Used File Paternoster for sale (628)

Year of construction: 2010, condition: used, Manufacturer : GEA Niro Soavi S.p.A. Model : NS 2006 H Version : ARIETE Year : 2010 Type: Laboratory piston homogeniser Execution : SANITARY Hodpfxsyyq E De Akiow Special features: FDA-compliant + electropolished (Ra < 0.5 µm) + cGMP-compliant   Number of Plungers: 2 Plunger material: CERAMIC Plunger diameter: 10 mm Plunger stroke: 40 mm No. of Stages : 2 Type of Control : HANDWHEEL Maximum pressure: 1500 bar Maximum viscosity: 500 cP Maximum temperature: 140 °C   Main motor power: 5.5 kW Speed: variable Min. flow rate: 17.5 L/h Max. flow rate: 35 L/h   Heat exchanger with no cross-flow Power cabinet + control panel Complete technical file

Condition: used, Year of construction: 1974, Manufacturer: Grenier - Charvet Model: E 35 Year: 1974 ( Compliance file dated 2001) Type : High viscosity paste mixer   Motor power : 35 CV - 25 KW Speed variation: mechanical Previous use : Paint tank 1160 L and 440 L Agitation tool: Ø 1260 mm butterfly/clover type (Ø 950 mm possible) Vessel clamping: pneumatic   Vertical movement: hydraulic unit Height in low position: 2770 mm Height in high position: 4070 mm Stroke: 1300 mm   Hedpfx Aex R A Acskijw Technical file available

Condition: used, Year of construction: 2011, Manufacturer : Packo Inov NV Type: Cryofreezer / Batch freezer Year of manufacture : 2011   Total volume : 950 L Dimensions : 150 x 120 x 230 cm Supply voltage 3x400V + N – 50Hz Minimum temperature set point: – 120°C Weight : 600 Kg Materials: 304 L stainless steel Full technical file: available in digital version Refrigerant : Liquid nitrogen   Previous use: 0.5 or 1L bottles containing Biological active ingredient. 0.5L bottle : o Dimensions: 72 x 72 x 180 mm (WxDxH) o Maximum capacity: 32 bottles 1.0L bottle : o Dimensions: 90 x 90 x 220 mm (WxDxH) o Maximum capacity: 32 bottles   Hsdpfxox R A Apo Akiew

Condition: good (used), Year of construction: 2005, Manufacturer: Hazemag Type: AP-KH 1006 Rotor Dia. x W: 1.000 x 670mm. Inlet size: 690 x 350mm Included: – 55 KW E.motor – Control-cabinet – Hydraulic unit Hsdpowu Urdjfx Akisw – Frame New Spare-parts in stock. See PDF-file below for more detailed information.

Condition: new, Year of construction: 2025, neu 2025 080091 prompt, Zwischenverkauf v Türkei 51120 € 781.19 € 1 40900 € 60 to 2550 mm Y1 / Y2 und X Achse Hjdpfewva Igjx Akijw 160 mm 2150 mm 250 mm 350 mm hydraulisch 120 mm/s 9 mm/s 70 mm/s 620 (mit optionaler R-Ach mm 250 mm/s 813 mm 104 mm 100 l 5.5 kW 3250 mm 1200 mm 2350 mm 4250 kg Special price for demo machine Like-new condition 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH (sample photo shows mod. PBF 30200) OPTIONS: CNC controlled R-axis (adjustment range in X = 500 mm) DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Year: 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Hsdjwdgfzopfx Akiow

Condition: good (used), Unique large format copier, multifunction printer, color plotter and scanner 2 rolls 914mm (36”) 4 colour dye/pigment ink 160 GB hard drive Copy, print and scan in color and black & white with this large format printer. The Océ ColorWave 300 2nd edition adds productive featuring to the proven Océ ColorWave 300 concept. The Océ ColorWave 300 wide format all-in-one printer saves floor space thanks to its integrated color scanner. The unique Top Delivery Tray stacks large format documents neatly on top of the system. The powerful controller effortlessly processes all your color and black & white technical document tasks. Take the jump to one with the Océ ColorWave 300 large format printer. Save floor space with one compact large format printer for all color and black & white tasks Save collation time and floor space with the unique Top Delivery Tray for stacking large format documents on top of the system Eliminate waste and faulty copies. Océ Image Logic ensures first-time-right results for wide format color scanning and copying Increase productivity by fast file processing of all file formats: HP-GL/2, DWF, JPEG,PDF and many more More production power with the integrated online fanfolder or fullfolder One for all: large format copier, color plotter and scanner As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet/ container shipping, to guarantee our customers machines in perfect condition upon receipt. Our company offers the largest range of production copiers, and handle world-wide deliveries on request. Hjdpfxshukmis Akiew Please do not hesitate to contact us for further information.

Condition: like new (used), Manufacturer: Löhnert / Berger Type: SKM 20 Electrical Motor: Included See PDF-file below for more detailed information. Hjdpeg Snrxsfx Akisw Will be sandblasted and painted.

Condition: good (used), Manufacturer: Sandvik / Aubema Type: 1712 / 10 Year of Manufacture: 1999 Mach. No.: 8519 Hsdpfx Akog Stt Rsijw Rotor Dia.: 1.200mm Rotor Width: 1.000mm Electrical Motor: Included See PDF-file below for more detailed information.

Condition: used, Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 12.5 x 20 Hjdpfxohagpkj Akijw -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 125 mm -Grinding length: 200 mm -Length of main body: 150 mm -Mounting hole: 25 mm -Number: 1x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Condition: good (used), Manufacturer: Thyssen / Krupp Type: KHP 130 /125 Electrical Motor: Included (200 kW) Rotor diameter: 1.300mm Rotor width: 1.250mm Inlet: 1.370 x 990mm See PDF-file below for more detailed information. Included: – Inlet – Hydraulic system to open New spare-parts in stock. Hodjg I R Rujpfx Akiew

Condition: used, Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 20 x 25 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 200 mm Hjdpfxsb A S N Uj Akiow -Grinding length: 200 mm -Length of main body: 250 mm -Mounting hole: 30 mm -Number: 2x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Condition: used, Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 7.5 x 20 Hsdpfx Akjb A S Rkoijw -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 75 mm -Grinding length: 150 mm -Length of the body: 200 mm -Location hole: 25 mm -Number: 3x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Condition: used, Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 20 x 25 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 200 mm -Grinding length: 200 mm -Length of main body: 250 mm -Mounting hole: 30 mm -Number: 1x available Hsdpfjb A S Rnox Akijw -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Condition: used, Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 12.5 x 15 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 125 mm -Grinding length: 100 mm -Length of main body: 150 mm -Mounting hole: 30 mm -Number: 5x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm Hedpeb A S Rqsfx Akiew also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Condition: used, Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 15 x 25 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 150 mm -Grinding length: 200 mm -Length of main body: 250 mm -Mounting hole: 30 mm -Number: 1x available -Price: per piece Available on request in other sizes: e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file Hedpfx Asb A S Rwokiew

Condition: refurbished (used), Year of construction: 2015, operating hours: 180 h, functionality: fully functional, machine/vehicle number: H5KS, Universal testing machine, type H5kS Extended version by 254 mm With 5KN 500N load cells, screw-type clamping device up to 5kN, and Windows 10-11 software For tensile, compressive, bending, and shear testing, etc., in accordance with EN ISO 7500-1, ASTM E4. The H5kS is a universal testing machine designed according to the latest standards. The machine operates in accordance with the relevant EU radiation protection and safety guidelines (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage within the machine is 48 volts. Special features: • Large, easy-to-read liquid crystal display with backlight • Graphical or numerical display mode • Alphanumeric file input • Speed range 0.001 to 1000 mm/min (2.5kN) • Speed range 0.001 to 500 mm/min (5kN) • High return speed 0.001 to 1500 mm/min • Precise crosshead positioning • Robust load frame • Output of test results with mean value and standard deviation via printer • Wide selection of testing software under Windows for various standards • RS232 interface for use with computer systems • Accuracy of the force display of the load cell: 0.5% across the entire range • Accuracy of the displacement display: 0.001 mm • Equipped with a force and displacement alarm system Hodpszt S Hmjfx Akiew • 32-bit motor controller • 20% digital weight adjustment during calibration of the load cell capacity • Automatic motor alarm for over- or undervoltage and overheating Specifications: • Force measurement accuracy: +/- 0.5% of the displayed force in the range of 2% to 100% • Accuracy of position measurement: +/- 0.01% or 0.001 mm • Accuracy of speed: +/- 0.005% of the selected speed • Operating temperature: 0 to 38°C • Humidity range: 10% to 90% Technical data: • Single-column table model • Maximum load: 5kN in tension and compression • Maximum travel: 1004 mm without clamping device • For further details, please refer to the brochure. Dimensions: Height: 1394 mm Width: 490 mm Depth: 450 mm Weight: 102 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Year of construction: 1983, condition: used, Manufacturer: Manesty Hodpozg Nfysfx Akiew Model: Accela-cota 150 Year : 1983 Type: film and sugar coating unit Technical file available Classification: ATEX EEx (to be requalified) Coater Useful volume: approx. 170 L Maximum weight: 150 Kg Diameter of drum: 1219 mm / 48″. Rotation speed: 2.5 – 15 rpm Cabinet with frequency converter Air treatment unit Air volume: 2890 m3/h Temperature : 0-80°C Steam pressure : 2 – 5 bars Steam consumption : 145 kg/h Fan motor power : 0.75 KW Fan (not original) Power : 17,5 KW

Condition: new, functionality: fully functional, New Danfoss VLT 5011 – Type VLT 178B0457 1 unit in stock We have a wide range of Danfoss frequency converters available, including this type: VLT 5011 178B0457. Hodpfx Akjztb Iajiew With this advertisement, we have included an overview with photos. Additionally, it is possible to request extra photos of a specific component. Please feel free to send us a message for this. A PDF file has also been added, containing an overview of all Danfoss parts that we currently have in stock. Do you have any questions or are you looking for a specific Danfoss part? Please do not hesitate to contact us. We will be happy to assist you.

Condition: used, Year of construction: 2018, total height: 8,950 mm, Automated warehouse optimization storage system KARDEX Shuttle XP250 System Type: SHUTTLE-XP-250-3050x864 Control: Logicontrol, with color touchscreen display Serial No.: 18001465/001 Year of construction: 2018 Load per tray: Medium: 205 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 8950 mm (height of Kardex is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum tray capacity: 32 trays, Medium: 205 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 x 8950 mm - Footprint of the system approx: 10.39 m2 - Capacity with 32 trays: approx. 84 m2; each tray is approx. 2.64 m2 Hedpfxozuvq Es Akiew - Electronic volume measuring system with 25 mm grid - An access opening with sliding doors to protect people and stored goods - Logicontrol, with color touchscreen display - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking Price: upon request, via email only Price: excl. VAT, including transport, installation, and warranty Delivery time: in stock Machinehandel De Leeuw BV is one of the few companies in Europe that deals with and has in stock primarily used Kardex Remstar VLM automatic lift & rotating warehouse systems. See our website for current stock. We safely install and/or dismantle these systems with VCA-certified technicians, and we have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), Year of construction: 2022, operating hours: 798 h, functionality: fully functional, machine/vehicle number: S102221332GKBCP, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 28 m/min, feed rate Y-axis: 28 m/min, feed rate Z-axis: 28 m/min, torque: 74 Nm, total height: 2,564 mm, total length: 3,264 mm, total width: 2,930 mm, overall weight: 2,850 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 98 h, spindle nose: SK 40, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HURCO VM10i A vertical machining center in compact format, in almost new condition. !!! 98 operating hours of the spindle !!! Work area Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniformly distributed) (kg) 1500 Travel X-axis (mm) 660 Y-axis (mm) 406 Z-axis (mm) 508 Feed rate Rapid traverse X-axis / Y-axis / Z-axis 28 / 28 / 28 Main spindle Spindle taper (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Hodpfx Akez Ei Amjiew Tool changer Magazine slots 24 Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Includes coolant tank (62 liters) and chip conveyor, as well as extensive accessories (machine vises, chucks, software for processing DXF files). An inspection is possible at any time. The Hurco is currently still connected and can be tested.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC vertical glass processing centre with waterjet Hodpfxsz Syvxj Akisw Working direction: from left to right Max. glass size: 6000 x 3300 mm Min. glass size: 600 x 200 mm Glass thickness: 3 - 25 mm Max. grinding speed: 25 m/min Line consists of: - Vertical CNC glass working centre SYSTRON proHD 6033 (year: 2016), - High-pressure waterjet pump THYSSENKRUPP HPS 4037, - Vertical glass washing machine LISEC VHW-33/V8 (year: 2011). Types of processes: - Grinding (inner and outer contours), - Polishing (inner and outer contours), - Drilling/counter-sinking/milling (by waterjet), More technical information can be found attached as Tech. data file Very good and clean condition Good working order, still in production As is Available in December, 2026

Condition: new, functionality: fully functional, Year of construction: 2026, MTP 3000 W handheld laser cleaning machine – Metal Technics Polska Remove rust, paint, oil, oxides and coatings in seconds – with no abrasives, no chemicals and no damage to the base metal. The MTP 3000 W is a mobile continuous-wave fibre laser cleaning machine with a handheld cleaning gun, built for workshops, metal fabrication, tool and mould shops, restoration and pre-weld surface preparation. KEY ADVANTAGES • 3000 W laser power for fast cleaning of large surfaces • Dry, contactless process – no consumables, no blasting media, no waste chemicals • Cleans rust, paint, oil, oxide layers and fouling without damaging the parent metal • Works on cast iron, carbon steel, stainless steel, die steel and aluminium • Colour touchscreen with selectable scanning (swing) mode, red guide light and laser control • Key switch, emergency stop and dedicated Power / Light / Control / Laser / Beam buttons • Fibre laser source with armoured fibre cable and lightweight handheld cleaning gun with protective lens • Compact cabinet on four castor wheels – easy to move around the workshop TYPICAL CLEANING PERFORMANCE (manufacturer data) Hedpsz Izlrjfx Akiow • Cast iron, severe corrosion (0.08 mm): focus depth >35 mm, 18–30 m²/h • Carbon steel plate, moderate corrosion (0.05 mm): >40 mm, 15–24 m²/h • Stainless steel plate, oil stains and slight rust: >50 mm, 18–30 m²/h • Die steel gear, oil with iron filings: >45 mm, 14–23 m²/h • Aluminium plate, oxide / surface fouling: >35 mm, 12–20 m²/h • Paint removal, baked white varnish (0.1 mm), no putty layer: >20 mm, 18–30 m²/h Condition: new, year of manufacture 2026. Power supply: 400 V or 230 V – available in either version. Availability: made to order, delivery lead time 90 days. Terms: EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Documentation and manual included. Delivery to any address in Europe can be arranged with our own transport company – delivery quote on contact. Technical advice and after-sales support from Metal Technics Polska.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 6582016004, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Detailed information about the machines is provided in the attached file. Hedpfx Akjztxtajiow

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SA106560, overall weight: 7,500 kg, total width: 2,970 mm, total length: 3,460 mm, total height: 2,200 mm, spindle diameter: 350 mm, type of input current: three-phase, space requirement length: 7,000 mm, space requirement width: 5,000 mm, milling spindle length: 600 mm, space requirement height: 2,600 mm, length stop: 3,400 mm, input voltage: 380 V, There are two separate machines that can operate independently from each other but also work together. We only produce windows on the SAC F30; for doors, we use the FS.05 and the F30 together. We also have a tooling set that can produce window profiles in four thicknesses: 58/68/78/88 mm and, optionally, 108 mm, from the Italian manufacturer Fantacci. It comes with a large number of spare cutting plates. All digital and paper drawings are available with order numbers for the spare cutting plates, etc. New blades can be easily ordered from Fantacci in Italy. Dust extraction pipes are included, along with pneumatic valves and automatic control. Additional software with unlimited time access allows you to design a window, door, or sliding door and send the production file directly to the machine. Hedpfxozq Sr Rs Akiew All information about the machine, including electrical/pneumatic layout drawings, a spare parts catalog, etc., is available. The machine will be available from 08/2026. You can see the machine in operation at our facility until 20.08.2026. If you are interested, we will provide additional information on how the machine works (1-2 days of training). You will need to arrange the transport yourself, but we will load the machine onto the truck. Prices are exclusive of VAT. SAC F30 2-4 angle machine = €40,000.00 SAC FS.05 drilling machine = €14,000.00 (If both machines are purchased together, the combined price is €50,000.00) Cutting tool set, including spare cutting plates = €8,500.00 Dust extraction with automated pneumatic valves is included free of charge, as is the Ramasoft software license.