Used Envelope To Léger for sale (10,519)

Condition: used, mileage: 506,000 km, power: 265 kW (360.30 HP), first registration: 01/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro4, Year of construction: 2009, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MAN TGX 26.360 construction machinery transporter * First registration: 01-2009 * EURO 4 * Automatic transmission * Retarder Lasdpfx Amsyt U Dvsrsc * Lift/steering axle * 9-ton ramps * Suitable for transporting asphalt milling machines * More pictures and videos via Whatsapp * Information subject to change and prior sale reserved.

Condition: used, maximum load weight: 23,065 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 08/2008, next inspection (TÜV): 02/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to availability until final sale, errors, typos, and prior sale: Schmitz City Refrigerated Trailer (Vehicle 230) First registered: 08/30/2008 Type: SKO 20/LZG-13.4 FP 80/45 Permissible gross vehicle weight: 32,000 kg Unladen weight: 8,935 kg Payload: 23,065 kg Overall length: 13,550 mm Overall width: 2,600 mm Overall height: 4,000 mm Internal length: 13,400 mm Internal width: 2,500 mm Internal height: 2,400 mm Type: Ferroplast 2 x lashing rails, one above the other, in each wall Tail lift: BÄR, 3,000 kg capacity, at the rear Laodpfeyygbbsx Amrjc Refrigeration unit: Carrier Maxima 1300 5,279 operating hours Diesel Refrigeration unit 2 x 12-ton, 2-speed gear-driven winches Spare wheel holder Air suspension with new air springs in 2025 Air suspension with raising and lowering function Various minor damage from operation 2 x LED work lights, rear, on the sides + 2 x LED reversing lights Tires: 425/65R22.5, front approximately 40%, rear approximately 60/40% MOT (TÜV) valid until 02/, steerable axle Storage box, plastic Water tank Price: €3,250.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €5,000.00 is the District Court of Ludwigslust; for disputes exceeding this value, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Lajdpfx Amjvfy Sxjrjc Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3050 mm Distance between columns: 2690 mm Press force: 130 t CNC control: DELEM DA65 2 D graphic Adjustable backgauge Controlled axes: Y1 / Y2; X; R; I CNC table bending compensation: Wila Moducrown Hydr. Tool clamping at the top and bottom Pneumatic tool shifting Number of bending aids: 2 Installation height: 535 mm Stroke: 220 mm Thrust: 410 mm Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tons Accessories: Ljdpfxjwimvwo Amrsac 1 set of standard tools Condition: Good condition, tools in mint condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical data: Year of construction: 2000; revision in 2023 Working length: 3100 mm column width: 2650 mm Pressing force: 200 to CNC control: ESA S630, Windows Graphics 2D (new in 2023) Controlled axes: Y1 / Y2; X CNC table bending compensation: Wila Moducrown throat depth: 250 mm Lodjr Idvpjpfx Amroac Stroke: 200 mm Motor power: 15 kW Dimensions (length x width x height): approx. 3600 x 2200 x 2900 mm Weight: approx. 12 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Lajdpfjwml S Esx Amroc Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 Ljdeyxm Hzjpfx Amroac - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: used, mileage: 397,811 km, power: 130 kW (176.75 HP), first registration: 02/2019, fuel type: diesel, overall weight: 7,490 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, loading space volume: 44 m³, loading space length: 7,250 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, * ATEGO 818 L box truck, 7.25 m, with 1-ton tail lift * Side door, rear right * Vehicle reference number for customer inquiries: 4676 * Engine version Euro VI, with OBD-C * Active Brake Assist * Air conditioning * Lane Keeping Assist * Environmental badge (green) * Rear axle air suspension * Adjustable air deflectors * Full service history * Electronic Stability Program (ESP) * Driver airbag * Electronic braking system with ABS and ASR * Comfort driver's suspension seat * Electrically operated windows on both sides * Transmission G 71-6/9.20-1.0 * Mercedes PowerShift 3 Laedpfjy Tc Dfox Amrjc * Engine brake, standard system * Digital tachograph, EC type, rev counter, ADR certified * Cruise control * Two-seater * High storage console on engine tunnel * 25 l AdBlue tank * Work lights, maneuvering aid * Roof hatch/ventilation flap * Weight variant 7.49 t (3.4/4.6) * Main mirror, electric adjustment, driver’s side * Heater, electronic air supply unit * 120 l plastic tank, left side * 80 l plastic tank, left side * Engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm * Wheelbase 4820 mm * Tubeless tyres, 215/75 R 17.5 front/rear axle * ClassicSpace S-cab, 2.30 m, with tunnel * Stabilizer under frame, rear axle * Maintenance documentation * Pre-installation for tail lift control * No pre-installation for toll recording * Cab paint assignment, top coat line 2 * 2/3-door configuration No liability for typographical or clerical errors Sale to commercial customers only Errors and prior sale excepted; modifications, prior sale, and errors expressly reserved. Description is for vehicle identification purposes and does not constitute a warranty in the legal sense. The purchase agreement description is binding. * TOP SERVICE + QUALITY * We can provide you with a lease, financing, or hire-purchase offer Warranty insurance available on request with the insurer * TÜV / UVV tail lift / tachograph inspection and OBU device installation available locally through our partners * 30-day export license plates All export documents are possible, but must be requested individually * Toll-Collect registration available on site * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles in stock at all times

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Lsdpfx Amjyvzkijroac Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames.

Condition: used, mileage: 190,158 km, power: 330 kW (448.67 HP), first registration: 12/2016, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 12/2026, color: silver, gearing type: automatic, emission class: euro6, loading space volume: 45 m³, loading space length: 6,700 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, crane, parking heater, * Sun visor * ABS * ASR (traction control) * Radio * On-board computer * Cruise control * Hill start assist * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Central locking * Roof hatch * Driver comfort seat * Seat heating * Rear axle differential lock * Trailer coupling * Steering axle * 2-line air connection * Reversing camera * Auxiliary heater * Air dryer * Roof spoiler * Cool box * Amber beacon * Leading/steerable axle Laodpoy Sctdsfx Amrsc * 12-speed * Suspension: Full air suspension * Payload: 11,700 kg * Continuous brake: High Performance Engine Brake ----Special body: Crane: Palfinger PK 42002-SHF (Power Link Plus), max. lifting capacity 12.2 t, foldable, 7x hydraulic extension + jib PJ 060 with 3x hydraulic extension, working height approx. 30.5 m, radio remote control, fully hydraulic 4-point outrigger system, oil cooler, 6th + 7th control circuit to the front. Read-off load chart: Lifts at 4.5m-8.1t, 6.2m-5.6t, 8m-4.15t, 9.9m-3.15t, 11.9m-2.5t, 14.1m-2.05t, 16.4m-1.72t, 18.6m-1.5t, 21.5m-0.85t, 23.3m-0.77t, 25.2m-0.7t, 27.2m-0.65t.----Superstructure: flatbed, sliding tarpaulin left & right, sliding roof, hardwood floor, lashing points.----1st & 3rd rear axle as steering axle. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE TO BE PAID!!!! ALL DETAILS SUBJECT TO CHANGE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see imprint) form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales discussions.

Condition: used, mileage: 53,358 km, power: 129 kW (175.39 HP), first registration: 04/2024, fuel type: diesel, empty load weight: 3,972 kg, maximum load weight: 3,228 kg, overall weight: 7,200 kg, axle configuration: 4x2, wheelbase: 5,100 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, loading space volume: 34 m³, loading space length: 5,950 mm, loading space width: 2,495 mm, loading space height: 2,325 mm, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, tail-lift, CERTIFIED PRE-OWNED Standard model, color: White IC 194, unladen weight: 3972 kg, permissible total weight: 7200 kg, cargo area (L W H): 5.950 mm x 2.495 mm x 2.325 mm, cargo area volume: 34 m³, seats: fabric, interior color: anthracite, leaf-spring air suspension, 1 x airbag, tail lift, tachograph, electronic stability program ESP, co-driver's bench seat, radio, digital radio reception DAB, power steering, adjustable steering column, electric windows, exterior mirrors electric and heated, immobilizer, central locking with remote control, tinted glass, twin tires, cargo area floor: wood, spare wheel, daytime running lights, telematics system, speed limiter: 90 km/h, trailer coupling preparation 12V 13-pin, air conditioning compressor 170ccm, telematics system preparation, former rental vehicle, location: MUNICH / Your contact: Mr. Räpple / Tel.: Other vehicles in stock. Errors and changes excepted. Ljdjy Unabopfx Amreac

Condition: good (used), functionality: fully functional, year of last overhaul: 2026, We are selling a well-maintained Quadient DS600i envelope inserting machine. The machine consists of: - Tower Feeder with 2 stations, featuring CIS and Datamatrix reading - 1x insert feeder (up to A4) - Envelope inserting module - Output conveyor belt - Conversion with C4 float switch (sealing with demineralized water possible) Complete including matching base furniture Lodpfxey Du Eco Amrsac The machine operates flawlessly and has been continuously serviced by Quadient Counter reading: 3,617,695 The machine is in production but available immediately

Condition: new, functionality: fully functional, power: 127 kW (172.67 HP), gearing type: hydrostat, color: red, lifting height: 9,600 mm, tire size: 17,5-R25, axle configuration: 4x4, Year of construction: 2023, operating hours: 11 h, Equipment: additional headlights, air conditioning, all wheel drive, cabin, hydraulics, === KEY SPECIFICATIONS === Year: 2023 Operating hours: 11 h Condition: Unused Max. lifting capacity: 13,500 kg Max. lifting height: 9.60 m Max. reach: 5.20 m Drive: Diesel Transmission: Hydrostatic (2 forward / 2 reverse) Four-wheel drive: Yes Steering modes: 2-wheel / 4-wheel / crab steering Stabilizers: No Cabin: Enclosed (ROPS/FOPS Level 2) Heated cabin: Yes Fork length: 2,400 mm Tyres: 17.5-R25 rough terrain Engine manufacturer: Yanmar 4TN107FTT-6SMU1 Emission class: Stage V (Tier 4 Final) Weight: 19,950 kg CE certification: Yes === HIGHLIGHTS === New 2023 model with Stage V engine 13.5 t lifting capacity and 9.6 m lifting height Robust ROPS/FOPS Level 2 cabin with excellent visibility Full CE certification and documentation included === CONDITION === Unused – only 11 operating hours. Fully inspected and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, the Netherlands. Ljdpfx Aexdavdomrsac Price on request (EXW / excl. VAT). === DELIVERY === Crane loading available upon request. Transport and logistics professionally handled by the Collé Rental & Sales team. === ADDITIONAL EQUIPMENT === Attachments available from stock: hook, jib, heavy duty buckets.

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 t / DEMO unit / in stock and immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brushwood and woody material up to 10 cm Ø - For excavators from 5 to 10 tons - Suitable for mounting to various adapter plates - Drive designed for hydraulic motor, depending on the carrier's oil flow - Indirect V-belt drive with 5 V-belts - Reinforced chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 – Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg Ljdpfxoy Rdnae Amrjac OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 – 58 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required oil flow in l/min (min-max): 60 – 130 Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate - Approx. 200 mm height We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a wide range of Seppi products, available for immediate delivery! Please contact us for more information at / . Financing options available upon request. We are official sales and service partners for: - Seppi M. - Holp - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi range! Errors and prior sale excepted! Internal reference number: 170051 = Further information = Please contact Marius Herden for more details.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200145, 2004 Buhrs BB300 Envelope Insertion Machine (with Intelmail VAF front end) Sr Nr: 200145 8 Station model currently running 6 AT25 rotary feeders with an MTS Sure-feed SE1200 PS/PC in the position of the last 2 hoppers. Spare AT25 rotary feeder & AS25 Shuttle feeder. Intelmail VAF front end fully integrated by Intelmail at supply in 2004. Buhrs specification: Envelope format: Standard envelopes with window min. C6 - 114 x 162 mm / 4 1/8 x 9 1/2 inch (No.10) DL-110x220mm max.B4 - 250 x 353 mm / 9 ¾ x 13 ½ inch flap length: max.: 55mm / 2 ¼ inch, min.: 20 mm / ¾ inch Paper quality (envelope): min. 75 gsm, max. 110 gsm Thickness of supplement material: max. 9 mm, / 3/8 inch Supply conveyor: min. 150mm / 6 inch, max. 330 mm / 13 ½ inch Paper quality (supplement material): min. 70 gsm VAF specification: Ljdpfx Ameyfwgdsrsac Power requirements Voltage 110 - 240 volts A.C. Frequency 50 - 60 Hz Phase Single Power 200 Watts Thermal 170 Joules/s Physical Dimensions (Approx) - Length 1650 mm - Width 530 mm - Height 1200 mm - Weight 140 kg (308 lbs) General Sound Level 72 dBA Fold Unit - Letter fold sets: Up to 8 pages 85 gsm, [22lb]; Half fold sets: Up to 12 pages 85 gsm, [22lb] Paper Size range 145 x 180 mm to 296 x 420 mm Feed and Read Rate 50,000 + sheets per hour. [A4 sheets] Form sizes / A4 up to A4 [and A3 half folded] Paper Weights 60 - 200 gsm

Condition: used, mileage: 1,335 km, power: 382 kW (519.37 HP), first registration: 12/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Lajdpox Txw Iofx Amrsc Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch Lsdpfx Amjx I T Ukjroac 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Condition: used, mileage: 1,335 km, power: 382 kW (519.37 HP), first registration: 12/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic Lasdex I T Taepfx Amrec 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Condition: used, mileage: 431 km, power: 184 kW (250.17 HP), first registration: 03/2026, fuel type: diesel, overall weight: 17,500 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: red, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New M.A.N. TG3 17.5-ton 4x4 all-wheel drive special roll-off tipper with registration date in 03/2026. Payload 9.3 tons, container lengths from approximately 4.0 meters to approximately 5.50 meters, wheelbase 4.50 m, all-wheel drive 4x4 with 3 differentials, single tires, high chassis, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, tow hitch, and more. With MAN manufacturer's warranty. Equipment: Cab: TN double cab with 3 seats High chassis Wheelbase 4,500 mm Single tires Engine: MAN D0836 LFLBN with 250 hp Euro 6 e Drive: 4x4 Differential lock in front and rear axle Unladen weight: 8,135 kg Payload: 9,365 kg with a gross vehicle weight (GVW) of 17,500 kg Roll-off tipper: Hiab XR 10 S Container lengths: from approx. 4.00 m to approx. 5.50 m Hydraulically extendable rear underrun protection Hydraulic internal locking Hook height: 1.57 m Roll-off tipper control unit with cable extension 2 additional frame tipper supports 2-stage control for extending and retracting Transfer gearbox: MAN G102 with road and off-road mode Electronic transfer gearbox lock management (VSM) Transmission: MAN PowerMatic 08.13 OD automatic transmission Auxiliary drive: OPN0L Medium Duty ISO 21308 Transmission function: MAN Idle Speed Driving Driving program: MAN TipMatic Efficiency Driving program: MAN TipMatic Offroad Driving program: MAN TipMatic Emergency Air conditioning Water auxiliary heater, 4 kW Tow hitch: Ringfeder type RF40/G150B with air pressure connections Permissible total weight: 28,000 kg Trailer load: 16,845 kg Trailer load, center axle trailer: 16,000 kg Front and rear axles: leaf-sprung Front axle: 9,000 kg as an outer planetary axle, switchable, with differential lock Rear axle: HP-1333, 13,000 kg, single tires on the rear axle, with differential lock Axle ratio, i=6.00 Stabilizer for front and rear axle Ljdpfx Ajxc Apwomreac Shock absorbers on front and rear axle Electronic braking system (EBS) High-performance engine brake MAN EVBec Hill start assist MAN EasyStart Drum brakes on front and rear axles ASR ESP ABS Emergency brake assist (EBA) Front detection Tire pressure monitoring system (TPM) with tire temperature display Driver attention assistant MAN AttentionGuard Preparation for alcohol interlock Cruise control Multi-function steering wheel 150-liter fuel tank Roof hatch Daytime running lights LED Rear lights LED Stone chip protection for headlights Electrically adjustable and heated exterior rearview mirrors Driver's seat package Premium, air-sprung, passenger seat package Plus Driver comfort seat, air-sprung, with lumbar support and shoulder adjustment Comfort center seat, air-sprung, with integrated seat belt system, moved back Passenger comfort seat, air-sprung New vehicle with registration date in 03/2026 with MAN manufacturer's warranty. Price NET, plus 19% VAT. We will be happy to provide you with attractive financing options. All information is without guarantee. Errors and prior sale are subject to change. Internal vehicle number: 2562

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Lsdpsx I T Tgefx Amreac Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Condition: used, mileage: 1,335 km, power: 382 kW (519.37 HP), first registration: 12/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles Laodpfex I T Tmox Amrsc MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Condition: used, mileage: 431 km, power: 184 kW (250.17 HP), first registration: 03/2026, fuel type: diesel, overall weight: 17,500 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: red, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New M.A.N. TG3 17.5 to 4x4 all-wheel-drive special roll-off tipper with initial registration in 03/2026 Payload 9.3 tons, container lengths from approx. 4.0 meters to approx. 5.50 meters, wheelbase 4.50 m, all-wheel drive 4x4 with 3 differentials, single tires, high-roof design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer hitch, and more. With MAN manufacturer's warranty Equipment: Cab: TN double cab with 3 seats High-roof design Wheelbase 4,500 mm Single tires Engine: MAN D0836 LFLBN with 250 hp Euro 6 e Drive: 4x4 Differential lock in front and rear axles Unladen weight 8,135 kg Payload 9,365 kg with a gross vehicle weight of 17,500 kg Roll-off tipper: Hiab XR 10 S Container lengths from approx. 4.00 m to approx. 5.50 m Hydraulically extendable rear underrun protection Hydraulic internal locking Hook height 1.57 m Roll-off tipper control unit with cable extension 2 additional frame tipper supports 2-stage control for extending and retracting Transfer case MAN G102 with on-road and off-road gears Transfer case lock management electronically (VSM) MAN PowerMatic 08.13 OD automatic transmission Auxiliary drive OPN0L Medium Duty ISO 21308 Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency Driving program MAN TipMatic Offroad Driving program MAN TipMatic Emergency Air conditioning Water auxiliary heater, 4 kW Trailer hitch, drawbar coupling Ringfeder Type RF40/G150B with air pressure connections Permissible gross train weight 28,000 kg Trailer load 16,845 kg Trailer load, center axle trailer 16,000 kg Front and rear axles leaf-sprung Front axle 9,000 kg as an external planetary axle, switchable, with differential lock Rear axle HP-1333, 13,000 kg, single tires on rear axle, with differential lock Axle ratio, i=6.00 Stabilizer for front and rear axles Shock absorbers on front and rear axles Electronic braking system EBS High-performance engine brake MAN EVBec Hill start assist MAN EasyStart Drum brakes on front and rear axles ASR ESP ABS Emergency braking assistant EBA Front detection Tire pressure monitoring system (TPM) with tire temperature display Driver attention alert MAN AttentionGuard Preparation for alcohol interlock Cruise control Multi-function steering wheel 150 liter fuel tank Roof hatch Laodpexc Ap Djfx Amrsc Daytime running lights LED Rear lights LED Stone chip protection for front headlights Electrically adjustable and heated exterior mirrors Driver comfort seat package Premium air-suspended, co-driver comfort seat package Plus Driver comfort seat air-suspended with lumbar support and shoulder adjustment Comfort center seat air-suspended with integrated seat belt system, offset to the rear Co-driver comfort seat air-suspended New vehicle with initial registration in 03/2026 with MAN manufacturer's warranty Price NET, plus 19% VAT. We will be happy to provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2562

Condition: new, mileage: 472 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGS 33.510 BB 6x4 CH chassis truck, first registration 05/2025, 33-ton variant, 6x4 drive, wheelbase 3.30 m, 510 HP, with PTO, air conditioning, refrigerator, trailer coupling, gross train weight 59 tons, with ATS warranty, and much more. MAN ATS warranty until 25/09/2026 Trade tonnage: 33 tons Permissible gross weight: 26,000 kg 28,000 kg permissible total vertical load (Tech. Plus) Medium-high design TN long cab with 1 sleeper bunk and rear wall window Diesel engine with 375 kW (510 HP) output and 2,600 Nm torque, Euro 6 D Drive: 6x4 Wheelbase: 3,300 mm, rear frame overhang: 800 mm Differential locks on rear axles MAN TipMatic 12.28 OD transmission Gearbox PTO, transmission-dependent, type NH/4c, without flange, f=1.14, position approx. 2:30 High-performance engine brake MAN EVBec, adjustable MAN EfficientRoll transmission function Rock-free function (transmission) Transmission suitable for increased traction proportion during driving MAN Idle Speed Driving gearbox functionality MAN TipMatic Performance and Efficiency drive programs up to 70,000 kg MAN TipMatic Offroad drive program up to 70,000 kg MAN TipMatic Manoeuvre (shunting mode) drive program MAN EasyStart hill-hold control Full brake assist ABS, EBS, ASR, ESP Leaf-sprung front and rear axles Front axle: 9,500 kg, rear axle: 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 ROCKINGER coupling type 400 G 150A with air connections for trailer loads up to 40,000 kg (Tech. Plus) 59,000 kg permissible gross train weight (Tech. Plus) Climatronic Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 LED beacon lights on cab roof LED taillights and daytime running lights 2 LED outline/side marker and turn signal lights Preparation for reversing camera Extendable refrigerator in cab Ledpfx Amey T Tv Sorjac Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl control panel, 2 functions, operable from outside with the door open Driver’s comfort seat, air-cushioned, heated, with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN SoundSystem MAN Advanced Media System Navigation 7-inch New vehicle with day registration on 13/05/2025 and MAN ATS warranty until 25/09/2026 Net price plus 19% VAT. Attractive financing options upon request. All information without guarantee. Subject to prior sale and errors excepted. Internal vehicle number: 2509

Condition: new, mileage: 431 km, power: 184 kW (250.17 HP), fuel type: diesel, overall weight: 17,500 kg, axle configuration: 2 axles, color: red, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New M.A.N. TG3 17.5 ton, 4x4 all-wheel drive, special hooklift truck with day registration in 03/2026 Payload: 9.3 tons, container lengths from approx. 4.0 meters to approx. 5.50 meters, wheelbase 4.50 m, all-wheel drive 4x4 with 3 differentials, single tires, high configuration, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer coupling, and more. Lasdpfx Amsxdgllerjc With MAN manufacturer's warranty. Equipment: TN double cab with 3 seats High configuration Wheelbase 4,500 mm Single tires MAN D0836 LFLBN engine with 250 hp Euro 6 e Drive: 4x4 Differential lock in front and rear axle Unladen weight: 8,135 kg Payload: 9,365 kg with GVW 17,500 kg Hooklift: Hiab XR 10 S Container lengths from approx. 4.00 m to approx. 5.50 m Hydraulically extendable rear underrun protection Hydraulic internal locking Hook height: 1.57 m Hooklift control unit with cable extension 2 additional frame hooklift supports 2-stage control for extending and retracting Transfer gearbox MAN G102 with on-road and off-road gears Transfer gearbox lock management electronically (VSM) MAN PowerMatic 08.13 OD automatic transmission Auxiliary drive OPN0L Medium Duty ISO 21308 Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency Driving program MAN TipMatic Offroad Driving program MAN TipMatic Emergency Air conditioning Water auxiliary heater, 4 kW Trailer coupling, Ringfeder type RF40/G150B with air pressure connections Permissible total weight 28,000 kg Trailer load 16,845 kg Trailer load, center axle trailer: 16,000 kg Front and rear axles with leaf springs Front axle 9,000 kg as an external planetary axle, switchable, with differential lock Rear axle HP-1333, 13,000 kg, single tires on rear axle, with differential lock Axle ratio, i=6.00 Stabilizer for front and rear axle Shock absorbers on front and rear axle Electronic braking system EBS High-performance engine brake MAN EVBec Hill start assist MAN EasyStart Drum brakes on front and rear axles ASR ESP ABS Emergency brake assist EBA Front Detection Tire pressure monitoring system (TPM) with tire temperature display Attention warning system MAN AttentionGuard Preparation for alcohol interlock Cruise control Multi-function steering wheel 150-liter fuel tank Roof hatch Daytime running lights LED Rear lights LED Stone chip protection for front headlights Electrically adjustable and heated exterior mirrors Driver seat package Premium, air-suspended, co-driver seat package Plus Driver comfort seat, air-suspended with lumbar support and shoulder adjustment Comfort center seat, air-suspended with integrated seatbelt system, shifted backwards Co-driver comfort seat, air-suspended New vehicle with day registration in 03/2026 with MAN manufacturer's warranty Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2562

Condition: new, mileage: 431 km, power: 184 kW (250.17 HP), fuel type: diesel, overall weight: 17,500 kg, axle configuration: 2 axles, color: red, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New M.A.N. TG3 17.5 ton, 4x4 all-wheel-drive special roll-off tipper with registration date in 03/2026 Payload 9.3 tons, container lengths from approx. 4.0 meters to approx. 5.50 meters, wheelbase 4.50 m, all-wheel drive 4x4 with 3 locking differentials, single-tire configuration, high chassis, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer hitch, and more. With MAN manufacturer's warranty Equipment: Cab: TN double cab with 3 seats High chassis Wheelbase 4,500 mm Single tires Engine: MAN D0836 LFLBN with 250 hp Euro 6 e Lodoxdglrjpfx Amrsac Drive: 4x4 Differential lock in front and rear axles Unladen weight: 8,135 kg Payload: 9,365 kg with a GVWR of 17,500 kg Roll-off tipper: Hiab XR 10 S Container lengths from approx. 4.00 m to approx. 5.50 m Hydraulically extendable rear underrun protection Hydraulic internal locking Hook height: 1.57 m Roll-off tipper control unit with cable extension 2 additional frame tipper supports 2-stage control for extending and retracting Transfer gearbox MAN G102 with on-road and off-road gears Electronic transfer gearbox locking management (VSM) MAN PowerMatic 08.13 OD automatic transmission Auxiliary drive OPN0L Medium Duty ISO 21308 Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency Driving program MAN TipMatic Offroad Driving program MAN TipMatic Emergency Air conditioning Water auxiliary heater, 4 kW Trailer hitch, ring-type, RF40/G150B with air pressure connections Permissible total weight 28,000 kg Trailer load 16,845 kg Trailer load, central axle trailer 16,000 kg Front and rear axles with leaf springs Front axle 9,000 kg, driven as an outer planetary axle, can be engaged, with differential lock Rear axle HP-1333, 13,000 kg, single tires on the rear axle, with differential lock Axle ratio, i=6.00 Stabilizer for front and rear axles Shock absorbers on front and rear axles Electronic braking system EBS High-performance engine brake MAN EVBec Hill start assist MAN EasyStart Drum brakes on front and rear axles ASR ESP ABS Emergency brake assist EBA Front detection Tire pressure monitoring system (TPM) with tire temperature display Attention alert MAN AttentionGuard Preparation for alcohol interlock Cruise control Multifunctional steering wheel 150-liter fuel tank Roof hatch Daytime running lights LED Rear lights LED Stone guard for front headlights Electrically adjustable and heated exterior mirrors Driver's seat package Premium, air-suspended, passenger seat package Plus Driver's comfort seat, air-suspended, with lumbar support and shoulder adjustment Comfort center seat, air-suspended, with integrated seat belt system, positioned further back Passenger comfort seat, air-suspended New vehicle with registration date in 03/2026 with MAN manufacturer's warranty Price NET, plus 19% VAT. We would be happy to provide you with attractive financing offers. All information without guarantee. Errors and prior sale are subject to change. Internal vehicle number: 2562