Used Erosion Machine for sale (65,182)

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Lredpfx Alezu S U Hsmjr Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 29130000062, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed length X-axis: 90,000 mm, feed length Y-axis: 90,000 mm, feed length Z-axis: 90,000 mm, nominal power (apparent): 73 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,600 mm, total length: 4,000 mm, total width: 3,500 mm, table width: 650 mm, table length: 950 mm, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, input current: 125 A, DECKEL MAHO DMC 75 V LINEAR CNC Vertical Machining Center Ledpfx Aszld Nqelmsrr - Frequency: 50/60 Hz - Tool holder: HSK 63 - Table with six slots and a GARANT zero-point clamping plate, plate dimensions: 360 x 360 mm - Including 3D measuring probe - Including chip conveyor Note: The machine can be transported on a truck up to 3000 mm wide! Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B Plananlage 125 spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min max. torque on the spindle 1410/2000 (100/40 % ED) Nm total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. Lrodpfx Alezvm Hyjmer A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 Ljdpfx Aeyzh Uljlmerr - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: new, functionality: fully functional, The LAKIDIS MLG200L Grinder is an ideal machine for food industry professionals seeking both power, consistency, and hygiene in meat processing. Thanks to its high-performance grinding system, it processes fresh or semi-frozen raw materials without compromising texture or quality. As such, it is perfectly suited for cutting rooms, industrial butcheries, or ready meal manufacturers. This grinder particularly stands out for its ability to deliver consistent results, even at high capacities. Its generously sized hopper, combined with a robust feed auger, ensures a continuous production flow. As a result, you reduce downtime and increase productivity effortlessly. Moreover, the MLG200L fully complies with current hygiene standards. Entirely constructed from stainless steel, it is easy to clean, minimizing the risk of cross-contamination. Its ergonomic design also allows for quick and safe handling. Additionally, this machine integrates easily into existing production lines. It is suitable for various meat formats, whether deboned, minced, or slightly frozen. It is therefore a strategic choice for enhancing product quality while optimizing your processes. In summary, the LAKIDIS MLG200L Grinder offers an excellent combination of robustness, efficiency, and ease of use. Technical data: Ljdpewxadyofx Almorr Processing capacity: up to 3,500 kg/hour Motor power: 15 kW, three-phase Hopper: 200 liters, with safety lid Frame: food-grade 304 stainless steel, corrosion-resistant Dimensions: approx. 1,250 x 700 x 1,350 mm

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Lsdpfezuyh Iox Almerr Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2012, Travel range: Lrjdpfxjzt Rg Se Almer X 750mm / Y 500mm / Z 400mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, wire diameter range: 0.15mm - 0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Available for immediate delivery.

Condition: used, Mechanical machine vice, WMW Type SX 200 Year of manufacture: 1986 Jaw width: 200 mm Jaw height: 63 mm Lrsdpfx Alozvyvzemor Clamping range: 0-303 mm Guide rail height: 90 mm Dimensions: 650 x 200 x 152 mm Weight: 70 kg Good condition

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control system: Mitsubishi - 64-bit CNC Generator power: 70 Amps - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up plate changer Work tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire EDM machine GANTRY 1200 HSJ / 64-bit, manufactured in 2006, has undergone a comprehensive and professional overhaul in our facility and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts were carefully inspected. The following overhaul work was performed on the above-mentioned machine: Replacement of the ball screw and ball bearings of the X, Y, and Z axes. Replacement of all (4) ball screws of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to the OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire work tank, including replacement of the felt wipers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator, and control system. Lodezgckvspfx Almerr Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units, and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is immediately ready for operation and is ideally suited for reliable production.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Heidelberg Plattenabkante // Platebender, Year: 2008 Lredpjzcuzyjfx Almsr equipped: - suitable for Heidelberg SM / CD - Plate bender --> available: immediately, in stock

Condition: repair required (used), functionality: not functional, We are offering this 3X HP Latex 365 digital printing machine, year of manufacture unknown, which requires repair. 3 machines, sold as a package. Not immediately operational. Various faults. Perfect for dismantling or as a trade-in. Manufacturer: HP Model: Latex 365 Condition: requires repair Category ID: 177 Type ID: 976 Lsdezv Skkspfx Almerr Type: Digital printing machine If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2008, Maximum workpiece outer diameter 3420 mm Minimum workpiece inner diameter 630 mm max. module 30 mm control Siemens Sinumerik 840 D Workpiece tooth width - max. 600 mm tip circle diameter 440 mm Milling arbour diameter 80 mm x-travel 1110 mm y-travel 1300 mm spindle turning speed - stepless 18 - 180 U/min rotary table speeds infinitely variable 0 - 6 U/min Ring stength 500 mm total connected load 100 kVA weight of the machine ca. 38 t dimensions of the machine ca. 8,41 x 9,05 x 5,19 m Feed rate: - X-axis 1 to 3000 mm/min Ljdpjztz Ruofx Almsrr - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min - Tool 18 to 180 - Workpiece table 0 to 6 Equipment/accessories: - IFK2 internal milling head - Milling arbor with spacer discs - Chip conveyor - Oil mist extraction - Dry machining only - Technical documentation

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand large-format system/plotter, the “Oce ColorWave 3500” Item for sale: 1 x Oce ColorWave 3500 Meter readings: Total: Approx. 1,850 m² Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Lredpfjzvpl Sox Almor Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, counter reading (black): 2,497,865, counter reading (color): 12,004,727, Equipment: documentation/manual, raster image processor, We are offering this immediately available, ready-to-use RICOH Pro C9100 digital printing machine, manufactured in 2016, for sale. Features: Very well-maintained. Always serviced by Ricoh. Always using original spare parts/toner. • Vacuum feeder for tray 3-4 • Large-capacity output tray + trolley • Standard finisher with stapling • Fiery Color Controller E-83 • Fiery Color Profiler Suite • ORU set (Operator Replaceable Units) • Toner Meter reading as of August 17, 2026: Color: 12,004,727 B/W: 2,497,865 Ledpezv Sc Hofx Almjrr If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Quin Systems PTSM322 Mini Machine Manager, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lrjdji Ecl Djpfx Almjr

Year of construction: 2011, condition: used, overall weight: 50,000 kg, total length: 9,500 mm, total width: 8,000 mm, total height: 5,200 mm, Working Area X-axis travel 3,900 mm Y-axis travel 2,940 mm Z-axis travel 1,100 mm B-axis (swivel head) 90° freely interpolating NC rotary table Ø 2,800 mm Max. workpiece weight 15,000 kg Spindle Tool holder SK 50 Spindle power 63 kW Max. torque 200 Nm Max. speed 6,000 min⁻¹ Feed Rapid traverse X/Y/Z 30 / 30 / 25 m/min Feed force 9,000 N Tool magazine Tool positions 20 Max. tool diameter 110 mm With free adjacent positions 180 mm Max. tool length 400 mm Rotary Table Clamping surface Ø 2,800 mm Max. transport load 15,000 kg Tangential moment 40,000 Nm Tilting moment 90,000 Nm Electrical connection values 3 × 400 V / 50 Hz Equipment HEIDENHAIN iTNC 530 HSCI NC rotary table Ø 2,800 mm Freely interpolating swivel head Portal design Full enclosure Automatic central lubrication Coolant system Chip conveyor Control panel on swivel arm Control: HEIDENHAIN iTNC 530 HSCI Travel X-axis: 3900 - mm Dimensions (LxWxH) approx.: 9500 x 8000 x 5200 mm 5-axis machining: Yes Travel Y-axis: 2940 - mm Movement B-axis: 90 - ° NC rotary table: Yes Travel Z-axis: 1100 - mm Weight approx.: 50,000 kg Lredpfx Aozwa Rnolmer Year of construction: 2,011 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2019, machine/vehicle number: 0191, For sale: Fenstek Emerald F260, a 4-axis CNC profile machining center from 2019, designed for the precise machining of long aluminum and plastic profiles. Thanks to its working range of up to 7,000 mm and the powerful 9 kW HSD spindle, this machine is particularly suitable for window, door, and facade production. The machine comes from a professional production environment, has been well maintained, is damage-free, and is fully operational. Inspection and a demonstration under power are possible. Key specifications: - Axes: X / Y / Z / A, 4-axis interpolation - Control: PA8000 - Spindle: HSD, 9 kW - Maximum speed: 24,000 rpm - A-axis rotation: +90° to -90° - Working range: up to 7,000 mm, depending on the clamping configuration - Tool magazine: ISO30, 9 positions Ledpfox R U Eiox Almerr - Operations: milling, drilling, tapping, grooving, and chamfering - Suitable materials: aluminum profiles, light alloys, and uPVC An interesting machine for companies that want to machine long profiles flexibly and in a single setup.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: July 2026 Top condition, very few operating hours (1540 hours of EDM operation) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual EDM with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High-speed jump max. 18,000 mm/min. Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Ljdpszvctpjfx Almjrr Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Sinker EDM machine – in excellent technical and visual condition The machine has undergone a comprehensive and professional overhaul at our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check were performed using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good visual condition. Lrsdsyrqpfjpfx Almjr The generator and control system were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideally suited for reliable production operation. Technical data: Ingersoll (OPS Ingersoll) Sinker EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld control unit Manual erosion with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amperes, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer: 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 1

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug Lsdpfezwb R Njx Almerr - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Lrsdpeyi A Tdofx Almjr

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: B-7270, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, TECHNICAL DATA Manufacturer: KONDIA Model: B-1050 Year: 2004 Control unit: Heidenhain iTNC530 Serial number: B-7270 TABLE DIMENSIONS Work area: 1200 x 500 mm. T-slots (Nº x Width x Distance): 5 x 18 x 100 mm. Table to floor height: 885 mm. TRAVEL X: 1,000 mm. Y: 500 mm. Z: 610 mm. SPINDLE Spindle taper: BT40 Speed range: 12,000 rpm Distance spindle to table surface: 140-750 mm. FEEDS Cutting feed rate: 0-30,000 mm/min Rapid traverse rate: 30,000 mm/min ACCURACY Position accuracy (scales): 0.01 Repeatability: 0.006 Lodozlycyepfx Almerr Resolution: 0.001 MOTOR Spindle motor: 7.5 Kw. AUTOMATIC TOOL CHANGER Nr. of tools: 18 Max. Ø (adjacent tools): 85 mm. Max. Ø (non-adjacent tools): 135 mm. Max tool length: 250 mm. Max. tool weight (1 tool): 6 Kg. Tool taper: ISO 7.388 / BT40 Pull stud bolt: ISO 7388-1 / 2-AJIS B 6.339 WEIGHT Aprox. Weight: 5,500 Kg.

Condition: ready for operation (used), For sale: 1 x IDEAL 4850-95 EP cutter/guillotine/paper cutting machine, made in Germany, in good working condition. Lrodpfjzcyldox Almor

Condition: used, Dimensions (L/W/H) 2350x1050x1200 mm machine weight ab. 890 kg Second-hand machine Features and technical specifications: - 4-blade planer knife shaft - Feed speed 7.5/15 m/min - Planer: - Working width: 500 mm Lodjzk Np Hjpfx Almorr - Total table length: 2200 mm - Motor: 4 kW - Thickness: - Minimum working height: 3 mm - Max. working height: 235 mm - Maximum chip removal: 8 mm - Digital height adjustment display with decimal readout Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2003, Milling machines Travel distance X: 415 mm Travel distance Y :340 mm Travel distance Z: 355 mm HSC-machines Number of axis: 3 milling machine / machining center Lrjdpfx Aszv Sb Nslmsr Control: Heidenhain iTNC 530 spindle chuck: HSK 40 E spindle revolutions: 42000 rpm table size X: 470 mm table size Y: 400 mm max. workpiece weight: 500 kg tool changer: 30 - time Rapid traverse: 30 m/min electronic handwheel