Used Emco Fb 3 for sale (152)

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: A8A R19 52, turning length: 225 mm, turning diameter over cross slide: 250 mm, turning diameter: 80 mm, spindle motor power: 4,400 W, spindle speed (min.): 300 rpm, spindle speed (max.): 6,300 rpm, spindle bore: 25 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, bar diameter (max.): 25 mm, quill stroke: 50 mm, Equipment: documentation/manual, Additional info : 12-station tool turret for VDI16 quick change tools bi-directional logic for driven tools Gijdpfx Afoxvb Thonen

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min Gsdpfovwgpbjx Afnsin power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Gjdpfxsk Nk I No Afnsin

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Gsdpfx Afjk Nk Iwonoin

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Gedpfx Afew I S Uusnsin Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Gisdpfxsxp Iyhe Afnon Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional Giedowpkd Sjpfx Afnjn incl. accessories collet equipment is included

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Gjdpfx Afexp Hudjnjin

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Gsdpfxsw Rrvws Afnein Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 12 Gisdpfxowx R Rks Afnen tool shaft (cylinder shaft DIN 69880) VDI 25 speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant

Condition: used, Year of construction: 2017, Technical details: turning diameter: 500 mm turning length: 1.300 mm centre distance: 1.430 mm greates pass round over bed: 700 mm spindle bore: 106 / 95 mm tool taper: VDI 40 Giedpfxoyi Ercj Afnen spindle turning speed - stepless: 2.500 1/min max. torque on the spindle: 690 / 1040 Nm rapid traverse in x-y-z axis: 24 / 12 / 30 m/min drive capacity - spindle motor: 28/42 kW Tools speed: max. 4.000 1/min Torque: 45 Nm work piece power: 8 kW total power requirement: 46 kVA weight of the machine ca.: 11 t dimensions of the machine ca.: 6,6 x 2,25 x 2,15 m CNC Lathe with live tooling, Y-axis (-60/+80 mm), 12 pos. turret with 12 stations of live tools, c-Axis, Tailstock, MT 4, quill dia. 100mm, chip conveyer (right side), 3-jaw chuck, hydr. steady, lot of accessories, *

Condition: good (used), Year of construction: 1999, Emco lathe PCturn 120 with accessories and documentation Giodpfxjyhzfye Afnon

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm Gisdeyhcfkopfx Afnen • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: good (used), Year of construction: 2010, operating hours: 64,321 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck. Gedjx Hwfqepfx Afnjin

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S2A130951, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). Gjdjx Hwanjpfx Afnjin FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 300 mm, turning diameter: 430 mm, Control: Siemens 840D with Shopturn Max. Bar Capacity: Ø 45 mm Godpfx Afsyid H Aensin Max. Turning Diameter: Ø 300 mm Swing Diameter over Bed: Ø 430 mm Distance Between Main/Counter Spindle: 720 mm Travel Paths: X 160 mm / Z 510 mm / Y +40 / −30 mm Rapid Traverse: X/Y/Z 24 / 10 / 30 m/min Spindles Main Spindle Speed: 0–7000 rpm Counter Spindle Speed: 0–7000 rpm Drive Power: Main Spindle 15 kW / Counter Spindle 15 kW Max. Torque (at spindle): 100 Nm (main and counter spindle) Spindle Bore: Ø 53 mm Turret / Tools Tool Turret: 12 positions, VDI 25 Driven Tools: 12, speed 0–8000 rpm, power 4 kW, torque 16 Nm Square Shank Tool Cross-section: 16×16 mm, Boring Bars: Ø 25 mm C-Axis Resolution: 0.001° Rapid Traverse (C-Axis): 1000 rpm Spindle Indexing (disc brake): 0.01° Media / Installation Coolant Tank: 250 l Connected Load: 38 kVA Compressed Air: 6 bar Dimensions (without chip conveyor, L×W): 2662 × 1790 mm, Overall Height 2080 mm Machine Weight: approx. 4000 kg

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min Gsdpex Aq Hwsfx Afnsin

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: SIEMENS, controller model: 840-D, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, spindle speed (max.): 10,000 rpm, This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center. Additional equipment • 2-fold pallet changer • 1 spindle cooling • Linear guide • 30-fold tool changer incl. tool holders • Coolant preparation with cooling incl. filter unit • Screw chip conveyor • Fully protected cabin with safety doors, electrically fused Gsdpfxjyftgys Afnein • Ball screw in all axes Machine Benefits Technical Machine Benefits • Machine only ran in 1-shift operation, maximum 3 days a week Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) Gijdpfx Ajyffgrjfnon • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: good (used), Year of construction: 2017, NC steady rest for shaft machining Y-axis: -60/+80 mm Driven tools/C-axis for milling and drilling operations Tailstock BMT turret VDI 40 / 12 station Spindle bore: 106 mm Draw tube bore: 95 mm SIEMENS 840 D Diameter: 700 mm (27.56 in) Rotational speed: 2,500 rpm, 3,500 rpm (15,707.963 rad/min, 21,991.149 rad/min) Workpiece length: 1,300 mm (51 in) Max. turning diameter: 500 mm (20 in) Bar capacity: 95 mm (4 in) X-travel: 318 mm (13 in) Z-travel: 1,360 mm (54 in) Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Rated power: 33 kW, 42 kW (44.9 hp, 57.1 hp) Max. torque: 800 Nm, 1,040 Nm (590 ft.lb, 767 ft.lb) Gijdpsyizdhefx Afnon Coolant capacity: 350 l (92 gal) Overall length: 6,511 mm (256 in) Overall width: 2,249 mm (89 in) Overall height: 2,150 mm (85 in) Weight: 11,000 kg (24,251 lb)

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: SIEMENS, This 3-axis EMCO VT 400 vertical turning machine was manufactured in 2014. It offers robust construction and precision turning capabilities, ideal for various industrial applications. Consider the opportunity to buy this EMCO VT 400 vertical turning machine. Contact us for more information. Additional equipment • Number of tool holders: 12 • Tool holders according to DIN69880 VDI 40 • Number of driven stations: 12 Machine Benefits Technical Machine Benefits • Torque max. : 40 nm • Speed range: 0-4000 min-1 • Drive power max. : 8. 5 kw • Duty cycle at max. Power: 25% Giodex D Iraepfx Afnon

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 spindle tunring speed 15.000 U/min max. torque 190 Nm tool taper HSK 63 table surface area 600 x 600 mm table load capacity 350 kg feed 60.000 mm/min auto power on hours ca. 7.975 h NC program ON ca. 1.999 h spindle hours ca. 1.378 h weight of the machine ca. 9.800 kg Overall size ca. 5.000 x 4.500 x 3.110 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - External coolant system with 3 nozzles, 4 bar Gisdpfx Aoydqq Tsfnsn - Internal coolant system, 20 bar - Scraper belt chip conveyor Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel Gisdeu N Avxjpfx Afnjn accessories: a few test tables and plates (comparable with the pictures) *

Condition: used, Year of construction: 2003, control 840D-PCU 50 V1 3 coolant ja chip conveyor ja kW Giodpfx Afeqn A Rrjnjn generator - rated current 110 A connected load 56 kW

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Gedovvtpxopfx Afnsin Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *