Used Extrusion Line for sale (9,410)

Year of construction: 2013, condition: used, Make: EXTRUDEX, Year of manufacture: 2013, comprising: Granulate drying/conveying unit, Manufacturer: Koch, Model EKO300F, Year: 2013, Serial No.: 4459, microprocessor control, drying cylinder ETB1000, capacity: 1,000 l, vacuum conveyor, 2 dosing/conveying units, IFS exhaust air system, single-screw extruder, 3-part cooling section, refrigeration unit by Daikin, diameter measuring system by Zumbach, inkjet coder by VideoJet, Model 1710, microprocessor control, flame treatment unit by Hill, Model MF20-2-1, Year: 2013, caterpillar take-off by Extrudex, Model BC105, discharge conveyor belt, discharge chute, waste container, mobile, forklift pockets, peripheral devices, control cabinets, set of long part racks, 2 accessory cabinets, 2-door, industrial vacuum cleaner, workbench, 1,500 x 700 mm with base cabinet, 3 drawers. Cedpfx Asyx Eytecvjgr

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Cedpjyx Dwkofx Acvsgr Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet Codpfxjvbcbue Acvegr PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Cgodeu Rda Iepfx Acvor Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) – Bimetallic barrels – Nitrided, high-mixing screws Cedpfoyt Ikvox Acvsgr – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm FILM SPECIFICATIONS: Film widths achievable with 350–400 mm die: 1300–1700 mm Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Cgsdpjvri Ddefx Acvsr Options • Including haul-off • Including cooling bath

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off with haul-off Codpei Tu U Ujfx Acvegr with winder and guiding device

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Cedevztb Sjpfx Acvjgr Double wall corrugated pipes – 150mm to 350m Material Dryer and loader– M+H Equipment, Germany Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Tube Deposit Unit -500

Condition: ready for operation (used), Year of construction: 2001, Ø 710-1000mm range PVC pipe production line. Codovzqy Sepfx Acvegr

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: Cgedpfsuak Nlex Acver The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Condition: used, Year of construction: 1970, functionality: fully functional, BARMAG extrusion system consisting of: 1x BARMAG BA KEP 90-26.3-S extruder Csdjuakzzjpfx Acvsgr 1x BARMAG 9E4-11-103/Z transmission gear 1x AEG G 16.04 drive motor with forced ventilation, 460V, 112A, 46.7KW, 3150rpm, rated at 330V, 2.21A 1x SCHOLZ dosing unit, incl. Feed hopper 1x Control unit System features: - Single-screw extruder, built around 1970 - Throughput 200 kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90 mm - Screw length 2769.5 mm - Process length 26.3D - Geometry: Feed - Barrier - Mixing section - Screw material: 1.8550, nitrided - DC motor - Technical documentation This system is available in three versions. Subject to prior sale. Please send inquiries via email only. Note: The machine is still installed and can be inspected on site. The buyer must dismantle it and arrange shipping themselves. This is not included in the offer price.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric Cedpfji Dtb Ajx Acvjgr > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2023, condition: new, Coperion ZSK 27 MV Plus extrusion line Application: Pharma dental sticks Year: 2023, never used, still in original packaging Cedpfx Acjxr Hgxsvsgr

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 Cgjdpoqpft Isfx Acver - Screw Ø: 65 mm - Working hours: 102.364

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested Cgjdpfeya Eldsx Acvor EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Year of construction: 1993, condition: used, functionality: fully functional, OMIPA CO-EXTRUDER CAST LINE 5 LAYERS Complete line for the production of 5 layers cast film Material PET-C, PET-PP Material width 1550 mm Cgodpeypkfbefx Acvor Material thickness 0,2 / 0,8 mm Output max. 650 kg/h Nº4 Extruders with screw diameter 120mm / 90mm / 60mm / 45mm Co-extrusion block 5 layers: BA, BAAAB, ACDCB Flat extrusion die-head Nº5 Rolls calender with diameter 412 mm and width 1800 mm Cristallyzer GC/1200 L Dehumidifier SMC 1200 Gravimetric dosing system Edge trim cuttin system Year 1993

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h Cgjdpfxjn Utt Ho Acvor * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Year of construction: 2014, condition: excellent (used), functionality: fully functional, RECYCLING PELLETIZING EXTRUSION LINE – BEIER 2014 / EKOCHEM – 2023 – with autostart heating - Belt conveyor with amperes load control - Agglomerator – 75 kw with cooling blower and auto water spray system Csdpeuac Ugefx Acvjgr - Main engine extruder – 110 kw - Double degassing MELT LASER FILTER SYSTEM – HOP 400 – Ekochem – 2023 - with autostart heating - with cooling pump - laser filter spare parts: 1 set 200 microns, 1 set 250 microns, 2 sets 300 microns, 2 blades PELLETIZER – RW-440 – Ekochem – 2023 - with new Ekochem die head water pump - with PE and PP die head - with air compressor and custom die head blades – 48 h/set change - Centrifuges - Vibrator - Heated Silo + weight system - Capacity: PP( 400 – 500 kg/h) / PE( 500 – 600 kg/h )

Year of construction: 2000, condition: refurbished (used), • Manufacturer: SICA • Type : C800 • Year : 2000 Csdpfoix I I Iox Acvsgr • 6 caterpillar • Up to 800mm • Motor power : 8,5kW • Great condition

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Csdpfx Acjpah U Tjvjgr Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Cjdpfjw Ahfgox Acvegr Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: P251001170, Complete extrusion line for ABS/PP furniture edge banding from the renowned brand AMUT The line is in perfect technical condition, regularly serviced, and currently in operation. The set includes a spare screw, further enhancing its operational value. Codpfxexiu Nps Acvjgr Line equipment: 1. AMUT EA 100 extruder 2. AMUT calender station with CLV 1200 roller conveyor 3. AMUT TRK 100 edge banding machine 4. AMUT edge winder 5. Calendar cooling unit with a complete set of hoses 6. Electrical control cabinets for the entire line Material: ABS, PP (virgin + regrind) Working width: 700 mm (after side trimming) Nominal width: 1000 mm Thickness range: 0.5 – 2 mm Extruder: single-screw AMUT EA100 33D Extruder output: ABS: 320 kg/h PP: 350 kg/h Final product: 2 rolls, each 350 mm wide Line speed: up to 25 m/min Year of production: 2009 Technical condition: perfect, complete with spare screw

Year of construction: 1996, condition: excellent (used), film width: 1,300 mm, Used single-layer blown film extruder for sale in excellent condition, featuring a 150 mm die diameter and a production capacity of up to 100 kg/h. Model: Queens EP-65N Processable materials: LLDPE/LDPE/MDPE/HDPE/other blends. Screw diameter: 65 mm Head: • Blown film die head • Die diameter: 150 mm Die gap: 1.2 mm Cgsdsxrb Hmspfx Acver Output: Up to 100 kg/h, depending on material composition • Maximum speed: 120 m/min • Winding width: 1300 mm - Flying knife roll slitting Accessories included: • Tower • Gravimetric weight control system • Masterbatch dosing unit • Calibration cage The machine can be inspected in operation. Offered with spare parts.

Condition: new, Year of construction: 2016, operating hours: 9 h, functionality: fully functional, BMCtouch Integrated Automation System The control system, constructed in modular design, includes the following components: - PLC in industrial-standard design for machine control - Industrial PC for visualization and data management - Swivel-type operating and display panel with 19" TFT touch screen Performance Features: - User interface and functionality as per previous BMCtouch systems - Temperature control with self-tuning function - Pre-heating and start-up program - Prepared for data transfer to haul-offs with BMCsmart control systems - Operation of haul-off and saw from extruder terminal - CANopen Interface DS420 V2.0 - Flexible process display with individually configurable summary pages and customizable background - Configurable alarm management and alarm history - Trend data acquisition and presentation - Order management/administration - Configurable access authorization - Online assistance - Suitable for independent multi-user operation - Additional memory for history trends - Network capability - Modem Integration of Central Air Supply Co-extruder, BCE 1-30-25D - Stand-alone machine - Synchronization with main extruder via CANopen, DSP 420 V2.0 - AC drive incl. gearbox - Nitrided screws - BMCeco operator terminal - Product of battenfeld-cincinnati China branch Extruder, solEX 75-40 i Designed for pipe extrusion Technical Data: - Screw diameter: 75 mm - Effective screw length: 40xD - Drive power: 300 kW - Barrel heating zones: 5 pcs. - Barrel cooling zones: 5 pcs. - Total installed power, max.: 347.37 kVA Die heating zone incl. thermocouple (6 kW, 230 V) (BMCtouch control) Extrusion Die, helix 500 VSI-TZ Designed for the extrusion of PO pipes - Two-step distributor consisting of smoothing thread and compact lattice basket - Base die and die set made of tempered steel - Material flow surfaces are polished - Pipe O.D.: 90 - 500 mm - Number of heating zones: 17 Co-extrusion ring for 4 color stripes Calibrating sleeve, type 6 For PO pipes vacStream 500-6 No. 1 Designed for calibrating and cooling of pipes - Closed stainless steel tank with welded feet - Tank on rollers with height and lateral adjustment - Rust-proof hinged lids - Central water inlet and outlet - Pipework made from rust-proof materials - Manual reversible flow filter unit with bypass - Mechanical vacuum control - Temperature display Technical Data: - Pipe diameter range: 90 - 500 mm - Number of solid taper nozzles: 162 pcs. - Number of spray rods: 6 pcs. - Max. vacuum: 0.7 bar - Length of vacuum chamber: 5500 mm - Total length: 5900 mm Cjdjx Sbc Repfx Acvegr vacStream 500-6 No. 2 Designed for calibrating and cooling of pipes coolStream 500-6 4 For pipe cooling - Closed stainless steel tank - Base frame with height-adjustable feet - Rust-proof, hinged lid - Central water inlet and outlet - Pipework made from rust-proof materials - Manual reversible flow filter unit with bypass - Temperature display - Spray rods made of PVC - Solid taper nozzles with bayonet lock - Visual monitoring of pumps - Drip trays at inlet and outlet - Water circulation pump pullStream R_ 500-6 E Designed for pipe haul-off cutStream RTAplus 500 For chipless cutting of PO pipes

Condition: used, Extrusion Line, Including: 2ea Mixer, Maker Jiangyin Brightsail Machinery, Model BSR-5000, Year 2020; Barrel volume 5000L, Power 30kW, Work volume 3000L; to include 2 units of Vacuum feeding machine, Maker Jiangyin Brightsail Machinery, Model ZKS-7, Year 2020; Capacity 4000kg/hr, Power 7.75kW; to include Platform; 1ea Small Mixer; 1ea Vibrating Screen, Maker Local, Model 800-IS, Year 2021; Power 0.55kW, Vibration frequency 1440, Amplitude; Cgsdpfx Ajyhm Ebocvsr 1 unit of Feeding System, Maker Coperion K-TRON, Year 2020; to include stainless steel bracket; 1ea Extruder, Maker Coperion, Model ZSK, Year 2020; to include 1ea Water dispenser and 2ea Screw shaft; to include Screw shaft puller; 1ea Cutter, Maker Urschel, Model 3600F; 2ea Unused Temperature Controller, Maker REGLOPLAS; 1ea PSD Vibrating Screen, Maker TYLER, Model RX-30-10, Year 2021; 1ea LN2 Freezer, Maker CES, Model CES-TF-LIN-30FTX50IN-PLC, Year 2020; Weight 6000kg, Power 9kW;