Used Finishing Line for sale (13,087)

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, RADEMAKER / RONDO Topline ASTec.W industrial line – Production of layered and filled products Complete RADEMAKER / RONDO industrial line for sheeting, gauging, shaping, filling, and cutting dough products. The equipment was previously used for the industrial production of salmon en croûte. Thanks to its modular design and numerous workstations, it can be adapted to other pastry, viennoiserie, and savory or sweet layered product productions, subject to the necessary tooling and adaptations. 1. RADEMAKER Block Processor – 2006 Industrial equipment designed for the gradual reduction of dough blocks into a homogeneous strip, particularly for processing layered dough blocks. Type: Block Processor Year: 2006 Serial number: 280053 Working width: 650 mm Belt width: 650 mm Weight: 1,725 kg Power supply: 240/415 V, three-phase, 50 Hz, 17 A Documented dimensions: 6,000 × 1,400 × 2,850 mm 2. RONDO Topline ASTec.W Industrial line for shaping and preparing filled products. Model: Topline ASTec.W Line reference: D2147 Manufacturer documentation: edition 01/2012 ASTec hygienic design adapted for wet cleaning. Documented composition: Dough feeding and conveying belts. Two RONDO flour dusting devices. RONDO laminator, working width 740 mm, belt 700 mm. 15-meter industrial shaping table, 700 mm belt, with marking, cutting, and spraying devices. RONDO Rondofiller dosing unit for filling application. Overlay conveyor for working with two layers of dough. Gauging unit. RONDO ZST600 cutting station. RONDO station, model ZKWA605A.A, year 2011, machine number D1221401, working width 660 mm. RONDO guillotine, model ZGEM700W.A, year 2009, machine number C9273305, with documented tooling of five 80 × 125 mm dies. Dough scrap recovery system. Electrical control cabinet and Siemens operating interface. 3. Applications Laedpfxe Abz D Ie Akweh The line was used for the production of products based on salmon wrapped in dough. It also offers possibilities for adaptation to various layered products, turnovers, pastries, filled specialties, and preparations involving two layers of dough. Other applications can be considered depending on the cutting, shaping, and dosing tools available or to be installed. 4. General characteristics Manufacturers: RADEMAKER / RONDO Years of major equipment: 2006, 2009, and 2011 Total length of the documented configuration: approximately 24 meters Documented maximum width: approximately 2 meters Documented maximum height: approximately 2.85 meters Width of production conveyors: up to 700 mm depending on the section Technical documentation and manufacturer's manuals available. Industrial line consisting of several modules that can be considered for adaptation to other productions. The exact composition, available accessories, and production possibilities must be confirmed during technical inspection.

Condition: like new (used), Automatic line which has been used for producing 2 million toffee / candy apples over 6-8 week period. Complete lines available, to manufacture the toffee sauce, melt the chocolate, fire sticks into the apples and robotically dip them in sauce then flow wrap the finished product. Laodjhtv Uwjpfx Akwsh

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Laedpfxszzlqnj Akwoh Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: used, Year of construction: 2002, Overview Lasdpfxoxhf Hie Akwoh This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1881 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Included in the price - Dismantling - Loading onto trucks - Export documents

Year of construction: 2006, operating hours: 20,000 h, condition: used, functionality: fully functional, machine/vehicle number: 114058, Used Metla Toledo Safe Line Metal detector Used for 60,000 Buns per hour Taken out of commission in 2024 Air Reject system Lajdpfx Ajy R S Izjkweh Reject Bin with Hood and sensor Belt Included Lh hand machine Rh Hand Machine

Condition: used, Year of construction: 2007, Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data - Product: still wine - Containers: glass bottles, design bottle 0.75 l - Line output: 12,000 bottles/h - Closures: natural cork, aluminium roll-on screw caps, shrink capsules Laodpfjz I Rcasx Akwjh - Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line - Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off depalletizer, layer-pad and empty-pallet handling, 14,000 containers/h | 2023 | - Bottle washer | KHS | INNOCLEAN | single-end washer for returnable glass, up to 14,500 bottles/h, drive and panel modernised in 2022 | 2007 | - Empty bottle inspector | Krones | LINATRONIC M | base, finish, thread, sidewall and residual liquid inspection | 2018 | - Filler-closer monoblock | KHS | INNOFILL NRF | 50 filling valves, cork closer and Zalkin roll-on capper with 10 heads each, CIP, 12,000 bottles/h | 2007 | - Capsuling machine | Kematec | MBK 12 AS | shrink capsules, 12 heating stations, up to 12,000 bottles/h | 2006 | - Bottle dryer | Kematec | T20-3 KMT | air-knife tunnel | 2006 | - Labeller | Krones | ERGOMODUL | 2 cold-glue and 2 self-adhesive stations | 2020 | - Case packer | KHS | INNOPACK SP | pick-and-place packer, KUKA controller | 2006 | - Palletizer and stretch wrapper | ABB, Strapex | FLEXPALLETIZER, SWR 30 | 2 robot cells, pallet destacker, ring wrapper | 2007 | - Pallet labeller | Logopak | LOGOMATIC 920 II PF | print-and-apply | 2007 | - Conveyors | all connecting bottle, case and pallet conveyors of the line Process area - Filtration system | KHS | CORVUS | cartridge microfiltration, 4 housings | 2007 | - Wine warmer-cooler | KHS | INNOPRO | plate heat exchanger, up to 9,900 l/h | 2006 | Condition Used, still installed. Each machine is also listed on its own page with full technical data and photos - follow the link at the end of each row in the scope of delivery. Availability Available immediately. Location: Belgium. Delivery terms: Ex Works Belgium.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07022/01, We are offering this used Cefla Finishing SPRAYBOTIC RU MW machine, manufactured in 2007. Laedpfxszhbd Ro Akwoh Machine type: SPRAYBOTIC RU MW Year of manufacture: 2007 Serial number: 07022/01 Supply voltage: 380 V Electrical frequency: 50 Hz Total installed power: 38.5 kW If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Schmedt hardcover book production line Lasdpfx Ajz S Uzijkwjh The machines are in very good condition and have seen little use. The set consists of the following machines: – Schmedt PraLeg book block casing-in machine – Schmedt PraForm Pro book press and joint-forming machine – Schmedt SC-3 Autocase cover assembly table – Schmedt PraziCoat Pro gluing machine (coater) – Schmedt BT-1 Board Trimmer (automatic board cutter) Includes documentation, spare parts, and glue.

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Ledpsq Nywxjfx Akwoah Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.

Condition: used, Year of construction: 2006, functionality: fully functional, Modular and scalable design Probable working width 600 mm Electrical supply 400 V Rated current 16 A Frequency 50 Hz – to be confirmed Output up to 7,500 pieces/hour Programmable control with touchscreen 50 memorizable programs Rex head according to configuration Weight range 35 to 85 g with Basic Rex Laodpfx Aozp H Epskweh Weight range 50 to 110 g with Basic Rex Pre-lamination before fermentation Resting pre-fermenter Optional pre-fermenter air conditioning Interchangeable stamping station Optional longitudinal cutting station RR forming station according to configuration WK-RR forming station according to configuration Seeding unit according to configuration Automatic depositing onto trays or belts Drive power 3.5 to 5.3 kW Fermenter air conditioning 4.4 kW Fermenter water 15 l/h maximum at 2 bar Seeding water 40 l/h at 2 bar Maximum height approximately 2,640 mm Used industrial line for rolls – König Combi Line The used König Combi Line is a modular line designed to automate the dividing, rounding, resting, shaping, and depositing of rolls. Its scalable design allows different modules to be combined according to the desired products, required output, and organization of the bakery. The nameplate identifies this equipment as a Combi Line manufactured by König Maschinen Kft. The visible machine number is 06.6.0070. The beginning of the configuration code appears to correspond to a 600 mm width version, but the complete composition of the line must be confirmed by an inventory of the modules present. Why this line stands out The Combi Line is based on a modular architecture, allowing the production of numerous formats from a single installation. Depending on its configuration, it can integrate a Rex dividing-rounding head, pre-lamination, a pre-fermenter, a stamping station, a forming station, a seeding unit, and an automatic depositing unit. This modularity facilitates the adaptation of the line to changes in production. Additional equipment can be added later without replacing the entire installation. Key advantages Modular and scalable design Automated production of many types of rolls Output of up to 9,000 pieces per hour Gentle dough handling with Rex heads Memorizable settings for different productions Quick tool changes for stamping Automatic depositing onto trays, belts, or boards Wide choice of shaping and finishing modules Seed recovery, limiting waste Easy access for cleaning and maintenance Products achievable depending on the configuration The Combi Line range allows the production of round, oval, flattened, laminated, stamped, cut, rolled, or seeded dough pieces. It is particularly suitable for hamburger buns, hot dog buns, milk bread rolls, Kaiser rolls, Kornspitz, decorated rolls, donuts, bocadillos, and long products such as half-baguettes. It can process wheat doughs, mixed doughs, cereal doughs, and various leavened doughs, provided they are compatible with the dividing head and installed tools.

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Ljdstiy Ntspfx Akwsah Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 3CR00632, Leasing return condition Very good, full-service contract with Canon Model Serial No Period To Line Description End Meter Read Ledpoz Izzmofx Akwsah imagePRESS C10010 Booklet Finisher 3CR00632 31.03.2026 Color A3 200,111 imagePRESS C10010 Booklet Finisher 3CR00632 31.03.2026 Color A4 7,617,400 imagePRESS C10010 Booklet Finisher 3CR00632 31.03.2026 Mono A3 892 imagePRESS C10010 Booklet Finisher 3CR00632 31.03.2026 Mono A4 8,209,072 Canon imagePRESS C10010 VP 1 × Professional color digital printing system including PRISMAsync & Booklet Finisher High-performance production printing systems for high-quality color and black & white productions with extensive paper feeding, workflow control, and scan & finishing equipment. System overview Quantity 1 System Model Canon imagePRESS C10010 VP System Type Professional color digital printing system Printing Speed up to 100 pages/minute DIN A4 A3 Printing Speed up to 57 pages/minute SRA3 Printing Speed up to 54 pages/minute Max. Paper Size up to 330 × 483 mm or special formats Paper Weight up to 350 g/m² depending on the feeder/finisher Duplex Printing Yes Color Management / Controller Canon PRISMAsync Print Server Colors CMYK Toner Canon T02 – BK / C / M / Y Equipment per System Printing System • imagePRESS C10010 VP Series / Marking Engine • imagePRESS C10010 VP Series Fixing Station • imagePRESS C10010 VP Series Power Supply Unit • Operating Panel-A5 incl. Operating Panel Foot-D1 • Operator Attention Light-D1 • CABLE MAINS, C13 EUR • Canon TONER T02: BK, C, M and Y PRISMAsync Print Server & Software • PRISMAsync for imagePRESS C10010VP-A1 • PRISMAsync Options Bundle C10010VP-A1 • PCL6 TP-J1 • IPDS-J1 • PDF for IPDS-J1 • PRISMAsync Remote Match imagePRESS C10010VP • imagePRESS C10010 License / Resale License Paper Feeder & Scanner • POD Deck-D1 – High-performance paper feeder for production • Duplex Color Image Reader Unit-M2 • Reader Attachment Kit-B1 Finishing • Finisher-AN1 – Professional collating and booklet finishing unit • Automatic sorting, set collation, and booklet making • Punch Unit-BT1 – Automatic 2/4-hole punching Color Management / Process Control • i1 Process Control v5.3 to support color calibration and reproducible printing results Scope of Supply 1 × Canon imagePRESS C10010 VP – with PRISMAsync Controller, POD Deck, Duplex Color Scanner, Booklet Finisher, 2/4-hole punching, as well as the workflow and color management licenses listed above.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 14,000 mm, total width: 4,500 mm, total height: 2,900 mm, overall weight: 12,000 kg, input voltage: 415 V, track width: 80 mm, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Model - PIE LINE. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Working width – 800mm wide. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Overall footprint – 14m long x 4.5m wide (including return conveyor) x 2.9m high. Line maximum width – 2.2m at widest point. This production line comprises of the following equipment/machinery: 1. 2 X sets of tooling complete with trollies – 1 X set for 4-across pies with casing diameter of 110mm and 1 X set for 3-across ‘family-style’ pies with casing diameter of 180mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 5a. Rademaker Flour Sifter. 6. Rademaker Tamping unit (used to press / tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘SPRAYING DEVICE’. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Press / Crimping unit / Marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie Exit/Discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. Lsdpfx Aszvmy Hokwjah 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. CONDITION - Requires some reconditioning before entering production. NOTES – BUYER TO REMOVE FROM SITE.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Lajdpfxeuq Sb Se Akwjh

Condition: refurbished (used), Meat processing line to produce a coarse sausage mix / burger mix / pet food line Taking a tempered frozen meat block into a Guillotine Giraffe feed up into a mincer, Mincer to coarse mince flaked meat Incline conveyor taking minced meat through a 10 mm to 16 mm hole plate Minced meat transferred by the conveyor into the Mixer Grinder Add seasoning / water etc to complete the recipe Mix in the mixer grinder for 3 to 5 minutes Mince out through a 5 mm to 8 mm hole plate into a tote bin. Ruhle Guillotine Scansteel Giraffe Feeder Laska WW 130 2 Cross feed Mincer Incline conveyor Thompson 4000 Mixer Grinder Lsdpozl Tb Njfx Akwsah Product ready for the next stage vacuum filler / tray depositor / burger former etc

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 2 x Packing lines, previously used for salad leaf, consists of; 1 x Multipond MP-14-7100-2500-J plus infeed + gantry 1 x Multipond MP-14-3800-1250-J plus infeed + gantry 1 x VH Centurion SI440 (VFFS) with printer + label applicator Laedpsz Arlhofx Akwoh 1 x GIC4100 (VFFS) with printer + label applicator 2 x Loma checkweigher + metal detector combination 2 x packing tables All machinery is fully working and ready to be decommissioned

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours 2. CAP30 cap applicator for Helicap23 Pro26 3. Easy Ride Terplus cartons accumulator Lasdpfx Asycwvaskwjh 4. TCBP70 wrap around packer 5. Conveyor system 6. Conveyors system The line is in very good condition, still in production till April. Can be sold without CAP30 applicator.

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE 11 STATIONS WIDTH: 450 mm Lasdpfxjy Rxzhe Akwjh FULL OVERHAUL

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Model S-PS80HA YOM 2008 Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Carton format: 500ml, 750ml, 1000ml The line includes: Laedpfxexdbwis Akweh - Elopak filler S-PS80HA for Pure Pak classic packaging material - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap - WA-Flex-30 packer - Conveyor system. - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.

Condition: used, Year of construction: 2015, Overview Laedsz E U D Nspfx Akwsh Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Ljdpfxjz Rk Ico Akwjah Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Ljdpfxjyzxyxj Akwoah Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: refurbished (used), ROLLFORMING LINE Ledpfx Akjg Rkv Ejwjah

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Width: 260 mm Ljdpfxoymzzuo Akwjah

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE 9 STATIONS Ljdpfx Asymzxyjkwoah WIDTH: 450 mm