Used Fishing Net for sale (9,709)

Condition: ready for operation (used), Year of construction: 2002, XYZ TC250 Vulcan Turning Centre Year of manufacture 2002 Ø250mm 3 Jaw Power Chuck. Max. Swing Ø500mm. Max. Swing Over Cross Slide Ø330mm. Max. Turning Length 650mm. Spindle Bore Ø87mm. Max. Bar Capacity Ø77mm. Axis Travel 'X'=220mm, 'Z'=650mm. Maximum Spindle Speed 3,500rpm (22.5kW Motor). Spindle Nose A2-8. 12 Position Turret (VDI 40 Toolholders). *For sale with Jet Machinery Ltd* Stock No: 78992 Serial No: 202068 Price: £9,950.00 + VAT Kdjdpfx Agjw U Ekce Usg Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, axle configuration: 1 axle, first registration: 11/1994, total length: 11,150 mm, total width: 2,550 mm, suspension: air, tire size: 425/65R22,5, wheelbase: 7,630 mm, color: black, Year of construction: 1994, Equipment: ABS, = Additional options and equipment = - EBS - Spare wheel - Side doors - Toolbox = Further information = Tire size: 425/65R22.5 Brakes: drum brakes Suspension: air suspension Maximum rear axle load: 10,000 kg Unladen weight: 7,380 kg Payload: 22,000 kg Gross vehicle weight: 29,380 kg Kedpfx Agexwxtzo Usdg

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 66.7 kW (90.69 HP), type of cooling: air, overall weight: 1,060 kg, total width: 1,100 mm, total length: 2,600 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 49.4 kW (67.17 HP), Aircooled chiller/Heat pump CLIMAVENETA MEHP IS G07 0082 66.7 kW/49.4 kW Cooling capacity: 66.7 kW / 18.97 tons (12/7 — 35°C) Heating capacity: 49.4 kW / 14.05 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Kiplink. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi BVK110FBAMT (scroll, inverter) + 1 pcs. Mitsubishi BV110YBAMT (scroll) Type of refrigerant: R32 Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos MGE80A 1-56C-IA-110 (Frequency inverter) Dimensions: 2.6x1.1x2.4 m Weight: 1060 kg Working hours: 0/0 h. Condition: New Kjdpfex Uyudjx Ag Ujdg

Condition: used, Webster & Bennett 48″ EV Type Vertical Borer Serial number 6644-4 Year of Manufacture 1974 Kedpfx Agowtmilo Uedg Power clamping to crossrail 48 inch table 3 off Table Jaws Table Speeds 6.3-140 rpm 42 inch under rail to table 2 axes DRO 37kw / 50hp motor 28″ Ram Travel Coolant Pump & Tray

Condition: excellent (used), Year of construction: 2017, operating hours: 9,400 h, machine/vehicle number: 7584, 2000mm Table CNC S type Elevating Crosslide Webster Bennett (Original CNC). Modified 2 to suit users capacity. Original ATC removed to increase turning capacity. Extended Height workpiece ht. 1600. with Z axis travel. 1350mm ram tooling adapted to accept Capto no.6 tooling. Spindle speed infinitely programmable max 182rpm. Fully remanufactured 2017. Retrofitted with a Fagor 8055 cnc with operator input conversational programming, operator remote for setting. New electrical retrofit with Fagor axis servos and motors. Fully enclosed interlocked guard system, swarf deflectors to removable bins, Kedsvztfkopfx Ag Usdg Full software and documentation available.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 85-70, Self-cleaning overband magnet with frame. Suitable for conveyor belt width of 1200 mm. Working length 1470 mm x working width 645 mm. Ksdpfox Tid Eex Ag Ujdg

Condition: used, This listing is for a Labnet Vortemp S2056A Shaking Incubator The unit is in full working condition and is ready for immediate release The Labnet Vortemp S2056A is a versatile shaking incubator designed for simultaneous heating and mixing of small samples. It is ideal for applications in biochemistry, microbiology, and clinical laboratories. Key features include: Interchangeable Platforms: Microplates: Accommodates up to 4 standard or 2 deep well microplates. Microtubes: Accommodates up to 56 x 1.5/2.0 mL tubes. Precise Digital Controls: Time: Precise digital control for accurate timing. Temperature: Temperature range of ambient +5°C to 60°C. Speed: Speed range of 200 to 1200 rpm. Mechanical Convection: Ensures uniform and stable heating throughout the incubation process. Cold Room Compatible: Suitable for sub-ambient applications, making it versatile for a wide range of laboratory settings. Construction and Operation Housing: Constructed of steel plate coated with highly resistant polyurethane lacquer. The interior chamber is isolated with special thermal protection materials and insulation foam. Kdjdpfx Agjxv D Dis Ujg Mechanism: The motor drives the eccentricity control mechanism, generating the orbital motion of the sample platform. The temperature and shaking mechanism are regulated via microprocessors for precise control

Condition: refurbished (used), Year of construction: 1990, div. Chamber filter presses from Rittershaus & Blecher, Netzsch and Passavant to be handed over, plate format 1200 x 1200 and 1500 x 1500 mm, from 40 - 145 PP plates, content from 1000 - 4500 liters, length approx. 6 - 13.6 m, all presses have to be refurbished are then sold with a 1 year guarantee, a piston Membrane pump for loading can also be offered, location is 58762 Altena Kdodpfx Agjgpxg Ss Usg

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 630 x 630 mm, 20 - 60 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 10 -15 bar, capacity 200 - 500 liters, filter area 13 - 40 m², dimensions 2000 - 4500 x 900 x 1300 mm, weight 1500 - 2500 kg, optionally with manual or motor hydraulics, with or without filter cloths Kedpfx Ajfbbp Dog Ujdg

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 800 x 800 mm, 20 - 100 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 10 -15 bar, capacity 200 - 1500 liters, filter surface 20 - 100 m², dimensions 2500 - 9000 x 900 x 1300 mm, weight 3500 - 10000 kg, motor hydraulics, with or without plate transport, with or without filter cloths Kdedpfx Ajfbbp Sjg Ueg

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 145 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Kjdpfx Ajfbbqheg Ujdg

Condition: used, Item No.: Pum 28 Manufacturer: Netzsch Model: NM038BY Item condition: used Stock: 1 Available: immediately Flow rate: 6 m³/h Delivery pressure: 3 bar Speed: 276 rpm Year of manufacture: 2019 Motor Manufacturer: Nord Power: 0.88 kW Kedpsxb Rvvjfx Ag Usdg Voltage: 3 x 400 Volt

Condition: excellent (used), BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Kdsdsx Nf Ilopfx Ag Ueg Measuring and correction system Length measurement: integrated Width measurement: integrated Automatic rotation correction: available

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Kodpfx Ajv Tdq Ieg Usdg Our core competence lies in delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: new, Year of construction: 2025, functionality: fully functional, rotor diameter: 360 mm, power: 45 kW (61.18 HP), Material shredder 45KW Hopper opening: 1,030 x 1,235mm Rotor diameter 360mm Star-delta start, automatic stop at idle speed - Hydraulic pusher equipped with pressure plates - Siemens SPS control system - Optional with control cabinet extension for discharge conveyor + overbelt magnetic separator Complete solution with discharge conveyor belt in any design. Our core competence lies in supplying the customer with exactly what he really needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grid, magnetic grate, metal separator, block magnet, filter systems Kdjdpfx Aet Rivtjg Uog

Condition: used, functionality: fully functional, Good working condition. Please check out our other listings as well. Ksdpeupx E Ujfx Ag Uedg

Condition: used, functionality: fully functional, Flow Cabinet/Safety Cabinet. Good working condition. Please check out our other listings as well. Kdsdpfxsupx E Is Ag Uog

Condition: not inspected (used), functionality: unexamined, total length: 1,500 mm, total width: 700 mm, total height: 1,200 mm, overall weight: 400 kg, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned off due to a business closure. Submitting a bid obligates you to collect within the specified period between 26/01/2026 and 29/01/2026! Kodpfx Agsxqm Ims Ujdg Three workshop drawer cabinets are up for auction. The contents include: RÖHM 3-jaw chuck (diameter: 200 mm) Clamping devices Reamers Twist drills Milling cutters Collets Milling table (table dimensions: 280 x 210 mm, with 4 T-slots) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 700 x 1,200 mm Weight: 400 kg

Condition: not inspected (used), functionality: unexamined, total length: 1,200 mm, total width: 770 mm, total height: 1,200 mm, overall weight: 400 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table diameter: 350 mm Table dimensions: 600 x 210 mm Number of T-slots: 4 Table dimensions: 600 x 200 mm Number of T-slots: 4 MACHINE DETAILS Dimensions (L x W x H): 1,200 x 770 x 1,200 mm Weight: 400 kg EQUIPMENT Collets Boring heads Various clamping devices Counter-holder Rotary table Milling tables All accessories suitable for DECKEL tool milling machines Kdjdpsxqm Erofx Ag Ujg

Condition: not inspected (used), functionality: unexamined, total length: 1,370 mm, total width: 750 mm, total height: 1,100 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned off as part of a business liquidation. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! Included: Boring heads Boring tools Collets High-speed milling head Kodpfx Agjxqm Duo Usdg Counterholder Additional clamping equipment The accessories are suitable for DECKEL tool milling machines. MACHINE DETAILS Dimensions (L x W x H): 1,370 x 750 x 1,100 mm Weight: 300 kg

Condition: as good as new (ex-display), Year of construction: 2024, Universal machines for a wide range of applications Kodoxyy Dmspfx Ag Uedg Reliable and robust band sawing machines, machines for a long service life

Condition: as good as new (ex-display), Year of construction: 2024, Universal machines for a wide range of applications Reliable and robust band sawing machines, machines Kjdsxyy Dgjpfx Ag Uodg for a long service life

Condition: used, Touches 3-points Steady for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Kdsdpjxxu U Djfx Ag Ueg Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Kodpfsxxu Spex Ag Usdg Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 01858, load capacity: 5,000 kg, Retrovit by Flaig Magnetsysteme Kedoxlagfopfx Ag Usdg