Used Fine Mill for sale (11,411)

Condition: like new (used), Year of construction: 2009, bore capacity in steel (diameter) 20 mm x-travel 240 mm y-travel 160 mm table-size 430 x 240 mm spindle taper MT 2 spindle turning speed - stepless 200 - 3600 U/min quill stroke 75 mm voltage 400 V total power requirement 0,7 / 1,3 kW weight of the machine ca. 220 kg dimensions of the machine ca. 0,60 x 0,85 x 1,65 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 187426 - Stepless speed adjustment - Digital speed display - Cross table - Collet chuck Djdjzyvadepfx Aa Hjkt - Mounted on a base frame

Condition: used, Second-hand KUPER RFG roller shutter guide milling machine for milling the roller shutter guide slots into the roller shutter guide strips / roller shutter guides / roller shutter guide rails, fitted with a Scheer HM 16 hand-held router. Technical data: - Speed: 18,000 rpm - Power: 2,000 W Dkedpfx Aajzza A Ss Hst

Condition: used, Year of construction: 1991, spindle diameter 115 mm x-travel 2000 mm y-travel 1200 mm control Heidenhain TNC 355 Lotse z-travel 1200 mm Dkedpfezyvcxox Aa Hjt w-axis 590 mm total power requirement 48 kW

Condition: used, Year of construction: 1995, turning diameter 510 mm turning length 1000 mm Dedpfszyvcrsx Aa Hokt control MAZATROL T PLUS total power requirement 22-26 kW weight of the machine ca. 6,5 t

Condition: used, operating hours: 11,655 h, functionality: fully functional, spindle bore: 65 mm, overall weight: 8,500 kg, spindle diameter: 65 mm, Well-maintained WT150 lathe, including an LNS Quick Load bar loader, fixed chucks, powered chucks, and Hainbuch collets. Dksdezylw Eepfx Aa Hst

Condition: used, Grinding rollers for Pfeiffer / Babcock bowl mill Used, refurbished, and new available from stock Heavy-duty grinding rollers from a bowl mill available for sale Dksdpfx Aaey Ittyj Het Viewing possible by appointment.

Condition: used, Year of construction: 1993, machine/vehicle number: H 3391, power: 7 kW (9.52 HP), equipped with 1 four-roll feed unit - Wegoma, Vario 3 Dkjdpfxszy Hp As Aa Hjt Information: small motor not functioning large motor, 7 kW, is running

Condition: used, Year of construction: 2001, The award requires approval! Dkedpfx Aaszy Hpco Hst

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m The machine is equipped with angle milling heads for large engine machining. + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. Dsdpfxezwg Nkj Aa Hjkt + incl. 16 milling heads and misc.tools the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW Dsdpszynypofx Aa Hekt bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: good (used), Year of construction: 2007, functionality: fully functional, Note: Machine is still at the customer’s location – available at the beginning of 2027. Dedpfx Aszxrnnja Hokt For sale is a mobile Hartenberger “Wirex CZ-1/1 band sawmill / mobile sawmill in a robust design. The system is designed for cutting roundwood or logs into boards, planks, and timbers. The existing hydraulic log handling system with a loading/lifting arm, log turner, and log clamp allows larger logs to be handled and positioned on the system. Technical data / equipment: Manufacturer: Hartenberger woodworking machines Model: Wirex CZ-1/1 Machine type: Band sawmill / mobile sawmill Year of manufacture: 03/2007 Motor power: 12 kW Total weight: approx. 2,500 kg Width: approx. 2,355 mm Height: approx. 2,850 mm Mobile design Tandem chassis Electric, continuously variable feed Feed speed: approx. 4–35 m/min Electric height adjustment via chain Roller diameter: approx. 500 mm Saw band length: approx. 4,800 mm Saw band width: approx. 35–45 mm 1 loading/lifting arm 1 log turner with gripper 1 hydraulic log clamp Hydraulic log handling Roller/support track for the logs Dust extraction connections Stable steel frame construction Condition and scope of delivery according to photos The system is in used condition, corresponding to its age, and shows corresponding signs of wear. Inspection and demonstration possible by appointment. Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes subject to confirmation. All information without guarantee.

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Equipment and technical specifications: Dkjdezyy Aijpfx Aa Hot

Condition: used, Year of construction: 2001, functionality: fully functional, CNC turning and milling center Okuma MacTurn 30 Control system: OSP-U100L Year of manufacture: 2001 Internal machine number: 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Diameter of rotation over the machine bed: 500 mm Diameter of rotation over the tool slide: 500 mm Tool holder: SK 40 Tool positions: 60 positions Travel ranges: X-axis: 430 mm Y-axis: 190 (+/-95) mm Z-axis: 1,090 mm C-axis: 0.001° - 3-jaw chuck SMW Autoblok - Programmable tailstock - Chip conveyor - Paper band filter system with high-pressure pump - Oil mist extraction system Dsdjzwl Raspfx Aa Hekt - Touchsetter - One Touch IGF - Door automatic - Large chuck package - Large tool package

Condition: excellent (used), Year of construction: 2003, Tool holder, vertical + horizontal SK 40 Table size L x W 710 x 315 mm Speed range, vertical spindle 63 – 2500 rpm Speed range, horizontal spindle 45 – 1800 rpm Travel ranges: X-axis, longitudinal adjustment, automatic / manual 400 / 420 mm Y-axis, cross adjustment, automatic / manual 220 / 228 mm + cross slide 375 mm Z-axis, vertical adjustment, automatic / manual 350 / 380 mm Adjustment of the quill, vertical, manual 80 mm Machine dimensions, approx. 1550 x 1620 x 1850 mm Machine weight, approx. 1300 kg Accessories / Special features: • 3-axis digital display, manufacturer HEIDENHAIN • Infinitely variable feeds with rapid traverse in the 2nd feed stage Dkjdpfeziutzex Aa Hot • Two working spindles for horizontal and vertical tool holders (vertical milling head does not need to be removed during machining when the horizontal spindle is in use) • Ball screw spindles for the X and Y axes, simultaneous milling in X and Y direction possible • Trapezoidal screw spindle, hardened and ground, for the Z axis (vertical) • All operating elements on one side, in the mobile control panel • Additional manual adjustment of the cross slide increases the working area of the machine, even beyond the table surface • Safety handwheels • Tool holder according to DIN 2080 – steep taper ISO 40 • Automatic central lubrication for speed and feed gears • Vertical milling head with quill, swiveling L+R • Fixed angle table 315 x 710 with 5 slots 12 mm, spacing 63 mm • Tool clamping spindles, horizontal and vertical • Splash guard made of Plexiglas on 3 sides of the horizontal table • Coolant system • CE compliant TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2007, CNC Lathe GILDEMEISTER CTX 420 Linear 2007 Siemens 840 D Dodpjw Slfbofx Aa Hskt Technical specifications: * Turning length: 600 mm * Turning diameter: 680 mm * Spindle bore: 79 mm * Spindle speed: 5000 rpm * Spindle power: 25 kW * Chip conveyor: Yes * Variable spindle speed: 5000 rpm Main spindle with bar capacity: Ø 65 mm Self-centering Autoblock chuck: Ø 250 mm

Condition: used, Year of construction: 2021, Bauer Maschinenbau Bohrmax Z40, Section Drill & Milling Machine, Overall Table Length 4350mm, 4 Sections 1050mm Long, Penta NC V2 Programme Control, 10 Tool ATC, CAT 40 Spindle, 11kw Power, Travels X Axis = 4000mm, Y Axis = 580mm, Z Axis = 700mm, Drilling Capacity 3 - 40mm, Drilling Speed Range 140 - 2300rpm, Rapid Traverse X = 24m/min, Y & Z = 7.5m/min, Table Width 560mm, Underside of Tool Holder to Table 700mm, Motor 7.5kw. S/No. 21-0156 (2021) Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dodjzr Ix Ajpfx Aa Hskt

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 Djdpfozyy Rmox Aa Hskt - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min • Table load: 4,000 kg/m² Dkedpexlip Ajfx Aa Het • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A • Tool changer: 24 positions • C-axis: ±360° • A-axis: +95° / -110°

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm tool taper SK 40 number of tool places 30+190 Pos. A-axis ° C-Axis 360 ° table surface area 800 x 630 mm table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 800 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled. Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable spindle speed - 5-axis simultaneous machining - Slant-bed coolant system SKM 1250 L - High-pressure coolant (IKZ) 70 bar - Coolant flush gun - Hydraulic clamping/unclamping on table via M-code (2 units) Dsdpfoyzt Dlox Aa Hjkt - Workpiece probe, M&H infrared probe - Heidenhain enclosed linear measuring system: Direct in X/Y/Z/A/C - Blum laser tool monitoring - Heidenhain 410 electronic handwheel - 2x LTA electrostatic air filters (Type AC 1000) - Internal machine flushing system Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2000, condition: excellent (used), As-new lock copy milling machine for PVC and aluminium profiles from a training workshop Key features: - 3-sided machining of sash and frame profile bars in a single clamping, e.g. for profile cylinders, handle holes, and lock cases - Equipped with 4 tracing pins for flexible and simple use of the template system - Convenient insertion of the profile bar without interfering milling units - Manual profile bar rotation device for 3-sided machining - Optimum machining quality due to the design-based use of short tools Dsdpfx Ajyrh Ncea Hskt Max. workpiece cross-section (W x H): 200 x 100 mm Milling area (L x W): 315 x 130 mm Plunge depth: 200 mm Speed: 12,000 rpm Drive power: 1.5 kW at 400 V Machine dimensions (L x W x H): 1260 x 820 x 1650 mm Machine weight: 340 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1995, As-new notching milling machine from a training workshop Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Dkedpfoyrh Rgjx Aa Het

Condition: new, 1 brand new universal milling head in standard or extended design for retrofitting to conventional, NC or CNC milling machines or drilling machines of any type, system "HURON," swiveling over 2 levels, any angle adjustable Mount: ISO 40 Reach: approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Weight in standard design: approx. 82 kg Accessories / Special features: Dkedpfedbny Ejx Aa Het • Tool clamping manually • The main spindle and all shafts and fittings are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing any setting angle! System "HURON" • Tapered fittings are ground according to the "KLINGELNBERG" system • The roller bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw Delivery time: approx. 12-14 weeks, after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, 1 brand-new universal milling head system "HURON" Manufacturer: EMENA Model: V 0, ISO 40, standard Technical data: Mounting: ISO 40 Overhang: 270 mm Nominal drive power: 5 HP Max. speed: 1800 rpm Weight: approx. 32 kg Dodpfxobpmv Ss Aa Hjkt Design: Standard, with adapter plate / mounting flange, head side finished, machine side unfinished, for subsequent installation on conventional, NC or CNC milling machines or drilling machines of any type, "HURON" system Option: - Adapter plate, head side fully machined, machine side with allowance for machining - Extended version Delivery time: approx. 3 months, after order receipt and payment Images are similar! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Dodpfjphl Ecsx Aa Hekt Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: used, Year of construction: 1992, functionality: fully functional, Vertical and Horizontal Milling Machine Manufacturer: EUMEGA, Type: MDV5 Dodey Tk R Tepfx Aa Hjkt Year of Manufacture: 1992 Technical Data: Manufacturer: Eumega Type: MDV5 Year of Manufacture: 1992 Table Size: approx. 305 x 1270 mm X-axis Travel: approx. 460 mm Y-axis Travel: approx. 500 mm Z-axis Travel: approx. 610 mm Spindle Speed: variable Tool Holder: SK 40 Total Power: 3.75 kW Dimensions (L x W x H): L 2000 x W 2,000 x H 2600 mm Weight: approx. 3 t All information is without guarantee. A demonstration can be arranged at any time in our showroom.