Used Ergometrics 900 for sale (12,195)

Condition: used, Year of construction: 2006, Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Dkjdpfx Ajk Aa Nishusw Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus VAT from central warehouse Dr. Sonntag KG 97076 WÃ ¼ rzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, mileage: 54,780 km, power: 81 kW (110.13 HP), first registration: 06/1993, fuel type: diesel, color: blue, Equipment: tail-lift, * Our internal no.: 1127 * MB Unimog 417/20 * First registered: France - Utility company, in Germany since 2021 and inspected by MB. * Tail lift * Winch - Manufacturer: Werner u. Co. Maschinenfabrik GmbH Seilwindenbau * Very good tires * Battery replaced new at MB, 05/2025 * Year of manufacture: 1992 - First registration: 06/1993 * NEW trailer couplings (2 pieces) included loose. * Driver's door trim included loose, as well as a cover for the cockpit. * etc. * Chassis: clean * Engine: clean / dry * Very good overall condition Djdswvd D Eepfx Ahujkw * All information without guarantee * Subject to prior sale * Please refer to our General Terms and Conditions

Condition: good (used), Year of construction: 2008, functionality: fully functional, A used agglomerator from WEISS is being offered. Model: RL 900. Dkodpfjxl Rw Uox Ahusw

Condition: excellent (used), Precision lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: WEILER, lead screw lathe type commodor 42 -Machine bed: hardened -Turning length: 900 mm -Turning Ø over bed: 400 Dkodpexapm Rofx Ahuew -Turning Ø over support: 190 mm -Spindle bore: Ø 56 mm -Spindle speeds: 45 - 2000 rpm -Three-jaw chuck: Röhm Ø 200 mm -Four-jaw chuck: Röhm Ø 200 mm -Tailstock mount: MK3 -Drive: 4 kW -Accessories: 18x Multifix tool holder with rotating center see photos -Lathe dimensions: 2200/1300/H1410 mm -Weight of lathe: 1380 kg

Condition: new, Year of construction: 2013, total length: 2,200 mm, Tugger Djdpfx Ahsxd D U Dsujkw Genkinger EGS 900-SO Drive Electric Year built 2013

Condition: used, Gas dryer with steel belt. Device length: 8 meters. Dksdpfsxu U S Uox Ahusw

Condition: used, Year of construction: 2008, Transnorm roller conveyor 3170-900-850 RA2151 Make: Transnorm Roller width (RB): 850 mm Nominal/outer width (NB): 700 mm Length: 3170 mm Dedpferg Nz Hsx Ahuokw Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gearmotor R17 DT71D4/TH Eletrical Data: 380-500 V, 0,37 kW Conveying speed (v m/s): 0,2 Height frame: 140 mm including Motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 54,780 km, power: 81 kW (110.13 HP), first registration: 06/1993, fuel type: diesel, color: blue, Equipment: tail-lift, * Our internal no.: 1127 * MB Unimog 417/20 Dkedpfx Ahjwu N Elouow * First registration: France – Used by an energy supplier, in Germany since 2021 and serviced by MB. * Tail lift (LBW) * Winch – Manufacturer: Werner u. Co. Maschinenfabrik GmbH Seilwindenbau * Very good tyres * Battery replaced by MB in 05/2025 * Year of manufacture: 1992 – First registration 06/1993 * NEW trailer hitches (2 pieces) included separately. * Driver’s door trim included separately, as well as a cover for the dashboard. * etc. * Frame: clean * Engine: clean / dry * Very good overall condition * All information provided without guarantee * Subject to prior sale * Please refer to our terms and conditions

Condition: used, CNC universal tool milling machine HERMLE type UWF 900 E Dksdpfxswaaqie Ahujw Machine No. 10829, Year of manufacture 1995 CNC contouring control Heidenhain TNC 415 B NC software 280540, PLC software 277677 06 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 458 mm Spindle mount ISO 40 Distance table to spindle nose 40 to 440 mm Spindle speed 20 - 4000 rpm, continuously variable Feed rate 1 to 3000 mm/min Rapid traverse X and Y = 7 m/min. Z = 6 m/min. Spindle drive 7 kW Quill stroke (vertical head) 60 mm - Spindle speed via 2 gear stages and continuously variable via frequency converter - Hydro-mechanical tool clamping vertically and horizontally - Thread cutting without compensating chuck - Electronic handwheel - RENISHAW 3D scanning head - Coolant system adjacent, capacity approx. 130 liters - Automatic central lubrication system - Fixed angle table - Fully protective cabin - 32,279 recorded spindle operating hours - Pivoting control panel - Operating instructions and electrical diagram Space requirements L x W x H 2700 x 3500 x 2100 mm Weight 3 tons.

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 9,413 h, machine/vehicle number: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA - 6 cylinders - Machine weight: 17.5 tons - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m Dkedpfov Nhyfjx Ahujw

Condition: used, Year of construction: 2001, MAPPI AU 1F 1S 900 1800 O.4 R.S.A. – year 2001 Tempering furnace Dsdjxup Eijpfx Ahujkw Max. glass dimensions: 900x2000 mm Thickness: 4-19 mm

Condition: good (used), Year of construction: 1991, Travel range: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Spindle taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, measuring probe (defective) Dksdpfjwvif Usx Ahusw

Condition: used, Lippert belt conveyor GF 3150-900-700 RA2113 Technical data: Conveyor length (NL): 3150 mm frame width (NB): 900 mm belt width (GuB): 700 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Dsdpfx Ajpdv Rfshuokw Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), machine/vehicle number: 80290, Extraction capacity: 5500 m³ / h Negative pressure: 765 - 351 Pa Suction opening: 180 x 220 mm Outlet opening: 300 mm Ø Djdpfoft Siusx Ahuekw Speed: 1400 rpm Drive motor: 380 V, 5.3 kW Weight: 60 kg Required space: 720 x 680 x 350 mm

Condition: new, 900 mm 900 mm Dkedpfofg E Hpsx Ahuew 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, Year of construction: 2008, max. wheel diameter 900 mm gear width 450 mm Dedpfewzmp Uex Ahuokw max. module 10 min. module 1 min. number of teeth 8 milling cutter dia. x width 192 x 215 mm distance table / middle of spindle 910 / 630 mm distance bet. workpiece spdl. ctr-milling sp. 50 / 550 shifting 200 mm swivelling of milling head 240 Grad table diameter 700 mm table bore diameter 160 mm milling head speed 25 - 160 U/min total power requirement 21 kW change gears, arbors, shifting, 2-cut circle, chip conveyor, outer steady # with crowning device # in excellent working condition

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 9,000 kg, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, roll diameter: 1,400 mm, total width: 2,100 mm, total length: 2,400 mm, input voltage: 220 V, saw band length: 10,450 mm, saw band width: 206 mm, power: 90 kW (122.37 HP), empty load weight: 19,000 kg, cutting speed: 40,000 mm/min, Equipment: cabin, We are selling a complete sawmill line with a VTZ 1400 PLUS vertical band saw from Mebor. Dodpfexq Rgyjx Ahuekw The offer includes: - VTZ 1400 PLUS vertical band saw by Mebor - Heavy-duty log conveyor with loading arms - Log edger/canter BM900 by Mebor - Operator cabin for the vertical band saw - Roller and chain conveyors - Edging line VR800 S by Mebor with servo-driven, high-speed circular saw positioning - Twin-shaft multi-blade circular saw VC 900 D by Mebor - Waste conveyor line - Chipper shredder for waste TH200/500/3 by Rudnick & Enners - Sorting line 47-14 by Holzmatic

Year of construction: 2018, condition: good (used), Danmatic Decor Unit 900 topping conveyor Dedpfxouanwgs Ahuskw 2018, Stainless, décor unit 900, is designed for decoration of buns, rolls, full dough sheet products and more, brand new HMI touch screen Siemens panel, belt dimensions 2600mm x 880mm, mobile, 3Ph

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 6950-900-800 RA2310 Technical data: Conveyor length (NL): 6950 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): adjusrable with a frequency converter Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Dkodpjuppmiefx Ahuow For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 1970, condition: used, engine: 380 V, 5,5 kW space needed: 1200 x 1600 x 3200 mm Dkodpo Sxmiefx Ahuew weight: 1200 kg

Condition: used, Year of construction: 1998, operating hours: 55,800 h, A Reform CNC rotary table surface grinding machine is available. Segment head: 560mm, segment dimensions X/Y/Z: 94mm/38mm/180mm, number of segments: 10, segment head speed: 720rpm, rapid traverse: 2m/min. Rotary table diameter: 900mm, rotary table speed: 40rpm, new segment working height: 400mm, control: Siemens 805, operating hours: 55800h. Documentation available. On-site inspection is possible. Dsdpfxsxgdk Rs Ahuekw

Condition: good (used), Year of construction: 2006, control Rexroth Dkedpfx Aowzmriehuow

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and longitudinal splicing machine For 0.4 to 3 mm thickness with direct gluing. With pre-gluing of edges up to 5 mm. Machine used very little, available ex location. Features: - Separate electric motors for chain and glue application - Glue is applied to the edge of the newly inserted veneer strip, increasing the strength of the glued joint - Robust, durable stainless steel conveyor chain with weighing joints - Separate temperature, speed, and pressure adjustment - Quick and easily accessible glue reservoir for fast and simple refilling or cleaning - Multiple heating zones for individual temperature adjustment - Extended service life of glue reservoir due to integrated cooling unit - Infinitely variable feed speed INCLUDES GLUE COOLER Technical specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Dedpfx Ahow E Rfbouskw Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Year of construction: 1970, condition: used, Stand adjustable crosswise by hand: 600 mm Spindle on column manually adjustable in height: 1200 mm hydraulic automatic vertical movement: 900 mm Djdpfjb N Dgmex Ahuekw hydraulic automatic transversal movement: 200 mm maximum distance between table and spindle support (long spindle): 600 mm drive motor: 380 V, 2800 rpm, 5,5 kW table-Ø: 550 mm space requirement: 1600 x 1200 x 3200 mm Weight approx.: 1.2 t hydraulics: 2,2 kW; space requirement: 800 x 800 x 1200 mm; weight approx.: 300 kg

Year of construction: 2010, condition: good (used), machine/vehicle number: 182245, table mounting size: 500 x 1050 mm movements x/y/z: ca. 800/500/500 mm spindle taper: BT 40 ISA min./max. distance table/spindle: 100/650 mm spindle turning speed range: 8000 rpm number of tool positions: 24 pieces carriages: 5 - 6000 mm/min rapid move: ca. 15 m/min spindle drive: 11/15 kW electrical connection: 400 V, ca. 20 kVA kW space needed: 2450 x 2220 x 2780 mm weight: 5200 kg Dedjdbh Udopfx Ahuskw Delivery time: approx. middle April 2017