Used Finishing Lathe for sale (8,380)

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm Bjdpfxoxugdie Adxoww internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Bwodpoxp Hudsfx Adxow

Condition: ready for operation (used), Year of construction: 1995, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. The machine was only used in a prototype workshop for sporadic applications. Bwjdpfx Asxtfx Asdxew Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), YEAR OF MANUFACTURE: 1963 (see attached documents for technical data) Bwsdpfx Asxcw Axjdxow Swing diameter: 600 mm Turning length: 1000 mm Equipment: - Three-jaw chuck Ø 250 mm - Four-jaw chuck Ø 250 mm - Tailstock center - Quick-change drill chuck MK5 - Documentation

Condition: new, Year of construction: 2025, 0390 mm 610 mm 54 mm 330 mm Bwjdpfx Aow In Epodxsw 4000 U/min A1-6 DIN 55026 60 mm 140 mm

Condition: used, Year of construction: 2006, with C-axis with driven tools FANUC 18T-C control turning diameter -380 mm turning length 490 mm Spindle speed -3,500 rpm Upper turret holder with 12 positions, 6 of which are driven Bjdpfxjr E Amge Adxjww Tool presetter Chip conveyor

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed shaft lathe Manufacturer: WEILER, Model: COMMODOR Year: 1979 Technical Data Make: Weiler Model: Commodor Centre distance: 1000 mm Bjdsxt Ngqspfx Adxjww Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63–2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • 3-jaw chuck • Multifix tool holder All information without guarantee. A demonstration under power can be arranged at any time in our showroom.

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm Bwjdjw E Nkispfx Adxow -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: good (used), Year of construction: 1984, 6 spindles Tapping with electronic limit stop Hexagonal punching Bwodev R U D Tjpfx Adxsw Calibration Pick-up device Many accessories With IEMCA PRA 40/42 F bar loader Includes STEIMEL chip removal, box conveyor, and 24/7 production

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/0001/09472, MACHINE SPECIFICATION Distance between centres 635mm Centre height 165mm Bodpfxexn Iv Tj Adxsww Swing Swing over bed 335mm Swing over cross slide 209mm Spindle Bored to pass 40mm dia Nose D1-4 Camlock Morse taper in nose N0 3 Width of bedways 231mm Travel Total travel of cross slide 209mm Total travel of top slide 95mm Total travel of tailstock barrel 146mm Speeds Spindle speeds (16) 22-1800rpm Spindle motor 2.25kW MACHINE SPECIFICATION Cont’d Whitworth threads (45) 2-72tpi Diametral threads (21) 8-44 Metric pitches (39) 0.2-14.0mm Module pitches (18) 0.3-3.5 Feeds Sliding feeds 0.001-0.040 ipr/spindle Surfacing feeds 0.0005-0.020 ipr/spindle Tailstock Approx weight 800Kg Machine in Imperial execution MACHINE EQUIPPED WITH 3 jaw chuck Quick change toolpost and 6 off toolholders Ainjest high speed screwcutting attachment Single bedstop 5 Position turret bedstop Apron dial Chuck guard Coolant system Rear splashguard

Condition: good (used), Year of construction: 2007, Used CNC lathe from Doosan Type: Lynx 220 Turning diameter: 250 mm Turning length: 550 mm Spindle bore: 51 mm X and Y axes 12-position tool turret Bedpfxjxpxb As Adxeww Fanuc CNC control LNS bar feeder

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) Bwsdpoxq Hhyjfx Adxow particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: excellent (used), Year of construction: 2020, operating hours: 3,349 h, functionality: fully functional, SMEC Samsung Turning Centre Model SL4500XY Bjdpfsxcny Uex Adxeww Year 2020 Fanuc Series Oi-TF Control 775 mm swing over bed 630 swing over cross slide Max machining dia – 680 mm Max length to be confirmed – 2000 mm Bar working dia – 117.5 mm X travel 350 mm Chuck size 534 mm SMW Autoblok Type SLU-X-4-ZS Steady Live Tooling – 6 Driven tools Swarf Conveyor The machine is in excellent condition

Condition: used, Year of construction: 1998, turning length 2000 mm 980507 x-axis 7000 mm z-axis 10000 mm 65 mm total power requirement 15 kW weight of the machine ca. 3,5 t Bwjdpfx Adew Syb Dexsw

Condition: excellent (used), Year of construction: 2012, ONLY 8,300 spindle hours! Control: TX 8 i-p MAIN SPINDLE Max. bar capacity: 32 mm Max. workpiece length - Swiss-type operation: 245 mm - Short turning operation: 125 mm Max. spindle speed: 6,400 rpm C-axis SUB SPINDLE Max. bar capacity: 32 mm Max. clamping depth of workpiece: 250 mm Max. spindle speed: 6,000 rpm C-axis UPPER TOOL TURRET Number of stations: 10 All driven Max. speed: 12,000 rpm Bwodpfx Ajxrf Etjdxsw LOWER TOOL TURRET Number of stations: 9 All driven Max. speed: 12,000 rpm BACK WORKING UNIT Number of stations: 8 Driven stations: 3 (T12, 13 and 14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist filter Bar loader FMB turbo 3-36

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,105 mm, Tooling package  Chip conveyor Samchully 3 chuck 400 mm with jaws Bedpfxjwyun As Adxeww Max. turning Ø: 790mm X-Axis: 352mm Z-Axis: 1105mm Spindle bore: 116.5mm Speedrange: 2000Rpm Spindle power: 37kW ATC / revolver: 10 Speed live tools:4000Rpm Power live tools:25kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 6Mk Stroke pinole: 120mm Quill Ø: 120mm Workpiece load: 1700 Length: 4600mm Width: 2056mm Height: 2195mm Weight: 11050kg

Condition: good (used), Year of construction: 2006, Used CNC lathe from Viktor Bwsdpfx Aoxpxafodxow Type: VTurn II 26 Turning diameter: 520 mm X: 240 mm Z: 1250 mm Spindle: 87 mm Y-axis C-axis Driven tools Hydraulic steady rest Chip conveyor

Condition: used, Year of construction: 1966, turning diameter over bed 330 mm turning dia. in gap 400 mm turning length 600 mm centre distance 750 mm Bwjdjxrg Atepfx Adxow spindle turning speed range 20 - 1000 U/min spindle bore 25 mm 3-jaw chuck Röhm, Ø 200 mm dimensions of the machine ca. 2000 x 800 x 1500 mm weight of the machine ca. 1200 kg Fixed bezel Turning bezel Turning center point Three-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jaws Quick-change tool holder Original Multifix size B with 2 change holders Spindle brake Tailstock quill MK3 Machine feet Lathe chuck guard Chip guard Work light

Condition: used, turning diameter 210 mm turning length 1000 mm swing diameter over bed slide 435 mm centre height 210 mm greates pass round over bed 435 mm spindle head DIN 55027 / DIN ISO 702-3 spindle bore 52 mm turning speeds 44 - 2.000 U/min transmission ratio 12 feed per revolution 0,036 - 2 U/mm diameter of quill 65 mm quill stroke 120 mm taper bore DIN 228 MK4 total power requirement 5,5 kW -Lead screw and feed screw cover -Brake for main spindle -Toolmaker precision according to DIN 8605 -High drive power and high torque on the main spindle -Large thread cutting range -Convenient operation -Digital position display (HEIDENHAIN ND 7013) 3-axis display for bed, cross slide, and top slide Tool memory for 16 tools Tool memory with one reference point per axis Sum button for Z and Zo Inch/metric switchable Plane path X as radius or diameter display Display resolution up to 1 µ Bsdpfsxqrdyox Adxjww Taper calculator -LED machine light -Coolant device

Condition: used, Year of construction: 1988, turning diameter 570 mm turning length 2000 mm Bwodsw Syk Sspfx Adxow control ja weight of the machine ca. 3,5 t

Condition: used, Year of construction: 2006, bar material dia. 20 mm spindle passage 22 mm Bwsdpjxukr Dsfx Adxsw turning length 205 mm Control Siemens Yaskawa turning speeds 500-10.000 U/min c-axis 0,001 ° gripping station 20 mm turning length 30 mm positive location each 0,001 ° Number of tools 10 fest / fix St. total power requirement 2,2/3,7 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,6 x 1,2 x 1,8 +FMB m CNC sliding head lathe Star Ecas 20, built in 2006, with FMB minmag 18 loading magazine, in good condition, from the medical technology sector. Two machines of the same type and year of manufacture are available.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, In addition to the machines mentioned and shown, we have many other machines and accessories (blast systems, conveyors, and small machines) available from stock. The machines can be purchased or rented. Contact us for (free) advice in the field of vibratory finishing, tumbling, and blasting technology. Bedpfswfdbcox Adxeww

Condition: like new (used), Year of construction: 2019, operating hours: 1,256 h, functionality: fully functional, machine/vehicle number: HTS.XD.26.A1.0133, Machine Name - Dugard Hanwha Machine Model - XD26H S.N A1.0133 Y.OM 2019 Description - Bedpewxl Rljfx Adxeww Fanuc i Series control Max Turning diameter 26mm 8000 RPM main and sub spindle Upto 20 tools can be used LNS Alpha 312 Barfeed

Condition: used, Year of construction: 2000, turning diameter over bed 340 mm turning length 190 mm circulation diameter max. 158 mm x-axis 300 mm Bwjdpfx Ajw Sybkodxow y-axis 300 mm spindle bore 42 mm 2 weight of the machine ca. 2,6 t dimensions of the machine ca. 2200,0 × 1400,0 × 1800,0 m

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm weight of the machine ca. 3,6 t Bwsdpjw Syd Sjfx Adxjw