Kolbus case maker DA 260 (2011)

Kolbus DA 260

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 123, We are selling a fully functional Kolbus DA260 casemaking machine. The machine has approximately 12 million cycles. It comes with a CD containing the software. Testing of the machine in production is possible by arrangement. Itedpoyw Tc Tefx Aifeg

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. Isdpjuf Sy Aofx Aifjtg 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 483, Casemaker, Automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Co-Pilot with touchscreen, Automatic case counter, Board magazine for manual loading, Centre strip infeed (flexible), Waste chopper, Cloth feeder, Glue unit, Preheated glue tube, Viscosity control, Device for inside lining with hotmelt, Device for producing padded cases, Pressing station, Tacking delivery. Itsdpfx Aex Ryr Isifog

Condition: used, Large Size Sewing machine Meccanotecnica Aster 2000/51 Fadenheftmaschine - Sewing machine Meccanotecnica Aster 2000/51 Year 1997 - Serial-No. 115208 Itjdjydfhyjpfx Aifjg Pre-loader Meccanotecnica Sistema Large Size  Opening device (4+4) Sheet control Sewing device, Transport chain Thread cutting device Delivery and Plus Stacker with roller conveyor belt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Kolbus casing in with joint forming by Smyth After general renovation at GM Gross. Still in production Itsdpfxewm E Rnj Aifsg Format / size 100x125mm - 260x350mm Book block thickness / Book block thickness 4-60 mm capacity from 500 -800 blocks per hour

Condition: good (used), Year of construction: 2006, This is a well-maintained folding machine from 2006 for sale, 6 pockets 2 swords. Available from 12/24 Iedpfx Aieu Ah Dbefetg

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Isdpfjl Txw Hjx Aifstg Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: used, Year of construction: 2005, Horizon brochure production line consisting of: VAC-100 vacuum collating tower (2 units) SPF-20A stapling and folding module Isdpfxoxpv Ado Aifstg FC-20A front trimmer Technical data: Horizon VAC-100 – vacuum collating tower Function: Collating printed sheets Number of stations per tower: 10 (20 in total with 2 towers) Paper format: min. 120 × 148 mm, max. 350 × 500 mm Paper weight: 52–208 g/m² (up to 300 g/m² in some cases) Stack height per compartment: 55 mm Production speed: up to 9,900 sets/hour Control: touchscreen control panel Horizon SPF-20A – Stapling and folding module Function: Stapling and folding brochures Stapling heads: 2 × Hohner 48/5 Paper size: 120 × 180 mm to 350 × 500 mm Final format: 90 × 120 mm to 250 × 350 mm Stapling thickness: max. 4 mm (stapling only), max. 2 mm (stapling + folding) Stapling distance: 73–160 mm Wire diameter: 0.5 mm Production speed: up to 4,050 brochures/hour (A5), approx. 3,200 brochures/hour (A4) Power consumption: approx. 450 W Dimensions: 271 × 81 × 110 cm Weight: approx. 490 kg Horizon FC-20A – Front trimmer Function: Front edge trimming of brochures Brochure size: max. 250 × 20 mm; min. 85 mm Trim size: max. 20 mm Processing: min. 4 pages / max. 88 pages (at 80 g/m²) Production speed: up to 3,400 cycles/h Power supply: 230 V / 50 Hz, 0.2 kW Dimensions: 610 × 810 × 1,070 mm Weight: approx. 240 kg

Condition: used, Year of construction: 2009, functionality: fully functional, Complete laminating machine with: automatic feeder, automatic pressure roller, pile sheet feeder. Iodpfsxdm E Eex Aifetg

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 34, Kolbus Casemaker, complete with pallet feeder type PPA290 Case – size range opened case (width x height) min. 300 x 210 mm, max. 1050 x 735 mm Cloth (width x height) min. 765 x 200 mm, min. 1080 x 290 mm Boards Thickness min. 1 mm, max. 4 mm Mechanical speed: Up to 40 cycles/min Board in-feed, Stiff spine in-feed, Flexible spine in-feed from roll, In-feed cloth, glue tank, glue rollers, pressing device, delivery belt Iedpfxjwnqtks Aifotg Machine no: 34, Books produced: 2 million