Used Electrostatic Filters for sale (7,657)

Condition: used, RS Simulators Water-cooled temperature test chamber New generation rod program controller (SE-702 with touch panel and data logger for measurement recording) Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel (Pure RMS housing, NO shaker included!) The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a duct in the base plate of the RMS substructure. The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase (commonly found in electronics tests) Application) Hfedpfx Ahsv Rcbaj Hsp Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm Temperature range: -70°C to +180°C Current consumption: approx. 100 A Total power: approx. 50 kVA Cooling and heating capacity: 10 K/min Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!! Type: TS1000/70-10K For your safety, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment. Condition: Used Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,120 h, load capacity: 5,000 kg, lifting height: 6,310 mm, fuel type: diesel, mast type: triplex, construction height: 3,000 mm, drive type: Diesel, Diesel forklift Hodpfx Ahoxwqz Rj Hefp Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good 3rd valve, 4th valve, heating, soot filter, full cab,

Condition: good (used), mileage: 194,745 km, power: 265 kW (360.30 HP), fuel type: diesel, color: white, axle configuration: 6x2, tire size: 385/65R22.5, fuel: diesel, wheelbase: 4,800 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, differential lock, onboard computer, Technical information Engine capacity: 10.518 cc GVW: 19.120 kg Drivetrain Make of engine: MAN Axle configuration Front axle: Tyre size: 385/65R22.5; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70R22.5; Suspension: air suspension Rear axle 2: Tyre size: 315/70R22.5; Suspension: air suspension Interior Steering wheel placement: Left Condition Technical condition: good Visual appearance: good Identification Serial number: WMA18SZZ8GM685543 Other information Vehicle's outer dimensions: 10,15x2,54x4 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information Hfsdpfxjxuz Eue Ah Hop The BLG road cleaner is suitable for use in emergencies and for performing preventive maintenance on specific road surfaces where a standard sweeper is not powerful enough. In Europe, for example, many roads are covered with ZOAB or other types of open concrete surfaces. Due to the open structure of these surfaces, dirt accumulates in the cavities. Other cleaning methods, such as sweeping or brushing, only “push” this dirt deeper into the cavities. This results in a very slippery road surface, especially in changing weather conditions. Because our road surface cleaner sprays the dirt loose under high pressure using dirt cutters and sucks everything up with the powerful fan, the draining effect of the road surface is maintained. This also makes the vehicle very suitable for effectively cleaning up oil and other serious contaminants such as paint. The advantages of the BLG road cleaner 2.5 m wide suction nozzle with two suction hoses Very powerful fan with a capacity of 20,000 m3/hour Hydrostatic drive for optimum ease of use Autonomous thanks to the use of water recycling The suction nozzles can be tilted independently Equipped with a coarse debris filter Pump section equipped with sound insulation Equipped with brush-in system and HD system For very intensive road cleaning, we have developed a powerful road cleaner that cleans using high-pressure and vacuum technology. With a water supply of approx. 9 m³ and the use of water recycling, it offers a very high degree of autonomy. The combined clean and dirty water tank is made of 4 mm thick stainless steel. The dirty tank is emptied via the rear cover, which is also made of stainless steel and opens upwards by means of two cylinders. The BekkerLaGram road cleaner can be found on industrial sites, motorways, airports, factory sites and much more.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Hfodpfx Ajxwvfhoh Hep Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Preloaded precision roller guides in the X, Y, and Z axes with linear guides Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Condition: used, Year of construction: 2018, x-travel 3200 / 2630 mm y-travel 750 mm z-travel 695 / 800 mm Control Heidenhain TNC 640 swivelling range -98 bis 98 Grad rotary table dia. 750 mm total power requirement 29 kW weight of the machine ca. 16 t Hedelius traveling column machining center Tiltenta 7 Magnum with continuously swiveling main spindle, 5-axis CNC control Heidenhain TNC 640, 22.0 kW/117 Nm main spindle drive 50-12000 rpm, 50-fold tool magazine and NC rotary table integrated into the fixed machine table. Machine equipment: T7M-3200, operating mode 3 -Pressure booster pump 50 bar -Heidenhain TNC 640-T series -Spindle speed 12000 rpm/29.0 kW -Extended swivel range TNC/T -HR 510 handheld control unit -SK40/190 standby magazine -Cone cleaning station -900 l slant bed coolant system -25 bar internal coolant supply -Slant bed coolant system prefilter Hfjdpfjwfqqkex Ah Hjp -Electrostatic exhaust air filters T / 2x1300 -Compressed air nozzle on spindle head -Internal compressed air supply -Blow-off guns -Rinsing guns -Infrared receiver M&H 91.40 -3D infrared measuring probe M & H 25.50 -Toolsetter M&H 35.70 -Workspace partition T7 with slider Control on: 33163:56:22 Machine on: 24185:07:21 Program run: 16784:12:57 Spindle: 11751.13.08

Condition: used, Glasses Type: ACM 18 Machine control: SIEMENS PLC S7-1200 Safety controller: SICK Flexi Soft 1 media circuit (hydrocarbon) Feed pump: adjustable gear pump (24 V) Vacuum pump: diaphragm pump (230 V / 50 Hz) 1 liftable/pivoting membrane holder with 3 removable cascade rings for filter membranes with a diameter of 47 mm. System filter: 0.2 µm; length: 5 inches Return filter: 5.0 µm; Length: 5 inches System pressure: maximum 6 bar Maximum flow rate: 2.0 l/min Minimum flow rate: 0.250 l/min Maximum system temperature: 41°C Tank volume: approx. 12.8 liters Tank can be filled via a manual 3-way ball valve Recirculation and reuse of the rinsing medium Permissible ambient temperature: +15…+25°C Noise emissions are below 70 dB (A) Flow-cap top with 1 particle filter (separation efficiency: 99.995%; filter class: H14 HEPA filter according to EN 1822) Employee protection against splashing analysis fluid thanks to a sliding guard Collecting tray under the membrane holder Operation via 12" BASIC touch panel (optional COMFORT panel) Operation via glass keypad and stylus with the 12" option COMFORT touch panel 32 different test programs, each with 30 rinsing steps Functions: Spraying, rinsing, ultrasound Basin 750 x 600 x 500 (W x D x H) mm with a usable volume of approximately 5 l for ultrasound (with hemisphere Ø300) Hinged safety screen with three movable panels for manual access (protects employees from splashing analysis fluid) Quick coupling in the basin area for connecting various nozzles. A 2.5 mm diameter nozzle is included. Insertion opening for components: approx. 1100 x 2200 mm (W x H) Basket for ultrasonic application for components up to 3 kg Product support grid for components up to 15 kg Extraction methods: spraying, rinsing, internal rinsing (optional), ultrasound Medium: Cold cleaner A III Analysis membrane Ø 47 mm (up to 3 pieces) Blank value: < 150 µm (from at least SaS 2 or SaS 3) Power supply (machine): 230 VAC 10%, 50/60 Hz Hedpewaypfefx Ah Hefp Rated power: 500 W Rated current: 2 A Back-up fuse: 16 A (max.) Supply cable: at least 3 x 1.5 mm² Control voltage: 24 VDC3) External dimensions: H x W x D 1922 x 800 x 893 mm Weight: 324 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,318 h, load capacity: 4,500 kg, lifting height: 4,670 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Hfjdpfx Asxwqz Djh Hep Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heating, soot filter, full cab, air conditioning,

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details turning diameter 800 mm turning length 1500 mm control Siemens 840 D swing over bed 1000 mm swing diameter over slide rest 800 mm max. workpiece weight between centres 2000 kg main spindle speeds: 2000 U/min main drive 62 kW transmission ratio 4 milling spindle drive 37 kW milling spindle turning speed range: 25 - 10000 U/min total power requirement 82 kVA weight of the machine ca. 28 t dimensions of the machine ca. 8,2 x 5,3 x 3,6 m Additional information UniCen Series – for large complex components With the Monforts machine tools from the UniCen Series 1000 you can work with large, complex components up to 1500 mm diameter and 1000 mm swing diameter entirely, process capably and cost effectively in one set-up. Great flexibility results from the five interpolating axis. The B axis swivelling drill-mill head with a swivel range of 190º di rects the tools to the workpiece in almost every position and every angle. Additionally, the tool head can be loaded fully automatically by up to 90 tools from a separate chain magazine. Thus, even complex freeform surfaces with high sur face finish quality are possible. Advantages > Wear free Monforts Hydrostatic > Optimal vibration damping > Long-term accuracy > Long life and highest machining performance > Complex five axis machining via the B axis swivelling drill-mill head > Turning, drilling, milling and thread-cutting on one machine > Precision ball-screw with preloaded double nut Hfedpfjxwu Unsx Ah Hjp UniCen options > Tailstock or sub-spindle > Steady rest > Lower Slide Extensive partial overhaul since November 2023: - All ball screws including bearings overhauled: X1/X2/Y1/Z1/Z2 - All cylinders overhauled - All Siemens motors overhauled: main spindle, tailstock, magazine, tool 1+2, X/Z/Y/B/C/U/W - Siemens control panel replaced, control module and LT module repaired - Clamping elements/ATC renewed: Ortlieb collet, clamping package incl. pull rod - Tailstock quill renewed - All wipers replaced and covers reworked - Drive belts and safety windows renewed - Various cables renewed * CNC Control SIEMENS 840 D * Swivelling milling head at the top (B axis), interpolating, HSK-A 63 * Y axis * C axis * 8-station turret at the bottom, for driven tools * 60-station tool changer * NC-controlled tailstock, quill diameter 150 mm, max. quill stroke 180 mm * Hydrostatic longitudinal guide in the Z-axis * Coolant system with paper belt filter * Chip conveyor * Oil-cooler, make SCHIMPKE * Extraction system * Power chuck, make FORKARDT, diameter 500 mm

Condition: used, Year of construction: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm spindle taper SK40 turning speeds 50 - 12000 U/min Hfodpev S Irtsfx Ah Hsp no. of workpieces in the magazine 30 Stück table surface area 3900 x 750 mm rapid travel x/y/z 12/12/12 m/min total power requirement 29 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 7200 x 3500 x 3100 mm CNC traveling column machining center Hedelius Equipment: - Chip conveyor - 30-position tool changer - Heidenhain CNC control iTNC 530i - High-pressure belt filter system - IKZ 15 bar - SK40 mounts - Operating instructions The following repairs were carried out in 07/2022: - X-axis guide carriage - Various pneumatic hoses - Safety glass on loading doors - Various push buttons with indicator lights - Door safety switches - X-axis cover (slats) - IKZ filters (4 pieces) - Filter cabinet - Z+Y-axis toothed belts - Door scrapers with dampers - Hose for external cooling, spindle cooling, and spray guns (2 guns) - Set of coolant nozzles for external cooling - 2x falcon bars for the Y-axis - 1x set of door rollers with rail (6 meters) - 1x Klüber grease with cone reamer

Condition: excellent (used), Bitzer Here we offer you a refrigeration unit. Was built but never used Starting current (rotor blocked) 135/220 A Supply voltage 400/3/50 V/Ph/Hz max. operating current 53 A max. power consumption 30.1 kW delivery volume: 101.10 m³/h (HD) 50,50 m³/h (MD) Motor (nominal): 30 HP 22 kW Oil filling BSE32 Option: BSE55 at R134a, tc > 70°C Oil quantity 4,75 l Refrigerant R452A Reverse osmosis filter and humidification system included Reverse oasmosis data: Permalefficiency 10 l/h Hodpfxehwmtvo Ah Hefp Feed water requirement 40 l/h Operating pressure 14 bar Dimension: 500*600*295 mm H*W*D Type: BS6 S6F-30.2Y-40P + Bitzer condenser water cooled K573H + RO20 Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,277 h, load capacity: 5,000 kg, lifting height: 5,060 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Hedsxcz Ixjpfx Ah Hsfp Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good 3rd valve, 4th valve, heater, soot filter, full cabin,

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Hfsdpexwu S Hofx Ah Hop Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, Year of construction: 2001, travel -x axis 1800 mm travel -y axis 520 mm travel -z axis 520 mm tool taper SK 40 Hfedpovh R Txefx Ah Hep table load 3 t tool piece magazine with 30 Plätze spindle drive 22 kW max. torque on the spindle 220 Nm *Machine in very good condition* + Loading door windows have been replaced + Linear guide carriages on X and Y axes have been replaced - Heidenhain iTNC 426-M control system - Partition wall for pendulum operation - Chip conveyor - Filter system - Spindle up to 8000 rpm - Rapid traverse x/y/z: 30/30/30 m/min - Year of manufacture 2001 Control on: 93212:52:14 Machine on: 82284:39:36 Program run: 42385:36:11

Condition: excellent (used), Here we offer you a be weathering tester. Atlas Xenotest Alpha LM a universal weathering instrument for testing the fastness to light and weather resistance of materials under normal, high-temperature and high-performance conditions. XENOCHROME filter XENOSENSIV gear Control the lamp power in W / m ² Sample room temperature controlled up to 70 degrees Electronics at sample level XENOSENSIV E(300-400 nm) and SST Stationary samples temperature and relative humidity sensor Humidification Irrigation Water supply with an integrated water tank Electronic version: 230V, 50/60 Hz Absorption filter 7 IR: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Window glass 10 FG: tracking 40-110 W / M ² turn running 21 - 57 W / m ² Absorption filter 4 IR + 3 window glass: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Absorption filter 6 IR + 1 UV: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Rel. electrical power without XENOSENSIV sensor: continuously adjusted to the set value 53-120% Samples ambient temperature:-20-70 ° (depending on selected filters configuration) Black standard temperature: Tracking 25-130 ° C turning barrel 25-100 ° C Relative humidity: 10% - 95% Fan RPM: 500-2500 RPM Dimensions: 900 x 780 x 1800 mm Type: Xenotest Alpha LM high energy Condition: pre-owned / used Scope of delivery: (See image) The unit comes out of an operation. We may more questions like on the phone for you answered Hfodpfx Ahod Dtn Ue Hsp

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 2500 mm y-travel 1600 mm z-travel 1200 mm Control Heidenhain iTNC 530 Table dimensions 2860 x 1200 mm tool taper ISO 50 spindle turning speed range 20 - 3000 U/min max. torque on the spindle 700 Nm feed range 2 - 10000 mm/min rapid traverse 25 m/min spindle motor 32 kW table load 7500 kg weight of the machine ca. 25,0 t Additional information Working hours (dated April 2025): - Machine on: 34.320 h - Control on: 23.218 h - Auto. cycle: 11.987 h * CNC control HEIDENHAIN iTNC 530 * Electronic handwheel * Automatic universal milling head (overhauled in 2018), 2.5 / 2.5 deg. indexing * Coolant device with paper band filter * Cooling through the spindle * Chip conveyor * NC rotary table YRT F 1000/1250 (4th axis): - Diameter 1250 mm - Max. load 3500 kg - Overall height 265 mm - Table top thickness 125 mm - Partial accuracy +/- 2.5" Hedpfx Ahsxwuxge Hjfp - Weight of the table 1270 kg

Condition: new, Ringler Ringler RI 331 industrial vacuum with shaking motor Article number: 99863980002351 Condition: New / new – originally packed (original packaging) Description: You are bidding here on a new Ringler industrial vacuum RI 331 with integrated shaking motor for filter cleaning. The device is in its original packaging, unused, and in as-new condition. Ideally suited for demanding industrial applications. Hjdpjd H Ampofx Ah Hjfp Technical details: Model: Ringler RI 331 Drive unit: Type D3 – soundproofed & splashproof Suction turbine: Direct drive, 3 kW Filter: Integrated surface filter with automatic cleaning Housing color: RAL 9002 (gray-white) Article number: 99863980002351 Advantages at a glance: Robust industrial vacuum technology from Ringler (Kärcher Group) Effective filter cleaning by integrated shaking motor Quiet & durable operation Ideal for workshops, production & industrial environments Condition: new Scope of delivery: (see picture) (Changes and errors in the technical data, information subject to change!) We will be happy to answer further questions by phone for you.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Hfedpfx Ajxwuu Ijh Hop Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), Here we offer you a TOX press-in machine TOX-C-frame press. TOX Pressotechnik Press-in machine TOX-C-frame press Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type EMB 030.068.Α.001 Hfsdpshhil Tsfx Ah Hjp Drive KWE3O.0O.17O.10H Pneumatic connection G3/4'' Compressed air preparation filtered and dried compressed air max. particle size 40 µm Air pressure working process Pmin. = 3,0 bar Рmах. = 6,0 bar Pressing force 170 kN Total stroke / scraper stroke 170 mm/ 10 mm Control STE 326-366-3/4"-90-230٧/АС special cpl. Electrical connection 90-230V/AC Ambient temperature operation Тmiп. = 10°C Tmax. = 60°C Tox press-in monitoring EPW 500FP Force / displacement measurement Holding-up device ZHE for Tox press Insertion dimensions: Width 1917.5 mm Height 2506 mm Depth 1917.5 mm Protective grid circuit Leuze B20/B21 Light curtain Press-in tool see (pictures 15 to 18) Press-in sleeve (Fig. 17) 24.5 ∅ mm Range of application, use Press-fit Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Features: Type Climate Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Pressure 80-100 PSI (552-689 kPa) Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Hfedeucd Rbjpfx Ah Hjp Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), pure engineering Type: pureGMC18 System for manual weighing processes Climatic chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specially designed for the gravimetric determination of particulate emissions in exhaust gas analysis and fulfills the normative requirements of the environmental authorities. All necessary climate control components are integrated. In combination with the HEPA filter, a contamination-free and precisely and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-decoupled granite for low-vibration installation of an ultra-microbalance Ionization device against static charge Hodpjlddmzsfx Ah Hefp Flow protection for shielding the load cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with sockets, earthing bolt Advantages: Meets normative requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45%r.H ± 3% Dimensions W/D/H 1,800/800/1,980 mm Clean room class 5 (ISO14644-1) Power supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a LEYBOLD Trivac Ölgedichtete vacuum pump. LEYBOLD Trivac Ölgedichtete vacuum pump with exhaust filter LEYBOLD TRIVAC D 25 B Ölgedichtete vacuum pump 2.5 x 10⁻ ³ mbar Pumping speed (50 Hz): 25.7 m ³/h Pumping speed (60 Hz): 30.8 m ³/h Exhaust filter with oil recirculation ARS 16-25 Type: D 25 B Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) Hsdpfx Ahjd Hpv Ss Hjfp We can answer questions on the phone for you.

Condition: excellent (used), We offer here a Beko adsorption air dryer. BEKO activated carbon adsorber CLEARPOINT 2X times DRYPOINT dust filterS075RFWMX Kondensomat Bekomat 20 FM KA20K1ZAR BEKO activated carbon adsorber CLEARPOINT 2X Type: Beko adsorption dryer Condition: used / used Hfedpfx Ahonyh Tys Hep Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Ringler Ringler RI 331 industrial vacuum cleaner with shaking motor Hedpfx Aod H Amteh Hefp Article number: 99863980002352 Description: Here we offer a new Ringler industrial vacuum cleaner RI 331 with integrated shaking motor – in original packaging condition (OVP). Ideal for professional industrial use, workshops, or demanding production environments. Technical data: Manufacturer: Ringler (Kärcher Group) Model: RI 331 Drive unit: D3 – soundproofed & splashproof Power: 3 kW direct-driven suction turbine Filter: Integrated surface filter with automatic cleaning Color: RAL 9002 (grey-white) Article number: 99863980002352 Special features: Ready to use immediately after delivery Robust design for continuous use Ideal for industry, trades, workshops Made in Germany Condition: new Scope of delivery: (See image) (Changes and errors in technical data, information reserved!) We are happy to answer further questions for you by phone.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens Hjdpfxsd Nfq Ij Ah Hjfp + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: as good as new (ex-display), Miyachi Unitek Miyachi Unitek UNFD4/240 Resistance Welding Machine + BOFA V200 Fume Extraction Unit Description: For sale is a precise resistance welding machine Miyachi Unitek UNFD4/240 together with a BOFA V200 fume extraction unit – perfect for workshops, laboratories, or production sites. Miyachi Unitek UNFD4/240 – Resistance Welding Machine Manufacturer: Miyachi Unitek Model: UNFD4/240 (1-298-01-01) Input: 220 V / 50-60 Hz, max. 15 A Output: max. 3.81 V (Tap 1) Power: 4 kVA Heating time: 0–99.9 s adjustable → precise welding Protection rating: IP20 (indoor use only) Weight: 27 kg Standard: GB15578-2008 Hodpfx Ahexvx D Rs Hefp Ideal for precision welding of electronics, batteries, or small metal parts BOFA V200 – Fume and Smoke Extractor Model: V200 Voltage: 230 V / 50-60 Hz Current draw: 0.45 A Fuse: 1 A Compact, quiet operation Equipped with HEPA and activated carbon filters Ideal for laser, soldering, or welding workstations Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications and details are subject to change and errors!) If you have further questions, feel free to contact us by phone.