Used Electrostatic Filters for sale (6,811)

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Dsdexf Up Ijpfx Ag Dskk

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Dodjrunu Ispfx Ag Dskk

Condition: good (used), Fan filter, fan array, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3325107 -Fan: 230 V 41 W -Number: 1x fan included Djdsyu Umyopfx Ag Dokk -Dimensions: 255/255/H122 mm -Weight: 1.5 kg

Condition: good (used), PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter, ferrite adapter, ferrite filter -Manufacturer: Reis Robotics, Ferrite Adapter Filter, Ferrite Filter -Type: unfortunately without a type designation -Number: 3 filters available Dsdpfoyu H Nysx Ag Djkk -Price: per piece -Dimensions: 150/140/H80 mm -Weight: 0.7 kg/pc.

Condition: used, System Membrane Filter Press / Chamber Filter Press, used Type: Andritz 800 Membrane Mix Application range: Sludge dewatering, sludge treatment Year of manufacture: 2008 Filter plate size: 800x800 Number of plates: 24 membrane plates, 24 chamber filter plates, 1 head and 1 end plate Filter plates: PP Dkedpfxewqygfj Ag Dsk Cake thickness: 30 mm Filter cloths: optionally available, tailored to the medium Press volume: approx. 1000 dm3 Filtration pressure: approx. 15 bar Plate closing: electrohydraulic Control cabinet: optional Purchase or rental: Inspection of the systems possible by appointment at our facility.

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 145 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Dedpfx Aofbbqhog Djkk

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Storage location: Nattheim Dksdpfxevxk Ane Ag Djk

Condition: excellent (used), Year of construction: 2017, Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Condition: The system is unused -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available -Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm Dedpfx Agjytgrxs Dekk -Weight: 1120 kg

Year of construction: 1995, condition: used, machine/vehicle number: 4141, Emulsion maintenance trolley FA-300/U Blotenberg, filter unit -WT 114- Dsdpfslf D Ugox Ag Dokk Offered here is an emulsion care trolley/emulsion filter of the company Blotenberg. Technical data: Manufacturer: Blotenberg Saugsysteme Type: FA-300/U Motor power: 0,25kW/ 220V / 3,1A Year of manufacture: 1995 Flow rate: 300l/h Serial number: 4141 dimensions: 1000 x 900 x 450mm Suitable for: Emulsion Coolant Cleaning solution Wet cutting machine tools Parts washers Mode of operation according to the manufacturer: The emulsion maintenance cart continuously draws in the contaminated emulsion mixture, separates the substances and returns the cleaned emulsion to the machine. All this is done purely physically - no spinning or centrifuging.

Condition: good (used), Camfil Filter Unit CS 610 for Industrial Extraction Systems Dedpfx Agsyrnfwo Dekk Manufacturer: Camfil KG Model: CS 610 painted Type: Filter unit for industrial extraction systems Article number: 518110 Serial number: 000442739182 Quantity: 2

Year of construction: 2018, condition: good (used), Herding MULTICOATER MCI 55/1 dosing unit Manufacturer: Herding GmbH Filtertechnik Model: MULTICOATER MCI 55/1 Year of manufacture: 2018 Type: Dosing unit for filter coating Supply voltage: 24 DC V Weight: 70 kg Weight: 130 kg Machine ID: 28696 Dkjdpfx Aoyrnd Tsg Djk Machine ID: 28697 CE marking: available Quantity: 2

Year of construction: 2012, condition: good (used), Offered from a bankruptcy is a ready extraction and filter unit by ULT Model ACD VF 1000 Year 2012 230 Volt Dksdpfx Asducl Nsg Dok Suction connection 150 mm Extraction unit 200 mm Dimensions in mm approx. 1250 x 680 x 800 Weight 125kg Nominal power 1000 m³/h The Absauganalge is suitable for vacuuming and filtering of vapours and odours. Chemical gases and vapors dry, non-explosive She can be used with folding arms directly as machine extraction and extraction.

Condition: used, Year of construction: 2001, liter capacity . l feed pressure . bar Dkjdpeyuy Tlefx Ag Dek coolant capacity . l

Condition: good (used), Fan filter, fan array, air cooler, control cabinet fan, filter fan -Rittal: SK 3241.100 filter fan -Filter: 230 V/40 W -Price: per piece -Quantity: 8 pieces -Dimensions: 255/255/H120 mm Dksdpfoff U N Njx Ag Dok -Weight: 1.7 kg/piece

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Dkedpfxor R Ewlo Ag Dek Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: good (used), fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3152 Dkodeuuu Ivspfx Ag Djk -Fan: 230 V 37 W -Dimensions: 260/260/H1460 mm -Weight: 1.9 kg

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Dksdpfxox T Ah Do Ag Dek Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: good (used), Welding fume filter, welding fume extraction, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, filter system, filter block Dksdpfxspm Th Eo Ag Dek -Manufacturer: Fischer Umwelttechnik, filter block exhaust air purification system type 4600 -Rated power: 2.2 kW -Individual components: see photos -Dimensions: 910/750/H2250 mm -Total weight: 226 kg

Condition: new, functionality: fully functional, The filter cells (large), model ELBAZ0124L, by ISI Industrieprodukte for ISI / Elbaron electrostatic oil mist filters. 2 pieces, new and unused. For example, suitable for filtration in air technology installations and devices such as air conditioning systems, compressors, and paint spraying systems. Time-saving replacement option / temperature resistant up to max. 80°C. Suitable for, for example, ISI / Elbaron RH 2500 DV, RON4D1TR electrostatic filters. Dkodpfeylk Arjx Ag Dsk Price per piece: €990 net, ex stock, plus packaging costs. All technical information subject to errors and typographical mistakes. We sell exclusively to countries within the European Union.

Condition: good (used), Year of construction: 1997, Bargain price as the unit must be removed by the end of March. Large stationary filter system with a footprint of 4 x 2 m, divisible for transport. Total height is 6.54 m. Filter area of 300 m², 200 filter bags each 3 m in length. With scraper bottom discharge. With rotary valve. With return air duct. Additional equipment available. Price is for the undismantled unit ex location, but dismantling can be arranged at extra cost. Dsdpfxeyun Ece Ag Djkk

Condition: good (used), Filter hose chip extraction, dust bag, filter, filter bag for chip extraction, dust extraction, extraction system, ventilation ducts and fittings, exhaust hose, extraction hose -Ventilation hose: Exhaust hose with flange -Flange: Ø outside 290 mm, slightly curved -Length: 3500 mm -Number: 20 hoses available -Price: per piece -Weight: 1.6 kg/piece Dkedpfx Aepyk Nfog Dsk

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Dkodpfx Agsyvuvle Djk

Condition: good (used), Year of construction: 1991, material Stahl weight 300 kg turning speeds 1400 U/min motor 75 kW The Höcker Polytechnik L 300 industrial blower, built in 1991, impresses with its robust construction and an impressive air flow rate of 7,200 m³/h. With a 7.5 kW motor and a speed of 1,400 rpm, it is ideal for extraction and conveying tasks in workshops, production facilities, and filter systems. Dksdpfxeynmp Hj Ag Dek The fan runs reliably, is designed for durability, and comes from a renowned German manufacturer. Perfect for anyone looking for a solid and powerful solution for air and material transport.

Condition: used, Imeca - ELIT ES8 pressure filter- Rotating trays - 8 m² trays Djdoyga Uyspfx Ag Dokk

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition Djdjhalvdspfx Ag Dskk