Used Ergotech for sale (42)

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Pgedpexz Ah Rofx Ag Dow Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Pedpfxextmp Nj Ag Dsgw

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) Psdpfsxxrr Tox Ag Dogw - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 878 0730, clamping force: 2,500 kN, clearance between the columns: 630 mm, mold height (min.): 330 mm, ejector force: 69,000 N, ejector stroke: 200 mm, opening stroke: 675 mm, plate length: 950 mm, plate width: 950 mm, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,100 kg, heating capacity: 27 kW (36.71 HP), pressure: 190 bar, pump power: 4,500 W, power: 72 kW (97.89 HP), type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, input current: 167 A, Equipment: documentation/manual, Technical Specifications – Demag Ergotech 250/630–1450 Clamping force: 2,500 kN Tie bar spacing: 630 × 630 mm Maximum opening stroke: 675 mm Minimum mold height: 330 mm Maximum mold height (with WA): 710 / 830 mm Platen size (H×V): 950 × 950 mm Maximum mold weight: 3,300 kg Maximum weight of moving mold half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Injection volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater output (screw cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power Supply Pump unit: 37 / 45 kW Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Maximum current consumption: 167 A Dimensions & Weight Pedsw Hq Hhspfx Ag Dsgw Overall length: 6,500 mm Overall width: 1,900 mm Overall height: 2,300 mm Machine weight (net): 13,100 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 50,000 h, Demag Ergotech-Concept 1000/500-600 Year of construction 2007 NC4 control system Operating hours: approx. 50,000h (pump) Screw diameter 50 mm Fuel weight: approx. 359gr/hp Pgjdpfxewnz Edj Ag Dsw Spar distance 500 x 500mm Machine weight: 5700kg Extras: 1x core pull & handling interface Machine is free! Subject to alterations, prior sale and errors excepted!

Year of construction: 2001, condition: excellent (used), Year of manufacture 2001 Closing force 50 ton Pgodsf Tiq Sjpfx Ag Dsw Screw diameter 25 mm Injection pressure 2000 bar Shot weight. 54 gr Core pulls 4

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5*1.50*2 m Weight: 4t Pedpfx Agonfu I Ie Djgw Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 879 1 0052, clamping force: 3,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Pgedpfxoxtmpvs Ag Dsw

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech injection molding machine ERGOtech 100-420-200 NC4 built in 2001 Negotiable price: €12,500.00 - WITHOUT Wittmann peripheral devices The injection molding machine is in very good condition and ready for immediate use. The ERGOtech 100-420-200 NC4 injection molding machine is for sale. Optionally including all associated Wittmann peripheral devices for an additional charge. We purchased the Demag ERGOtech for a customer order as part of our company expansion in 2020 and equipped it with the appropriate Wittmann peripheral devices. The machine was serviced on site by a DEMAG service technician and has no defects. Due to technical problems with the power supply at our house connection in the company building, we are unfortunately unable to operate the injection molding technology together with other machine tools in our company as desired. Unfortunately, we are undersupplied with the power supply options in our production building. Unfortunately, an expansion of the power output cannot be implemented at our location for economic reasons. OPTIONALLY we also sell all Wittmann peripheral devices: Pgjdjtltvzepfx Ag Dow Peripheral devices WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 - dual-circuit temperature control device TEMPRO-PLUS-D-Standard-2-160 DEMO UNIT - used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW(2.4A)60l 1 pc. Flow measurement - ultrasound 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control device Negotiable price: €6,980.00 Wittmann compact cooling device Coolmax C30 WITTMANN WATER COOLER SERIES: COOLMAX C30 DEMO UNIT - used, no defects Negotiable price: 4,750.00€ WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 piece DRYMAX-PRIMUS: E30-70-M for drying plastic granulate - 2 pieces FEEDMAX-S:3NET for conveying free-flowing plastic granulate, hinged lid with integrated collector motor - 1 piece FUNNEL: MT203 Machine hopper 203 for setting up a separator of the 200 series - 1 piece DOSIMAX: MC 18 dosing device for free-flowing granulate Condition - NEW - Unused VB price: 8,467.00€ All prices are plus statutory VAT of 19% ATTENTION: The offer does not include moving or transport costs for the machine. These can be offered and organized as an additional service. If you have any further questions, please feel free to contact me personally at any time.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 864 3 0066, clamping force: 8,000 kN, screw diameter: 95 mm, clearance between the columns: 1,120 mm, displacement volume: 2,801 cm³, injection pressure: 1,832 bar, injection weight: 2,011 g, mold height (min.): 500 mm, ejector force: 138,000 N, ejector stroke: 350 mm, opening stroke: 1,030 mm, plate length: 1,620 mm, plate width: 1,500 mm, total length: 10,600 mm, total width: 2,700 mm, total height: 2,700 mm, overall weight: 33,500 kg, heating capacity: 42.6 kW (57.92 HP), pressure: 190 bar, pump power: 412,000 W, power: 149 kW (202.58 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 329 A, Equipment: documentation/manual, Model: 800/1120–5200 Machine: Demag Ergotech System Type: Injection moulding machine Year of manufacture: 2005 Clamping force: 8000 kN Locking force: 8800 kN Opening stroke: 1030 mm Mould height min./max.: 500 / 1050 mm Platen size (H × V): 1620 × 1500 mm Clear tie bar spacing: 1120 × 1000 mm Max. mould weight: 10,800 kg Ejector stroke: 350 mm Ejector force: 138 kN Ejector retraction force: 58 kN Screw diameter (average): 95 mm Shot volume: 2801 cm³ Injection pressure: 1832 bar Shot weight (PS): 2011 g Pjdpfx Aexa D Uvsg Djgw Installed barrel heating: 42.6 kW Electric screw drive: 51 kW Oil tank capacity: 1300 l Pump output: 412 l/min Pump unit: 133 kW Installed total power: 133–149 kW Pressure: 190 bar Net weight (without oil fill): 33,500 kg Overall dimensions (L × W × H): 10.6 × 2.7 × 2.7 m Total weight clamping/injection unit: 7500 kg Continuous sound pressure level: 70 dB(A) Connection: 3 × 400 V, 50 Hz, 329 A

Condition: good (used), Year of construction: 1999, Demag Ergotech systems 500/200 Closing 50 TO Year 1999 Scrow 30 mm Pgodog Emvtjpfx Ag Djw Spraying weight approx 90 distance between tie bars 35,5x35,5

Condition: good (used), Year of construction: 2007, operating hours: 74,627 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, plate length: 710 mm, plate width: 630 mm, Machine was in use until December 2024! TECHNICAL DETAILS Screw diameter: 70 mm Injection pressure: 1,877 bar Displacement: 1,212 cm³ Clamping force: 3,500 kN Mold holder Distance between the tie bars: 710 x 630 mm Minimum mold thickness: 330 mm Maximum tool thickness: 710 mm Maximum distance between the clamping plates: 1,385 mm Pgsdpfx Asvvtpljg Djw MACHINE DETAILS Total length: 7,700 mm Total width: 2,000 mm Total height: 2,300 mm Total weight: 16,000 kg EQUIPMENT - Documentation - Manuals

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 878 0643, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,090 g, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,800 kg, pressure: 190 bar, pump power: 45,000 W, input frequency: 50 Hz, input voltage: 400 V, input current: 173 A, Equipment: documentation/manual, Machine: Demag Ergotech System Machine type: Injection moulding machine Clamping force: 3000 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection pressure: 1877 bar Shot weight: 1090 g Overall length: 6.5 m Overall width: 1.9 m Overall height: 2.3 m Total weight: 13,800 kg Psdpfx Agsw U Dp Ds Dsgw Pump output: 243 l/min Pump drive: 45 kW Installed total power: 64–72 kW Pressure: 190 bar Connection: 3 × 400 V, 50 Hz, 173 A

Condition: excellent (used), Year of construction: 1997, Demag Ergotech 150-440/610 Pjdpfx Agjd N Ux Ds Degw Closing 150 TO NC 4 Scrow 40 mm BJ 1997 Tie bars distance 50x50 Lifting volumes 255 cm Spray-softened 230 g

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, Clamping Unit Clamping force 4200 kN Injection Unit Screw diameter 70 mm Pgedpfx Asxuazzsg Dsw This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Podpfx Ajxz Agyeg Dsgw Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 106 cm³, injection pressure: 2,750 bar, overall weight: 5,000 kg, screw conveyor diameter: 30 mm, electric dosing: 15 kW electrc clamping: 9,8 kW You can find all technical data on our homepage! Pedeh Nvnwopfx Ag Djgw Payment: 100% prior to delivery Manufacturer: Demag Type: Ergotech EL EXIS S 6 Condition: technisch überarbeitet CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 350 mm Mould installation height min.: 160 mm Mould installation height max.: - Tie bar distance (h x v): 370 x 370 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: - Screw diameter: 30 mm Injection weight in polystyrol: 100 g Stroke volume: 106 cm³ Einspritzdruck: 2.750 bar CONTROL: NC4 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: - Pump drive power: 5,5 kW Total installed power: Motor + Heizung Total weight: 5.000 kg Total size L x B x H: 4,6 x 1,5 x 2,0 m

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN Pgsdpfx Agjwvkgmj Dow

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Pgedpfx Ast Dx Hbog Djw Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Pgodpfxewm Iz Ao Ag Djw Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg

Year of construction: 2004, condition: ready for operation (used), This DEMAG Ergotech System 150/500-840 was manufactured in 2004. It features a complete injection unit with a ø50mm and ø60mm bimetal screw, both highly wear-resistant. Equipped with four hydraulic core pullers, a pneumatic valve, and a Euromap interface for handling. Consider the opportunity to buy this DEMAG Ergotech System 150/500-840 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Pgedpfx Aexvfkdog Djw Injection Moulding

Condition: used, Rexroth AKP71 Ergotech 60-80t- compatible with Ergotech 60-80t - removed from Demag ET 6 system - with Rexroth valve R900720216 - removed from running machine - fully functionalmanufacturer: Rexroth type: AKP71 spare part no.: 1 manufacturer no.: R900751367 Pjdpfjrr Eg Nox Ag Degw type code: SYDFEE-2X/071R-PRA12KD3-0000-A0A1VX2-006 (SYDFEE-20/071R-PRA12KD3-0000-A0A1VX2-006)The digit before the first slash describes the unit series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Dition: gebraucht

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 100 kN Psdpfx Agewvkgge Degw

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Pgodpfxsxpyt Ho Ag Djw Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Rexroth AKP45 Ergotech 60-80t- compatible with Ergotech 60-80t - removed from Demag ET 6 system - with Rexroth valve R900720216 - removed from running machine - fully functionalmanufacturer: Rexroth type: AKP45 spare part no.: 1 manufacturer no.: R900751366 type code: SYDFEE-2X/045R-PRA12KD3-0000-A0A1VX2-006 (SYDFEE-20/045R-PRA12KD3-0000-A0A1VX2-006)The digit before the first slash describes the unit series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Pedpforr Ef Dex Ag Degw Dition: gebraucht