200-2500 bar 21-300 l/min. Electric

DEN-JET CE150

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 110951103061440, Thieme semi-automatic 1010, built in 1995 Djdevrzv Sopfx Afnsun reconditioned machine, very good condition, like new! Thieme squeegee unit Print height: max. 50 mm Print format max. 500 x 560 mm Outside frame: 1000 x 1100 mm Print table: 800 x 1000 mm 23Hgnqhag Performance: 1350 pcs./h Electric/compressed air: 400/230 V / 12 A, 50 Hz / 6 bar Dimensions 1.7m X 2.3m H=1.6m 1200 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 3,114 h, functionality: fully functional, total width: 2,500 mm, total length: 7,100 mm, total height: 2,800 mm, pressure: 1,120 bar, operating pressure: 1,120 bar, fuel: diesel, overall weight: 12,000 kg, rotational speed (max.): 2,100 rpm, water tank capacity: 1,600 l, empty load weight: 12,000 kg, power: 286 kW (388.85 HP), year of last overhaul: 2024, water pressure: 1,120 bar, pump capacity: 111 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 233 in BDF / WAB container. Similar but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 233 PRESSURE STAGE 1: Operating pressure: 1120 bar Flow rate: 111 l/min. PRESSURE STAGE 2: Operating pressure: 920 bar Flow rate: 131 l/min. Selector/diverter valve with manual switch installed. Drive speed: 2100 rpm Plunger: d30 mm Drive power: 230 kW With 286 kW Deutz BF 6M 1015 C diesel engine With workshop and changing room. Dimensions (LxWxH): approx. 6000x2500x2800 mm Weight: approx. 12,000 kg Year of manufacture: 2007 (HD pump from 2005) Operating hours: 3114 Condition: New plunger seals, fuel and oil filters. The high-pressure pump is in very good used condition. Dujdpswyw Dtsfx Afnsn

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup Dedpfswbh Ifex Afnoun ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: used, mileage: 112,474 km, power: 260 kW (353.50 HP), first registration: 10/2001, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: semi-automatic, emission class: euro3, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2001, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #231 Mercedes Actros 2535 6x2 Wiedemann Super 2000 Body: - Wiedemann enviro tec - Super 2000 6.0/5.0/2.0 water recycling - 11,000-liter tank capacity - 5,000 liters flushing water - 6,000 liters sludge volume - Tank can be emptied by tilting at 45° Vacuum System: - Wiedemann & Reichhardt KW 2000 - 2,000 m³/h - approx. 20 m suction hose DN 125 - Operating hours: approx. 6,933 h High-Pressure System: - URACA KD716, 333 l/min at 170 bar - approx. 230 m high-pressure hose DN 25 - Hydraulic jetting hose reel with approx. 70 m DN 15 - Operating hours: approx. 4,176 h Special Features: - Sludge tank made of stainless steel - Suction and high-pressure booms - Engine can be started from the control cabinet - NMV can be started from the control cabinet - Wireless remote control with display - Equipment cabinet with two flaps, accessible from both sides - Hose storage rack - Pump compartment with extended sound insulation - Centralized lubrication system Technical Specifications: - GVW 26,000 KG - Length 9,900 mm - Height 3,600 mm - Width 2,550 mm Chassis: Special Equipment: - Raised exhaust behind cab, additional air compressor, MB 2C PTO, programmable special module, rotating beacon, rear window, circuit breaker, cab seats: driver comfort suspension seat, cab seats: middle seat with seatbelt, sun visor, steel front bumper Additional Equipment: - Emission standard Euro 3, axle configuration 6x2, hill-start aid with timer, trailer brake 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, electrically adjustable & heated exterior mirrors, battery 165 Ah, rear axle differential lock, cab: off-road mounting (6.0 HZ), cab: M (medium length), suspension: air/air (full air), electric window lift right, electric windows, alternator 80 A, 16-speed transmission, body/chassis: chassis, fuel tank: 400 l, rear top air intake, 1-chamber heated air dryer, engine 12.0 l - 260 kW V6 diesel (OM 501 LA), constant throttle engine brake, wheelbase 4,500 mm, rear axle disc brakes, front axle disc brakes, voltage converter 24V / 12V 8A, rear axle stabilizer, Telligent gearshift, CB radio prep, phone/fax prep, cranked front axle, immobilizer, permissible gross weight 26.00 t Dusdpfxovh H Hzs Afnjn For further detailed information and/or photos, please contact us directly. A wide selection of additional vehicles for SALE or RENT can be found at: All information subject to change, prior sale, and errors excepted. The buyer is obliged to independently verify the condition and features of the goods. Sale is carried out exclusively under our terms and conditions and with the exclusion of any warranty.

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable Duedpfxechhfus Afnjn cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Dsdoda Nqxspfx Afnjun Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now

Year of construction: 2026, condition: new, Specifications: - Performance: 2000 L/h - Electric demands: 0,5 kW, 230 V, 6 A, monophase Duedpfxefhb I Hj Afnsn - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 550x1075x350 mm - Weight: 50 kg - IP65 certified electronics - Food industrial impeller pump - Juice level sensors - Fully automatic operation, very easy to clean. - With 4pcs wheels. Requires minimal maintenance. - The machine is suitable for any Maurer press.

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Dujdpsxufbtofx Afnen Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: excellent (used), functionality: fully functional, overall weight: 950 kg, color: yellow, fuel type: diesel, fuel tank capacity: 80 l, motor manufacturer: Deutz D2011L03, total length: 3,740 mm, total width: 1,410 mm, total height: 1,360 mm, power: 36 kW (48.95 HP), volume flow: 318 m³/h, operating pressure: 7 bar, pressure (min.): 4 bar, pressure (max.): 8.5 bar, noise level: 98 dB, Year of construction: 2016, operating hours: 1,190 h, next inspection (TÜV): 04/2025, machine/vehicle number: APP418299, Equipment: UVV, - Hood and body made of impact-resistant, robust polyethylene - Overrun and parking brake with automatic reverse function - Tool oiler - Choice of truck DIN towing eye or car ball head coupling, height-adjustable towing device Next pressure vessel test in accordance with Directive 87/404/EEC due in May 2026 If you have any questions, please contact us personally. Duodpfotwz Ezjx Afnen

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 2,400 mm, total length: 1,250 mm, total height: 1,150 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, type of input current: AC, overall weight: 3,300 kg, rotational speed (max.): 1,500 rpm, power: 132 kW (179.47 HP), year of last overhaul: 2023, water pressure: 2,000 bar, pump capacity: 34 l/min, Equipment: type plate available, Stationary high-pressure pump unit Woma EG 250M-P20 on base frame. Similar but not Hammelmann, Kamat, or Uraca. Pump type: 250M P20 Duodpfx Asxmki Tsfnsn Operating pressure: 2,000 bar Flow rate: 34 l/min Drive speed: 1,500 rpm Drive power: 132 kW With EMK electric motor, with pressure control valve, with safety valve. Dimensions (LxWxH): approx. 1,250x2,400x1,150 mm Weight: approx. 3,300 kg Year of manufacture: 2013 Condition: In very good used condition. Pump has been serviced regularly, most recently at the beginning of December 2023. Documentation available.