Used Extension Ladder for sale (4,433)

Condition: used, mileage: 22,000 km, power: 353 kW (479.95 HP), first registration: 06/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #348 MAN TGS 26.480 6x2 -4 BL with combined high-pressure flushing and suction-pressure tank body ADR Type K 14.0 / 28 PE Body KROLL Fahrzeugbau-Umwelttechnik Gmb * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300 l water/10,600 l sludge, 5,500 l water/8,200 l sludge, 7,700 l water/6,000 l sludge) * Suction from open waters possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * DRAINING: by means of a pneumatically actuated piston * MUDDING WATER DRAIN DN 80: for pushing back the dirty water via the boom into the sewer. * Manhole DN500 MAN TGS 26.480 chassis * 6x2 - 4BL * TipMatic with OMSI * 470PS/346KW * EURO 6e * Fuel capacity 400l * Chassis color RAL 9010 pure white * Color cab RAL 9010 pure white * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning Dkodpfxox Rv Rae Ag Dsk Vacuum system * CVS VacuStar 1600 approx. 1,550cbm/h at 400bar * Drive: flexible, via cardan shafts, V-belts and pneumatically switchable friction clutch from the auxiliary drive of the vehicle engine. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Additional suction hose hoses with suction at the right rear with approx. 30 m DN 80 suction hose High pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via cardan shafts, V-belt and pneumatically switchable friction clutch. * approx. 240m HP hose DN 25 * Large HP hose reel for 240m 1? DN 25 180° swivel * Equipped with 240m DN 25 * small HP hose reel for 80m ?? DN 13 hydraulic * equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Hydraulic and telescopic extension arm for suction hose that can be swiveled through 180 * ADR version L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Removable and swiveling halogen work lights * LED ambient lighting * Remote control of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing device (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7? color monitor incl. day/night switching * Sound insulation cladding in front of pump compartment * WATER MANAGEMENT WARNING SYSTEM: with buzzer in the main control cabinet and automatic pump shutdown. * Residual water drainage: pneumatic for all water-bearing parts with connection to the truck compressed air system. * Large equipment box * Tool box * Holder for traffic cone * vice * ladder * Large advertising boards on the right and left * Manhole DN500 Technical data* GGW 26.000KG * Empty weight 18,760 KG * Length 9,280mm * Height 3,740mm * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods.

Condition: excellent (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, conveyor belt length: 7,000 mm, conveyor belt speed: 50 mm/s, conveyor belt width: 1,000 mm, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours! TECHNICAL DETAILS Shredding system Type: Size L Number of roller teeth: 20 Feed hopper Loading height: 3,650 mm Feed width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Conveyor speed: 1.25 – 3.0 m/s MACHINE DETAILS Transport dimensions (L x W x H): 9,141 mm x 2,540 mm x 3,604 mm Permissible total weight: 25,000 kg Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: STAGE V Fuel tank capacity: 500 l Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Longitudinal conveyor (conveyor length: 2,900 mm, conveyor width: 800 mm) Centrally arranged lubrication bars 24 V electric control system Full radio remote control Large side maintenance doors (GRP) Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Dedpfx Asxln Rlsg Dekk Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive Hopper extension 350 mm, bilateral water spray Overband magnet (neodymium) Frame for 7 m overband magnet

Condition: used, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, Year of construction: 2024, Equipment: ABS, Total length without chute: 8801 mm Total length with chute: 8962 mm Internal length: 7410 mm Total width: 2550 mm Internal width: 2346 mm Dodpfxjutz Uye Ag Dskk Internal height: 1515 mm Track gauge: 2040 mm Distance: Kingpin to 2nd axle: 4800 mm Rear overhang without chute: 1296 mm Rear overhang with chute: 1457 mm Ground height: 1464 mm Max. height with tipped body: 8272 mm Total weight: 36,000 kg Technical gross weight: 39,000 kg Axle load: 8,000 kg Fifth wheel load: 12,000 kg Load volume: 26 m3 Manufacturer designation for homologation: NW-3 nd Unladen weight: 6376 kg The weight is specified with an accuracy of ±3% nd The manufacturer reserves the right to change the vehicle's technical specifications. Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Air suspension. Side impact protection made of aluminum profiles according to ECE 73. 2 plastic wheel chocks. Wheelbase 1310. Distance: kingpin on 2nd axle: 4800 mm. Steel underrun protection. Foldable underrun protection at the rear. Axles and suspension. 1200 mm fifth wheel height, unloaded. Number of axles: 3. Rigid axles. SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD. 1st lift axle. Support legs. SAF Hercules 2-speed transmission supports, full load. Fenders. Full PVC fenders - 6 pieces. Rubber mud flaps with Wielton LOGO behind the third axle Wheels 6x steel rims 22.5-11.75 ET-120 wheel nut caps Tires 6x tires 385-65-22.5, manufacturer's choice Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Toolbox - 44 L (mounted at the front of the chassis, left side) Water tank 30 L (mounted in the middle of the chassis, left side) Body Volume 26 m3 Front wall tilted 20 degrees Steel hinged hatch Internal height 1515 mm Floor 4.5 mm, side walls 4.5 mm Hardox Lower tension locks - 2 pcs. Other body equipment Operating station on the chassis frame, access on the left in FR (Driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) PVC roll-top tarpaulin Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco 2S/2M braking system Chassis paint finish Chassis paint finish RAL 7021 (black-gray) Body paint finish All steel parts are blasted twice before painting. Body paint finish RAL 7001 (silver-gray) Tarpaint finish Tarpaint finish RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1 Electrics Full LED lighting LED reversing light - 1 pc. 2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Additional systems Control cable for lift axle from the driver's cab Pre-assembled brake This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Marking Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Warranty 24 months for the complete product fr

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available immediately!!! Specially designed recovery boom with lifting fork for recovery and towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Fully hydraulic system. 3rd coat HDRV paint (STANDARD) Toolboxes (internal): yellow RAL 1032 Toolboxes (external): yellow RAL 1032 Lifting fork: black, U-TEXT RAL 9005 Recovery boom: black, U-TEXT RAL 9005 Rear stabilizers: black, U-TEXT RAL 9005 Counterweight (front, under cab, if applicable): black, U-TEXT RAL 9005, smooth front chassis (STANDARD) - Hot-dip galvanized - For installation of front counterweight - Rear part painted in superstructure color (STANDARD) - Lifting angle 40° (Illustration HDRV 1013) - Mounting plates for main and auxiliary winches - Shackles 2x15000kg - Left and right side on the rear part of the arm - Space for spare wheel holder on recovery boom. 6. Lifting fork (STANDARD) - Position range relative to horizontal axis: -5° / +10° - Load capacity retracted: 20,000 kg - Load capacity extended: 10,000 kg - Extension: 3,800 mm - Range up to hydraulic rear stabilizers (STANDARD) - Independently controlled - Maximum width: 3,000 mm - Rotating stabilizers for asphalt work and hydraulically extendable beam, No HDRV 1013 Single extension: 0 - 3,000 mm Maximum payload: 2,000 kg – tank storage behind cab - Relocation of air tank behind cab - Relocation of battery behind cab - Relocation of AdBlue tank - Counterweight behind cab on front frame (weight 100 kg) - COME UP Bison 50 main winch, mounted on recovery boom, pulling force 22, - COME UP Bison 50 auxiliary winch, mounted on recovery boom, pulling force 22, - Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on right side (STANDARD) - Right side, rear quick couplings for brake system supply, transferred from chassis - Quick-release connector with 20-meter cable - Air pressure roller, on left side of superstructure, - Over rear axles electrical trailer socket + trailer coupling, from chassis - Jump-start aid 12V/24V, cable, lever, right side mounted - Jump-start aid 12V/24V, cable, lever, left side mounted - Camera + LCD monitor in cab - Camera for winches + LCD monitor in control box MONITOR: - Vibration resistance: 10G - Shock resistance: 100G - Operating temperature: -30 to +70°C - CE marking - EMC approval: includes emergency stop switch - Radio remote control – 1 function - Made from aluminum - Holders for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in toolbox opening – doors Dodpepl Avdsfx Ag Dskk - Guard rail on toolboxes – stainless steel - Aluminum platform, perforated, mounted on top of toolboxes - Stainless steel holders in large toolbox behind cab for forks, hooks, open - Toolbox edges with stainless steel profiles - Lighting package compliant with road traffic regulations - LED lighting in toolboxes - LED external lighting - GAMET DE LUX LED warning lightbar, 1,800 mm - Mounting of warning lightbar on upper part of superstructure - ORANGE BLITZ warning light, 2 pieces – front mounted - ORANGE BLITZ warning light, 2 pieces – rear mounted - ORANGE BLITZ warning light, 2 pieces – mounted at edge of last toolbox door - Switches for all auxiliary lights

Condition: new, machine/vehicle number: 6650f95fd39bb5625662ee336, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis saddle forwarding Fine-grained steel welded construction in lightweight design, up to the support legs, saddle plate with replaceable 2 king pins Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Door retainer on the side 2 wheel chocks with holder Aluminum side bumper Steel underride guard with wide Fliegl mud flaps Folding guard plate for light unit Quarter-shell mudguards Impact protection at the rear Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin pole with bracket Dedpji Riwxefx Ag Dskk 1 plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 spare wheel holder for 1 e-wheel, with wheel fastening set Axles+suspension SAF disc brake axles with 430 mm disk diameter Axle/suspension laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/55 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding device installed in the floor. 2-circuit hydraulics. Forward/reverse travel is switched electrically via remote control with cable. -Moving floor Power supply via parking light Hydraulic actuation via truck power take-off Hydraulic connection with hose to front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump capacity: Liter capacity: 110 ltr/min Pressure: 250 bar Oil tank filling min: 100 ltr SB floor Sliding floor with wear plate at the rear Aluminum floor boards, 8 mm floor profile, ribbed design SB Trough Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of hollow aluminum profiles, welded together all round at the top with a wide special aluminum reinforcement profile, welded in at the bottom with a special frame. Sliding wall for better emptying of the load, with reinforced tarpaulin flaps at the bottom. With rail cleaner Rear wall made of hollow aluminum profiles, as a 2-leaf door, with 1/2 to 1/2 division, framed all round with a special U-profile with stop and rubber seal, with 2 external espagnolette locks, locked at the top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in the direction of travel. With swivel crossbar at the top. The door locks can be locked with a padlock. Standing platform with ladder access on both sides in the left/right direction of travel and railing for opening the door.

Condition: new, machine/vehicle number: cd0062ee491e6794168ccb01a, empty load weight: 8 kg, maximum load weight: 26 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 435/50 r 19,5, Further information Chassis semi-trailer In proven HANGLER welded construction made of high-quality steel with UP-welded side members tapered towards the front. Frame neck height 120 mm, with double center bar. Z-profile cross members punched through on the side member with floor panels (larger spacing) and with welded special side frame.2 kingpins to DIN 74080, replaceable, with grinding plate beveled to the front, made of high-quality sheet steel. EC front turning radius 2,040 mm. Sliding plate continuously welded from saddle plate to front plate *inside* 18 pairs of lashing eyes embedded in the outer frame, 2.5 tons each 8 pairs of lashing eyes embedded in the outer frame, 5 tons each 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminum side collision protection Plastic mudguards with splash protection mats Underride guard Impact protection at the rear Spare wheel holder for 1 e-wheel, with wheel mounting kit 3 Plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Aluminum ladder 3 300 mm, loose Pair of recessed stanchion pockets Piece of stanchions Storage compartment for plug-in slats on one side in FR left, below loading area Djdpfji Riw Hsx Ag Dokk Storage compartment for drop sides underneath the cargo bed, open, if technically possible Coil trough/inclined loading device Coil trough 8,000 mm long with cover and rubber pad. Cover 35 mm. With inclined loading bars and supports suitable for FR 80/80/4, complete stanchions 80/80 incl. lower reinforcement supplied Hydraulic sloping loading device with 4 crossbars:Hydraulic supply via tractor unit by means of 2-pipe pump system (forward/return) with 2-fold Faster coupling mounted on bulkhead (hoses are connected to Faster coupling from below).Sloping loading bars (FR 180x100x8 mm) with integrated extension part can be locked in height. Multi-stage hydraulic cylinders, each beam with cardanic suspension Incl. outriggers - adjustable - with bolt safety device underneath the loading area5-fold control block for operating the sloping loading device and for folding device sliding roof.1 set of boiler floor holder with height-adjustable support bolts for different boiler floor diameters, incl. shelf.1 piece of stop protection for sloping plate - for securing to the front! Axles + suspension SAF disc brake axles Offset axle spacing mm Air suspension Brake system 2-line compressed air brake system Aluminum air reservoir Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS make Wabco, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle - driving stability system Wheels and tires 435/50 R 19.5, manufacturer's choice Factory silver steel rims, manufacturer's choice Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 additional LED work light(s) at the rear, switched via reversing light 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm, detachable with plug 1 rotating beacon with holder, detachable Floor Screen printing plates approx. 3

Condition: new, machine/vehicle number: 562ca26c733cc91276e95b716, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis saddle forwarding Fine-grained steel welded construction in lightweight design, up to the support legs, saddle plate with replaceable 2 king pins Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Door retainer on the side 2 wheel chocks with holder Aluminum side bumper Steel underride guard with wide Fliegl mud flaps Folding guard plate for light unit Quarter-shell mudguards Impact protection at the rear Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin pole with bracket 1 plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 spare wheel holder for 1 e-wheel, with wheel fastening set Axles+suspension SAF disc brake axles with 430 mm disk diameter Axle/suspension laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Dedpei Riywjfx Ag Dokk Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/55 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding device installed in the floor. 2-circuit hydraulics. Forward/reverse travel is switched electrically via remote control with cable. -Moving floor Power supply via parking light Hydraulic actuation via truck power take-off Hydraulic connection with hose to front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump capacity: Liter capacity: 110 ltr/min Pressure: 250 bar Oil tank filling min: 100 ltr SB floor Sliding floor with wear plate at the rear Aluminum floor boards, 8 mm floor profile, ribbed design SB Trough Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of hollow aluminum profiles, welded together all round at the top with a wide special aluminum reinforcement profile, welded in at the bottom with a special frame. Sliding wall for better emptying of the load, with reinforced tarpaulin flaps at the bottom. With rail cleaner Rear wall made of hollow aluminum profiles, as a 2-leaf door, with 1/2 to 1/2 division, framed all round with a special U-profile with stop and rubber seal, with 2 external espagnolette locks, locked at the top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in the direction of travel. With swivel crossbar at the top. The door locks can be locked with a padlock. Standing platform with ladder access on both sides in the left/right direction of travel and railing for opening the door.

Condition: new, machine/vehicle number: c13a96854ea37997845c1bf36, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 235/75 17,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, fifth wheel plate with replaceable 2 king pins Suspension strip for feeder ramps on the rear extension across the entire width, outer edge chamfered to prevent damage. Frame in reinforced design for vehicle loading (up to outer frame) Outer frame with Load-Lock profile approx. every 400 mm, for lashing strap attachment 10 pairs of lashing mushrooms embedded in the top/outside of the outer frame, 10 tons each, starting from the neck area 24 t. 2-speed support winch, single-side operation, with straight connecting plate 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Sheet metal as splash guard riveted to the floor at the bottom, in the neck area above the axle of the SZM and above the axle unit Half-shell mudguards with anti-spray flaps according to EG Container locking, 4 pairs of locking cut-outs embedded in the floor for 2 x 20 foot or 1 x 40 foot containers, 4 pairs of container locking adapters, (additional cross support required at the front and rear of the container, the container must rest evenly across the width in conjunction with the locks, cross supports are not included in the scope of delivery) Caution! Damage to the Lohrblech floor by the cross supports possible! Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, incl. extendable underride guard with lighting, (then no access ladder at the rear) Covered with Lohr plate in the tramline area, steel checker plate in the middle. Attention! Ramp loading via rear only possible with rear extension in retracted position! Storage space for access ramps integrated in rear extension, can only be used if rear extension is extended 1000 mm - then excess length For transporting the ramps with the rear extension retracted - Storage space for ramps in FR on the right in front of the axles 1 pair of ramps 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg, (suspension bar for ramps on rear extension) Rear sloping to approx. 500 mm Electric cable winch, 24 volt, pulling force approx. 8165 kg, mounted centrally at the front, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller rope window and removable guide rollers Axles + suspension Drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) with central lift arm Axle lift below the recomm. Driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 235/75 17.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white LED position lights at the front 2 white/red rear lane departure lights 2 additional LED work lights at the rear, switched via reversing Dkodpfx Agolf Dtmj Dsk

Condition: new, machine/vehicle number: 068983c41e44eb5660fa9100c, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins X-tra Long, with 15030 mm internal length Outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm Extension ladder at the rear Door retainer at the side 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle Impact protection at the rear Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system AAC Basic, automatic relief axle acting on last axle, as maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED lighting coupled with the blinker Flashing side lights Side lights 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4-fold pockets and with long pocket at the bottom. 3 pairs of stanchion positions Insertion slats 5 rows of wooden slats Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Dsdpji Riwujfx Ag Djkk Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof rail when loading and unloading EcoLift - lifting roof can be raised by approx. 380 mm, on both sides, with gas pressure damper support, 3 driving positions at the front: Front interior height approx. 2900 mm / 2950 mm / 3000 mm, adjusted to approx. 3000 mm Optimum rain strip at the rear, at the top of the end bows,

Condition: new, machine/vehicle number: d9c951d746f03c05bc5470f89, empty load weight: 5 kg, maximum load weight: 29,045 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis saddle forwarding Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Vario stanchion system 4 pairs embedded in loading area, can be pushed together to 2 100 mm and extended to approx. 3 500 mm for loading. Stanchions can be locked every 100 mm on an internal width of 2 100 mm to 3 000 mm, 4 pairs of divisible stanchions 600 mm + 1 200 mm, total height 1 800 mm removable. With an internal stanchion width from approx. 2 350 mm, excess width. Vario end walls Floor prepared for inserting 3 end walls. 4 x 5 pairs of Vario stanchion pockets for insertable end walls (front and rear) and 1 x 3 pairs in the middle for transporting 2 x 5,000 mm or 2 x 6,000 mm construction steel mats. 2 Vario end walls, each consisting of 1 pair of plug-in stanchions and 1 top crossbeam approx. 2200 mm wide. Cross beams can be extended by 220 mm on both sides, with lashing hole for tensioning. 1900 mm high Vario bulkhead, can be converted to 1300 mm or 700 mm high. 4 stanchion pockets embedded in the center of the floor for 80 x 80 mm stanchions 1 pair of supports at the bottom for Vario bulkhead at the front 1 pair of lower supports for rear Vario bulkhead Slightly slanted outer frame with Load-Lock profile for lashing strap attachment 14 pairs of lashing eyes additionally embedded in the outer frame, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Wheel chocks with holder Aluminium side collision protection Galvanized steel underride guard Quarter-shell mudguards in front of and behind axle unit with anti-spray flaps on last axle only Impact protection at the rear 8 construction steel winches with wire rope and counter hooks, 4 x left and 4 x right with rope feed-through through the outer frame, 1 removable slip-on gearbox for construction steel winches - supplied loose (without bracket on the frame) 1 spare wheel holder for 1 e-wheel, with wheel fastening set 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 4 lashing/stanchion rails embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Axles + suspension SAF disc brake axles with 430 mm disc diameter Dkjdpfx Agsi Ri R Dj Dek Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be to

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #585 Mercedes-Benz Arocs 2546 6x2 with Combined High-Pressure Jetting and Vacuum/Pressure Tank Body, ADR Type K 14.0/28 PE This Mercedes-Benz Arocs 2546 6x2 with a combined KROLL high-pressure jetting and vacuum/pressure tank body is a brand-new vehicle with full ADR-L4BH specification. Equipped with VacuStar 1600, Uraca KD 718, large hose storage cassette, telescopic boom, and extensive special features, it is ready for the most demanding sewer, industrial, and hazardous materials applications. Body: • Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH • Tank material: S355J2+N (St 52.3) • ADR vacuum/pressure tank type K 14.0/28 PE • Discharge piston with 3 locking points: - 3,300 l water / 10,600 l sludge - 5,500 l water / 8,200 l sludge - 7,700 l water / 6,000 l sludge • Suction from open waters possible ("comfort version") via cassette boom with integrated filter • ADR tank truck equipment – type class AT/FL L4BH • Emptying via pneumatically operated piston • DN80 sludge water outlet for backflow via boom into the sewer Vacuum System • CVS VacuStar 1600 – approx. 1,550 m³/h at 400 mbar • Approx. 20 m HD hose DN125 • Hose storage cassette with simultaneous telescopic boom DN125 • Parallel guiding of suction and HD hose via boom • Right suction hose reel (hydraulic) with 30 m DN75, can be fully suctioned High-Pressure System • Uraca KD 718 – approx. 315 l/min at 170 bar • Large HD hose reel for 240 m DN25, 180° swivel-mounted - Equipped with 160 m DN25 • Small HD hose reel for 80 m DN13 (hydraulic) - Equipped with 80 m DN13 Special Features • Hose storage cassette with telescopic boom DN125 • Infinitely variable height adjustment of the suction hose (hydraulic, roller guide trolley) • Boom is hydraulically telescopic, swiveling 180° • ADR L4BH including EX/II, EX/III, and AT • Spray gun • LED beacon lights • LED perimeter lighting • Work functions remote-controlled via CAN-BUS • Remote control with 14 functions • Warm water hand wash unit • Large equipment cabinet at the rear left (e.g., for push camera) • Rear-view camera with 7" color monitor (day/night switch) • Acoustic insulation in front of pump compartment Dsdpfx Aexzadpeg Dokk • Large equipment box • Toolbox • Holder for traffic cones • Vice • Ladder • Large advertising boards left and right Summary A fully equipped, brand-new Arocs/KROLL combination with powerful suction unit, 315 l/170 bar HD system, ADR L4BH, and extensive special equipment. Ideal for professional operations with the highest technical requirements. For further details and/or photos, please contact us directly. A wide selection of further vehicles for PURCHASE or RENT can be found at: Specifications, availability, and errors excepted. The purchaser is required to independently verify the condition and features of the goods. Sale exclusively according to our general terms and conditions and with exclusion of any warranty.

Condition: new, mileage: 50 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, total width: 2,550 mm, total height: 3,820 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #384 Mercedes Benz Arocs 2848 6x2 -4 BL with combined high-pressure flushing and suction-pressure tank body ADR Type K 14.0 / 28 PE Body KROLL Fahrzeugbau-Umwelttechnik Gmb * HOSE STORAGE CASSETTE TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300 l water/10,600 l sludge, 5,500 l water/8,200 l sludge, 7,700 l water/6,000 l sludge) * Suction from open waters possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * DRAINING: by means of a pneumatically actuated piston * MUDDING WATER DRAIN DN 80: for pushing back the dirty water via the boom into the sewer. * Manhole DN500 Chassis Mercedes Benz Arocs 2848 * 6x2 - 4BL * automatic transmission * 480PS/350KW * EURO 6e * Fuel capacity approx. 350l * Color cab RAL 2004 orange * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550cbm/h at 400bar * Drive: flexible, via cardan shafts, V-belts and pneumatically switchable friction clutch from the auxiliary drive of the vehicle engine. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE TELESCOPIC BOOM DN 125 * 5,200 mm reach on the stop side * Additional suction hose hoses with suction at the right rear with approx. 30 m DN 80 suction hose High pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via cardan shafts, V-belt and pneumatically switchable friction clutch. * approx. 240m HP hose DN 25 * Large HP hose reel for 240m 1? DN 25 180° swivel * Equipped with 240m DN 25 * small HP hose reel for 80m ?? DN 13 hydraulic * equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Hydraulic and telescopic extension arm for suction hose that can be swiveled through 180 * ADR version L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Removable and swiveling halogen work lights * LED ambient lighting * Remote control of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing device (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7? color monitor incl. day/night switching * Sound insulation cladding in front of pump compartment * WATER MANAGEMENT WARNING SYSTEM: with buzzer in the main control cabinet and automatic pump shutdown. * Residual water drainage: pneumatic for all water-bearing parts with connection to the truck compressed air system. * Large equipment box * Tool box * Holder for traffic cone * vice * ladder * Large advertising boards on the right and left * Manhole DN500 Djdpfx Agevh H H Ij Dekk Technical data* GGW 26.000KG * Empty weight 18,760 KG * Length 9,280mm * Height 3,820mm * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale takes place exclusively

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full specification available on request. Loading area: * Extendable loading platform with pneumatically operated locking mechanism * Loading area with approx. 30 mm thick wooden planks * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tension straps (LC 2,000 daN) Dodpfxjw Tpr Ie Ag Dskk Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres: 385/65 R 22.5, manufacturer at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the truck is via the standardized EBS interface as per ISO 11992. For proper display, the truck must be capable of receiving and showing this data. Axle: * BPW axles and suspension * All axles hydromechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (offset 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system in accordance with EU regulations, EBS-E (2S2M) without connection lines to the tractor unit Steel construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with indicators * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal coating adhesion * Final painting with two coats of 2-component topcoat, single color, RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2" kingpin * Yellow-red air couplings at the galvanized front connection bar * At gooseneck and rear, left and right, brackets for warning panels, including sockets * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the external frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking position is provided in the extension for a 45' container * 4 pairs of transverse stake pocket strips in the loading area for approx. 100 x 50 mm plug-in stakes * Storage for max. 9 pairs of plug-in stakes bolted inside to the front wall * Boarding ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted front left under the loading platform * An additional INOX toolbox, approx. 1,200 x 46...

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire fleet of vehicles—including those available for immediate or short-term delivery—on our website. Extract from the equipment list. Complete equipment details available upon request. Cargo area: * Extendable cargo area with pneumatically operated locking mechanism * Cargo area with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Landing gear: * JOST mechanical landing legs with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 385/65 R 22.5 tyres Axle: * BPW axles and suspension, all axles hydro-mechanically forced-steered * With disc brakes * Technical axle load: 10,000 kg (ET 0) * Air suspension with lift and lower valve Brake system: Dodpfx Ajxl Nf Dog Dokk * WABCO brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: * High-quality 2-component (2K) topcoat in single-tone RAL 3002 Carmine Red Accessories: * Steering from front and rear, operated via cable remote control with push buttons, with single-track axle monitoring (without installation in towing vehicle) * Electro-hydraulic power unit * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * Galvanised connection strip at the front with yellow-red air couplings * Mounting bracket for rotating beacon at the rear of the trailer * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the cargo area * 1 spare wheel holder under the cargo area on the right-hand side (no spare wheel included) * Load gauge for determining axle loads, including load diagram Including special accessories: * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the cargo area for 1 x 20' container, 2 x 20' containers or 1 x 40' container; additional locking point in the extension for a 45' container * 4 crosswise pairs of stake pocket rails mounted in the cargo area for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes, screwed to the inside of the front wall * Boarding ladder mounted left and right in the direction of travel * INOX toolbox approx. 1,200 x 460 x 550 mm, mounted at the front under the cargo area on the left in the direction of travel * Additional INOX toolbox approx. 1,200 x 460 x 550 mm, under the cargo area on the left in the direction of travel * Cargo area with approx. 30 mm thick wooden floorboards framed in omega profiles * Lift axle on the front axle with control via TEBS E * BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM Metallisation (High Resistance Metallisation)

Condition: used, mileage: 95,862 km, power: 96 kW (130.52 HP), first registration: 11/2019, fuel type: diesel, color: white, gearing type: mechanical, Equipment: ABS, airbag, central locking, cruise control, immobilizer system, onboard computer, Special features - ABS - Radio - Airbag - On-board computer - Power steering - Cruise control Dkodpfx Agswz Ik Hj Dok - Driver’s seat with armrest - Electric windows - Electronic immobilizer - Central locking with remote control - Ladder rack - The vehicle is equipped with a new genuine particulate filter valued at €2,300. Superstructure Aerial Work Platform Time Versalift ETL-32-125 - Working height: 12.5 m - Lateral outreach: 7.3 m - Basket capacity up to 120 kg - Rotation: 360° - Remote control - Engine start/stop function - Electric emergency pump - Hour meter - Flashing beacons - 220V socket in the basket The vehicle is fitted with an aerial work platform (model Time Versalift ETL-32-125), mounted on a Renault Master. This telescopic platform is ideally suited for maintenance, installation, and inspection work at heights of up to approximately 12.5 m. An ideal vehicle for municipalities, utility companies, telecommunications, or trades businesses. All platform functions are operational and have been checked by our workshop. The vehicle is ready for registration. German papers, TÜV, and UVV are included free of charge. Additional features such as tow bar, lighting, shelving, and more are available on request. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. All presentations are made exclusively with original photos taken in-house – guaranteeing full transparency regarding the actual condition of the vehicle. Our vehicles undergo extensive reconditioning in our own specialist workshop prior to sale – including mechanical, bodywork, and paintwork. Therefore, they are optimally prepared for the next technical inspection. In addition, we guarantee the authenticity of the stated mileage. Trust is good – verification is better: On request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – including remote inspection. Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Custom financing and leasing options - Trade-in of your current vehicle - Installation of special equipment on request Looking for something specific? If you currently can’t find a suitable vehicle for your company in our inventory, contact us – we will be happy to assist you. For technical details, additional photos, or a personal consultation, we are always at your disposal. All stated prices are net prices. The contents of our website are created with the greatest care and updated regularly. Nevertheless, they are for general information only and do not replace individual advice. Only the information in the purchase contract is legally binding. Subject to changes, errors, typographical mistakes, and prior sale.

Condition: used, maximum load weight: 31,050 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2009, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2009, Schwarzmüller flatbed semi-trailer with Kennis Type 16.000 roll-off crane and hydraulic outriggers ---- Dkedpfegbtdvox Ag Dek * Manufacturer: Schwarzmüller * Model: Flatbed semi-trailer plus Kennis Type 16.000 roll-off crane with hydraulic outriggers * First registration: 02/2009 * Gross vehicle weight: 39,000 kg * Unladen weight (as per registration): 7,950 kg * Payload: 31,050 kg * Axles: 3 x Mercedes, 1st axle is a lift axle / 3rd axle is forced-steering * Suspension: Air suspension with raise/lower function * Tyres: 385/65 R 22.5, approx. 50% tread * Platform internal dimensions: approx. 13.50 m long x 2.48 m wide x 1.00 m high * Colour: Chassis black, side boards yellow * EBS * Kennis Type R-16/7.10 roll-off crane, year 2009, with hydraulic outriggers * 3 hydraulic extensions * Max. outreach at 7.10 m = 2,100 kg * Short arm at 3.50 m = 4,500 kg * 5th & 6th auxiliary hydraulic circuits * Elevated seat with joystick controls * Hatz diesel engine with Silent Pack * Container locks for 20ft or 40ft containers * 5-part aluminium side boards * Rear swing door * Access ladder at rear left * Removable stanchions * Lashing rails left and right for load securing * Wooden/steel floor * 2 toolboxes left * 1 toolbox right * Single wheel arches * Full load outrigger supports * Reversing lights * Spare wheel holder * Pallet fork available at extra cost German trailer!! German documents!!

Condition: used, maximum load weight: 31,050 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2009, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2009, Schwarzmüller flatbed trailer with Kennis type 16.000 roll crane and hydraulic outriggers Dkodpfsgt Si Tsx Ag Dek — Manufacturer: Schwarzmüller — Model: Flatbed trailer with Kennis roll crane type 16.000 with hydraulic outriggers — First Registration: 02/2009 — Gross vehicle weight: 39,000 kg — Unladen weight (as per registration): 7,950 kg — Payload: 31,050 kg — Axles: 3 x Mercedes, 1st axle is a lift axle / 3rd axle is steered — Suspension: Air suspension with lifting/lowering function — Tyres: 385/65 R 22.5 approx. 50% tread remaining — Internal flatbed dimensions: approx. 13.50 m long x 2.48 m wide x 1.00 m high — Colour: Chassis black, side walls yellow — EBS (Electronic Braking System) — Roll crane: Kennis type R-16/7.10, year 2009, with hydraulic outriggers — 3 hydraulic extensions — Max. outreach at 7.10m: 2,100 kg — Lifting capacity at 3.50m: 4,500 kg — 5th and 6th control circuit — Elevated seat with joystick controls — Hatz diesel engine with silent pack — Container locks for 20 ft or 40 ft containers — 5-piece aluminium side walls — Rear swing doors — Access ladder at rear left — Removable stanchions — Lashing rails on both sides for securing cargo — Wooden/steel floor — 2 toolboxes on left side — 1 toolbox on right side — Single mudguards — Full-load support legs — Reversing lights — Spare wheel bracket — Pallet forks available at extra cost

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,900 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Dksdpfxst T H Skj Ag Dsk Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, loading space length: 8,900 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth Dkedpjxp S Uvjfx Ag Dsk - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,900 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) Dkjdpfxsxqkaye Ag Djk - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: used, mileage: 1 km, first registration: 06/2006, Year of construction: 2006, machine/vehicle number: 036 / 16, Special features Top-mounted spreader with body extension: Dksdpfxsikp Ige Ag Dsk 1,80-1,85m ,Belt spreader ,Side wheel drive wheel drive ,RO-RO-System ,Lighting , Electric control panel ( not tested ) Folding roof , access ladder , Electric stand emptying Capacity: 4 m³ , Dampening salt: 2660 l , For sale in existing condition!

Condition: used, Year of construction: 2023, 3-way unit Boundary spreading system Limiter V Pipe protection bracket L Mechanical / position indicator Spreader ZA-V hopper extension S 2000 Built-in parts for / ZA basic units PTO shaft with friction clutch Strainer L and ladders / LED lighting to the rear Dkjdpfxet Dwibo Ag Dek

Condition: used, mileage: 545,407 km, power: 355 kW (482.67 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 14 m³, loading space length: 6,450 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN with Fassi F135 A2.22 building materials crane VIN: G207799 Chassis / Attachments: * Full air suspension * Lift axle * Wheelbase: 4,800 mm / 1,400 mm * Tyres: 315/80 R22.5 * Remaining tread depth: Front approx. 80%, Middle approx. 80%, Rear approx. 60% * 1 x Aluminium fuel tank 620 l * 1 x AdBlue tank * 1 x Hydraulic tank * 1 x PVC storage box * 1 x Stainless steel storage box * Fixed trailer coupling * Duomat + 2 ladders Bodywork: * Reichert body BP6500K-H * Fassi F135 A2.22 building materials crane with operator seat * 2x crane extensions * 2 rear stabilisers * Side walls 0.80 m * Body dimensions: 6.45 m x 2.48 m x 0.80 m * Lashing rings * Aluminium floor * 360° rotatable pallet fork Cab / Driver's compartment: * 2 bunks * Sunroof * Automatic climate control * Auxiliary heater Dksdpfx Agsv Ihx Eo Dsk * Navigation system * Hands-free device * CD radio with USB / AUX / BT * CB radio Engine / Transmission: * 355 kW // 12,902 cm³ // Euro 6 c * Automatic transmission * ZF Intarder * Differential lock Weights: * Gross vehicle weight: 26,000 kg * Payload: 11,520 kg * Unladen weight: 14,480 kg Other: * German vehicle * 1 previous owner ----2-Axle Kempf PA18 platform trailer VIN: M021121 Chassis / Attachments: * 2 x BPW Eco Plus Disc * Air suspension * Tyres: 385/65 R 22.5 * Remaining tread approx. 80% * Spare wheel holder Bodywork: * Platform body * Dimensions: 7,100 mm x 2,500 mm x 900 mm * 1.40 m front board * Daken PVC box at the front * Kinnegrip folding stanchions * Curtain height approx. 1.40 m in the centre Weights: * Gross vehicle weight: 18,000 kg * Payload: 14,680 kg * Unladen weight: 3,320 kg Other: * German vehicle * New TÜV inspection possible on request New main inspections / safety checks or weight reductions/increases are possible on request. We are happy to assist you in obtaining export/transit plates, as well as organising the transfer of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for typographical and writing errors, changes, prior sale and errors excepted! Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 sqm, you will find a wide variety of vehicles. Our company philosophy is characterised by fairness and integrity. Because customer satisfaction is very important to us, we offer our customers an outstanding all-round service package and provide them with a competent contact partner who supports them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organisation of special transports We are happy to assist you in organising special transports. Transit plates / Export license plates We are happy to assist you in obtaining export or short-term plates. Handling of customs formalities We are happy to assist you with customs clearance.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,205 mm, loading space width: 2,350 mm, loading space height: 2,100 mm, loading space volume: 47 m³, Equipment: ABS, Overall width: 10402 mm Bed length: 8585 mm Total width: 2550 mm Total height to upper frame: 3550 - 3600 mm Total height to tarpaulin peak: 3710 - 3760 mm Track width: 2040 mm Kingpin–2nd axle distance: 6120 mm Fifth wheel height: 1200 mm Axle spacing: 1310 mm Rear overhang: 1367 mm Floor height: 1400 - 1450 mm Max. height with tilted body: 9720 - 9770 mm Technical gross weight: 42000 kg Axle load: 8000 kg Technical axle load: 9000 kg Fifth wheel load: 12000 kg Technical fifth wheel load: 15000 kg Loading volume: 47.6 cbm Unladen weight: 6233 kg The weight is specified with an accuracy of +/-3% Axle spacing: 1310 mm Distance: Kingpin–2nd axle: 6120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck, longitudinal beams with recessed fifth wheel area Welded construction, weight-optimised from high-strength S700 steel Side underrun protection made from aluminium profiles according to ECE 73 2 plastic wheel chocks Axles and suspension 1200 mm coupling height unladen Rigid axles 3rd lift axle 1st lift axle SAF disc axles 3x 9000 kg 22.5” INTRADISC CD 2-speed landing gears with full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pcs Rubber splash guards with Wielton logo behind the third axle 6x steel rims 22.5-11.75 ET=120 Wheel nut protection caps Tyres 6x tyres 385/65/22.5 standard (Bridgestone/Hankook) Other chassis equipment Toolbox 44 L (mounted at front left of chassis) Water tank 30 L (mounted centrally left on the chassis) Holder for dust bag on chassis, 1 pc Dust bag, 2 pcs Shovel and broom on chassis, above mudguard Extendable rear ladder Interior height: 2100 mm Double-wing aluminium combo door, aluminium (1/2 ?) vertical with portal beam Side walls SL internal thickness 2.5 mm, fully welded Front wall inclined at 20 degrees Pallet width design 7 mm floor 2 grain discharge slides Tensioning locks below, 2 pcs Cross member spacing under the floor: 360 mm Body damping: Polyp Other superstructure features Tension chain between sidewalls Operator station on chassis frame, access at front left (driver’s side) PVC roll tarp 680 g/m² with quick release and aluminium winding tube, (with vertical rear closure with extension triangle front and rear, centre tube welded in the tarp) Brake system/Pneumatics Steel air reservoir Spring-pressure gauge Automatic lowering when tipping Wabco brake system 2S/2M Chassis paint Chassis painted RAL 7021 (black grey) Body paint Body painted RAL 7001 (silver grey) Dedswz Auyepfx Ag Dekk Tarpaulin colour RAL 9006 (white aluminium) Hydraulics HYVA hydraulic cylinder, eye mount on top Hydraulic connection kit 1? Electrics Partial LED lighting LED reversing lights, 2 pcs 2x 7-pin, 1x 15-pin with EBS connector, without connecting cables to tractor unit Partial LED Aspöck-EUROPOINT III lighting 2 LED work lights on landing legs Auxiliary systems Tipping angle indicator Control line for lift axle from driver’s cab The system is designed for semi-trailers and trailers and monitors tyre pressure and tyre temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (pressure and temperature) mounted on the rims and a device connected to the EBS. Reflective warning plates Partial contour marking with Wielton logo Partial white contour marking on sides Partial red contour marking at rear Wielton warning stickers Warranty The manufacturer offers a 24-month warranty on the vehicle.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: silver, Year of construction: 2021, The images are archived; the vehicle may still be in use! Semi-trailer chassis for freight forwarding Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219, 2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension, Dkodpswhp A Dsfx Ag Dek without lift axle These images are archive images; the vehicle may still be in use!