Used Falcon 275 for sale (1,660)

Condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor Tsdpfx Asd R N H Uohujf -Speed: 12.65m/min -Drive: 0.18 kW -2x belt widths: 275 mm -driven via: an axle -Length: 3210mm -Number: 1 piece available -Transport dimension: 3210/1020/H720 mm -Weight: 124kg

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage Tedpfou R S I Hjx Ahujf ----- Technical data ----- Cutting height: 60 mm, Voltage: 230 V

Condition: used, saw blade diameter 275 mm cutting diameter bis 90 mm cutting range flat 120 x 75 mm turning speeds 40/80 U/min miter cut 45°/90°/-45° ° weight of the machine ca. ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers Todpewglgiefx Ahuef

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 109987 - 2800015, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, stroke length: 1,950 mm, Suitable for chipless cold forming of profiles such as splines (straight or helical), spiral gears, oil grooves, CV joints, threads and knurls TECHNICAL DETAILS Workpiece diameter: 38 mm Workpiece length: 500 mm Rack length – max.: 610 mm Max. slide stroke: 1,950 mm Max. rolling bar length: 1,400 + 330 mm Max. profile external diameter (standard): 60 mm Max. profile width (standard): 175 mm Rollable profiles for involute gears (module range): 0.3–2.0 MACHINE DETAILS Machine weight: 10 t Total power requirement: 52 kW Current type: 3 Ph Frequency: 50 Hz Operating voltage: 400 V Rated current: 99 A Tsdpewm Hqvsfx Ahujf Overall width: 5,014 mm Machine width: 4,560 mm Depth without boom: 2,541 mm Depth with boom: 4,165 mm Height: 2,100 mm Total weight (without automation): 14,500 kg Drive power: 45 kW Hydraulic tank capacity: 1,000 l EQUIPMENT - Machine in horizontal design - Complete enclosure - Tailstock - Hydraulic system - Oil system

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW Tsdpfx Aenlbmzehujf dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: new, functionality: fully functional, Year of construction: 2025, color: white, overall weight: 2,500 kg, maximum load weight: 2,500 kg, empty load weight: 2,500 kg, loading space volume: 90 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Wohncontainer FALCON, Equipment: shower, Sun Container GmbH | Office Container | Residential Container | Construction Container | Model FALCON | 240cm x 600cm | High-Quality and Flexible Solution Available products can be viewed in our warehouse and picked up directly. Our office and residential containers offer an excellent solution for a wide range of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical Details: Todpfx Asvv Ukkjhusf Dimensions: • Length: 240 cm • Width: 600 cm • Height: 250 cm • Weight: 1450 kg Insulation: • Ceiling/Wall: 5 cm PUR (polyurethane) • Particularly robust and special floor chassis • 2 mm thick galvanized sheet steel • With rock wool insulation between the panes • Optional: 10 cm insulation with PUR, PIR, or rock wool available • Floor: 16 mm fiber cement board • PVC flooring Features: • 1 room • 1 front facade with floor-to-ceiling fixed glazing • 1 floor-to-ceiling window • 1 glass entrance door • 2 interior LED lights • 2 power outlets per room Colors: • RAL9002 High-quality workmanship for long-term use Stock & Delivery: • Stock items: Shipping Same-day delivery • Not in stock: Production time 2 to 4 weeks depending on the model • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Custom dimensions: Products can be manufactured according to the customer's specific requirements. Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or customization, please contact us!

Condition: used, variable speed geared motor, variable speed geared motor, electric motor Tsdpfx Ahecvvy Ajujf -Manufacturer Motor Nord Type: SK63L/4 -Manufacturer of variable speed gear North type: SK01-R080U-63-L/4 -Motor power: 0.18 kW -Speed range: 55-275 rpm -Motor: adjustable -height shaft axis: 102 mm -Drive shaft: Ø 20 mm -Construction: B3 -Number: 1 piece available -Dimensions: 350/175/H305 mm -Weight: 13.9 kg

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Tedpfx Aevl Skashujf Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: new, Bernardo horizontal bandsaw HBS 275 PRO Technical specifications Cutting range round 90° 225 mm Cutting range square 90° 200 x 200 mm Cutting range flat 90° 245 x 150 mm Cutting range round 45° 160 mm Cutting area square 45° 160 x 160 mm Cutting range round 60° 100 mm Cutting range square 60° 100 x 100 mm Working height 910 mm Saw blade dimensions 2480 x 27 x 0,9 mm cutting speed 45 / 90 m/min Coolant pump 100 W Motor output power S1 100% 1.1 kW Motor input power S6 40% 1.5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 180 kg Scope of delivery - Saw blade - Workpiece stop - Undercarriage - Pressure gauge for belt tension Todsfigzzjpfx Ahujf - Saw blade guide with carbide inserts - Vise with quick lock - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switching

Condition: new, Motor power 1,1/2,2 kW belt opening 130 mm belt dimensions 350x32x2,5 Tedpocgrkyjfx Ahujf weight 220 kg Speed 30/60 1/min. Cutting surface 0° 115 / 100 / 130x80 Cutting surface 45° right 100 / 85 / 90x80 Cutting surface 45° left 75 / 75 / 90x65 Cutting surface 60° right Cutting surface 60° left Description Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power. Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand. Basic equipment: clutch adjustable from the outside Blocking device with vice Sliding on prismatic guide with adjustable bar Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line. Adjustable fixing of the degasser, made entirely of steel. Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform. The machine can be lifted. Endless worm shaft mounted on pair of bearings. Saw blade holding shaft mounted on off-center punch. 2 speeds 30 and 60 rpm. Vise opening 130 mm Machine is supplied without saw blade. Electrical equipment: Electrical control panel marked cable connections main safety switch provided for padlock Emergency stop device Phase failure protection Speed changeover switch Thermal magnetic protection Undervoltage release Motor with IP 54 protection Low voltage system 24 Volt Electric coolant pump 48 V Motor 1,1/2,2 kW - 400 Volt For further technical data please refer to the attached PDF document.

Condition: used, Epple bandsaw BS 275 G Tsdpow E Hk Hefx Ahusf - Shipping possible at an additional cost

Condition: used, Year of construction: 2010, First registration: 07.05.2010 / _____ / PTO shaft 540 rpm / lower link pin KAT II / hydraulic reverse swing / drive speed 540 rpm / drum mower with center suspension / Tsdpfx Ahsqrruxeujf

Condition: used, Mounting rails sliding set, pipe clamps, pipe fastening, pipe clamp holder -Manufacturer: Sikla, sliding set for Siconnect Pressix rail system -Type: GS -Quantity: 22x sliding kit available Todpfsq Sbglox Ahusf -Price per piece -Dimension: 275/190/H55 mm -Weight: 1.8 kg/pc.

Year of construction: 2003, condition: ready for operation (used), Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. Todpoiiv Aqjfx Ahujf

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Tsdpfx Aed Du T Iehuof Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: used, Year of construction: 2003, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 Control SINUMERIK 840 D number of teeth 5 - 200 ratio of transmission 10:1 cutter diameter max. 228 mm x-axis 25 - 350 mm y-axis +/- 175 mm z-axis 125 - 600 mm b-axis -5 / +90 ° total power requirement 75 kW weight of the machine ca. 11,7 t dimensions of the machine ca. 12,5 x 3,0 x 3,0 m Equipped for dry milling Pressure deburrer Deburring device with driven brush Integrated magnetic chip conveyor Promot Cellmaster Cartridge pulse filter system User interface control works with Gleason Summary Tjdsvxwukopfx Ahusf

Condition: used, PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC Tsdpfsrb E Ewex Ahujf -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Condition: used, Year of construction: 2006, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm Todovxwr Aspfx Ahuof diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m coolant filtering unit Hoffmann HSF 100 V

Condition: used, Year of construction: 2013, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: MTF, belt conveyor on solid base frame, height adjustable -Type: GL-HM 140 -Speed: 9 m/min -Belt width: 275 mm -Conveyor length: 3000 mm -Drive: ATB 0.18 kW, see photo type plate -Transport dimensions: 3060/500/H930 mm -Weight: 89 kg Tedjtp Rfpopfx Ahuof

Condition: used, Year of construction: 2007, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm diameter of tools min 69,85 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control 160 i - MB FANUC total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI With EWAB robot cell (KUKA robot) without coolant filter system Fire extinguishing system without CO2 bottles Cooling oil return with various pumps / collecting basins Todpfxevxwnqs Ahuof Threading device A1/B2 axes with measuring probe Clamping device for a pinion shaft External spindle oil cooler Extraction system "pinion shaft"

Condition: used, Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: ltron, safety relief valve -Type: 275-D -PN: 16 bar -Connection: DN G 1 " Tjdpfxeg St Nqe Ahuef -Quantity: 2 pieces -Price per piece -Dimension: Ø190 x 205 mm -Weight: 5.7 kg / piece

Condition: used, Year of construction: 2005, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 Tjdpfx Ajvxwgmohuef range of tooth size 20 mm diameter of tools min 69,85 mm tooth width max. 58 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available

Condition: used, Micrometer, micrometer screw, measurement of tooth width, plate measuring surfaces -Measuring range: 275-300 mm -One revolution of the drum corresponds to: 0.5 mm -with locking device Tsdpfob A R H Djx Ahuof -Measuring force: ratchet -Setting mass -Hand protection -Key -Number: other sizes available -Weight: 1.5 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 986003, grinding wheel speed: 6,000 rpm, tool diameter: 230 mm, travel distance X-axis: 325 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 470 mm, TECHNICAL DETAILS max. gear ratio: 10:1 Number of teeth: 3 - 200 Tooth height: 20 mm Tooth width max.: 58 mm Control: SIN 840 D SIEMENS Axes X-axis: 325 mm Y-axis: 350 mm Z-axis: 470 mm B-axis: +90.1° / -1° Tjdpjv Rcn Hsfx Ahujf Spindle Grinding spindle speeds: continuously variable up to 6,000 rpm Workpiece spindle speed: 1,200 rpm Tool Max. tool diameter: 230 mm Min. tool diameter: 69.85 mm Table diameter: 212.71 mm MACHINE DETAILS Total power requirement: 75 kW Machine weight: approx. 10,000 kg Space requirement: approx. 6.10 m x 4.40 m x 3.30 m Transport dimensions machine: 4 x 2.5 x 2.85 m / 11 t Transport dimensions water tank: 3.55 x 2.41 x 2.5 m / 1.8 t Transport dimensions cooler: 1.5 x 0.8 x 1.1 m / 0.2 t Transport dimensions sheet metal: 2.5 x 1.1 x 0.8 m/ 0.25 t EQUIPMENT - Coolant filter system Hoffmann HSF 100 V

Condition: used, Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -with elongated holes -Clamping surface: 275 x 230 mm -Groove: 20 x 9 mm Tjdpfx Ahsc Nw Sqjuof -Milled: from 2 sides -Dimensions: 330/275/H40 mm -Weight: 10 kg