Used Emergency Stop Button for sale (10,417)

Condition: new, 2000 mm Working width 360 mm Gisdpfxeupxuis Ai Nju Wheel width 360 mm roll diameter 60 mm 800 kg height adjustment 650 - 950 mm weight of the machine ca. 0,045 t dimensions 2,07 x 0,48 x 0,21 m Simple roller conveyor with 2000mm length.

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min Gsdpfx Aoxraucei Nsiu SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Year of construction: 2008, condition: excellent (used), Stromaggegat power generator Running - Ready for operation Gedpfxeium Eij Ai Nsiu Manufacturer: SDMO Type: R165 Year of manufacture: 2008 Power: 165 KVA Engine: John Deere 6068HFS73 Hours: 19.048 h

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 3 h, functionality: fully functional, machine/vehicle number: PG-D 1100 X-TEA, type of cooling: water, fuel: diesel, nominal power: 8 kW (10.88 HP), Equipment: chassis, Year of manufacture: 2022 Only 3 operating hours Includes wheel set Self-collection only Continuous output (active power): 5.4 kW at 230V / 8.0 kW at 400V Gisdpou D Abwefx Ai Neu Socket configuration: 1 x 230 V, 16 A / 1 x 230 V, 32 A / 1 x 400 V, 16 A - Sound-insulated diesel engine (compliant with noise and emission regulations) - Ergonomically positioned connections at the front in a control panel with voltmeter and hour meter - Full enclosure provides spray and impact protection - Electronic voltage regulation (AVR) - Thermal-magnetic circuit breaker protects against overload and short circuit due to faulty consumers or cables - Safe personnel protection via insulation monitoring (device does not require grounding) - Low-oil shutdown - Long operating times thanks to large 24 L fuel tank - High convenience with electric start - Water-cooled engine - Quality 'Made in Europe'

Year of construction: 2008, condition: not inspected (used), Emergency power Geko 6401 ED-AA/ZEDA, year of construction 2008, 2050 operating hours, diesel, 220/400 volt, ser.no.100821, engine runs but does not generate power Godpfxsgqfxre Ai Nsiu

Condition: excellent (used), Year of construction: 2007, Zeppelin Diesel Genset Type: PPO2000 - C32 Gsdpfsizbdajx Ai Neiu Serial No.: ZPSU1023; Arr.No: 273-9683; Year: 2014; Voltage [V]: 400; Rating [kW]: 1600; Rating [kVA]: 2000; speed [RPM]: 1500; Frequency [Hz]: 50; SMU [hrs]: 0; Application: prime; Layout: Canopy; condition: pre-owned; Notes: Diesel Engine 2 * CAT C32 PPO, new Stamford HC6J alternator, with ComAp automatic Panel Inteli Compact, 2 x circuit breaker, 4000 L in two fuel tank, Jacketwater heater. L/W/H: 11 m,/ 2,3 m/ 3,2 m, weight. 26t, Import duty unpaid.

Condition: used, suitable for Peddinghaus profile steel shears Giodpst Iyx Hjfx Ai Nou useful length 2,000 mm

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1425, table length: 3,300 mm, Urban sash stop station with fittings rack Screw feed unit S 330 Gsdpfx Aoyk Rv Aji Nsiu Milling unit FE 330 for milling out the lock case Hardware punching unit BS 330 with stop system for central and consistent handle position Olive drilling unit GOB 330 with hydropneumatic feed including accessories for spindle size adjustment

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg Giedpjwc Rk Ejfx Ai Nou ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Gisdpewc Ri Iefx Ai Nju Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: excellent (used), Year of construction: 2009, Marel scale. Type - START/STOP Scale. Year of manufacture - 2009. Gjdpoh Nvd Hjfx Ai Noiu Conveyor dimensions - Length - 85cm. Width - 60cm. Height - 90cm. / adjustable height. 3 pcs. in stock. Price is per piece. DANP.20.

Condition: used, Year of construction: 1974, operating hours: 474 h, functionality: limited functionality, overall weight: 3,500 kg, power: 280 kW (380.69 HP), MWM Diesel Emergency Power Generator 280 kW - Piller Generator We offer an emergency power generator for sale. ⭐︎ Condition: The generator is used and in good condition. ⭐︎ Condition: good (used) Fully functional and well maintained! Recently dismantled! MWM Generator Set 280 kW ++ incl. electrical control cabinet + battery Manufacturer: MWM, Germany Engine: - Manufacturer: MWM - Engine type: TBD 232 V 12 - 12 cylinders - Turbocharged - Diesel - Water-cooled - 1500 rpm Generator: - Manufacturer: Anton PILLER (Germany) - 280 kW - 231 / 400 Volt - 50 Hertz - Operating hours meter: 474 hours Condition: - The generator was used occasionally for backup power in a public building - It has only run 474 hours - Regular maintenance and test runs have been carried out ⭐︎ For further technical details, please see the photos. Scope of delivery as shown Viewing before purchase is possible and expressly encouraged. All items are dismantled, cleaned, and visually inspected for damage by our qualified staff before sale. All relevant data/information can be found in the description and images. All information is given to the best of our knowledge and belief. The offered item is sold as described and as inspected. International buyers welcome Giodpewv Uzujfx Ai Nju Please ask for shipping costs to Europe and overseas Scope of delivery: - MWM generator set 280 kW - Electrical control cabinet Shipping: - Nationwide shipping within Germany is possible at extra cost - To provide an exact freight quote, please send an inquiry with your postal code

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Gisdpfswc Afhjx Ai Nsu Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: ready for operation (used), An emergency power generator with a diesel engine is available. 1) 2-cylinder V-engine, power: 290HP, speed: 1000rpm, dry weight: 4000kg. 2) Synchronous generator ELIN S2506, power: 250kVA. 3) Control cabinet ELIN. 4) Compressed air system. Includes spare parts for the valve train, sealing systems, etc. Documentation available. An on-site inspection is possible. Gsdow Emx Djpfx Ai Njiu

Condition: like new (used), Year of construction: 2009, Stop system with handwheel and optical decimal display via magnifying glass, 3,000 mm measuring length as new / showroom piece The TOPROL-3 stop system is a convenient length measurement system. The system has been developed for use on aluminum circular saws. The readout is provided via a measuring tape with a magnifying glass. Length is set manually using a hand crank, and the stop carriage is manually clamped. The system comes complete with roller conveyor (plastic rollers) and has a standard measuring length of 3 meters. - Specific information: • Mounting on the "right" side of the machine, measurement increases from "left" to "right" • Total length 3,650 mm • Support width 190 mm • Travel distance 3,000 mm • Number of rollers: 7 support rollers and 7 vertical rollers • Weight: 65 kg Giedpfsw Suzxsx Ai Nou - Technical details: • Precise length adjustment thanks to magnifying glass • Plastic rollers ø 50 mm, width 190 mm • Vertical rollers ø 50 mm, height 140 mm • Load capacity up to 70 kg per meter • Positioning accuracy +/- 0.1 mm • Manual clamping • Support height from 940 to 1,050 mm • Stop arm can be folded up manually

Year of construction: 2015, condition: excellent (used), Used stop system with handwheel and digital display, 3,000 mm measuring length Lightly used, top condition The TMDG stop system is an efficient and convenient length measuring system. The system was specifically developed for use with our aluminium circular saws. The measurement is displayed via an easy-to-read display. The length is set manually using a handwheel, and the stop carriage is clamped manually. The system comes complete with a roller conveyor (plastic rollers)! Giedpfxjw Suxdo Ai Nju - Specific information: • Mounted "left" on the machine, measurements increasing from "right" to "left". • Total length: 3,500 mm • Support width: 300 mm • Travel distance: 3,000 mm • Number of rollers: 11 pcs • Weight: 95 kg • Heavy-duty support feet - Technical data: • Plastic rollers, ø 40 mm, width 300 mm • Load capacity: up to 70 kg per meter • Positioning accuracy: +/- 0.1 mm • Support height adjustable from 800 to 1,050 mm • User-friendly control panel • Stop arm can be manually folded up • Length measurement via electronic magnetic tape

Condition: excellent (used), Several RST button as shown in the offer. Gisdody Anrspfx Ai Neu Data and price: On request! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: excellent (used), Various Renishaw TP2, TP6, TP20gemäß figure in the offer. Data and price: On request! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! Gisdpfxody Anxj Ai Nju (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: excellent (used), Various Renishaw probe heads PH10M as shown in the offer. Godpfx Asdy Anvei Neiu Data and price: On request! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: excellent (used), Various Renishaw probe heads MIH as shown in the offer. The MIH is equipped with an automatic change recording for fast and reproducible button changes. Compatible with the most Renishaw measuring switches. An integrated LCD-position display for easy programming and storage of up to 20 measuring switch positions. Extensions can be used up to 300 mm. Technical data Weight 580 g Mounting of the measuring probe Auto recording (Note: not for probes with multi-channel technology) Mounting of the probe Godsdy Apmopfx Ai Noiu Shafts of MS series Interface 200 3 PI, PI 7-3 Measuring button status indicator LED Cable connection 5-pin DIN-180 ° connector Ability to index the A axis 0 ° to 105° in steps of 7.5 ° Indexing capability of the B-axis ±180 ° in steps of 7.5 ° Reproducibility of the positions (2s) 1 µm (TP6A with 21 mm button usage) Maximum extension 300 mm Maximum permissible torque 0.45 nm Technical data according to the manufacturer. Data and price: On request! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: new, Year of construction: 2025, functionality: fully functional, Exenso Comfort Automatic Length Stop • For use on cross-cut saws, drilling machines, punching presses, and more • Automatic positioning of the material stop • Stop and pusher modes available • Network-capable control unit with numerous software options and interfaces Godpfx Asxmh Uyei Neiu Ideal as an add-on to customer-owned saws or as a component in complete saw systems. Different adjustment lengths available – short delivery times! Customizable interfaces and software extensions possible. Contact us!

Condition: new, Year of construction: 2024, stock item immediately available consisting of: ᐳ Stop rail 3 m long ᐳ 2 complete stops Gjdpfx Aofnp Swji Noiu ᐳ 1 piece measuring scale right ᐳ left ᐳ 1 piece measuring scale left ᐳ right ᐳ Mounting screws - The scope of delivery does not include the wooden base strip 50 x 45 mm onto which the stop rail is screwed.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101258050, Submission of a bid constitutes an obligation for timely collection no later than 31/12/2025! The offer includes: Bacciottini Pit Stop WFD2H Speed (Serial number: WFD2H 1010, Year of manufacture: 2010) MB PFNET 52/4-40-ART52 (Serial number: 101258050) TECHNICAL DETAILS Number of pockets: 4 EQUIPMENT 2-bar scoring system Inline Extended feeder MB folding machine Giedpfjxyh E Ssx Ai Nju Gatefold pocket Delivery

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 221055-1, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 2,430 mm, total length: 12,080 mm, total height: 2,880 mm, fuel: diesel, overall weight: 18,000 kg, continuous power (apparent): 770 kVA, continuous power: 616 kW (837.53 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 16,400 cm³, fuel tank capacity: 9,000 l, tank capacity: 9,000 l, power: 616 kW (837.53 HP), nominal power (apparent): 770 kVA, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, EPS-C40 770S - 72h Container Emergency Power Supply Unit: AVAILABLE IMMEDIATELY!!!! GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS Rated power PRP: 700.0 kVA, 560.0 kW cos Phi = 0.8 Rated power LTP: 770.0 kVA, 616.0 kW cos Phi = 0.8 Reference conditions according to DIN ISO 8528 Speed: 1500 rpm Design: Stationary Engine: Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation returned to the engine block, fuel system with pre-filter, filter, and water separator, combustion air filter with vacuum indicator, fuel hoses for connection of supply and return lines with flexible transition. Electric starter, engine shut-off device, and electronically governed speed regulator. Rated power: 596.0 kW Rated speed: 1500 rpm Cylinders: 8-cylinder V Displacement: 16,400 cm³ Giodjvyp H Ujpfx Ai Neu Leroy Somer LSA 49.3 M6 4-pole three-phase synchronous generator Continuous output: 730.0 kVA at 40°C Rated voltage: 400V Rated frequency: 50Hz Manual engine oil change pump from 700 kVA Manual pump for emptying the engine oil pan. Electric engine preheater 1000W up to 700 kVA 1.00 unit The preheated coolant circulates in the primary cooling circuit of the engine via convection. Connected with flexible coolant hoses to the engine’s internal cooling circuit, equipped with shut-off valves for maintenance accessibility. Coolant recirculation pump ensures safe preheating of the engine. Walls and ceiling made from pressed steel plate. Derusting and cleaning accomplished by sandblasting the welded structure. The container is coated inside and out with marine-grade primers and paints for seawater resistance. Container 40" HC High Cube Soundproofed Container ISO 1496-1 for power generation units, external dimensions according to ISO 668. Wall and roof panels are insulated with self-extinguishing, oil- and water-resistant sound insulation material, enclosed with glass fibre matting and electro-galvanized coated perforated sheet metal cassettes. The exhaust silencer is housed in a separate compartment within the container. Radiant heat is safely discharged vertically with the cooling airflow from the front-mounted radiator. Air intake openings are installed in the wall surfaces; air exhaust outlet in the roof. The exhaust outlet of the silencer is protected by an exhaust flap against the ingress of water. One front side is equipped with double-leaf doors with circumferential sealing and serves as an inspection opening. Side personnel doors, with emergency release and circumferential sealing, provide access for maintenance work. The silencer and exhaust compartment is also fitted with an access door. Plant operation is performed externally. The control system and indicators can be viewed through an inspection window even when the door of the control panel is closed. The emergency stop button is protected from damage and mounted in a recessed housing niche. Cable entry can be made from the side or through the container floor. The floor entry is prepared for annular space seals DN 150. 40" Container collection tray according to WHG Oil-tight welded checker plate floor with surrounding upstand, min. 50 mm And much more… Special feature: MAINS PARALLEL operation possible!!!

Condition: used, Automatic start-stop shear manufactured by PROIN. It allows for cutting adjusted to the following specifications: - Strip width: 300 to 2050 mm - Material thickness: 2 – 10 mm - Tensile strength (Rm): maximum 600 MPa - Cutting length: 400 – 1200 mm The cutting speed varies depending on the strip's thickness: - Thickness ≤ 5 mm: 36 m/min - Thickness ≥ 5 mm and ≤ 10 mm: 18 m/min Material width: 300 – 2.050 mm Material thickness: 2 - 10 mm Tensile strength (Rm): maximum 600 MPa Giedpfjxdcylox Ai Nsu Length: 400 – 12.000 mm