Used Ferrari 95 Rs for sale (29)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,530 h, load capacity: 46,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 4,900 mm, power: 257 kW (349.42 HP), empty load weight: 83,700 kg, total length: 12,000 mm, drive type: Diesel, construction width: 4,185 mm, Full container reachstacker Load center: 1780 Transmission: Dana TE32FF Condition: Ready for use and fully functional Technical condition: very good Front tires type: Pneumatic Front tires size: 18.00-33 Rear tires Type: Air Rear tires Size: 18.00-33 EN: hydraulic support jacks for increase of capacity hydraulically sliding cabin central greasing system for chassis, boom + spreader rear view camera air-condition (automatic climate control) automatic spreader adjustment 20'-40' DE: hydraulic support for higher load capacity with larger outreach 2x central greasing for chassis, boom and spreader hydraulically sliding cabin with electronic air-condition automatic spreader adjustment 20-40 rear view camera Ksdpfx Aeyn Stqoaledi

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 20,000 rpm, number of axes: 5, This 5-axis C.B. Ferrari A175 was manufactured in 2008. It features an impressive X-axis travel of 1050 mm, Y-axis travel of 520 mm, and Z-axis travel of 420 mm. The machine is equipped with a tool spindle running at 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the C.B. Ferrari A175 vertical machining centre we have for sale. Contact us for further details. • Configuration: 6 axes (X, Y, Z linear; A = part rotation; B = table rotation; C = head rotation) • Workholding: Part clamped on an ISO 50 taper (workholding interface; not a tool holder) • Tool spindle: ISO 40 interface, up to 20,000 rpm • Tool magazine: 60 positions • Coolant: No internal coolant Kdodpfsyvtb Hjx Aaloi • CNC control: Elexa E580H • Drives: Heidenhain Additional equipment • CNC-controlled tailstock (axis U) Technical Specification Taper Size ISO 40

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 8,500 h, load capacity: 32,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: duplex, power: 194 kW (263.77 HP), fork carriage width: 3,200 mm, fork length: 2,400 mm, empty load weight: 42,600 kg, drive type: Diesel, construction width: 3,400 mm, Heavy-duty forklift truck – diesel Kedpoyn Stwofx Aalsdi Load centre: 1200 ISO class: Terminal West Mast type: Duplex Transmission: ZF 3WG-191 Condition: ready for operation and fully functional Technical condition: good Front tyres type: pneumatic Front tyres size: 14.00-24 Rear tyres type: pneumatic Rear tyres size: 14.00-24 EN: central lubrication system, rear view camera, quick release system, air-conditioning

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 18,155 h, load capacity: 45,000 kg, lifting height: 14,565 mm, fuel type: diesel, power: 243 kW (330.39 HP), empty load weight: 65,600 kg, drive type: Diesel, construction width: 4,150 mm, Full-container reach stacker Transmission: Clark 4-speed automatic Condition: Ready for operation and fully functional Technical condition: Good Kdedpfxoylqyko Aalji Front tyre size: 18.00-25 Rear tyre size: 18.00-25 Piggy-back, hydraulic pile slope on spreader, hydraulic sliding cabin

Condition: used, functionality: fully functional, machine/vehicle number: A26100, Year of construction: 2009, operating hours: 17,080 h, load capacity: 45,000 kg, lifting height: 16,020 mm, fuel type: diesel, mast type: telescopic, construction height: 4,810 mm, power: 257 kW (349.42 HP), empty load weight: 7,100 kg, drive type: Diesel, Full-container reach stacker Chassis number: A26100 Mast type: Telescopic Transmission: Torque converter Technical condition: good Kedoydtbbopfx Aaledi Front tyre type: pneumatic Front tyre size: 18.00-25 Front tyre condition: 40 - 60% Rear tyre type: pneumatic Rear tyre size: 18.00-25 Rear tyre condition: 60 - 80% Sideshift, 20/40 hydraulic spreader Full cab,

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 850 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 420 mm, overall weight: 8,000 kg, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis C.B. Ferrari A152 was manufactured in 2009. It features an X-axis travel of 850 mm, Y-axis travel of 420 mm, and Z-axis travel of 420 mm. The machine has a table working area of 1720 x 525 mm and a main spindle speed of 16,000 RPM. If you are looking to get high-quality machining capabilities, consider the C.B. Ferrari A152 vertical machining centre we have for sale. Contact us for further details. • Table working area: 1720 x 525 mm • Rapid traverse: X 40 m/min; Y/Z 30 m/min • A-axis speed: 200 rpm Ksdpjyn Hmlefx Aalodi • B-axis speed: 10,000 rpm • Machine dimensions: 2,400 x 2,700 mm

Condition: used, Year of construction: 1996, operating hours: 20,700 h, load capacity: 41,000 kg, lifting height: 15,000 mm, fuel type: diesel, construction height: 4,800 mm, gearing type: automatic, Equipment: cabin, head guard, 2 units available. Location is between Munich and Nuremberg. Inspection and pick-up by appointment in the Munich area. Kdedpfxewh Haao Aalji All inspections have been carried out. Good condition. New Mercedes engine, 222 kW, 302 hp, 302 engine hours, 1150 total hours. Viewing by appointment only. F 198 Ferrari Width front: 4250 mm Rear: 3360 mm Chassis length: 8800 mm Overall height: 4570 mm Chassis height: 3350 mm A? Bock Total weight: 66,800 kg - 9500 kg spreader? 8500 mast

Condition: used, Year of construction: 2003, operating hours: 20,500 h, load capacity: 45,000 kg, lifting height: 16,000 mm, fuel type: diesel, construction height: 4,800 mm, gearing type: automatic, Equipment: cabin, head guard, 2 units available; location is between Munich and Nuremberg. Inspection and collection possible near Munich. All inspections have been carried out, good condition. Volvo engine 174 kW. Viewing by appointment only. F 365 Ferrari Front width: 4250 mm Rear: 3360 mm Chassis length: 8600 mm Overall height: 4700 mm Chassis height: 3660 mm (A-frame) Weight: 65600 kg, 9500 kg spreader, 8500 kg mast Kdodoxtc Syopfx Aaloi Chassis weight: 47600 kg Transport dimensions/weight

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK40 - Spindle power : 32,5 [kW] - Spindle speeds : 40.000 [rpm] - Number of spindle hours : 1.211 [h] Kdedpfjuhbuusx Aaloi LINEAR AXES - Travels on X/Y/Z axes : 420 / 320 / 320 [mm] - Cutting feed rates (X/Y/Z) : 60.000 [mm/min] A ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] B ROTARY AXIS - Travel : 100 [°] (+/-) - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 5 [sec] TABLE - Table dimensions : Ø 250 [mm] - Maximum weight upon table : 20 [kg] - Distance table / spindle nose (min./max.) : 40 / 360 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.555 [mm] - Machine height : 2.520 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 4873 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel - Linear scales - 3 colors status lamp - Coolant tank * With washing gun - Chips conveyor - Oil mist extractor : FILTERMIST FX5002 - Spindle cooling unit - Electrical cabinet air conditioning - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool-holders : 60 - Tool preparation bench

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed feed rollers from the top and bottom, 2×2.2kW - Electric auto-reverse - Reverse mode - Belt conveyor - Conveyor length: 5100mm - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight approx.: 3000kg – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Kdodpfx Aeyh Ikvjalji Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: used, mileage: 3,040 km, power: 625 kW (849.76 HP), first registration: 08/2023, fuel type: hybrid, color: yellow, gearing type: automatic, Year of construction: 2023, Equipment: air conditioning, Internal vehicle no.: G200066 Kedpfjyn T Hrsx Aaledi German vehicle Available immediately at our premises in Kaufungen - Kassel For more information, contact: Dirk Bruchhäuser *Viktoria Sologubova (Polish, Russian, Ukrainian, English) Subject to errors and prior sale. We are happy to accept your used vehicle as trade-in. Financing available directly through our company. GOLEC Commercial Vehicles GmbH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 16,306 km, power: 456 kW (619.99 HP), first registration: 04/2021, fuel type: gasoline, next inspection (TÜV): 03/2028, color: black, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), Internal vehicle number: G170475 German vehicle Available immediately at our premises in Kaufungen - Kassel Ksdpfx Ajyn T Hljaljdi More INFO from: Dirk Bruchhäuser (German, English) *Viktoria Sologubova (Polish, Russian, Ukrainian, English) Subject to errors We are happy to accept your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2010407, travel distance X-axis: 320 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 320 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 40,000 rpm, TECHNICAL DETAILS Travel distance X-axis: 320 mm Travel distance Y-axis: 320 mm Travel distance Z-axis: 320 mm Number of axes (simultaneous): 5 Max. spindle speed: 40,000 rpm Max. workpiece length: 150 mm Max. workpiece width: 150 mm Max. workpiece height: 150 mm Max. workpiece weight on table: 20 kg A-axis: 360° B-axis swivel range: +/- 115° Number of tools in tool changer: 60 Tool holder: ISO V 30 Ksdsyhnygopfx Aalodi Feed rate: 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Connection: 50 Hz 3x 400 Volt Spindle motor: 11 kW Total power consumption: 35 kW Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,400 x 2,900 mm Machine weight: approx. 6,000 kg EQUIPMENT Set of tool holders Coolant unit Chip conveyor Lighting Coolant/mist extraction Switch cabinet air conditioning Status indicator lamp

Condition: ready for operation (used), functionality: fully functional, Extraction unit 5.5 kW Power: 5.5 kW Filter bag cleaning system 36 filter bags Filter bag diameter: 160 mm Filter bag length: 2000 mm Kdodpfxoyr Nhmj Aalei Option for air recirculation back into the workshop

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Type: PBS-H-SM-09 R=1 88° -Dimensions: see drawing in the photos -Total length: 2505 mm / 835/27/H170 mm each -Transport dimensions: 835/170/H81 mm -Total weight: 48.4 kg Kodjyazmdjpfx Aalodi

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 9500 kg Main Drive Number of axis 3 Spindle Speed 20000 RPM Movement X-Axis Movement 1450 mm Z-Axis Movement 300 mm Y-Axis Movement 520 mm This 5-axis C.B. Ferrari A186 vertical machining center was manufactured in 2010. It features a table size of 525 × 2320 mm, X-axis travel of 1450 mm, and a maximum power of 40 kW. The machine includes a high-speed electrospindle capable of 20,000 rpm, ensuring efficient machining. If you are looking to get high-quality milling capabilities, consider the C.B. Ferrari A186 machine we have for sale. Contact us for more information about this machine. Application Types Kedpfjx D Hp Dex Aaledi Milling

Year of construction: 2020, condition: excellent (used), Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel -Condition: Fans are unused (stock items) Kdsdpfxoxg Enwe Aalji -Manufacturer: Ferrari, axial fan axial fan -Type: EF 905/I 4S/B A24 -Engine: Ferrari 11 kW 4P 160 50 Hz -Protection class: IP56 -Number: 3x fan available -Price: per piece -Dimensions: Ø 1000 x 675 mm -Weight: 196 kg/piece

Condition: used, Year of construction: 2008, Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm Kdsdpfofrpnwsx Aalji -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Condition: excellent (used), Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg Kedpfslwqgasx Aalsdi

Condition: excellent (used), F.lli Ferrari extraction system Kdjdpfeyh I A Eox Aalei Chip and sawdust extraction with fan, control cabinet and rotary airlock valve. Fan: F.lli Ferrari, year of manufacture 2002. Fan motor: 22 kW. Fan capacity approx. 22,000 m3/h. The extraction unit is equipped with bag filters and a bag cleaning system. External dimensions: width 385 cm, depth 240 cm, height 580 cm.

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Kdodpfx Aspkyn Rsalji Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC

Condition: excellent (used), power: 30 kW (40.79 HP), Item no.: Geb 14 Brand: Ferrari Type: ELVE ART 631 N4A LG0 Item condition: used, very good condition Available: immediately Conveying volume: 15,000 m³/h Lifting height: 48 mbar Revolutions: 2955 rpm Weight: 445 kg Suction flange: 400 mm diameter Pressure flange: 400 x 280 mm Motor Brand: ABB Power: 30 KW Voltage: 3 x 400 Volts Revolutions: 2955 rpm Kodpfowndi Sex Aalsdi

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: diesel, color: grey, first registration: 01/2008, Year of construction: 2008, driver cabin: other, Vehicle location: Bovenden, emergency stop Superstructure: Work basket capacity 200kg ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kdedpei Rnb Usfx Aalsi - .

Condition: used, Year of construction: 2014, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration Kodsw Ag Ndspfx Aalsdi The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, spindle speed (max.): 20,000 rpm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 480 mm, controller model: SIEMENS 840D SL, TECHNICAL DETAILS Kdodpoxrctnjfx Aalji Travel X-axis: 1,050 mm Travel Y-axis: 520 mm Travel Z-axis: 480 mm Rapid traverse X: 40 m/min Rapid traverse Y: 40 m/min Rapid traverse Z: 30 m/min Tool holder: HSK 63A Max. spindle speed: 20,000 rpm MACHINE DETAILS Control model: SIEMENS 840D SL Dimensions & Weight Passage size: 2.40 x 2.80 m Net weight: 8,500 kg EQUIPMENT Chip conveyor Swivel head Digital linear scales (0.0001 mm) CTS spindle cooling Chip extraction system