Used Falch for sale (58)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE150 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 110 kW (60Hz) Predpehga Scjfx Ah Tsc Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, operating pressure: 350 bar, New High pressure unit 350 bar at 21 lpm hot water self-built Vibemo built in 2024 in trailer / trailer. For the price where others offer a used one. Info about this 350/21 VIHT Engine type Kohler KDW 1404 3000 rpm diesel. Skid with diesel tank of 100 liter capacity. Pump 500/21 (is adjusted to max 350 bar) drive Toothed belt Heater 25 liter spiral 230 v 50 hz good for 100 degrees at the nozzle on request also with Vibemo Topsteam 140 degrees. Pressure regulator Type zero pulsar pressure adjustable by speed selection button temp adjustable by adjustable thermostat own control system with monitoring for temp and oil. by selection button the speed, hours, voltage of the battery can be seen. Tank level meter, refueling inside the trailer. Interior lighting in engine and control room. water tank 400 liter supply incl pre-filter and float 2 x stainless steel reels 1x Filling hose for water tank 50 mtr Pedpfx Asrnkgqsh Terc 1x High pressure hose 150 degrees 600 bar 50 mtr 1x handle (500 bar) 1x lance with flat jet Short 1x Lance with flat jet Long 1x lance with rotating head Trailer with 2 rear doors and 1 side flap This is in stock, so it can be used immediately. Photos are an example and may therefore differ slightly from reality. We also have used high-pressure cleaners in stock. Tip: buy it from the man who can also repair it!! Vibemo Solutions, Your partner for high pressure technology, we sell, buy, repair, do maintenance and sell parts for your high pressure unit. We do this in the Netherlands/Germany/Belgium and Poland. We are also happy to help you if you have questions or want to have a unit built to your wishes Leasing is also possible. Need maintenance? We also do maintenance on brands such as Falch, Waterkracht, Oertzen, Dynajet, Meclean, Denjet, Dibo, Woma Why Vibemo Solutions. Honest Prices! Service that goes beyond just selling! 24 hour service 6 days a week for repairs Knowledge of almost all brands Fast delivery and usually from stock so no long waiting times.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high flow and pressure requirements. The pump is powered by a 6-cylinder Volvo diesel engine. There are two variants of the engine with an exhaust system according to EU Stage V / US EPA Tier 4 final or with an exhaust system according to EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is manufactured to be corrosion-resistant and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully built-in solution in a trailer or container. The CD700 can be equipped with a manual gearbox, which allows the pump to be operated in several flow ranges and even manual operation in the lowest gear is possible. Similar but no Falch, Hammelmann, Kamat, Uraca, Woma, etc. Podohgblkopfx Ah Tsrc Available models: ----- Model Pressure Flow rate CD700-1000 1000 bar 261 Lpm General specifications: ----- Max. Pump speed: 522 rpm Drive engine: 6 cyl. Volvo Diesel EU Stage V or EU Stage II Power of the drive motor: 522 kW Drive engine speed: 1800 rpm Diesel tank: 800 L Max. Fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High pressure cleaner PTC Torpedo Compact 21/250, 21/350 and 15/500 similar but no Dynajet, Oertzen, Falch, .... - Cold water / hot water approx. 95°C and steam 32 bar up to 140°C + high pressure steam up to 150°C at 200 bar (only versions with 250 and 350 bar) and chemical free weed killing function with approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23l/min. at 250bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 23/350 | 23l/min. at 350bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 16/500 | 16l/min. at 500bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 16/250 HP (high pressure steam) | 16l/min. at 250bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 16/350 HP (high pressure steam) | 16l/min. at 350bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High pressure pump: Comet RW/TW three plunger pump with ceramic plungers - Operating hours counter - pressure gauge - pressure regulator Psdodqkrwopfx Ah Terc - safety valve - High quality painted steel frame with forklift lugs - Stainless steel covers - Magnetic descaling device - incl. 20 [...]

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-C cold water trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... - Single-axle trailer on hot-dip galvanized frame with support foot with wheel, parking brake, automatic reverse, stands, rear lights and reflectors, towing eye for 50 mm coupling, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min at 180bar | petrol engine: Honda GX690 17,7kW Psdpfjfdvkrjx Ah Terc CTR-C 55/160 | 55l/min. at 160bar | petrol engine: Honda GX690 17,7kW CTR-C 60/150 | 60l/min. at 150bar | Diesel engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD-reel: manual with max. 60 m. 1/2" hose (included) - Water supply reel: manual with 35 m. 3/4" hose - Water tank: 400 l - Options such as radio remote control, booster pump, warning light, working light, aluminium cover for hoses and accessories on request

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers pressures from 200 to 2,800 bar and flow rates from 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is constructed from hot-dip galvanized steel, ensuring long durability and corrosion resistance. For an attractive appearance, the frame is primed and then painted. The machine’s dimensions are 2,250 x 950 mm. The frame is equipped at all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side bracket for protection and storage, for example for high-pressure hoses. Comparable but not the same as Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 Lpm CD200-250 250 bar 250 Lpm CD200-1000 1000 bar 63 Lpm CD200-1380 1380 bar 42 Lpm CD200-2500 2500 bar 25 Lpm CD200-2800 2800 bar 23 Lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optionally without AdBlue) Prsdpfjhgbhnox Ah Toc Drive engine power: 149.1 kW Drive engine speed: 1,950 rpm Tank: 135 L for skid version, 200 L for trailer version Max. fuel consumption: 18-20 L/h Dimensions and unladen weight SKID: 2,170 mm x 1,350 mm x 1,810 mm (1,785 kg) Dimensions and unladen weight TRAILER: 3,800 mm x 1,900 mm x 2,000 mm (2,500 kg) Includes standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE125 series is an electrically driven high pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 90 kW (60Hz) Podohga Rxspfx Ah Terc Volt: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Standard accessories included.

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), Pressure washer PTC Easypower B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, - Operating pressure: 500 or 700 bar - Delivery rate: 21 or 15 l/min. - Engine: Vanguard 31 HP Stage V petrol 31PS/23kW, 3400 1-min - Dimensions: 1.000 x 820 x 850 mm - Empty weight: approx. 190 kg - High pressure pump: Comet TW 500 Premium three-plunger pump with ceramic plungers - Gearbox with 1560 1-min. pump - High quality painted steel frame with corrosion protection Pedpfx Ajfdz Eyjh Tsrc - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces industrial wheels 350mm - Electric starter - Operating hours counter - Stepless pressure valve made of stainless steel with EASY-START - Large water filter with easy to maintain filter cartridge - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power B 21/500 | 21 l/min 500 bar Easy Power B 15/700 | 15 l/min 700 bar

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-H Hot Water 95°C, Steam 140°C/32 bar, and High-Pressure Steam 150°C/200 bar (only for version 16 l/min and 350 bar). Trailer similar but not Dynajet, Oertzen, Falch, DIBO, etc. - Single-axle trailer on galvanized frame with jockey wheel, parking brake, automatic reverse, support legs, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires, and ABS. Pedpfxofdkaks Ah Torc The following hot water models are available: CTR-H 21/200 | 21 l/min at 200 bar | Engine: Kohler KDW702 12.6 kW CTR-H 20/350 | 20 l/min at 350 bar | Engine: Kohler KDW1003 19 kW CTR-H 16/350 | 16 l/min at 350 bar | Engine: Kohler KDW1003 19 kW | High-pressure steam 150°C at 200 bar - Dimensions: 3,045 x 1,390 x 1,190 mm - Unladen weight: approx. 400 kg - High-pressure pump: Comet RW/TW Premium with integrated gearbox - HD hose reel: manual, max. 60 m 1/2" or 80 m 3/8" hose (included) - Water supply reel: manual, 35 m 3/4" hose - Water tank: 200 l - 75 kW heating module - Options such as warning light, automatic hose reel, and accessories available on request

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year 01/08) Podpfxog Tm N As Ah Torc - Engine: electric 30kW - 1250l water tank - pressure gauge - pressure regulator - safety valve - Steel frame powder coated - Aluminum covers - Forklift lugs and crane eyes - Dimensions with 1250l water tank: approx. 1.100 x 1.760 x 1.770 - Empty weight: 1.085 kg - Year of construction: 2013 - Operating hours: approx. 1500 h Condition: high pressure pump 06/2022 overhauled. In very good used condition.

Year of construction: 2020, operating hours: 0 h, condition: as good as new (ex-display), PTC JTR-C cold water trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... - Single-axle trailer on hot-dip galvanized frame with support foot with wheel, parking brake, automatic reverse, stands, rear lights and reflectors, towing eye for 50 mm coupling, 13" tyres and ABS. The following cold water models are available: JTR-C 60/200 | 60l/min at 200bar | Engine: Kohler KDW 1404 26kW JTR-C 75/150 | 75l/min at 150bar | Engine: Kohler KDW 1404 26kW JTR-C 75/210 | 75l/min at 210bar | Engine: Kohler KDW 2204 37,5kW JTR-C 84/190 | 84l/min at 190bar | Engine: Kohler KDW 2204 37,5kW JTR-C 102/150 | 102l/min at 150bar | Engine: Kohler KDW 2204 37,5kW Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 Prodpfx Ahefdkbge Tjc - Empty weight: approx. 600 kg - High pressure pump: HPP - HD-reel: fixed and manual or hydraulic with max. 100 m 1/2" and 60 m. 3/4" hose (included) - Water supply reel: manual with 50 m. 3/4" hose - water tank: 600 l - Options such as radio remote control, warning light, work light and accessories on request

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CDT50 in the trailer version covers a pressure of 230 to 2000 bar with a volume flow of 11 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in trailer version can be configured with numerous options such as hot water boiler, electrically operated hose reel, remote control etc. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- Model Pressure Flow rate CDT50-230 230 bar 80 Lpm CDT50-400 400 bar 40 Lpm CDT50-500 500 bar 33 Lpm CDT50-700 700 bar 25 Lpm CDT50-1000 1000 bar 20 Lpm CDT50-1250 1250 bar 15 Lpm Podpfx Ashgbkfsh Torc CDT50-1380 1380 bar 13 Lpm CDT50-2000 2000 bar 11 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Tank capacity: 90 L Max. Fuel consumption: 11.0 L/h Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The machines of the CD25 series are compact high pressure cleaners from 170 to 500 bar and a volume flow from 17 to 42 l/min. The pump is driven by a 3-cylinder, water-cooled Kubota diesel engine. The robust frame is made of stainless steel for durability and corrosion resistance. The powder coating provides for a very nice appearance. The machine has very compact dimensions of 1200mm x 800mm. This is the same size as the well-known EURO pallet. The frame stands firmly on 4 large rubber feet. The high pressure machine is also equipped with forklift pockets and a central lifting eye. This makes it very easy to transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500 bar 17 Lpm General Specifications: ----- Max. Pump speed: 1750 rpm Pjdpfx Ashgbfhoh Torc Drive engine: Kubota Diesel 3 cyl. Water cooled Power of drive motor: 18.6 kW Drive motor speed: 3000 rpm Tank: 28 L Max. Fuel consumption: 5.7 L/h Loudness (7m): 80 dBa Dimensions and weight: 1200mm x 800mm x 1300 mm (350 kg) Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General specifications: ----- Drive motor power: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included. Predpfehga S Dox Ah Toc

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, - High-pressure cleaner PTC Torpedo Eco Compact 16/200, similar to but not Dynajet, Oertzen, Falch, DIBO, etc. - Cold water / hot water approx. 95°C, steam 32 bar up to 140°C, and chemical-free weed control function with approx. 99°C TECHNICAL DATA: - Torpedo Eco Compact 16/200 | 16 l/min at 200 bar | Diesel engine: Yanmar L100N 8.5 kW - Dimensions and unladen weight with 500 l water tank: 2000x1050x1100 mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW triple plunger pump with ceramic plungers - Hour counter - Pressure gauge - Pressure regulator - Safety valve - High-quality frame made of painted steel, also available with forklift sleeves - Stainless steel covers - Magnetic descaling device Psdpefdkcgefx Ah Tjrc - incl. frame for water tank, 500 l water tank - incl. basic accessories such as 20 m high-pressure hose, spray gun, lance, and 25° fan nozzle - Optional accessories such as water-sandblasting kit, surface cleaner, rotary nozzle, weed control lance and trolley available on request

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD100 series of water and water jet machines range from 250 to 2050 bar with pump flows from 21 to 167 l / min. The pump is driven by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel for long life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are fitted with rubber feet under all four corners and the machine has forklift pockets and suspension eyes at all four corners. The machines have galvanized roof panels with side railings for protection and storage of, for example, high pressure hoses. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1000 bar 42 Lpm CD100-1400 1400 bar 30 Lpm CD100-2050 2050 bar 21 Lpm General specifications: ----- Max. Pump speed: 750 rpm Drive engine: 4 Cyl. Sisu Turbo Diesel water cooled Drive motor power: 74.6 kW Drive motor speed: 1800 rpm Tank capacity: 140 L Podpfx Ashgbgqsh Terc Max. Fuel consumption: 16.0 L/h Loudness (1m): 84 dBa Dimensions and weight: 2250mm x 950mm x 1300 mm (2000 kg) Standard accessories included.

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD50 series of our high pressure machines covers a pressure from 230 to 2000 bar and a volume flow from 7 to 74 l/min. The pump is driven by a 4-cylinder water-cooled Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure long life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. There are 4 rubber feet mounted under the frame. The machine is also equipped with forklift pockets and lifting eyes at all four corners. For protection and storage of, for example, high-pressure hoses, a galvanized roof plate is provided. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD50-230 230 bar 74 Lpm Prodjhgbf Eopfx Ah Tsc CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl. Water cooled Power of drive motor: 37.3 kW Drive engine speed: 1800 rpm Tank capacity: 90 L Max. Fuel consumption: 10.0 L/h Loudness (7m): 80 dBa Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg). Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE40 belongs to the series of our high pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and surrounding side frames made of stainless steel. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eye facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 Prsdpfx Ahohga Iro Tjc CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General specifications: ----- Drive motor power: 30 kW (50Hz) / 33 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A (60Hz) Dimensions: 1600 mm x 1050 mm x 1150 mm Weight: 650 kg Standard accessories included.

Year of construction: 2022, condition: as good as new (ex-display), Pressure washer PTC Easypower XL D similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Feed rate: 13-47 l/min. - Engine: Yanmar Stage V 4-cylinder 4TNV88 Diesel 53PS/39,5kW, 2800 1-min - Dimensions: 1.600 x 1.320 x 1.200 - Tare weight: approx. 740/760 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Available as skid with anti-vibration feet or as trolly with industrial wheels Pedsdg Ittspfx Ah Tsrc - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle The following models are available: Easy Power XL D 47/400 | 47 l/min 400 bar Easy Power XL D 38/500 | 38 l/min 500 bar Easy Power XL D 30/600 | 30 l/min 600 bar Easy Power XL D 19/1000 | 19 l/min 1000 bar Easy Power XL D 17/1100 | 17 l/min 1100 bar Easy Power XL D 15/1250 | 15 l/min 1250 bar Easy Power XL D 13/1500 | 13 l/min 1500 bar

Year of construction: 2022, condition: as good as new (ex-display), Pressure washer PTC Easypower XL E similar but not Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Feed rate: 13-38 l/min. - Motor: IE3 electric 63A, 3Ph-400V-50Hz 50PS/37kW, 1450 1-min or IE3 electric 63A, 3Ph-440V-60Hz 50PS/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm Prodpfx Ahsfdzxio Tjc - Tare weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easy manoeuvrability - Industrial low voltage supply (24V) and control unit with star-delta starter and 10 m. Power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operating hours counter - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power XL E 38/400 | 38l/min 400bar | 30kW | 560kg Easy Power XL E 30/500 | 30l/min 500 bar | 30kW | 560kg Easy Power XL E 20/800 | 20l/min. 800bar | 30kW | 580kg Easy Power XL E 15/1000 | 15l/min 1000bar | 30kW | 580kg Easy Power XXL E 19/1000 | 19l/min 1000bar | 37kW | 580kg Easy Power XXL E 15/1250 | 15l/min 1250bar | 37kW | 580kg Easy Power XXL E 13/1500 | 13l/min 1500bar | 37kW | 580kg

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), Pressure washer PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Feed rate: 38 or 30 l/min. - Motor: electric 63A, 3Ph-400V-50Hz 40PS/30kW, 1450 1-min or electric 63A, 3Ph-440V-60Hz 40PS/30kW, 1750 1-min - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easy manoeuvrability Pedefdzz Ujpfx Ah Torc - Industrial low voltage power supply (24V) and control unit with star-delta starter and 10 m. Power cable - Safety switch with thermomagnetic relay for motor protection - 4 pieces industrial wheels - Direct water intake through self-priming pump - Stainless steel relief valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power L E 38/500 | 38l/min. 400bar Easy Power L E 30/500 | 30l/min 500bar

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE15-series L/min Pjdohf Na Sjpfx Ah Torc CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11,2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Standard accessories included.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Podpfx Aehf Na Ijh Tsrc Models available: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7,5 kW (50Hz) / 9 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE08 series is an electrically powered high pressure cleaner. Psdpehf Naksfx Ah Torc This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE08-series L/min CE08-200 bar 15 7,5 hp water blaster unit 50Hz CE08-200 bar 15 7,5 hp water blaster unit 60Hz CE08-200 bar 15 7,5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7,5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE20 belongs to the series of our electrically operated high pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame is made of hot-dip galvanised and powder-coated sheet metal mouldings with stainless steel side frames all round. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and the slim version are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- 50 Hz-bar-l/min. CE20-200-38 CE20-280-26 CE20-350-23 CE20-400-20 CE20-500-16 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 15 kW (50Hz) / 15 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 28A (50Hz) - 26A (60Hz) Dimensions: 950 mm x 720 mm x 800 mm Dimensions SLIM: 950 mm x 500 mm x 800 mm Weight: 175 kg Podpshf Nbdsfx Ah Tjrc Standard accessories included.