Used Fishing Net for sale (9,169)

Condition: ready for operation (used), Year of construction: 2011, XYZ Proturn SLX425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Lsdjw Hb T Sspfx Amrsac Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78937 Machine Serial Number: L507 Cost: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Laodpfx Aoxt Ibyemrsc Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2018, Flame-cutting and drilling system Plate processing center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool changer Tool capacity: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transverse conveyor Laedpfx Amjvzrczorsc Number of carriages: 2 clamping jaws NC feed carriage, positioned to the side 4 clamping jaws (2+2) 3 short-stroke transverse conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with a lowerable discharge table with a slide into a material collection container for unloading small parts. Filter unit incl. piping Powerful for use with carbide tools. For drilling, threading, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and V-scoring LANTEK license 23626ä Availability: immediately!

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Crumbler HB KRU 6 Length and diameter of crumb roll: 1740 x Ø 250 mm Engine: 7.5 and 11 kW Ledjra Dn Sepfx Amrjac Weight: 2100kg

Condition: good (used), Year of construction: 2021, Koneteollisuus F19S Meat Slicer 2021, stainless, designed for cutting fresh and boneless meat into slices or strips, works well for slicing cooked or dried meats, liver, poultry, fish fillets as well as fruits and vegetables, up to 1500Kgs per hour, mobile, 1Ph Lajdeyzihgopfx Amrec

Condition: used, total width: 400 mm, total length: 600 mm, total height: 800 mm, Colour: Grey Empty weight: 45 kg - Documentation available: No - CE certificate present: No - Serial number: Op11.882 - Main motor power [kW]: 2.2 - Flow capacity [m³/h]: 1200 - Negative pressure [Pa]: 3 - Rotation speed [rpm]: 2840 - Connection diameter [mm]: 140 - Output diameter [mm]: 135 - Voltage [V]: 400 - Current consumption [A]: 4.61 - Fuse [A]: 16 - Power [kW]: 2.2 - Transport dimensions: 600mm x 400mm x 800mm (l x w x h) - Transport weight [kg]: 45kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lajdpow Tzadjfx Amrjc Yorick Diebels

Condition: excellent (used), For sale: Gaussmeter MAGSYS HGM09s from the renowned manufacturer MAGNET SYSTEME (MAGSYS) – a professional magnetic field meter designed for industrial, service, and laboratory applications. This device is used for precise measurement of magnetic induction (mT / mG) and is widely used in quality control, maintenance, diagnostics of magnetic separators, magnetic grippers, permanent magnets, as well as laboratory applications. — Technical condition • Fully functional equipment, powers on correctly • Clear display, responds to magnetic field • Normal signs of use • No information on current calibration (user calibration may be required if necessary) — Included in the set Lasdpfsydfvkjx Amrec • MAGSYS HGM09s gaussmeter • 2 MAGSYS magnetic probes • Complete cabling • USB memory stick • Original transport case • Exactly what you see in the photos — Main features • DC magnetic field measurement • Units: mT / mG • Functions: AUTO, HOLD, ZERO (NULL), manual/automatic ranges • Data logging and retrieval capabilities • Robust, industrial-grade construction • Suitable for B2B / laboratory applications — Applications • Maintenance • Industry and manufacturing • Quality control • Magnetic separators and systems • Laboratories and technical services

Condition: good (used), total width: 375 mm, total length: 430 mm, total height: 95 mm, 2 magnetic Tables and 1 controll unit  Electropermanent magnetic clamping system Clamping all kind off jobs such as; Face milling, lateral drilling, Round bar facing and slots drilling Coupled parts machining ans forged parts machining Edge milling and chamfering plates machining on right angle Flattening through drilling and pocket execution Lodpfewq Rutex Amrsac Seperate MCC Control box with quick connection Table Length: 430mm Table Width: 375mm Table Height: 95mm Number of poles:56 Length: 375mm Width: 430mm Height: 95mm Weight: 350kg

Condition: excellent (used), Year of construction: 2004, Total off 12 units available Lasdpfexxkhyex Amrsc

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Lasdpfx Amjzfi A Ajroc Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: new, functionality: fully functional, Sheet width: 2040 mm Laedpfxjzbbdfs Amroc Sheet thickness for structural steel: 4 mm Sheet thickness for stainless steel: 2 mm Total power: 7.5 kW Back gauge: 750 mm Machine weight approx.: 2600 kg Dimensions: 2810 x 2230 x 1360 mm Standard equipment: - All-steel sheet metal welded construction with static and dynamic frame rigidity - Direct drive with braking motor - specially alloyed cutting blades - 750 mm motorized, digitally adjustable back gauge with ball screw spindles - manual blade gap adjustment system - mechanical sheet metal clamping system with plastic support - work table with insert plates - foot switch for single and repeat cut cycles - 1 x squaring arm with a length of 1000 mm and a metric scale - 2 x material support arms at the front, 800 mm - front gauge - finger guard - front and rear guards - rear light protection devices - CE declaration of conformity

Condition: used, length / mm Lsdpfx Aey Suzmjmrsac width / mm height / mm weight / kg

Condition: used, functionality: fully functional, color: yellow, empty load weight: 2,720 kg, Year of construction: 2018, Beach cleaning trailer: Lasdpewu Tnwofx Amrec + ETAPNET + Model: Matador + Year of manufacture: 2018 + Working width: 230cm + Working depth: 0-25cm + Surface performance: 27,600 m² / hour + Required tractor power: 95HP + 175HP; PTO shaft: 540 rpm + 2.5m³ collection container + Discharge height: 250cm + 3x rotating vibrators under the mesh + 540cm x 232cm x 216cm (LxWxH) + Unladen weight: 2,720kg + Municipal equipment from first owner Receive all new vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted; subject to prior sale!

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 1524 x 596 x 584mm, Table 1930 x 356mm, Spindle speed 5000rpm, Motor 5.75kW, ProtoTRAK SMX 3 axis control, Lodpfsyynvyex Amroac ISO40 Spindle taper, 127mm Quill Travel, Interlocked guards, Power Drawbar, low Volt light.

Condition: good (used), Year of construction: 2019, 400mm swing, 220mm max turning diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Laodpjyyaq Njfx Amrsc Spindle Speed 4500rpm, 3 jaw chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor,

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 780 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: 0iMF, table load: 700 kg, overall weight: 6,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, tool weight: 6,000 g, number of axes: 4, This 4-axis Finetech SMV 1060 H3L was manufactured in 2024. It features an impressive X-axis travel of 780 mm, Y-axis travel of 600 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1100 x 600 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Finetech SMV 1060 H3L vertical machining centre. Contact us for further details. Lajdpoy Tlpwsfx Amrjc • Structure: Cast iron structure; roller linear guideways • Control: FANUC 0iMF; 10.5" monitor; remote electronic handwheel • Table: 1100 x 600 mm; 5 T-slots; T-slot size 18 mm; T-slot pitch 100 mm • Distances: Spindle nose to table 130–780 mm • Spindle: taper No. 40 • Tool changer (ATC): Tool holder taper ISO40 DIN69871; 24-position magazine; max tool Ø 80 mm; max tool length 300 mm; bidirectional selection; tool-to-tool 3 s; chip-to-chip 6 s • Feedrates: Rapids X/Y/Z 36/36/32 m/min; working feedrate X/Y/Z 1–12,000 mm/min • Coolant/utilities: Coolant tank 380 L; working pressure 4 bar; total installed power 25 kVA • Dimensions & weight: 2900 x 2500 x 2800 mm • Standard features: Rigid tapping; full safety enclosure; random bidirectional ATC arm; 24-position tool magazine; oil spindle cooling unit; Z-axis gas balancing system; automatic guide lubrication; electrical cabinet heat exchanger; working area lamp; service keys; transformer; manuals and CE declaration Additional equipment • Chip conveyor (screw type) • Optional 40-tool chain-type magazine: BT40/CAT40; max tool Ø 75 mm with adjacent pockets occupied, Ø 152 mm with adjacent pockets empty; max tool weight 8 kg; max total tool weight 160 kg; air pressure required 5–6 kg/cm² Technical Specification Taper Size ISO 40

Condition: used, This listing is for a Walker Safety Cabiets All-In-One Fumigation Unit. The unit is in full working condition and is ready for immediate release. The Walker Safety Cabinets All-In-One Fumigation Unit is an innovative and compact solution for fumigating safety cabinets of all makes and models. Designed with efficiency and convenience in mind, this unit combines a built-in boiler and a carbon filtration system into one easy-to-use device. Lodpfx Amexxx R Njroac Key Features: - Compact Design: Height: Less than 200 mm, allowing it to fit inside a typical safety cabinet opening without the need to open the door further. - Integrated System: Combines a boiler and carbon filtration system, ensuring comprehensive fumigation in a single device. - Capacity: Maximum capacity of 30 ml of formaldehyde and 30 ml of water, making it effective and economical for fumigation processes. - Carbon Filtration: Replaceable Carbon Granules: Requires replacement after each use to ensure optimal performance. - Fresh Supply: Carbon granules are inexpensive and readily available, with a typical shelf life of approximately 18 months. - Walker Safety Cabinets ensures quick delivery of replacement granules for uninterrupted operation. - Benefits: Versatile Compatibility: Effective for fumigation of all safety cabinet brands and models. - Efficient Operation: The compact, integrated design minimizes space requirements while maximizing performance. - Cost-Effective Maintenance: Affordable and easy-to-replace carbon granules keep operating costs low. Applications: - The All-In-One Fumigation Unit is ideal for laboratories and facilities that require effective and convenient fumigation of safety cabinets, ensuring a safe and sterile work environment.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/1989, total width: 2,490 mm, suspension: steel, tire size: 385/65, tire condition: 30 %, wheelbase: 5,460 mm, color: other, Year of construction: 1989, = Additional options and accessories = - Leaf spring = More information = Axle configuration Tyre size: 385/65 Make axles: Fruehauf Tyre profile: 30% Brakes: drum brakes Suspension: leaf suspension Rear axle 1: Max. axle load: 9000 kg Laedpfx Aey T N E Ajmrsc Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 2.840 kg Carrying capacity: 27.160 kg GVW: 30.000 kg Identification Registration number: OB-15-HG

Condition: excellent (used), Viessmann Vitoplex 780 kW. Suitable for biogas; we continuously offer used and new machines ranging from 80 to 2500 kW. Ledpoyzcumsfx Amrjac

Condition: used, Technical details: grinding spindle speed: 1440 U/min Lsdpfx Aju Ng S Dsmrsac voltage: 220 V / Hz total power requirement: 1,1 kW machine weight approx.: 75 kg space requirements of the machine approx.: L:0,4 x B:0,7 x H:1,15 m Polishing block stands on welded sectional steel base with foot plate (400x400x5mm) -wire brushes Ø 200x25mm each are mounted on the left and right -without sanding support -Protection class IP44 -Operation via ON/OFF switch *

Condition: new, Year of construction: 2025, Overband Magnetic Separator – Type DMPM 2000 | Industrial Version Manufacturer: die magnetprofis GmbH & Co. KG Model: DMPM 2000 Condition: New / unused Availability: Immediately ex stock ⸻ Technical Description: The DMPM 2000 overband magnetic separator is engineered for the reliable and continuous removal of ferromagnetic contaminants from product streams. It is ideally suited for use in recycling plants, bulk material processing, crushing plants, conveyor lines, and material processing facilities. ✅ Key Features: • Design: Cross-belt discharge with motor & discharge belt • Magnet type: Permanent magnet (maintenance-free) • Belt width: 650 mm • Magnet length: approx. 2000 mm • Support structure: Robust welded steel construction • Drive: Electric motor with low-maintenance gearbox • Ready to operate: Pre-assembled, ready for operation, incl. lifting lugs • Options: Control unit in the form of a frequency converter, gallows for suspension ⸻ Fields of Application: • Recycling industry (metal, wood, construction debris, etc.) • Conveyor systems in the cement, energy, or waste sectors • Protection of downstream machinery (e.g., shredders, crushers, mills) • Food industry (optionally available in stainless steel version) ⸻ Scope of Delivery: • Overband magnetic separator DMPM 2000 (new unit) • Conveyor belt with drive unit • Suspension system (chains as required) • Documentation (operating manual, CE conformity) • Optional: Control – frequency converter Our core competence is delivering exactly what our customers truly need. Together with our customers, we develop tailored, application-specific solutions and supply corresponding systems from our own production. Lodpfswx H E Djx Amrsac Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnets, metal separator, block magnet, filtration systems

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below Lsdpfjdtdwaex Amroac

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure for bulk material conveying Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400 V, 50 Hz, protection class IP54 Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Ljdpfxjyhznhe Amreac Chevron profile, 17 mm high x 650 mm wide Joint section without profile, endlessly hot vulcanized

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum construction profile ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Discover tailored solutions for your industry! Ledsyhzplspfx Amreac As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!

Condition: new, functionality: fully functional, Forklift Magnetic Sweeper – Stainless Steel – For Clean & Safe Industrial Floors Manufacturer: die magnetprofis GmbH & Co. KG Condition: New Availability: Immediately from stock —— Product Description: Our high-performance forklift magnetic sweeper is ideally suited for the fast and efficient collection of metal debris, shavings, nails, screws, wire scraps, or other ferromagnetic foreign objects on indoor or outdoor surfaces. It reliably protects tires, vehicles, and machinery from damage caused by stray metal parts. The brushed stainless steel construction is not only visually appealing but also guarantees corrosion resistance, durability, and hygienic cleaning – perfect for industrial, workshop, storage, or outdoor use. —— ✅ Technical features: • Mounting type: Fork tine mount – compatible with all standard forklifts • Material: Stainless steel V2A – rustproof & robust • Working width: approx. 1200 mm (other widths available upon request) Lajdpfx Aewx Nbzjmrjc • Magnet type: High-performance permanent magnets (maintenance-free) • Discharge: Mechanical via lever / manual tilting mechanism • Collected items: Nails, screws, shavings, nuts, drilling residues, and more • Ground clearance: Optimized for picking up small metal objects • Fastening: Incl. safety screws for anti-slip mounting —— Fields of application: • Freight companies & logistics centers • Construction depots, municipal operations • Metalworking / locksmiths / workshops • Recycling & waste management companies • Warehouses / production areas • Agriculture (yard cleaning, stables) —— Scope of delivery: • 1x stainless steel forklift magnetic sweeper • 2x wing screws for fork tine safety • Operating and safety instructions —— Enquire now – for clean surfaces and maximum safety. Also available in custom sizes or with your individual logo!