Used File Paternoster for sale (627)

Year of construction: 2007, condition: ready for operation (used), A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible. Fedsyiflgopfx Afnopc

Condition: ready for operation (used), Year of construction: 1991, A roll paternoster ESKA storage and loading system is available. Roll width: 1600mm, max. load capacity: 2800kg, total height: 4300mm. Documentation available. An on-site inspection is possible. Fedpfx Aow I E Dcsfnjpc

Condition: good (used), Stacking boxes, stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, Euro stacking containers, small load carriers, storage boxes, shelf boxes -6620x Storage bins: various sizes -771x storage bins Dimensions: 550/174/H110 mm -3483x Storage bins Dimensions: 175/135/H110 mm Fpjdpfodqc Hwex Afnoc -2112x storage bins Dimensions: 275/175/H110 mm -30x storage boxes dimensions: 138/86/H110 mm -172x storage bins Dimensions: 174/136/H96 mm -56x storage boxes dimensions: 274/174/H96 mm -Sale: only complete

Condition: used, Year of construction: 1989, Gewinner Euromat Type: Gewinner Euromat Machine No.: 120-50508-18 Year: 1989 Machine height: approx. 5600 mm Machine width: approx. 3300 mm Machine depth: approx. 1450 mm + 330 mm table top Number of trays: 18 Tray width: approx. 2450 mm Fpsdpfeya Dklox Afnsc Tray depth: approx. 520 mm Tray height: approx. 500 mm Compartment load capacity: 510 kg Total load capacity: 9100 kg Colour: Beige front / corners blue

Condition: good (used), Year of construction: 2014, Manufacturer: Hänel Type: Lean Lift Year of manufacture 2014 Device dimensions: Fsdpfsvt Euzjx Afnepc H 6302mm approx. W 2805 mm D 2810 mm Shelf 40 pieces up to 400kg per container H 57mm D 825mm W 2460mm Total load: 40,000kg (2×20,000kg)

Condition: ready for operation (used), optionally in combination with an oval riveting machine of the same brand/age; see our other advertisement Fjdox Nfhlopfx Afnepc

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, bar length: 3,000 mm, bar diameter (max.): 65 mm, Caricabarre top X-Files 65 year 2021, semi-new and fully functional in excellent condition, complete with grapples. Fedpfx Ajw Dur Asfnjpc

Condition: good (used), Year of construction: 2017, Flexifill SA1 Filling machine Serial: FLX234 2017, Stainless, Typical output filling 4litres per second, with flow meter, previously used for filling 200l drums Fodpsxfbqrofx Afnopc

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Designed for warming components, equipped with a carousel handling system and control cabinet. Also suitable for drying or dehydrating food and cannabis. The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Fedoup R U Uepfx Afnepc Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Condition: used, Year of construction: 2004, The used TOP AUTOMAZIONI X-FILES automatic bar feeder is a valid alternative to the more traditional bar pusher for performing unattended bar machining on production CNC lathes. Fpedpfxox Nqi Io Afnoc Multilayer, year of manufacture 2004, CE compliant; maximum bar diameter: 75mm maximum bar length: 3300mm

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Fedpfx Afehfxkaenjpc External dimensions: Height 6,010 mm Width 3,501 mm Depth 1,774 mm 25 carriers with a payload of 628 kg each In the clear usable dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Storage table at 1,000 mm above floor level with worktop / plastic surface Light gray color, surface cleaned, signs of wear possible Motor power: 1 x 5.5 kW / 400 volts Other extras: Automatic chain tensioning, Various intermediate shelves Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Year of construction: 1996, condition: good (used), For sale we offer a used Kardex/Paternoster. technical features: Length 3.400mm width incl. tray 1.960mm width without tray 1.650mm Fpsdpfx Aekuyk Aefnsc Height: 6.200mm Compartments: Length: 2.950mm Width: 620mm Height: 110mm If you are interested, please contact us.

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. Fodpfjff Huwox Afnepc • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each with clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch 254 mm Fpedpednfdljfx Afnjc Storage table at 1000 mm above floor level with wooden worktop Color: GRAY, surfaces cleaned, signs of wear may occur Motor power: 1 x 1.8 kW / 400 volts Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: good (used), Year of construction: 2002, A-3900-Trepko-DoubleCup-fillingmachine Trepko filling machine for cups type 106 K.S. (P) Fodpfxjd Iytxe Afnspc Year of production: 2002. Capacity 10.000 pieces/hour Cup dimension Ø95 2 pieces of tools Can work with double tools/cups (see photos) CEE machine, incl. complete electrical documentation and Mechanical documentation. Robot packing machine and other equipment can takes with that. Sale complete line: Spoon applicator. Case erector Norway. Robot for stacking in cartons. Palletizing. Stationed: Denmark Can be take from function Juni 2019.

Condition: new, Year of construction: 2023, The conveyor is from 2023, new and unused. We offer 1 year warranty. Fedpfx Aolkda Hjfnopc Side panels can be added later. For examples see pictures.

Condition: ready for operation (used), The conveyor belt of the company Engel is for sale Length : 3000mm Useful width : 400mm Höhenverstellbar: 1000mm-1250mm 2 swivel castors with brake 2 locking casters Fpodpfx Afjm E I Rljnec

Condition: good (used), Year of construction: 2013, The conveyor belt of the company trio-technik is for sale; Fedpfx Afjm E U T Tonopc length: 4500mm Useful width: 680 Height adjustable 850-1150mm Motor protection with 5 meter cable Belt speed constant: 6m/min

Year of construction: 2003, condition: good (used), Type: TLI 4500/2044 Device no.: 03502 Year:2003 unit height: approx. 4500 mm unit width: approx. 2000 mm unit depth: approx. 7010 mm Number of rolls: 44 Roll width: approx. 1680 mm shelf load: 150 kg Total load: 7000 kg superstructure see photo 3000 mm Fsdpfxjhyhlke Afnspc Color: beige

Condition: good (used), Year of construction: 1990, Kardex vertical carousel shelving Type: Kardex Device no.: not legible Year: 1990 Device height: approx. 5,920 mm Device width: approx. 3,010 mm Device depth: approx. 1,250 mm + 300 mm tabletop Fodpfx Afew E Hh Ejnspc Number of trays: 40 Tray width: approx. 2,500 mm Tray depth: approx. 400 mm Tray height: approx. 235 mm Compartment load: 250 kg Total load: 10,000 kg Color: White

Condition: good (used), Year of construction: 2003, Kardex carousel Type: SYS-120-1414 Device no.: 03001086/001 Year of manufacture: 2003 Rack height: approx. 3110 mm Unit width: approx. 2950 mm Unit depth: approx. 1150 mm + 300 mm table top Fpedpsq I R D Nofx Afnec Number of shelves: 14 with 7 additional drawers Shelf width: approx. 2630 mm Shelf depth: approx. 320 mm Shelf height: approx. 330 mm Shelf load: 100 kg Total load: 1400 kg Color: white

Condition: good (used), Year of construction: 1990, Megamat carousel rack Fpedpjv Ewn Dsfx Afnsc Type: 112-350-13 Device number: 7479 Year of manufacture: 1990 Device height: approx. 2950 mm Device width: approx. 2675 mm Device depth: approx. 1130 mm + 280 mm table top Number of shelves: 13 Shelf width: approx. 2160 mm Shelf depth: approx. 295 mm Shelf height: approx. 330 mm Shelf load: 100 kg Total load: 1,300 kg Color: beige

Year of construction: 2012, condition: good (used), Type: IND-PA Device no.: 0/1220744/1 Year: 2012 unit height: approx. 5600 mm unit width: approx. 2870 mm unit depth: approx. 4000 mm number of rolls: 45 Roll width: approx. 2370 mm Fsdpohyhlgsfx Afnepc shelf load: 200 kg Total load: 9000 kg Color: beige

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 30,629 h, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, product height (max.): 20 mm, Laser cutting machine including paternoster! Machine serviced by manufacturer in 2023! LASER CUTTING MACHINE TECHNICAL DETAILS Laser Laser power: 4,000 W Peak power: 500 W Laser source: FANUC AF 4000 E Fodpfx Asxc E Dqsfnepc Principle: c2-laser (AC-HF) Laser wavelength: 10.6 µm Laser stability: +/- 1 % Laser consumption: approx. 10 l/h Travel Range and Cutting Parameters X-axis travel: 3,070 mm Y-axis travel: 1,550 mm Z-axis travel: 200 mm Table load: 850 kg Material thickness (mild steel ST 1203): 20 mm Cutting speed: 0 to 20 m/min X-axis travel speed: 80 m/min Y-axis travel speed: 80 m/min Simultaneous axis: 113 m/min Z-axis travel speed: 60 m/min Control system: GE Fanuc Series 160 I-LW MACHINE DETAILS Operating hours: 30,629 h Dimensions & Weight Dimensions: 8,000 x 3,400 x 2,400 mm Weight: 16,000 kg EQUIPMENT Documentation/manual Cooling unit Safety light barrier Dry separator Keller L-CUT Transformer RIEDEL PC 315.21-ME LAS PATERNOSTER TECHNICAL DETAILS Maximum sheet weight: 3,000 kg Sheet thickness: 1 to 20 mm Maximum sheet size: 3,000 x 1,500 mm Minimum sheet size: 150 x 150 mm Lifting traverse load capacity: 3,000 kg MACHINE DETAILS Dimensions & Weight Dimensions: approx. 6,400 x 5,000 x 8,000 mm Weight: approx. 8,000 kg EQUIPMENT Loading bay Unloading platform Lifting traverse Pallet changer Vacuum traverse

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately. Fedpfjwclkyjx Afnopc