Used Extractor for sale (777)

Condition: good (used), filter system, clean air filter, fine filter, filter, compact filter, suspended matter filter, filter cassette, cartridge filter, cassette filter -Manufacturer: DCE, cassette filter suitable for ID34372 BTR Unicell C16-2K7 -Number: 4x filters available -Price/Delivery: complete -Dimensions each: 800/100/H500 mm Bledpfxovmn Dxs Ac Tjl -Weight: 3.1 kg/piece

Condition: good (used), Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, wet vacuum cleaners Bodpjb Hd U Ujfx Ac Tell -Connection: 220 volts -Plastic container: for vacuuming liquids Power: Watts -Dimensions: 520/650/H930 mm -Weight: 23 kg

Condition: good (used), Filter system, clean air filter -Built-in, adjustable fan -Aluminum case -Volume flow rate: 1060 m³/h -Number: 3x blowers available -Price: per piece Bledpfsb A Shujx Ac Tol -Dimensions: 560/1160/H340 mm -Weight: 20 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm Bedpsq Ii Dlefx Ac Tell max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: new, Year of construction: 2026, Professional CO2 laser with a 1600mm x 1000mm work table and a tube with a rated power of 150W reaching 168W at peak! The standard equipment includes a CW5200 liquid cooler, a compressor for blowing the lens and material, and a smoke extractor. Working Area: The 1600x1000mm table allows you to work with large and complex projects. Laser Power: Rated power of 150W, reaching 168W at peak! This is a guarantee of fast and precise operation. Cooling and Efficiency: Equipped with a CW5200 liquid cooler ensuring optimal working conditions and a compressor for blowing the lens and material. Modern Technologies: Ruida RDC6445S controller and support for many graphic formats, WiFi and USB interface, and color separation. High Precision and Repeatability: Thanks to precise stepper motors and linear guides from LEADSHINE and the ability to work in 2500DPI resolution. Versatility: Excellent effects in engraving and cutting materials such as acrylic, wood, textiles, leather, plastics and much more! Exceptional Standard Equipment: PURI 150-168W laser tube, smoke extraction, steel honeycomb table, and blower compressor. Advanced functions, high quality of workmanship and a wide range of possibilities make our CO2 1610G laser not only a work tool, but also an investment in the future of your business! Model: 1610G Working area: 1600x1000mm (Y-axis pass-through table) Rated laser power: 150W Peak laser power: 168W (!) Laser tube type/type: Glass CO2 laser tube Cooling type: Closed-loop water cooling - CW5200 cooler Max. engraving speed: 800mm/s Suggested max. cutting speed: 400mm/s Max. Cutting thickness: up to 25mm depending on the material and parameters Min. engraving size for letters: 1mm x 1mm Engraving precision: 2500DPI Repeatability: +-0.01mm NEW – Controller and motherboard: Ruida RDC6445S - a module with advanced functions providing advanced control over the parameters and processing process Supported graphic forms: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported interface: WiFi, USB Color separation: Yes Drive system: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15mm linear guides by PMI Standard equipment: Bodpfxotvmnqj Ac Tjll PURI 150-168W laser tube Fume extraction and piping CW5200 cooler Table knife Rigid, stable steel honeycomb table Blowing compressor

Condition: used, High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.56 kW -Volume output: approx. 45 m³/min -Connection air duct: 285 x 150 mm -Number: 2x fan available -Price: per piece Blodpfx Acodwlp Ue Tsl -Dimensions: 380/380/H330 mm -Weight: 15 kg

Condition: used, High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 2870 rpm -Volume output: m³/h -Pressure increase: Pa -Connection inlet: Ø 270 mm (without nozzle) -Connection output: 100 x 140 mm -Number: 1x fan available -Price: per piece -Dimensions: 540/400/H775 mm -Weight: 40.5 kg Bljdsdz Umiepfx Ac Tsl

Condition: good (used), Year of construction: 2000, Dimensions (L/W/H) 2300 x 700 x 1300 mm Air consumption 3500 m³/h Motor output 1,5 kW Bljdoxr Rbmopfx Ac Tjl weight of the machine ca. 150 kg

Year of construction: 2014, condition: ready for operation (used), laser power: 260,000 W, Laser welding machine manufactured in 2014. This RONDA IMPIANTO CHIUSURA E SALDATURA LASER is designed for tube processing, currently configured for TIG welding and tack welding operations. It features a tube diameter range of 219 – 1,500 mm and a tube thickness of 3 – 12 mm. The machine operates with 8 pushers and is controlled from an external workstation. If you are looking to get high-quality welding capabilities, consider the RONDA IMPIANTO CHIUSURA E SALDATURA LASER machine we have for sale. Contact us for further details. • Current application: TIG welding / tack welding • Original application: Laser system (currently disabled) • Tube diameter capacity: 219 – 1,500 mm • Tube thickness capacity: 3 – 12 mm • Tube length capacity: 3,000 – 13,000 mm • Working system: 8 pushers (4 lateral + 4 upper) • Torch: TIG torch on front head • TIG wire diameter: 1.2 mm • Shielding gas: Argon • Machine control: External workstation with cycle start • Laser status: Laser element disabled in the current configuration Additional equipment Bsdpfx Acszdz Nxs Tell • Former laser equipment available in stock: laser generator and extractor (can be included in the sale)

Condition: used, functionality: fully functional, For sale: 6 units Blsdpfx Aezpzqyjc Tjl We are open to receiving fixed price offers for each unit. Inspection is welcome.

Condition: like new (used), Year of construction: 2007, total length: 1,700 mm, total width: 900 mm, total height: 1,200 mm, overall weight: 300 kg, height adjustment type: electric, grinding belt length: 2,650 mm, grinding belt width: 150 mm, Volpato edge sander – MADE IN ITALY! - Working height: 150mm - Sanding belt length: 2650mm - Mechanical sanding belt oscillation - Main motor: 2.2 kW - Control panel - Sanding at angles from 5 to 90 degrees - Year: 2007 Machine dimensions: - Length: 1700 mm - Width: 900 mm - Height: 1200 mm - Weight: 300 kg Machine testing is possible on-site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Bsdszxyuvopfx Ac Tell jbsmaszyny.pl We have the following machines available: band saws, circular saws, crosscut saws and panel saws, planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planers, 4-sided, 3-sided, three-sided, two-sided, thicknessers, jointers, sanders, planers, combined planer-jointers, combined planer-thicknessers, combined jointer-thicknessers, thicknesser-jointers, cleaning machines, mortisers, tenoners, parquet machines, trimmers, edge trimmers, machines for log homes, milling machines, routers, spindle mounters, top routers, bottom routers, sanders, wide belt sanders, throughfeed sanders, roller sanders, disc sanders, angle sanders, jointers, drills, drilling machines, horizontal, radial, milling machines, multi-spindle, edge banding machines, edge banders, veneer machines, presses, lathes, sawmills, briquetting machines, chippers, wood chippers, dowel machines, mortising machines, dust extraction systems, extractors, fans, compressors, sharpening machines, multi-functional machines.

Condition: used, Year of construction: 2026, The CORMAK FM230-L1 Dust Collector is a professional dust extraction system designed for woodworking shops and workshops that require efficient dust collection while operating in limited spaces. Powered by a 0.75 kW motor and equipped with a high-performance impeller, it delivers an airflow capacity of 1,150 m³/h for effective removal of sawdust, wood chips, and fine dust from woodworking machines and workstations. It is a reliable solution for both professional production facilities and home workshops. Key Features Airflow capacity of 1,150 m³/h – efficiently removes sawdust, wood chips, and fine dust from machines and work areas. 0.75 kW (S1) continuous-duty motor – designed for reliable long-term operation on a standard 230 V power supply without requiring electrical upgrades. WhirlWind metal impeller – dynamically balanced for smooth, quiet operation and long service life. Mobile base – four heavy-duty bearing-mounted wheels and an ergonomic handle make transportation around the workshop easy. Sealed steel housing – minimizes dust leakage while reducing vibration for improved operating comfort. Universal Ø100 mm extraction port – compatible with most woodworking machines and dust extraction hose systems. Vacuum hose with cleaning nozzle – allows the unit to be used for cleaning floors and workstations as well as machine extraction. Construction and Technology The CORMAK FM230-L1 woodworking dust collector features a durable steel housing and a high-efficiency multi-blade metal impeller that generates strong suction while maintaining a low noise level. Integrated seals reduce dust emissions, helping keep the workshop cleaner and improving operator comfort. The machine is mounted on a robust mobile frame with four wheels and an ergonomic transport handle, allowing it to be moved quickly between workstations without interrupting production. Performance and Efficiency The FM230-L1 delivers reliable continuous performance thanks to its S1-rated motor. Operating at 2,800 rpm, it provides powerful airflow for efficient extraction from machines such as: Thickness planers Circular saws Spindle moulders Belt sanders The FM230-L1 is ideal for: Blodsy S Uz Tepfx Ac Tsl Woodworking and furniture manufacturing workshops Technical schools and vocational training centres Home workshops and hobby woodworking Service workshops requiring localized dust extraction for light to medium dust loads Standard Equipment Fabric filter bag Waste collection bag Mobile wheeled base High-performance metal impeller Flexible vacuum hose with cleaning nozzle Bag mounting clamps Optional Equipment High-efficiency filter bags Extraction reducers and Y-connectors Antistatic Ø100 mm extraction hoses Multi-machine distribution manifolds Technical Specifications Specification Value Motor power (S1) 0.75 kW Motor speed 2,800 rpm Airflow capacity 1,150 m³/h Maximum vacuum pressure 1,020 Pa Noise level 65 dB Collection bag capacity 60 L Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,550 mm Width 420 mm Length 800 mm Power supply 230 V Weight 27 kg PLEASE NOTE: These are out-of-warranty machines. A total of 2 units are available. Each machine is complete, fully functional, and tested to be in 100% working condition, but is supplied without the original packaging. NO WARRANTY IS PROVIDED.

Condition: used, -Dimensions: 1420x2600x2200mm -Stone size: 801x1630mm -Model: Omega5.163 -5 decks -Serial number: 8118337 -Year: 2003 -Baking surface: 6.6m² -Temperature: 300°C -Voltage: 400V -Power: 30kW -Weight: 1800kg -Refurbished equipment: The equipment is prepared upon order; lead times for collection and return are agreed upon at the time of ordering (please request the price after revision) -Front with brushed stainless steel hood -Solid refractory cement baking stones, 20mm thick -Stainless steel armoured electric heating elements -1 independent pressure relief valve per deck -1 independent steam generator per deck -Treated glazing to reduce heat loss -Steam unit and column always on the same side -Equipped with a steam extractor for the hood -Insulated with cross-laid rock wool panels -Wiring looms made of high-temperature silicone cables Bjdpfey H Ebmex Ac Tjll

Condition: used, -Dimensions (LxWxH): 1420x2200x2200 mm -Serial number: 8801680 -Reference number: 7367165 Bedpsy Icknjfx Ac Tjll -Baking surface: 5.3 m² -Stone slab dimensions: 801x1230 mm -Year: 2005 -Number of decks: 5 -Maximum temperature: 300°C -Voltage: 400V -Heating power: 53.6 kW -Weight: 1064 kg -Refurbished equipment: Equipment is prepared upon order; lead and turnaround times are specified at that moment (please request pricing after refurbishment) -Front panel with brushed stainless steel extraction hood -Heavy refractory cement baking soles, 20 mm thick -Stainless steel armoured electric heating elements -1 independent pressure relief damper per deck -1 independent steam generator per deck -Glazing treated to reduce heat loss -Steam system and column always on the same side -Equipped with a steam extractor for the hood -Insulated with cross-laid rock wool panels -Electrical bundles with high-temperature silicone cables

Condition: as good as new (ex-display), Year of construction: 2025, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Bedpfjw H Rp Aex Ac Tsll Demonstration model, only used for testing purposes (occupational health and safety association), dusted and cleaned. Right-hand design with connection diameter: 350 mm with flange JET cleaning system Motor power: 11.0 kW Filter area: 50.2 m² Nominal volume flow: 6927 m³/h Maximum volume flow: 8000 m³/h Negative pressure at 20 m/s in the intake nozzle: 3162 Pascal (in dusted condition) Collection volume: 4 x 160 liters 5-meter connection cable with 32A CEE plug Dimensions: see photo

Condition: good (used), Filter box Exhaust system dust filter extractor dust collector DCE Dalamatic Fitted with 6x sintamatic filter cartridges Fully serviced Fan power 1.1kW 3000rpm See our other advertisements Bledowyf Awopfx Ac Tjl VMA Wekerom

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Bjdpfswqdycox Ac Tjll Technical data: - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Required space approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: excellent (used), Dinnissen sack discharge system, sack discharge station Semi-automatic machine All stainless steel Equipped with empty sack press Bljdpswygfysfx Ac Tol Equipped with left-right distribution screw Equipped with DCE Donaldson dust extractor Neat, complete machine

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Manufacturer: Kemper, mobile welding fume extraction system type Eco M 3 x 400 V / 50 Hz -Drive: 0.75 kW -Max. volume flow: 1650 m³/h Blsdpox I Aknjfx Ac Tjl -Max. pressure increase: 2100 Pa -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm -Number: 2 welding fume extraction systems available -Price: per piece -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc.

Condition: used, functionality: fully functional, Automatic dosing device for coating the filter plates with dry additive or for applying a filter aid layer. Bodpfxewvh A Ee Ac Tsll

Condition: new, CATALOGUE NUMBER HZ017 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels that allow for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA extraction efficiency approx. 8900m3/h Blsdpfx Acox Ux E Is Tsl engine power 7.5kW rotational speed 3000 rpm voltage 400V, 50Hz extraction nozzle 300mm filter surface 20m2 extraction speed 28m/sec number of filters 45 negative pressure 2800 Pa filter category G filter material polyester dimensions length / width / height 921x2342x2304mm weight 500kg Net price: PLN 18,500 Net price: EUR 4,400 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 53,000 h, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840 D, laser type: CO₂ laser, laser power: 3,200 W, punching diameter: 76 mm, sheet thickness steel (max.): 8 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, quick-change device, safety light barrier, Special equipment: + 2000 on Laser TruFlow 3200 + Blow-out device for small parts + Thread forming function with thread former breakage monitoring + MultiShear function + Slitting function + Marking/Fast chamfering function + Softpunch function + Re-punch cylinder + Vibration-damped mounting + Chip conveyor with tilting container + Additional clamping arm Manufacturer's standard description: Blodpfx Acjzdc Hms Tjl Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Cutting head quick-change system - Programmable cutting gas selection/pressure setting - Capacitive height control Dias III - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater - 18 tool cassettes - 18 die plates - Automatic tool changer with 19 stations - 2 clamping arms - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic re-punching - Tool length compensation - Fast shutdown of the hydraulics - Automatic shutdown - 2 automatic dividing slides for parts 500 x 500 mm each - Sensors for both dividing slides - 2 scrap bins - Punch scrap extraction - Forming capability - Programmable stamping tool lubrication with 2 containers - Programmable pressure plate - Adaptive stroke length control - Safety devices - Remote diagnostics system - RJ 45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. Blodpfx Acjzmqa Es Tol • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor Bjdjznibwepfx Ac Tjll High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, TECHNICAL DETAILS Bedpfx Acozlk Awj Tell - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 18 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 3.0 / 5.5 [kW] - C axis indexing precision : 0,001 [°] - Z stroke : 205 [mm] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 1,5 / 2,5 [kW] - C axis indexing precision : 0,001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 8 - Number of motorized positions : 8 - Live tools speed : 12.000 [rpm] - Live tools power : 1 / 2 [kW] - X/Z stroke : 165 / 550 [mm] - Y stroke : -40 / +25 [mm] - Rapid traverses rates (X/Y/Z) : 21 / 21 / 42 [m/min] - B Axis stroke : 100 [°] LOWER TURRET - Number of positions : 7 - Number of motorized positions : 7 - Live tools speed : 12.000 [rpm] - Live tools power : 1.5 / 2.5 [kW] - X/Z stroke : 120 / 250 [mm] - Y stroke : -20 / +40 [mm] - Rapid traverses rates (X/Y/Z) : 21 / 21 / 50 [mm/min] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 10.000 [rpm] - Live tools power : 1 / 2 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 24 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.060 x 1.480 [mm] - Machine height : 2.420 [mm] - Machine weight : 4300 [kg] MACHINE HOURS - Number of spindle hours : 41026 [h] EQUIPMENT - CNC : Traub TX 8i-s - Rotating guide bush - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank * with high-pressure pump : 40 [bars] * with paper filtering unit - Bar loader : LNS EXPRESS 220 - Oil mist extractor : DONALDSON TORIT DCE - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.