Used Emergency Stop Button for sale (10,208)

Condition: used, Roller conveyor length 50 mm Roller conveyor width 300 mm roll diameter 50 mm Wheel width 300 mm Psdpfxswntz Ro Aa Esha height adjustment 480 - 530 mm weight 52 kg dimensions of the machine ca. 420 x 400 x 500 mm

Condition: excellent (used), Year of construction: 1996, operating hours: 250 h, functionality: fully functional, We have a 2000 KVA container generator for sale. Optionally 400/230 V (50 Hz) or 10 kV (+/- 5%) (50 Hz) Fully installed in two soundproof 40' HC containers. Suitable and intended for multi-layer installation. Dimensions: (L x W x H) 12020 x 2500 x 5800 mm Weight: approx. 33 t + 11 t Phedpfxewa Tg Do Aa Eea Engine: MTU 16v396 TB 34D Generator: A.v. Kaick DIDBN 130/125 h/4 2000 KVA Generator Engine and generator completely mounted on a base frame and connected via a flexible coupling. Cooling system: Separate table cooler installed as a dual-circuit cooler in the upper container, including temperature control, connecting lines (stainless steel cooling water lines with shut-off valves for each line), circulation pumps, control valves, etc. for safe operation. Tank system: 4000-liter tank system installed in the upper container, including system-specific accessories and complete piping. Air supply and exhaust system: Soundproof baffles within the air supply and exhaust chambers in the container. Air supply and exhaust openings each equipped with appropriate weather protection grilles, motor-operated blinds in the container that open automatically when the generator is in operation. Exhaust system: Insulated exhaust ducts within the container lead vertically from the container via silencers through the upper container, discharging the exhaust gases through the container roof. Switchgear: Medium/low-voltage switchgear for fully automatic emergency power operation!!! Optionally 400/230 V or 10 kV (+/-5%) Fully automatic machine monitoring with control for power failure detection, automatic start-up, and emergency power takeover. Upon power recovery, the system automatically switches back to the mains supply. In the low-voltage range, parallel operation with the mains/resynchronization is possible. Control for external mains switch - optionally 10 kV or 400/230 V Low-voltage switchgear equipped with: 3200 A generator switch (400/230 V) Medium-voltage switchgear equipped with: 115 A generator switch (10 kV) Technical data of the type-tested medium-voltage switchgear Panel type: ZS8 Rated voltage: 12 kV Operating voltage: 10 kV etc.

Condition: excellent (used), Year of construction: 1990, operating hours: 2,343 h, functionality: fully functional, machine/vehicle number: 51065506, nominal power (apparent): 2,125 kVA, Equipment: documentation/manual, Power Generation System 2125 kVA - Gas Turbine Phodpfx Aov E Nd Rja Eoa Track for liquid and gaseous fuels – Programmed for operation with liquid fuels.

Year of construction: 1970, operating hours: 1,433 h, condition: excellent (used), For sale is an emergency generator from MWM with 250KVA The emergency generator runs on diesel. The complete genset stands in a 20-foot container The emergency power generator has 1433std. Phjdpfsua Ai Dex Aa Eoa kVA250 Weight approx. 9000 kg Dimensions 6100x2450x2600 mm

Condition: used, suitable for Peddinghaus profile steel shears Psdpjt Iyx Hsfx Aa Ejha useful length 2,000 mm

Condition: new, ELMAG Mobile lighting and emergency power system MBNA 40 WDE - PREMIUM series - Stage V on trailer with manual lighting mast Comprehensive control panel - Comprehensive control panel with DSE7320 control module - Start/stop via push buttons (keyless) - Digital control panel for engine monitoring - Analog displays for the most important operating parameters - 2-stage insulation monitoring - No earthing spike required! - Full integration - no increased noise level when the door is open! - Operating elements for system control - All elements permanently labeled with laser engraved labels ADVANTAGES Socket connections: Direct supply 3 Schuko 16A 1 CEE 16A-5p 1 CEE 32A-5p 1 CEE 63A-5p Socket connections: System supply 1 CEE 63A-5p 1 CEE 125A-5p Disconnection: Emergency stop Fuel level Oil pressure Temperature automatic Overload ThM-SS per connection Generator: Synchronous control AVR control Protection class IP23 E Speed governor Psdpfjt H I R Ijx Aa Esha DSE7320 4 voltmeters kW meter 3 ammeter Hertzmeter Hour meter Fuel gauge Temp. display Oil drain pump Ambient lighting LED Lifting eyes Oil pressure indicator Trickle charge Light mast 5m manual Headlights 4x RP1000LED Tandem chassis

Condition: used, Roller conveyor length 10 mm Pedpfx Aaowntz Dj Eoha Roller conveyor width 275 mm roll diameter 40 mm Wheel width 275 mm height adjustment 500 - 570 mm weight 20 kg dimensions of the machine ca. 360 x 300 x 600 mm

Condition: excellent (used), Year of construction: 2007, Zeppelin Diesel Genset Type: PPO2000 - C32 Phsdpfeizbdasx Aa Eja Serial No.: ZPSU1023; Arr.No: 273-9683; Year: 2014; Voltage [V]: 400; Rating [kW]: 1600; Rating [kVA]: 2000; speed [RPM]: 1500; Frequency [Hz]: 50; SMU [hrs]: 0; Application: prime; Layout: Canopy; condition: pre-owned; Notes: Diesel Engine 2 * CAT C32 PPO, new Stamford HC6J alternator, with ComAp automatic Panel Inteli Compact, 2 x circuit breaker, 4000 L in two fuel tank, Jacketwater heater. L/W/H: 11 m,/ 2,3 m/ 3,2 m, weight. 26t, Import duty unpaid.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: unexamined, total width: 655 mm, total length: 785 mm, total height: 900 mm, fuel: regular/benzine 91, overall weight: 166 kg, continuous power (apparent): 12 kVA, continuous power: 10 kW (13.60 HP), rotational speed (max.): 3,000 rpm, noise level: 99 dB, fuel tank capacity: 45 l, Exhibition unit, year of manufacture 2023, TOP CONDITION With original packaging Short-term output up to 3 times the rated power Automatic Voltage Regulation (AVR) provides constant output voltage and enables the operation of sensitive equipment Overload protection via thermal circuit breaker Pjdpfx Asxm S H Tea Esha Low oil shutdown with warning lamp 3-in-1 display for voltage, frequency, and operating hours Long runtime thanks to large fuel tank Tank with fuel level indicator Ergonomically positioned connections on the front panel Easy transport thanks to wheel kit and robust foldable handles

Condition: used, pressing force: 1,500 t, pressure: 6 bar, operating pressure: 6 bar, space requirement height: 80 mm, space requirement length: 60 mm, space requirement width: 45 mm, stroke length: 60 mm, Alfamatic B-15 tromboline type mini press Ideal for assembly of prototypes and series, very easy to program Phodjv Hp Huspfx Aa Eea It has a CSQ Visual control system for processing force and travel data with various functions and the possibility of connecting to a computer

Condition: like new (used), Year of construction: 2009, Stop system with handwheel and optical decimal display via magnifying glass, 3,000 mm measuring length as new / showroom piece The TOPROL-3 stop system is a convenient length measurement system. The system has been developed for use on aluminum circular saws. The readout is provided via a measuring tape with a magnifying glass. Length is set manually using a hand crank, and the stop carriage is manually clamped. The system comes complete with roller conveyor (plastic rollers) and has a standard measuring length of 3 meters. - Specific information: • Mounting on the "right" side of the machine, measurement increases from "left" to "right" • Total length 3,650 mm • Support width 190 mm • Travel distance 3,000 mm • Number of rollers: 7 support rollers and 7 vertical rollers • Weight: 65 kg - Technical details: • Precise length adjustment thanks to magnifying glass • Plastic rollers ø 50 mm, width 190 mm • Vertical rollers ø 50 mm, height 140 mm • Load capacity up to 70 kg per meter • Positioning accuracy +/- 0.1 mm • Manual clamping Pedpfx Aasw Suzxs Esha • Support height from 940 to 1,050 mm • Stop arm can be folded up manually

Condition: new, ELMAG Mobile lighting and emergency power system MBNA 100 WDE - PREMIUM series - Stage V on trailer with manual lighting mast Comprehensive control panel - Comprehensive control panel with DSE7320 control module - Start/stop via push buttons (keyless) - Digital control panel for engine monitoring - Analog displays for the most important operating parameters - 2-stage insulation monitoring - No earthing spike required! - Full integration - no increased noise level when the door is open! - Operating elements for system control - All elements permanently labeled with laser engraved labels Pedpfxet H I Srj Aa Eoha ADVANTAGES Socket connections: Direct supply 3 Schuko 16A 1 CEE 16A-5p 1 CEE 32A-5p 1 CEE 63A-5p Socket connections: System supply 1 CEE 125A-5p Shutdown: Emergency stop Fuel level Oil pressure Temperature automatic Overload ThM-SS per connection Generator: Synchronous control AVR control Protection class IP23 E Speed governor DSE7320 4 voltmeters kW meter 3 ammeter Hertzmeter Hour meter Fuel gauge Oil drain pump Ambient lighting LED Lifting eyes Oil pressure indicator Temp. indicator Trickle charge Light mast 5m manual Headlights 4x RP1000LED Tandem chassis

Condition: used, Roller conveyor length 3000 mm Roller conveyor width 460 mm 0 3000 mm Working width 460 mm Wheel width 460 mm roll diameter 90 mm 0 6 St. work height max. 460 mm Pedpfx Aohuk T Tja Esha weight 280 kg dimensions of the machine ca. 3,05 x 0,75 x 0,65 m

Condition: used, Year of construction: 1974, operating hours: 474 h, functionality: limited functionality, overall weight: 3,500 kg, power: 280 kW (380.69 HP), MWM Diesel Emergency Power Generator 280 kW - Piller Generator We offer an emergency power generator for sale. ⭐︎ Condition: The generator is used and in good condition. ⭐︎ Condition: good (used) Fully functional and well maintained! Recently dismantled! MWM Generator Set 280 kW ++ incl. electrical control cabinet + battery Manufacturer: MWM, Germany Engine: - Manufacturer: MWM - Engine type: TBD 232 V 12 - 12 cylinders - Turbocharged - Diesel - Water-cooled - 1500 rpm Generator: - Manufacturer: Anton PILLER (Germany) - 280 kW - 231 / 400 Volt - 50 Hertz - Operating hours meter: 474 hours Condition: - The generator was used occasionally for backup power in a public building - It has only run 474 hours - Regular maintenance and test runs have been carried out ⭐︎ For further technical details, please see the photos. Scope of delivery as shown Viewing before purchase is possible and expressly encouraged. Phjdowv Uzuspfx Aa Eoa All items are dismantled, cleaned, and visually inspected for damage by our qualified staff before sale. All relevant data/information can be found in the description and images. All information is given to the best of our knowledge and belief. The offered item is sold as described and as inspected. International buyers welcome Please ask for shipping costs to Europe and overseas Scope of delivery: - MWM generator set 280 kW - Electrical control cabinet Shipping: - Nationwide shipping within Germany is possible at extra cost - To provide an exact freight quote, please send an inquiry with your postal code

Condition: used, functionality: fully functional, Height: 150 mm Total width: 640 mm Mounting width: 600 mm Phsdpfxow Uk E Ee Aa Eea Thickness: 5 mm Condition: Used / fully functional Function test: OK

Condition: new, Year of construction: 2024, stock item immediately available consisting of: ᐳ Stop rail 3 m long ᐳ 2 complete stops ᐳ 1 piece measuring scale right ᐳ left ᐳ 1 piece measuring scale left ᐳ right ᐳ Mounting screws - The scope of delivery does not include the wooden base strip 50 x 45 mm onto which the stop rail is screwed. Phsdpjfnp Swefx Aa Esa

Year of construction: 2015, condition: excellent (used), Used stop system with handwheel and digital display, 3,000 mm measuring length Lightly used, top condition Phedpfx Aajw Suxdj Esa The TMDG stop system is an efficient and convenient length measuring system. The system was specifically developed for use with our aluminium circular saws. The measurement is displayed via an easy-to-read display. The length is set manually using a handwheel, and the stop carriage is clamped manually. The system comes complete with a roller conveyor (plastic rollers)! - Specific information: • Mounted "left" on the machine, measurements increasing from "right" to "left". • Total length: 3,500 mm • Support width: 300 mm • Travel distance: 3,000 mm • Number of rollers: 11 pcs • Weight: 95 kg • Heavy-duty support feet - Technical data: • Plastic rollers, ø 40 mm, width 300 mm • Load capacity: up to 70 kg per meter • Positioning accuracy: +/- 0.1 mm • Support height adjustable from 800 to 1,050 mm • User-friendly control panel • Stop arm can be manually folded up • Length measurement via electronic magnetic tape

Condition: new, GEKO 7401 ED-AA/HEBA E-Start Generator 986552 Note: Currently 2 units immediately available from stock - subject to prior sale Equipment: Silent design with large air filter and large muffler, especially low noise. Control box operation opposite exhaust. Protected battery installation in the switch box. Automatic low oil shut-off. Fuel gauge. Operating time with one tank filling up to 11 hours. One CEE 16A-3ph. socket, one CEE 32A-1ph. socket, one Schuko socket. With start-up amplification that can be switched off. Generator asynchronous el. Power: 3~ cos φ 1,0 6580 VA el. Power: 1~ cos φ 1,0 5500 VA Voltage 3~ 400 V voltage 1~ 230 V current 3~ 9,4 A max. total current 1~ 24 A Current 1~ (CEE) 24 A current 1~ (Schuko) 16 A max. starting current cos φ 0,6 25 A 3~ (at 20% voltage drop) 40 A 1~ Frequency 50 Hz Protection class generator IP 54 Engine type Honda GX 390 Super Silent number of cylinders 1 Speed 3000 rpm Fuel type gasoline Engine oil capacity 1,1 l Engine power 7,5 kW Cooling engine/generator air/air Tank capacity 20 l Operating time: full load / half load 6 / 11 h Weight 107 / 115 kg with battery Dimensions L x W x H 740 x 500 x 530 mm Sound power level LWA 97 dB(A) Phodpfsgibvwex Aa Eea Sound pressure level (10m) 69 dB(A) GEKO dealer - please send us your inquiry

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Phedpfewc Ri Iox Aa Eea Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: ready for operation (used), An emergency power generator with a diesel engine is available. 1) 2-cylinder V-engine, power: 290HP, speed: 1000rpm, dry weight: 4000kg. 2) Synchronous generator ELIN S2506, power: 250kVA. 3) Control cabinet ELIN. 4) Compressed air system. Includes spare parts for the valve train, sealing systems, etc. Documentation available. An on-site inspection is possible. Phjdpow Emx Defx Aa Eja

Condition: used, Siemens Push Button Panel PP17-II 6AV3688-3ED13-0AX0 RA2393 Manufacturer: Siemens Components: Phodpjwa Eqnofx Aa Eja 1x 6AV3688-3ED13-0AX0 5x mounting clips VP 1x Profibus connector 3x plug connectors for 6AV3688-3ED13-0AX0 Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: refurbished (used), Year of construction: 1989, operating hours: 580 h, functionality: fully functional, machine/vehicle number: 8957, type of input current: three-phase, input voltage: 24 V, type of cooling: water, total width: 2,600 mm, total length: 12,100 mm, total height: 12,500 mm, fuel: diesel, overall weight: 20,000 kg, continuous power (apparent): 1,085 kVA, continuous power: 1,080 kW (1,468.39 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 47,520 cm³, noise level: 125 dB, fuel tank capacity: 1,500 l, power: 1,400 kW (1,903.47 HP), input current: 2,005 A, nominal power: 1,400 kW (1,903.47 HP), nominal power (apparent): 1,390 kVA, battery capacity: 220 Ah, input frequency: 50 Hz, ambient temperature (min.): -20 °C, ambient temperature (max.): 35 °C, controller model: CompAp, InteliLite4 AMF 25, Equipment: cabin, documentation/manual, parking heater, rotational speed infinitely variable, GENERATOR Manufacturer: Albari Power Systems Type: MTU 12V 396 TB34 1090 1500 Diesel engine for stationary generators and stationary work machines, Power generation in continuous operation (average utilization 75% over operating time), 50 Hz No.: 8957 Operating hours: 580 h Year of manufacture: 1989 Overhaul: 2023 Daily tank: 1500 liters Nominal voltage: 400 V Nominal frequency: 50 Hz Phi nominal: 0.8 at: 1500 rpm RATED POWER: Podpfx Aaswk I Dlo Eoha Standby: 1390 kVA / 1110 kW Prime: 1260 kVA / 1080 kW Measured: 1085 kVA at Cos. 1 WEIGHT Genset: 9540 kg Fan and operating materials: ~ 1500 kg Container: ~ 4000 kg Configuration: ~ 2500 kg Total: ~ 20 tons ----- DRIVE: Type: MTU 396 12 V Rated power: 1400 kVA Speed: 1500 rpm GENERATOR Type: Siemens Rated current: 2005 amps Rated power: 1400 kVA EQUIPMENT: Engine block heater: 2 kW Battery charger: 24 V Soundproof: yes Interior lighting: 2 Personnel doors: 2 Circuit breaker: ABB 4 P, type MS116-20 Control system: CompAp, InteliLite4 AMF 25 ----- DOCUMENTS: Engine: Technical documentation, Operating manual Generator: Operating manual Tank: Data sheet Switchgear: Data sheets

Year of construction: 2008, condition: not inspected (used), Emergency power Geko 6401 ED-AA/ZEDA, year of construction 2008, 2050 operating hours, diesel, 220/400 volt, ser.no.100821, engine runs but does not generate power Pjdpfx Aogqfxrsa Esha

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar Phsdpfx Ajwc Rk Eoa Eoa TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted Pjdpfx Aowc Afhsa Eeha SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.