Used Ergometrics 900 for sale (4,562)

Condition: used, Year of construction: 1980, centre distance 900 mm Guodpfxsztfzke Adtoi 440 weight of the machine ca. 3 t

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Gjdpfx Ajxv D Dcjdtoui Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Year of construction: 2019, condition: used, Chain crane with trailer Manufacturer: TGT Type: Robby 900 XL Year of manufacture: 2019 Gusdszuz Ngepfx Adtji Technical data - Palfinger crane 1500 - Forklift lift of 1.8 m - Outriggers fully hydraulic - with KTL coating - installed on a crawler chassis - telescoping chassis width - Working height: approx. 6.5 m - Tare weight: approx. 1700 kg - Fork load capacity: 2000 kg - Crane load capacity: up to 900 kg - Quick-change system for switching between crane and forks - Honda engine Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Tank Ausgestattet mit: Schauglas im Oberboden Kombinationsventil Reinigung/Co² Scheibenventil DN32 Nw32 Number available (price per tank): 7 Guodpfx Ae Aikmnedtsi Diameter [cm]: 90 Height [cm]: 210 capacity liter: 900 Technical data: Volume (liter): 900 Diameter (cm): 90 Height with feeds (cm): 210 Tank type: Pressure tank Material: Stainless steel V2A AISI 304 x Level indicator: Sight glass Support: On legs

Condition: used, machine/vehicle number: 2001 5170, For sale is a KUPER FWJ 900 veneer assembly machine manufactured in Germany. The machine is in good, well-maintained used condition and is immediately ready for professional use in veneer processing. The FWJ 900 operates with glue threads and hot air and is suitable for assembling or joining veneer sheets. The machine has an overhang of 900 mm and is operated via a foot pedal. Technical data: Manufacturer: KUPER Type: FWJ 900 Machine number: 20015170 Overhang: 900 mm Process: Veneer assembly with glue threads Heating: Hot air Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4–2.0 mm Gusdpfsz Ep R Rjx Adtsi Operation: Foot pedal Stationary model Compressed air connection: available Includes a large work table in front of the machine Includes a work table behind the machine Inspection and functional testing possible while powered on The existing work tables offer a generous support area and are ideal for processing larger veneer sheets. The machine can be inspected on-site while powered on and its functionality can be tested.

Condition: used, Year of construction: 2002, Bandsaw with feed rollers, blade diameter: 900 mm, cutting width: 880 mm, cutting height: 700 mm, cutting speed: 1800 m/min. Blade length: 6550 mm, blade width: 25 - 80 mm, table size: 900 x 900 mm, with table tilting mechanism via handwheel and rack and pinion, with support roller stand, tiltable up to 45°. Three-phase motor: 11 kW. 4 dust extraction ports: 140 / 100 / 100 / 100 mm. Dimensions: 1980 x 1270 x 2825 mm. Weight: approx. 1050 kg. Location: Supplier. Gedpfx Aj Ai Hr Tedtoui

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, Mikron UMS 900 with internal coolant system and 4th axis Considering its age, the machine is in good condition and fully functional. A special feature is the machine’s internal coolant system and full-fledged 4th axis. In addition, it has an HF spindle from Fischer with a cooling unit that can be swiveled into position. Gusdpfjz Iz I Hsx Adtsi Equipment: - X-axis 900mm / Y-axis 630mm / Z-axis 500mm - Table dimensions: 1200x600mm - Internal coolant system through the spindle - Spindle speed max. 6300 rpm with SK40 - 4th axis as a rotary table, Hoffmann RWC 160 with jaw chuck - Tool changer for SK and HSK tool holders - HF spindle Fischer 42,000 rpm with HSK40 - Electric handwheel - Full protective enclosure - Complete documentation available - Control cabinet very clean - Many tool holders included The screen is not defective; the black shadows are due to the photography. Several components have already been renewed, e.g., the spindle bearings; the Y-axis has been overhauled. The absolute special feature is the internal coolant supply through the spindle! If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety feature: Photoelectric cell Gujdpfozxyfzox Adtei Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: used, Year of construction: 2011, Horizontal machining center Burkhardt + Weber Type/Model: MCX 900 Condition: Used Year of manufacture: 2011 Operating hours: 27,289 h Control system: Siemens 840D Technical data Working area and workpiece capacity Travel ranges X / Y / Z: 1,650 mm / 1,600 mm / 1,500 mm Interference circle: 1,850 mm across the entire X travel range Pallet size: 1,000 x 800 mm Max. pallet load: 3,000 kg Tilting moment for pallet machining up to 40,000 Nm Pallet design: T-slots Main spindle Tool holder: SK 50 Gear unit: 2-stage Spindle speed up to 8,000 rpm Spindle power: 37 kW (S1) Guode Afpniopfx Adtji Spindle torque: 1,220 Nm (S1) Tool management Magazine with over 200 tool positions Max. tool weight: 40 kg Tool tilting moment up to 120 Nm Tool taper cleaning Tool loading via the spindle Tool planning system on the spindle Mechanical drill break detection up to 750 mm Coolant system Coolant tank volume: 2,500 liters Paper band filter High-pressure coolant system: 70 bar Adjustable coolant pressure Cooling unit Flushing of pallet support Workpiece flushing Coolant spray gun Automation and hydraulics Linked to a robot cell Year of manufacture of the robot cell: 2013 Fixture hydraulics Hydraulic connection on the pallet changer Hydraulic connection in the working area Hydraulic connection to the pallets Hydraulic extension for clamping pressures over 60 bar Equipment: Process monitor iCut Collision monitoring system Brankamp CMS UPS 4-way light stack Quoted item: Shipping costs will be provided in a separate offer.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC drilling machine. Gsdsz Evfujpfx Adtjui

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Hersteller: NETSTAL Typ: SYNERGY2400-900 Baujahr: 2004 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Schneckendurchmesser: 50 mm Guodpfxoz Iz Hce Adtji Spritzteilgewicht: 377g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Roboter WITTMANN

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Hersteller: NETSTAL Typ: SYNERGY2400-900 Baujahr: 2004 Gsdpfoz I Agdjx Adteui Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Schneckendurchmesser: 50 mm Spritzteilgewicht: 377g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Roboter WITTMANN

Condition: used, all stainless steel with top hold down belt water circulation Gjdjz S Hvxspfx Adtjui net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: used, all stainless steel water circulation net belt length 9.000 mm net belt width 900 mm Guedpfxoz I N Stj Adtji adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 3.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm

Condition: used, Type ID 900 Guedpfx Adezzlr Estei Especially suitable for pasta twin shaft with paddles all stainless steel 2 motor: 2 x 4kW safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Main cylinder resealed. New hydraulic hoses. New hydraulic oil. Sub-oil motor. Plexiglass panels replaced. Guide rollers on the press plate readjusted. Gsdpfx Aey D Dr Sjdtsui Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: used, mileage: 14,000 km, power: 81 kW (110.13 HP), first registration: 12/1978, fuel type: diesel, overall weight: 6,500 kg, color: green, gearing type: mechanical, Year of construction: 1978, Equipment: all wheel drive, trailer coupling, U 900 Cabrio, fully restored, like new Tires: 405-70 / 20 Rear power lift Transmission: 6-speed dual-clutch Crawl gears Tilting cylinder Optional hardtop Power take-off (PTO) Gujdpfxsi R Ainj Adtoi Transfer gearbox Archive images, vehicle under construction First owner: Aviation Group

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 11,989 h, load capacity: 8,000 kg, lifting height: 3,750 mm, load center: 900 mm, fuel type: diesel, mast type: duplex, power: 87 kW (118.29 HP), total height: 3,180 mm, Equipment: air conditioning, cabin, hydraulically sliding cabin, lighting, pallet forks, sideshift, trailer coupling, Diesel forklift LINDE H80D-01/900 Year of manufacture: 2011 According to the hour meter: 11,989 hours 8 tons lifting capacity at 900mm load center 3.37 meters lifting height 3.18 meters mast height 3.37 meters overhead guard height 2.20 meters fork carriage width 2.60 meters fork length 87 kW Deutz 6-cylinder engine - FULLY EQUIPPED!! - Fork adjustment - Side shifter - Dual tires - Elevated special cabin - Cabin with hydraulic tilt - Reversing device - Rearview camera - Air conditioning - Radio - and much more... Immediately ready for use! Gujdjzrnf Nopfx Adtsi Original paint! Selling price: 19,900,-- net Delivery also possible!

Condition: used, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and the generous working area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Working area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Clamping table (rotary table): Clamping surface: 600 x 1,200 mm T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Gedpozcqcgjfx Adtoui Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150-liter capacity Machine weight: approx. 4,300 kg (including safety enclosure) Product video "Everything from a single source: We would be happy to offer you a suitable bank financing solution for your project." You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2027, functionality: fully functional, overall weight: 10,000 kg, Agro Bio Brichet Energy Solutions – A Leader in Biomass Processing Technologies Since 2010, Agro Bio Brichet Energy Solutions has been converting biomass into energy and valuable products. We supply complete turnkey briquetting, pelletizing, and granulating lines, with consulting, design, delivery, commissioning, service, and technical support. We represent more than 25 established European brands, including Briquetting Technology, MÜNCH-Edelstahl, La Meccanica, BS Bollareto, AM Tehnolog, General Dies, Gama Pardubice, Radviliskis Machine Factory, NPT Nawrocki, and Labora Energy. Because we are not tied to a single manufacturer, we can choose the right technology for each client's raw materials and objectives. We have completed more than 135 projects in Romania and Europe, including France and Austria, transforming straw, sawdust, compost, and agricultural residues into briquettes, pellets, organic fertilizers, animal feed, and bedding. We also offer drying, shredding, carbonization, fermentation, and recycling equipment. Our machines are automated and energy-efficient. In addition to the manufacturer's 2-year warranty, we provide a 3-year dealer warranty, for up to 5 years of coverage. We also offer advice on EU funding and financing. Starting prices are listed below; the final price depends on the configuration you choose. Sawdust Briquetting Line, 600 kg/h Turnkey sawdust briquetting line, 400–600 kg/h. Produces 70 mm briquettes from sawdust, wood shavings, and G25–G30 wood chips, without binders. Includes: 1 × BriqTech BT-065-500 press (35 kW), 1 × RM-71.55 hammer mill (55 kW), DAD-0.6-1.2 aerodynamic separator, 3 m³ homogenization hopper. PLC/HMI control. Optional: SPB-5 rotary dryer, automatic briquette cutter, and power-factor compensation. Price: €197750 net. Guodpfxj Akdhpj Adtji Sawdust Briquetting Line, 900 kg/h Turnkey sawdust briquetting line, 800–900 kg/h. Produces 75 mm briquettes from sawdust, wood shavings, and G25–G30 wood chips, without binders. Includes: 1 × BriqTech BT-070-800Max press (55 kW), 1 × RM-71.55 hammer mill (55 kW), DAD-0.6-1.2 aerodynamic separator, 3 m³ homogenization hopper. PLC/HMI control. Optional: SPB-10 rotary dryer, automatic briquette cutter, and power-factor compensation. Price: €218250 net. Sawdust Briquetting Line, 1,800 kg/h Turnkey sawdust briquetting line, 1,600–1,800 kg/h. Produces 75 mm briquettes from sawdust, wood shavings, and G25–G30 wood chips, without binders. Includes: 2 × BriqTech BT-070-800Max presses (2 × 55 kW), 2 × RM-71.55 hammer mills (2 × 55 kW), 2 × DAD-0.6-1.2 aerodynamic separators (2 × 25 kW), 3–5 m³ homogenization hopper. PLC/HMI control. Optional: SPB-20 rotary dryer, automatic briquette cutter, humidification system, and power-factor compensation. Price: €415450 net. Sawdust Briquetting Line, 2,700 kg/h Turnkey sawdust briquetting line, 2,400–2,700 kg/h. Produces 75 mm briquettes from sawdust, wood shavings, G25–G30 wood chips, and forest residues, without binders. Includes: 3 × BriqTech BT-070-800Max presses (3 × 55 kW), 3 × RM-71.55 hammer mills (3 × 55 kW), SPB-30 rotary dryer, 3–5 m³ homogenization hopper. PLC/HMI control. Optional: automatic briquette cutter and power-factor compensation. Price upon request! Sawdust Briquetting Line, 3,600 kg/h Turnkey sawdust briquetting line, 3,200–3,600 kg/h. Produces 75 mm briquettes from sawdust, wood shavings, G25–G30 wood chips, and forest residues, without binders. Includes: 4 × BriqTech BT-070-800Max presses (4 × 55 kW), 4 × RM-71

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min Gusdpfxsz Sb Rls Adtsi * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,025 h, fuel type: diesel, STILL RX 70 - 80/900 forklift Year of manufacture: 2017 Inspection – FEM 4.004 / 11.2027 Operating hours: 4025 DEUTZ engine Load capacity: 8,000 kg at a load center of 900 mm Own weight: 16,500 kg Mast: 2-stage telescopic mast Mast height: 2,860 mm Lifting height: 3,050 mm Cabin height: 2,685 mm Fork tines: 2,400 mm x 200 mm x 80 mm (FEM 4 A) Equipment: Comfort full cabin, with heating Free additional hydraulic circuit Gode Ahx Rnepfx Adtoui Side shifter (Kaup) Acoustic reversing warning LED reversing light Flashing beacon on the protective roof Twin tires at the front Durwen Langguttraverse Type LGT 80 Year of manufacture: 2021 Nominal capacity 8,000 kg at 600 mm load center Width: 4,000 mm Length: 2,400 mm Ideal for pipes, profiles and plates

Condition: good (used), Year of construction: 1995, Milling machine Gujdpsp Nnp Sofx Adtei

Condition: used, Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, Gjdpszg Eyaefx Adtoui which gives it the ability to "see," allowing it to handle assembly automation and inspection tasks with maximum flexibility. It works in collaboration with humans, sharing the same tasks without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a true plug & play solution. Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2006, operating hours: 20,679 h, load capacity: 8,000 kg, lifting height: 4,000 mm, load center: 500 mm, Kalmar DCE 8-900 (2006) – only 20,679 hours! Well-maintained and immediately operational Kalmar DCE 8-900 from our own stock, manufactured in 2006. Fully inspected by our in-house workshop and ready for real-world use. Why choose this machine? Lifting capacity of 8,000 kg Lifting height up to 4,000 mm (no free lift) Gsdezwvfuopfx Adtoui Overall height only 3,410 mm Standard visibility mast Pneumatic tires Available for immediate delivery from 2Bro Trading in Mol. Delivery throughout the Benelux region is possible.