Used Film Development for sale (2,597)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, total length: 2,200 mm, total height: 1,230 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 180 mm, product height (min.): 10 mm, product length (min.): 200 mm, product length (max.): 1,000 mm, product width (max.): 630 mm, product width (min.): 200 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, energy consumption: 21 kWh, feed rate X-axis: 26 m/min, workpiece weight (max.): 10 kg, For sale is an AMTEC film packaging system, consisting of a vertical angle sealing machine SPEEDshrink 40XXL PRO and a high-speed POF-XL shrink tunnel. The system was factory-adapted for larger products and product weights up to 10 kg. The enlarged sealing frame and the reinforced conveyor drive enable the packaging of products up to 1,000 mm in length. Technical data and features: -Product dimensions according to special design: Length 200–1,000 mm, Width 200–630 mm, Height 10–180 mm -Sealing frame: 1,200 × 700 mm -Product weight: up to 10 kg -Conveyor speed: up to 26 m/min -Additional frequency converter for speed control of the conveyor belts -Stable four-column guide for the vertical sealing frame -Height and pressure of the sealing frame adjustable -Adjustable perforation module -Compressed air requirement: 6 bar -Connection power angle sealing machine: approx. 4 kW Shrink tunnel POF-XL High-Speed PRO: -For processing POF shrink film -Double air circulation with adjustable airflow -Tunnel dimensions: approx. 1,700 × 790 × 350 mm (L × W × H) Fodpfxj Ah Hvle Ag Tjgi -External dimensions: approx. 2,200 × 1,400 × 1,230 mm (L × W × H) -Electrical connection according to documentation: 380 V, 21 kW The machine is in good, fully functional condition and has been used only sparingly. The machine is ready for operation and can be inspected and demonstrated under power after prior appointment. A trial run is possible after consultation. If you are interested, we look forward to receiving your inquiry.

Condition: used, Year of construction: 2015, color channels: CMYK; optional white and varnish, total length: 4,660 mm, total width: 2,300 mm, type of input current: AC, input current: 20 A, Equipment: documentation/manual, We offer this used Canon Océ Arizona 460 GT MET digital printing machine, manufactured in 2015. Manufacturer: Canon Model: Océ Arizona 460 GT MET Year of manufacture: 2015 Condition: Used Machine type: Digital printing machine Océ Arizona 450 GT MET Serial number: 4100515 January 2015 Made in Canada Océ / Canon Arizona 460 GT – UV flatbed printer, manufactured in January 2015. An industrial UV flatbed printer for panels, signs, acrylic, glass, aluminum composite, PVC, wood, films, etc. Equipped with Roll Media Option / RMO. The machine can print not only rigid panels but also roll materials such as films, banners, vinyl, etc. According to the data sheet, the Roll Media Option can be retrofitted and can process flexible media without disrupting the flatbed workflow. Fgedpfx Ao Aibkmjg Tei Printing technology: Piezo inkjet with Océ VariaDot Printing area GT: approx. 1.25 × 2.50 m Max. speed flatbed: up to approx. 32.8 m²/h in express mode Production mode: approx. 20.3 m²/h Quality mode: approx. 14.0 m²/h Ink system: UV-curing inks, CMYK, optional white / varnish Weight: approx. 775 kg without Roll Media Option, approx. 1’025 kg with RMO Dimensions: approx. 4.66 × 2.0 m, with RMO approx. 4.66 × 2.3 m Power connection: 200–240 VAC, 1-phase, 16A / 20A depending on the mains frequency Operating environment: 18–30 °C, 30–70 % relative humidity The Arizona 460 GT is designed for high-quality signage and industrial printing: Typical applications: Application Examples Signage: Signs, boards, displays, POS/POSM Interior / Shopfitting: Direct printing on panels, glass, wood, acrylic Industry: Front panels, technical labels, series objects Trade fair construction: Panel printing, backlit graphics, presentation walls Films / Roll material: Roll Media Option available The machine uses Océ VariaDot technology with variable drop size. According to the data sheet, it can combine very small drops for fine details and larger drops for rich solid areas. Océ advertises this as providing near-photorealistic quality and readable text down to approx. 2 pt. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2020, type of input current: AC, input current: 12 A, Equipment: documentation/manual, We offer this used Mimaki CJV300-160Plus digital printing machine, manufactured in 2020. Manufacturer: Mimaki Model: CJV300-160Plus Machine type: Digital printing machine Year of manufacture: 2020 Fgodpfj Aiblrex Ag Toi Serial number: CD0CE 069 Input voltage: 100–120 / 220–240 V~ Input current: 12 / 8 A Mains frequency: 50/60 Hz Weight: 178 kg Short-circuit strength: 0.1 kA The CJV300-160 Plus is a 1.6-m print & cut eco-solvent printer. The maximum print/cut width is approximately 1,610 mm, and the maximum speed of the CJV300-160 Plus is up to 105.9 m²/h. Mimaki markets this device as a solvent/sublimation machine with print & cut functionality. The Plus version supports, among other things, ID-Cut/barcode workflow, Ethernet connectivity, Mimaki MAPS4, and RasterLink workflow. Typical applications Application | Suitable? Adhesives / Stickers | Yes Vehicle wrapping | Yes Window films | Yes Banners / Tarpaulins | Yes Posters | Yes Roll-ups | Yes Contour cutting of printed film | Yes Textile / Sublimation | Depending on the ink set / configuration UV printing on panels | No, for this, an Arizona / JFX / UV flatbed printer would be required. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Fgedpfx Aozznx Ieg Tei Year of construction: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / temperature testing chamber Vötsch VCS³ 7034-5 climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 7.0 K/min Temperature change rate, cooling: approx. 8.0 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range, temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface Cable entry 50 mm Cable entry 125 mm Test specimen protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Visual condition as shown in the pictures Fedpfez Akcfex Ag Tsgi Scope of delivery: 1x Vötsch VCS³ 7034-5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful check Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Fgsdezil R Repfx Ag Toi Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber, Li-Ion, CO/CO₂ -42 to +150 °C, 400 V, Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, type VC³ 4018/S, manufactured in 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring and CO₂ inertization to enhance operational safety. Important Note: Due to this safety equipment, the test chamber is software-limited to a temperature range of -42 °C to +150 °C. The chamber is ideally suited for: Li-Ion battery tests Fgjdozimfvjpfx Ag Tei Electronics and component testing Temperature and climate stress tests Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feedthrough installed as standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -42 °C to +150 °C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity in space: ± 0.5 to ± K Humidity deviation over time: ± 1 to ± 3 % RH Heat compensation: 400 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, motor manufacturer: SEW, Equipment: type plate available, Belt conveyor curve/ Curve/ Conveyor curve 90 degrees Manufacturer: Vanderlande Year of manufacture: 02/2023 Condition: As new Model/Type: Belt with grip band Overall outside length: approx. 3200 mm Overall inside length: approx. 1520 mm Overall width incl. motor: approx. 1550 mm Overall width excl. motor: approx. 1330 mm Conveyor width: approx. 1000 mm Inside radius: approx. 970 mm Material: Steel Color: Blue/Dark gray Including frame: approx. 300 mm high Including SEW motor (1.1 KW) Stock quantity: 5 pieces Price per piece Internal article number: 2026020204 Thanks to the excellent workmanship of the conveying technology, your material will glide smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers. Features: Fodpe Afz Tdefx Ag Tegi Condition: fully functional, with signs of wear Ideal for fast material transport Professionally dismantled and packed Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: type plate available, Belt conveyor / conveyor belt Manufacturer: VanderLande Year of manufacture: 2008 Condition: Used With pneumatic drive Overall length: approx. 3500 mm Overall width incl. motor: approx. 1180 mm Overall width without motor: approx. 800 mm Belt width: approx. 700 mm Divided into 3 sections 1x approx. 600 mm long 2x approx. 1250 mm long Conveyor height: approx. 850 mm - height adjustable Material: Steel Color: Gray Including SEW motor (2.2 KW) Including feet Stock quantity: 8 pieces Price per piece Article number: 2026012901 The conveyor system was operational until it was dismantled. Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packaged Fjdpfxs Afz Uhj Ag Togi Thanks to the excellent workmanship of the conveyor system, your material will glide gently to its destination, even under high load. Tailor-made solutions for your internal logistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as: logistics, pharmaceuticals, crafts or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or additional components such as picking racks or containers.

Condition: used, Wente CamSorik GmbH Laser measuring system / 3D laser measuring camera Wente CamSorik LaserCam_hs LC691103 Complete laser measuring system with tripod system, laptop, LaserCam_hs software, and documentation For sale is a used laser measuring system from the manufacturer Wente CamSorik GmbH. The system is suitable for non-contact measurements, 3D measurement technology, quality control, position detection, as well as industrial measuring and automation tasks. Technical data: Manufacturer: Wente CamSorik GmbH Model: LaserCam Type: LaserCam_hs Serial number: LC691103 Year of manufacture: 2018 Made in Germany Laser class: 2 Wavelength: 630–690 nm Fgjdez Ndq Hopfx Ag Toi Laser power: < 1 mW Standard: EN 60825-1:2007 Network interface: Ethernet (RJ45) IP address: 192.168.1.121 Dimensions of sensor unit (approx.): 620 × 240 × 240 mm (L × W × H) Total weight including accessories and tripods: approx. 28 kg Software / Laptop: Acer TravelMate laptop LaserCam_hs Version 7.2.10.555 Wente CamSorik GmbH LaserCam_high speed documentation available Equipment: LaserCam_hs sensor unit COLA receiver / transmitter LED ring light Ethernet interface Industrial connector 2 × Manfrotto professional tripods Acer laptop including power supply LaserCam_hs software Documentation Connection cables and accessories as shown in the pictures Application areas: Industrial measurement technology 3D measurement technology Quality control Robotics and automation Research and development Production monitoring Scope of supply: Wente CamSorik LaserCam_hs LC691103 2 × Manfrotto professional tripods COLA receiver / transmitter Acer TravelMate laptop including power supply LaserCam_hs software version 7.2.10.555 LaserCam documentation Connection cables and accessories as shown in the pictures Condition: Used Laptop and LaserCam_hs software have been started. Optical condition as shown in the pictures. Normal signs of wear and tear. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: ready for operation (used), Konica Minolta Bizhub C450i – equipped with PF216 finisher FS533 Tested and ready for use! Many units available. As an experienced retailer of used copiers, we have developed considerable expertise in packing and pallet shipping to ensure our customers receive machines in perfect condition. We ship copiers that originate from and are maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information. Fgodpfx Aoz E Rmtjg Tei

Condition: used, TIRA Climate simulation chamber / walk-in climate test chamber TIRA TCZ 4022 S -2K Air-cooled | -40 to +140 °C | Refrigerant R449A For sale is a used, walk-in climate simulation chamber from the manufacturer TIRA. The system consists of an insulated test chamber, an air handling unit, external humidification, a machine unit and a control cabinet. It is used for temperature and humidity testing. Technical data: Fodpfsz Sn Uvjx Ag Tjgi Manufacturer: TIRA Type: TCZ 4022 S -2K Cooling type: air-cooled Temperature range: -40 to +140 °C Temperature stability, supply air: over time ≤ ±0.5 °C; spatially ≤ ±1.0 °C Heating / Cooling: approx. 2 K/min each (-30 to +85 °C, without test item and thermal load) Climate range: +10 to +90 °C Humidity: 10 to approx. 95 % RH Dew point: +5 to +89 °C Humidity stability, supply air: over time ≤ ±2.5 % RH With heat compensation up to 16 kW: +15 to +80 °C; 15 to approx. 80 % RH Dew point: +10 to +74 °C Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm External dimensions: approx. 2660 x 6460 x 2800 mm Door opening (W x H): 2260 x 2260 mm Climate module KB 127: 1700 x 800 x 1400 mm Control cabinet: 800 x 500 x 2000 mm Power connection: 400 V, 3/PE/N, 50 Hz Rated power: 95 kW; Rated current: 150 A Fuse rating: 200 A, slow-blow Total weight according to specifications: approx. 5834 kg Equipment: Stainless steel interior and floor Double-wing door with viewing window approx. 1000 x 1000 mm Supply air at the top / exhaust air at the bottom on the rear wall Electric heating, direct cooling and dehumidification Bitzer 6G-30.2Y; Refrigerant R449A; Oil SEZ 32 Steam humidifier EDB 40 4 test chamber spotlights à 500 W Insulation: 80 mm PUR and 120 mm mineral wool Floor load: 15,000 N/m²; Wheel load: 1,500 N/wheel (≥ 4 cm²) Application areas: Temperature and climate testing Environmental simulation Material and component testing Quality assurance and development Condition: Used Optical condition according to pictures Scope of delivery: TIRA TCZ 4022 S -2K with associated components as shown in the pictures Items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), CQ 818 Metal Detector Optimized detector mechanics, true Variable Frequency technology, advanced electronics, and an improved, faster Auto-Learn feature provide significant performance improvements compared to the previous generation CQ-800 search heads. Even in challenging applications, such as detecting heavily metalized film products, high sensitivity can be achieved with Auto-Learn and the product can be inspected without requiring further optimization. Manufacturer: Guangdong Model: CQ 818 Aperture WxH: 495x150 mm Belt width: 445 mm Sensitivity: Fe ≥1.0mm / Non-Fe ≥ 1.8mm / 304 SUS ≥ 2.0mm Fjdpfxo Aax Tdo Ag Tegi Machine dimensions LxWxH: 1,620x920x940 mm Machine weight: 250 kg.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, type plate available, KEYENCE VHX-7000 Digital Microscope – 4K Camera System with 20–200x Zoom Fgedpfxj Af U H Ao Ag Toi For sale is a digital microscope system from KEYENCE, manufactured in 2023, in a high-quality design. The KEYENCE VHX-7000 system is suitable for demanding industrial applications in optical inspection, quality control, as well as surface and component analysis. The system features a swiveling 4K camera unit and a variable 20–200x zoom. Operation and image evaluation are performed via KEYENCE software. Technical data Manufacturer: KEYENCE Model / Designation: VHX 7000 S770E Software: KEYENCE System: Digital 4K camera system Camera: Swiveling Zoom: 20–200x Year of manufacture: 2023 Equipment and applications The system enables a detailed visual examination of workpieces, components, and surfaces. It is particularly suitable for use in industrial quality assurance, manufacturing, development, and failure analysis. The digital image display supports comfortable viewing and assessment of test objects. Thanks to the variable zoom and swiveling camera, the system can be flexibly adapted to different inspection tasks. Price and sale Selling price: €19,900 Lease takeover possible (lease ends 09/2027) If you are interested or have any questions, please do not hesitate to contact us. An inspection and demonstration of the system can be arranged by appointment.

Condition: used, This listing is for the APV Gaulin T Series Homogenizer The unit is in full working condition and is ready for immediate use The Gaulin T Series homogenizers, developed by SPX FLOW under the APV brand, are high-pressure, positive displacement reciprocating plunger pumps designed for demanding applications in industries such as dairy, food and beverage, pharmaceuticals, chemicals, and cosmetics. Fedpfx Aoxhf Tvog Tjgi Key Features High Pressure Capability: Models like the Gaulin 132T and 125T can handle pressures up to 600 bar (approximately 8,700 psi), making them suitable for applications requiring intense homogenization. Flow Rate: These homogenizers can process flow rates ranging from 1,000 to 25,000 liters per hour (LPH), accommodating various production scales. Design Options: The Gaulin T Series offers both mono-block and three-piece valve housing designs, allowing for flexibility in maintenance and customization. Hygienic Construction: Constructed with stainless steel or duplex materials, these homogenizers feature 3-A sanitary design, making them suitable for hygienic applications. Maintenance-Friendly: The design includes features like hydraulic valve actuators, easy access to key components, and modular electrical controls, simplifying maintenance and reducing downtime. Applications Gaulin T Series homogenizers are ideal for applications such as: Dairy Processing: Homogenization of milk, cream, and other dairy products. Food and Beverage: Processing of sauces, dressings, and beverages. Pharmaceuticals and Cosmetics: Manufacturing of emulsions, creams, and lotions. Chemical Processing: Production of paints, coatings, and other chemical products

Condition: used, This listing is for a Pall Allegro 50 L Standard Mixer and Weigh Platform. The unit is in full working condition and is ready for immediate release. The Pall Allegro 50 L Standard Mixer and Weigh Platform is a robust and versatile solution designed for single-use bioprocessing applications in the pharmaceutical and biotechnology industries. Engineered for consistent mixing performance, this system supports critical upstream and downstream operations including buffer preparation, media mixing, and formulation processes. This platform integrates high-precision weighing functionality with a reliable mixing system, offering enhanced process control in a compact, easy-to-clean stainless steel frame. Its compatibility with Pall Allegro single-use mixers ensures operational flexibility and sterility assurance across various applications. Key Features Integrated Design – Combines mixing and weighing in one streamlined system. Single-Use Compatible – Fully compatible with Pall Allegro 2D mixer bags. High Accuracy Weighing – Precision load cells for reliable mass control and batch documentation. User-Friendly Interface – Easy-to-use control panel with adjustable speed and mixing profiles. Hygienic Construction – Stainless steel frame with smooth surfaces for GMP compliance. Scalable Solution – Ideal for pilot-scale to small-scale commercial production. Technical Specifications Model: Allegro 50 L Standard Mixer & Weigh Platform Mixing Volume: Up to 50 liters Fgjdpoxl Dpdjfx Ag Toi Mixer Type: Magnetically driven impeller Platform Material: 304 Stainless Steel Weight Capacity: Up to 100 kg Dimensions (approx.): 600 mm x 600 mm x 1100 mm Power Supply: 100–240 V AC / 50–60 Hz Control System: Integrated touch screen interface Manufacturer: Pall Corporation Applications Biopharmaceutical Manufacturing – Media and buffer prep, formulation, and hold steps. Clinical Manufacturing – Flexible use in small-scale GMP operations. Vaccine Production – Sterile formulation and component mixing. Gene & Cell Therapy – Supports sterile, closed-system processing. Process Development Labs – Ideal for scaling up single-use technologies. Benefits Sterile Processing – Supports single-use bags to minimize contamination risk. Compact Footprint – Fits easily into lab and production environments. Accurate Dosing – Integrated weigh system for precise process control. Reduced Cleaning Time – No need for CIP/SIP due to disposable mixer bags. Pall Quality – Developed by a trusted leader in bioprocessing technologies.

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Fodepgkmwopfx Ag Tjgi Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The carrier unit allows the operation of a wide range of equipment, such as cone splitters, earth augers, root grinders, sweepers, rotary harrows, and much more. The equipment is developed and manufactured in Germany. Very robust roller bearings ensure that the forces are safely absorbed in both axial and radial directions. A large, high-performance hydraulic motor, type HMT500, provides the necessary torque for powerful and efficient operation, with up to 1600 Nm. Oil flow rate up to 125 l/min, pressure up to 210 bar, and speed of 240 rpm. Article no.: MTT500 Fgedpfx Aedf Sgrsg Toi Earth augers, drill cones, and other tools are available on request for an additional charge. Quick-change mounts MS 01 - MS03 - MS08 or other adapters are also available on request and for an additional charge.

Year of construction: 2026, condition: new, Sandblasting cabinet for clean blasting operations without contaminating the working environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Fgedpfxocqm Rro Ag Toi Dust-free operation due to all-round seals on the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With compressed air connection on the outside. 2 large side doors for loading and unloading from both sides, even for longer workpieces. Integrated extraction system with replaceable air filter. Airflow is controlled via a foot pedal. 2 blasting guns: one fixed and one freely movable blasting gun. 3 separate switches for on/off, extraction, and cabinet lighting. 2 fluorescent tubes (230 volts), in a separate housing with a protective screen and replaceable protective film, including 5 replacement films. Working pressure is regulated via a pressure regulator with a pressure gauge. Scope of delivery: High-quality blasting gun with ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Working cabinet volume: 310 l Air consumption: 200 - 350 l/min Working pressure: 2.8 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 945 x 605 x 605 mm External dimensions: 960 x 900 x 1640 mm Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Year of construction: 2026, condition: new, Sandblasting cabinets for clean blasting operations without contaminating the work environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to seals around the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With a compressed air connection on the outside. Very large, upward-opening front flap with gas springs for quick and easy loading and unloading. Integrated extraction system with a replaceable air filter. Blasting gun without finger trigger – airflow is controlled via a foot pedal. 4 fluorescent tubes (230 volts) in a separate housing with a protective cover and replaceable protective film, including 5 replacement films. 2 separate switches for extraction and cabinet lighting. Adjustment of the working pressure via a pressure regulator with a pressure gauge. Crossbars on the base allow for easy transport with a pallet truck. Scope of delivery: High-quality blasting gun with a ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Volume of work cabin: 825 l Air consumption: 400 - 800 l/min Working pressure: 3.4 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 1160 x 870 x 850 mm External dimensions: 1180 x 900 x 1760 mm Fedscqm Rwjpfx Ag Togi Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Fodpfozd Az Ajx Ag Tsgi Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VC 4034 Climate testing chamber Temperature and climate testing chamber, air-cooled Converted to R452A For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Equipment type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg net Temperature range: -40 °C to +180 °C Temperature change rate, heating: approx. 3.2 K/min Temperature change rate, cooling: approx. 3.5 K/min Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity, spatially: ± 0.5 to ± 1.5 K Climate range, temperature: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatially: ± 0.5 to ± 1.0 K Refrigerant: R452A Refrigerant quantity: 2.5 kg Maximum suction pressure: 22 bar g Maximum discharge pressure: 25 bar g Mains connection: 3/N/PE AC 400 V +10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side feedthrough Insert grid Air-cooled system Documentation / Operating manual Accessories according to the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Fgjdpfezd Dm Hjx Ag Tei Condition Used Optical condition according to the pictures Scope of delivery 1x Vötsch VC 4034 Climate testing chamber Insert grid Control panel / controller Documentation / Documents Accessories according to the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Item description: For sale is a HAAKE RheoStress 6000 rotational rheometer from Thermo Scientific – a highly precise measuring instrument for the rheological characterization of various materials. Ideally suited for use in research, development, or quality control. However, the device is not operational as the air bearing is defective. Technical specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 min⁻¹ Speed range (CS mode): 10⁻⁷ to 1500 min⁻¹ Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special features: Very high measurement accuracy due to low inertia Precise lifting mechanism (0.5 µm setting accuracy) Modularly expandable (High Shear, RheoAdaptive Control) Compatible with various thermostats Scope of delivery: HAAKE RheoStress 6000 base unit Power cable Software Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Fjdpfx Aszia Iweg Tsgi We will be happy to answer any further questions you may have over the phone.

Condition: used, Julabo Julabo Immersion cooler CT 72/P incl. ED thermostat Fgjdpfxjzix Dqo Ag Tei Item description: For sale is a Julabo immersion cooler CT 72/P with a Julabo ED (v2) temperature controller. The unit comes from a laboratory stock and is in used, but technically functional condition. The cooler heats and regulates the temperature stably; circulation is available (see photos). Ideal for laboratories, industry, education, experimental technology, or development. Technical data (excerpt): Manufacturer: Julabo Labortechnik GmbH (Made in Germany) Model: CT 72/P with ED thermostat (v2) Temperature range: approx. +10 °C to +60 °C Temperature stability: ±0.02 K Heating power: 2000 W at 230 V Circulation pump: Flow rate approx. 15 l/min Bath volume: approx. 18 liters Bath material: Acrylic glass / Stainless steel Interface: RS232 Power connection: 190–253 V / 50–60 Hz Protection class: I / IP20 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Binder Type: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven for professional use in laboratories, industry, and research. Device description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The device is specifically designed for applications involving flammable solvents and meets high safety requirements (ATEX version). Due to the precise control of temperature and pressure, the device is ideally suited for reproducible laboratory and industrial processes. Typical applications: Chemical and pharmaceutical laboratories Research & development Quality control Industrial drying processes under vacuum Temperature / Vacuum: Temperature range: +9 °C above ambient to approximately +110 °C Final vacuum: up to approximately 0.01 mbar Electronic temperature and pressure control Equipment: Safety glass pane with splinter protection ATEX-compliant design Several insertion levels (number depending on the configuration) Connections for vacuum and inert gas Dimensions: Internal volume: approximately 115–119 liters Internal dimensions (W × D × H): approximately 506 × 460 × 506 mm External dimensions (W × D × H): approximately 743 × 581 × 942 mm Electrical data: Rated power: 1.90 kW Mains connection: 230 V / 1N~ Current consumption: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Rated temperature: 200 °C Temperature protection: DIN 12880, Class 2.0 Weight (empty): approximately 158 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) Fgsdpjziyymefx Ag Tji (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.