mm, total width: 2,550 mm, total height: 2,670 mm, = Additional options and accessories = - ADR = Notes = Welfit Oddyl 20FT ITankcontainer 25,000L/1-compartment UN Portable T-11 L4BH steam-heated bottom discharge 5Y + CSC test: 02-2028 = Further information = General information Year of manufacture: Feb. 2007 Model year: 2007 Weights Unladen weight: 3,650 kg Payload: 32,350 kg GVW: 36,000 kg Functional Dcsdpfxjy Dpy Io Am Rjh Load compartment volume: 25,064 l Superstructure brand: Welfit Oddy TC 25.070L Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for further information.

Condition: excellent (used), Year of construction: 2008, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2008 WELFIT ODDY 20FT ISO tank container 24,890L / 1-compartment with 3 baffles (partial loading possible) / 4 lids UN PORTABLE, T12 steam heating bottom discharge Payload: 32,200kg Design temperature: -40/+130 degrees SANS 50028-7: 1.4402 valid for 5 years + CSC inspection until 11-2028 = Further information = General information Year of manufacture: April 2008 Model year: 2008 Usable material: Chemicals Weights Empty weight: 3,800 kg Payload: 32,200 kg GVW: 36,000 kg Functional Load compartment volume: 25,000 l Body brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of compartments: 1 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for further information. Dcedey Ur Ayjpfx Am Roh

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy 20FT ISO Tank Container 23,950L / 1 compartment IMO-1 Bottom discharge Steam heating DIN 17440 1.4401 22T6 2.5Y-+ CSC inspection valid until 09-2028 Dodpfx Amey Sxg Hs Roch = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable materials: Chemicals, construction water, fuel, wastewater Weights Tare weight: 3,840 kg Payload: 30,160 kg Gross weight: 34,000 kg Functional Cargo compartment volume: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 comp. (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: used, maximum load weight: 2,860 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 12/2022, total width: 2,320 mm, Year of construction: 2022, The new ALGEMA FIT-ZEL® EURO-TRANS is the innovative trailer for professional car transport. Dcsdpfxezamuyj Am Rjh Fitzel Algema Eder Euro-Trans 35-22/53X tarpaulin trailer, pendulum axle, 100 km/h approval, single owner, used twice, no signs of wear, as new condition. Gross weight 3,500 kg, Tare weight approx. 640 kg (including special equipment), payload 2,860 kg X-Line pendulum axles for 100 km/h approval Lift axle preparation Tyres: 195/50 R13C 104N M+S on alloy rims Loading dimensions: 5,300 x 2,180 mm, loading height 660 mm Overall dimensions: 6,620 x 2,220 mm, approach angle approx. 7.5° Standard equipment: • Pendulum axles with 100% load compensation • ALU loading platform, easily tiltable due to center-of-gravity shift with descent and tilt damper • 2 extractable and infinitely laterally adjustable ALU loading ramps, centrally lockable, operable from both sides, lockable • 2 rubber buffers per loading ramp for safe locking when retracted • Lashing straps, attachable on both sides at over 50 lashing points, for legally required load securing • 1 certified load securing according to TÜV certificate no. LS1206430Z1 • 1x 13-pin plug connection cable, 1 metre long, 12 volts • 8 large rear lights incl. 2 reverse lights and 2 rear fog lights • 2 rear outline marker lights, 4 orange side marker lights and 2 white front position lights - for your safety • 1 heavy-duty jockey wheel Ø 60 mm with safety chain • 1 maneuvering support wheel at the front allows for easy single-axle maneuvering with rubber-sprung axle • Reflective side stripes for your safety - F-band • 2 rear rolling supports • 2 driving tracks (550 mm wide, roughened) for safe, slip-free loading • 1 pre-tensioned platform • 1 automatic locking system • Bolted, anodized chassis • Shock absorbers required for 100 km/h approval Included special equipment: • Aluminum floor plate • High tarpaulin 5.30 x 2.30 x 2.00 m (internal loading dimensions LxWxH) - Complete aluminum frame with 2 support wheels, rollable as a unit - Front chamfered 600 x 600 mm - Incl. truck-grade tarpaulin, color black - Roll-up by hand on all 4 sides - Auxiliary loading mirror fitted front left - Winch clamp holder at the front right of the tarpaulin frame (tarpaulin height customizable) • Tarpaulin color: RAL black • High rear tailgate for tarpaulin • Right-hand side flap • Sliding curtain left and right Empty weight incl. special equipment only approx. 640 kg = 2,860 kg payload! - New list price according to equipment: €31,050 net plus €190 COC paper/document - Despite our best efforts, errors within the advertisement cannot be excluded. Subject to errors and prior sale!

Condition: used, maximum load weight: 2,872 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 11/2023, Year of construction: 2023, The new ALGEMA FIT-ZEL® EURO-TRANS is the innovative trailer for professional vehicle transport. ALGEMA FITZEL Euro-Trans 35-22/48X, fully equipped: lift axle, pendulum axle, electric winch, 100 km/h road approval, one previous owner, used twice, no signs of use, as new condition. Gross weight: 3,500 kg Unladen weight: 628 kg X-Line pendulum axles with 100 km/h approval 1 lift axle 1 electric winch with cable remote control, optionally upgradable to radio remote control Tires: 195/50 R13C 104N M+S on alloy wheels Loading dimensions: 4,850 x 2,222 mm, loading height 660 mm Overall dimensions: 6,520 x 2,222 mm, approach angle approx. 7.5° Standard equipment: • Pendulum axles with 100% load compensation • ALU loading platform, easily tiltable by shifting the center of gravity, with lowering and tilt damper • 2 extendable and infinitely laterally adjustable ALU loading ramps, with central locking, operable and lockable from both sides • 2 rubber buffers per loading ramp for secure locking when retracted • 1 adjustable ALU wheel chock bracket • Over 50 lashing points attachable on both sides for mandatory load securing • 1 certified load securing system according to TÜV certificate no. LS1206430Z1 • 2 x 13-pin cable connections, 1 m length, 12 Volt • 8 large rear lights including 2 reversing lights and 2 rear fog lamps • 2 rear marker lights, 4 amber side marker lights and 2 white front position lights for your safety • 1 heavy-duty jockey wheel Ø 60 mm with safety chain • 1 maneuvering support roller at the front allows easy single-axle maneuvering with rubber spring axle • Reflective side stripes (F-band) for your safety • 2 rear support rollers • 2 driving surfaces, 550 mm wide and ribbed for safe non-slip loading • 1 pre-tensioned platform • 1 automatic locking system • Bolted, anodized chassis • Shock absorbers for 100 km/h approval Special equipment: • Aluminum floor plate • Lift axle with automatic lowering when platform is unlocked • Hydraulic tilting mechanism • Electric winch with cable remote control, optionally with wireless remote control Dcsdpfezamrrex Am Roh • Synthetic rope for winch • Remote control for electric winch • Power/battery supply for electric winch • Toolbox left and right • Side marker lighting • Anti-sway coupling • Theft protection lock - List price: €27,280 net plus €190 for COC documents - Although every effort is made to ensure accuracy, errors in the listing cannot be excluded. Subject to errors and prior sale!

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m Dcedpfx Asxcblwom Reh

Condition: good (used), Year of construction: 2001, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Welfit Oddy 20FT Tank Container Swap Body Capacity: 31,050L / 1 compartment Type: IMO-1, T7 Code: L4BN Bottom discharge Steam heating Insulated Payload: 32,020kg Dcedpjyyxapjfx Am Rsh Design temperature: +130°C 5Y/CSC inspection valid until 08/2027 = Further Information = General Information Year of manufacture: May 2001 Model year: 2001 Weights Tare weight: 3,980 kg Payload: 32,019 kg Gross weight: 36,000 kg Functionality Internal volume: 30,850 l Body brand: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: good Visual condition: good Additional Information Please contact Arne Honingh for more details.

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Dcjdpfx Amozac Sbo Reh

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Dcodsdyl H Nepfx Am Roh Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Linear speed: 300mm / s Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION Dodpfx Amjywcr Dj Roch used visually in good condition

Condition: excellent (used), -Dough capacity: 250 kg -Flour capacity: 150 kg -Bowl capacity: 320 L -Model: scsx banco 250 -Discharge table and divider -Discharge on the left -2 speeds -2 timers Dsdpfowxvlgox Am Roch -Voltage: 380V -Power: 9 kW

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors of the Mahr Mahr multisensor coordinate measuring coordinate measuring machines. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm weight: approx. 1.200 kg max. workpiece weight: on glass plate approx. 40 kg Accuracies: U1=1,9 + L/200 U2=2,4 + L/150 U3=2,9 + L/100 (L= measuring length in mm) increased accuracy on request traversing speed: 200 mm/s acceleration: 400 mm/s scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser -incl. high-precision USB camera with 2-stage zoom with telecentric beam path -incl. PTL01 TTL point laser, highly accurate, telecentrically coupled in -incl. Renishaw TP200 integrated tactile probe system, optionally extendable -incl. Quad-Light LED Power Ringlight, programmable incident light Dedpfx Ajg Ewk Rsm Rech -incl. LED power transmitted light -incl. Nikon precision lens 5x (optional 3x, 10x, 20x, 50x) C-Mount Technology -incl. calibration standard with factory calibration certificate, consisting of glass plate "circle", calibration sphere and ring gauge Transfer -State-of-the-art PT200 CNC controller system in a solid, industry-standard control cabinet -PCI-BUS system for fast internal data transfer in real-time operation -Extendable 19" controller rack for optimum access in case of servicing -modular controller concept open for later upgrades and retrofits -service-optimized controller design fast access and service times -Integrated 64-bit broadband bus technology with Ech [...]

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Dsdpfx Aedyah Sjm Roch Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: excellent (used), Year of construction: 2007, total length: 6,060 mm, total width: 2,550 mm, total height: 2,670 mm, = Further options and accessories = - ADR = Notes = Welfit Oddy 20FT ISO tank container 25,050 L / 1-compartment UN Portable T-11 L4BH Steam heating Bottom discharge 5Y + CSC test: 09-2028 Dsdpfxey Dcv No Am Rjch = Further information = General information Year of manufacture: June 2007 Model year: 2007 Weights Empty weight: 3,650 kg Payload: 32,350 kg Gross vehicle weight: 36,000 kg Functional Loading capacity: 25,064 l Body manufacturer: Welfit Oddy TC 25,070L Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further information Contact Arne Honingh for more information.

Condition: good (used), Year of construction: 2007, total length: 6,060 mm, total width: 2,550 mm, total height: 2,670 mm, = Additional options and accessories = - ADR = Notes = Welfit Oddyl 20FT ISOTankcontainer 24,870L/1-compartment UN Portable T-11 L4BH Dcjdpfxjy A Skto Am Rjh steam-heating bottom discharge 2.5Y + CSC test: 02-2027 = Further information = General Information Year of manufacture: June 2007 Model year: 2007 Weights Unladen weight: 3,650 kg Payload: 32,350 kg Gross weight: 36,000 kg Functionality Cargo space capacity: 25,064 l Superstructure brand: Welfit Oddy TC 25.070L Number of compartments: 1 Condition Technical condition: good Visual condition: good Further information Contact Arne Honingh for more information.

Condition: excellent (used), Year of construction: 2009, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2009 Welfit Oddy ISO 20FT Tank Container 24,970L / 1-compartment. UN PORTABLE T11 22K2 Bottom Discharge Steam Heating 5-year + CSC inspection valid until 09-2027 = Additional Information = General Information Year of manufacture: Sept. 2009 Model year: 2009 Suitable for: Chemicals, construction water, fuel, wastewater and effluent Weights Unladen weight: 3,540 kg Payload: 32,460 kg Gross weight: 36,000 kg Functional Cargo volume: 24,690 l Body make: Van Hool 24,690L TC, 2 compartments (12,290L / 12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Dcedpfxjy Amzas Am Roh

Condition: good (used), Year of construction: 2007, total length: 6,060 mm, total width: 2,550 mm, total height: 2,670 mm, = Additional options and equipment = - ADR = Remarks = Welfit Oddyl 20FT ISOTank container 25,030L/1-compartment UN Portable T-11 L4BH steam heating bottom discharge 2.5Y + CSC test: 06-2026 = Further information = General information Year of manufacture: June 2007 Model year: 2007 Weights Tare weight: 3,650 kg Payload: 32,350 kg gross vehicle weight: 36,000 kg Functional Cargo space capacity: 25,064 l Body make: Welfit Oddy TC 25.070L Number of compartments: 1 Condition Technical condition: good Visual condition: good Dodsyzfvajpfx Am Rech Further information Please contact Arne Honingh for more information.

Condition: good (used), Fitzpatrick L1A Fitzmill 2006, stainless, duel sided knives, 150mm rounded cutting chamber, for wet and dry produce, two boxes of spare parts, mounted on mobile frame Dcsdpfxsrxdp Ns Am Reh

Condition: good (used), Year of construction: 2008, functionality: fully functional, tank capacity: 24,000 l, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, overall weight: 36,000 kg, wall material: stainless steel, number of chambers: 1, manhole diameter: 500 mm, operating temperature: 150 °C, operating pressure: 4 bar, pressure (max.): 6 bar, Tank container made of V4A stainless steel with a top manhole (access opening) with a diameter of 50 cm. Bottom outlet 3 inch BSP, which corresponds to 7.5 cm. Top walkways. The tank is insulated, cleaned, and leak-proof on all sides (pressure-tested). Location: Rotterdam. Transport quote available on request. All information provided without guarantee; subject to errors and prior sale. Dcjdpfxeywd Tvj Am Rsh

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 750 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg (between centres) – 250 kg (supported between centres) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, stepless speed adjustment 30–450 rpm, swivel range 0–90° Tailstock: MT 4, quill stroke 45 mm, quill offset adjustment Quill force: 200–600 N manual, (up to 2500 N adjustable as option) Table swivel adjustment: 12.5 degrees Cross slide travel: 80 mm Rapid traverse distance: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW optional) Stepless speed setting of the grinding wheel via potentiometer Internal grinding spindle motor: 2.2 kW Dcedpfx Asiv Audjm Rsh Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Machine weight: Net 3,500 kg Feed drive via DC motor Air-cushioned rapid adjustment of the grinding spindle head for fast and precise positioning. Separate drive for external and internal grinding spindles. Fully automatic operation, feed movement controlled via handwheel switch: rapid feed, rapid return, grinding operation, feed stop, mym-feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding zones Workpiece headstock with steplessly adjustable drive, with live and lockable spindle. Digital feed control with Siemens panel and Siemens PLC for plunge and traverse grinding, input for retraction, infeed values, feed rates, spark-out times, idle strokes, compatible with traditional Karstens infeed control, with colour Siemens touch panel. Scale in X and Z axis by HEIDENHAIN. Comparable with Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna.

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 1100 mm Centre height: 180 mm (250 mm optional) Workpiece weight: 100 kg between centres (unsupported), 300 kg between centres Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed control 30–450 rpm, swivelling range 0–90° Dodpfxsiv Au Ej Am Rjch Tailstock: MT4, quill stroke 45 mm Quill force: 200–600 N manually, (up to 2500 N adjustable, option) Table swivel: 10° Cross slide travel: 80 mm Rapid traverse: 50 mm Coarse adjustment (air cushion): 280 mm External grinding spindle motor: 4 kW (5.5 kW optional) Infinitely variable grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net machine weight: 3,800 kg Infeed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head for fast and safe positioning to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operation, infeed movements controlled via rotary selector switch: rapid advance, rapid return, grinding mode, infeed stop, micrometre infeed. Automatic longitudinal grinding cycle Central coolant supply to all grinding points Workpiece headstock with infinitely variable drive for rotating and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for traverse and plunge grinding; input for retraction, infeed amounts, feed rates, spark-out times, idle strokes; compatible with the original Karstens infeed control; with coloured Siemens touchscreen; HEIDENHAIN scales in X and Z axes. Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Centre distance: 1100 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg between centres, 300 kg with support Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed from 30-450 rpm, swivel range 0 - 90° Tailstock: MT4, quill stroke 45 mm Quill force: 200-600 N manual, (up to 2500 N adjustable = optional) Table swivel: 10 degrees Infeed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW = option) Infinitely variable speed adjustment of grinding wheel via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net machine weight: 3800 kg Infeed drive via DC motor Air cushion-supported rapid adjustable grinding spindle stock for fast and safe positioning to grinding location. Separate drive for spindles for external and internal grinding. Fully automatic operating sequence, infeed movement via rotary dial switch: Rapid approach, rapid return, grinding operation, infeed stop, mym-infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding zones Workpiece headstock with infinitely variable drive for both live and lockable spindle operation. Dsdpfx Ash Rimmom Roch New digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, inputs for retraction, infeed amounts, feed rates, spark-out times, dwell strokes; compatible with the old Karstens infeed control; with colour Siemens touch panel. Similar to Weiss/ EMAG/ GP cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller / Fortuna

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, Deckel FP1 FPS retrofitted tool milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a training department. Adjustable tilting table, SK 40 spindle taper. Accessories include various collets and arbor holders. In good, ready-to-use condition. Test run under power can be arranged by appointment. Dodpsy Dz T Tefx Am Rjch

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy ISO 20FT Tank Container 23,820L / 1-compartment IMO-1 Bottom discharge Steam heating 5-Year CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable for: Chemicals, construction water, fuel, wastewater, and effluent Weights Tare weight: 3,860 kg Payload: 30,140 kg Gross weight: 34,000 kg Functional Compartment volume: 24,690 l Dcjdpfjyu Iggsx Am Rjh Body make: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Further Information Please contact Arne Honingh for more details.

Condition: excellent (used), Variofit pallet collar, type 65, for Euro pallets, usable height 1200 mm, stackable up to 3 times. Multiple sets available. Dcodpfeylknnex Am Reh