Used Electroplating Bath for sale (444)

Condition: excellent (used), functionality: fully functional, 1 x Blendtech single shaft ribbon blender rice cooking system with side scrape. On weigh cells. Front end discharge. Dimensions of vessel approx. 900 mm wide x 900 mm deep. Crsdpfsvxg Awex Ahbsc

Condition: excellent (used), kay engineering 600 litre jacketed cooking vessel with side wall scrape and emulsifier. On weigh cells. All S/s. Was previously doing soups with particles and smooth soups without particles. Csdpfxou Aud Io Ahbjrc

Condition: excellent (used), functionality: fully functional, tank capacity: 300 l, total length: 1,200 mm, total width: 1,200 mm, total height: 1,100 mm, 5 x Nilma Brat Pans. Direct gas cooker. Tilting Crsdpfxjvy E Dvo Ahboc

Condition: excellent (used), Complete Deighton 200mm wide battering, breading and frying line. With wire belt infeed, Preduster, batter applicator wire type and breading machine with electric fryer. Capable of flash frying 180/200kg of product a hour Crsdpfx Ahsu Uuawsbsc

Condition: excellent (used), Year of construction: 2017, Stephan micro cut model MCH20FS with a ceia metal detector Credpfxoufylaj Ahbsc

Condition: excellent (used), Glass cooking wok 300 litre and side wall scrape. With thermial oil boiler. Tilts both sides. Codeumb Hiopfx Ahbjrc

Condition: excellent (used), Year of construction: 2020, Complete filleting line. Includes a Baader IS-026 heading machine with take off conveyor. Into BADDER 588 filleting line Working range (approx.) Cod: 400–2,500 g / 35–70 cm Haddock: 400–2,300 g / 35–65 cm Saithe: 400–2,000 g / 35–62 cm Hake: 160–800 g / 20–47 cm Alaska Pollack (h+g): 150–450 g Throuput Up to 35 fish/ to 40 fish/min. With trimming / packing conveyors. Cjdpfx Aju Dahbjhborc Video is available of the complete line running on request

Condition: excellent (used), functionality: fully functional, Rondo comas HD 3000 pastry sheeter Cjdpfx Aet Twp Hohbsrc

Condition: excellent (used), Robert riser roto claw its just had brand new electrics. Handles blocks up to 9.5’’ thick and 21’’ wide. Blocks can be stacked using the built in air operated loader to achieve higher production. Crjdpfxsur Nguo Ahbsc

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 550 kg, total length: 1,737 mm, total width: 861 mm, total height: 735 mm, volume flow: 756 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 960 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Codpfx Aoftzuwshbjrc Nominal flow: 630 m3 / h at 50Hz. Final vacuum: 0.1 mbar abs. Any doubts, do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 218 kg, total length: 962 mm, total width: 563 mm, total height: 420 mm, volume flow: 360 m³/h, power: 75 kW (101.97 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,720 rpm, warranty duration: 12 months, protection type (IP code): IP55, rotational speed (min.): 1,420 rpm, Rotary vane vacuum pump in oil bath. Available in stock. Completely new. 12 months warranty. Model: Marpa Vacuum MV 0300E Nominal flow: 300 m3 / h at 50Hz. End vacuum: 0,1 mbar abs. Crsdpfx Aoftzv Uehbjc Motor power: 7,5 Kw Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 85 kg, total length: 735 mm, total width: 420 mm, total height: 295 mm, volume flow: 120 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath for work with MAP atmosfere ( hig % of O2) Available in stock. Completely new with 12 months warranty Nominal flow: 100 m3 / h at 50Hz. Crsdpfx Aefk Sizehbjc End vacuum: 0.5 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 218 kg, total length: 1,010 mm, total width: 560 mm, total height: 440 mm, volume flow: 360 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath. Available in stock. Completely new. 12 months warranty. Model: Marpa Vacuum MV 0300N Cjdpfoftzr Uox Ahbsrc Nominal flow: 300 m3 / h at 50Hz. Final vacuum: 0,1 mbar abs. Motor power: 7,5 Kw Any clarification, do not hesitate to contact us.

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump Cjdpfx Ahslb I Dajbjrc - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 67 kg, total length: 661 mm, total width: 421 mm, total height: 297 mm, volume flow: 76 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath. Available in stock. Completely new. With 12 months warranty. Nominal flow: 63 m3 / h at 50Hz. Final vacuum: 0.1 mbar abs. Crjdpfx Aofk Si Nohbsc Any clarification contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 85 kg, total length: 735 mm, total width: 420 mm, total height: 295 mm, volume flow: 120 m³/h, input frequency: 50 Hz, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 100 m3 / h at 50Hz. Crodpfx Ahjftzf Eobsc Final vacuum: 0.1 mbar abs. Any doubts, do not hositate to contact us.

Condition: excellent (used), Year of construction: 2002, Consisting of: Codpjy H H U Iefx Ahborc - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: used, This listing is for the Barkey Plasmatherm Laboratory plasma thawer The units are in full working condition and are ready for immediate use These items show very little signs of use Available in original packaging with manuals The Barkey Plasmatherm is a specialised laboratory and clinical device designed for the safe thawing and warming of fresh frozen plasma (FFP), blood components, and other infusion products. The system uses controlled dry-heating technology to ensure uniform and gentle thawing while maintaining the integrity of sensitive biological samples. Unlike traditional water baths, the Plasmatherm operates using a sealed temperature-controlled system that prevents direct contact between samples and water. This improves hygiene, reduces contamination risk, and simplifies maintenance. The device maintains precise temperatures typically between 37°C and 45°C, ensuring optimal conditions for plasma thawing and blood warming procedures. Safety is a key feature of the system, incorporating over-temperature protection, leak detection sensors, and visual and acoustic alarms to alert operators to any irregularities. A transparent lid allows continuous monitoring of the thawing process while the intuitive control interface enables easy operation and accurate programming of temperature and time settings. Cedpjyufrgofx Ahbsrc The Plasmatherm is widely used in hospital blood banks, transfusion services, and clinical laboratories where rapid, reliable, and hygienic thawing of plasma and blood products is essential. Its efficient design helps laboratories improve workflow while maintaining strict compliance with transfusion and laboratory safety standards.

Condition: excellent (used), JD Manufacturing 2 x batch fryers with distribution system. with non stick stirring to prevent clusters. all s/s. Cjdpfx Aoymr Skshberc

Condition: excellent (used), functionality: fully functional, Starlinger Extruder Cedpshgq Ahofx Ahbjrc - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Commissioning and testing available upon request. In stock

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Crodsg U Uv Uopfx Ahbec Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: new, Year of construction: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Included accessories: - 20-piece set of packing plates - RTE 165 rotary table - SPW 12 58-piece clamping tool assortment - 4x SE55 leveling feet with vibration dampers - MK4/M16 ER32 3-20 mm collet chuck set Heavy, robust cast construction High smoothness due to ground gears running in an oil bath Forward and reverse operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed for the X-axis Coolant system Machine lamp Gear head swivels ± 45° Massive dovetail guide of the column, hand-scraped, for maximum stability and precision Height-adjustable, large protective screen with microswitch Drill depth stop Digital position display DRO 5 Drilling / tapping function Heavy-duty, large cross table, precisely machined surface with T-slots and adjustable gib strips Solid cast machine base with chip tray Single-speed quality industrial motor Crsdpfx Asyxyivshbsc Wide speed range from 60 - 2,760 rpm via 2 infinitely variable speed ranges SIEMENS SINAMICS V20 frequency inverter Dimensions and weights: Length approx. 1,600 mm Width/Depth approx. 930 mm Height approx. 2,110 mm Weight approx. 495 kg Drilling-Milling Head: Drilling-milling head tilt range ± 45° Drilling-Milling Capacity: Maximum face mill size: 63 mm Maximum end mill size: 26 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Horizontal Milling Table: Length: 800 mm Width: 240 mm Distance vertical spindle to milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Coolant System: Coolant pump(s) drive rating: 100 W Standards and Approvals: Standard: DIN EN 55011 EMC class: C2 Travel Range: X-axis manual: 560 mm Y-axis manual: 195 mm Z-axis manual: 350 mm X-axis automatic: 480 mm Vertical Spindle: Throat: 258 mm Spindle taper: MK 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M16 Quill diameter: 75 mm Quill travel: 120 mm

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm z 220 mm Crodpfom Uyuxsx Ahbec Wear-free tubular direct drive Water bath incl. cooler Automatic wire threading

Condition: used, functionality: fully functional, machine/vehicle number: 570150, Year of construction: 2015, operating hours: 10,018 h, Stratasys Objet Connex 500 3D Printer (Purchased April 2015) A complete set of instruction manuals and safety data sheets for printing and cleaning materials is included. Spare Components: Credoy S Rp Hjpfx Ahbsc 2 x polyjet print head spares (new) 2 x thermistors (bagged) 1 x new bulb 1 x used bulb (left) – 3610 hours of use 1 x used bulb (right) – 4539 hours of use 2 x Assy Wiper Leaf (used) 2 x Roller Bath Blades Kit, Filter & Accessories – several items bagged together 1 x Eden MCB – in good condition 4 x Support Cleaning Fluid (1 x OBJ-03216, 3 x OBJ-03214, all expire in February 2026) The unit was decommissioned by the authorized service contract team in July 2023 and no longer has a current service contract.

Condition: used, Year of construction: 2009, functionality: fully functional, total height: 3,500 mm, total width: 2,000 mm, total length: 4,000 mm, type of input current: three-phase, input voltage: 400 V, pressure: 1 bar, operating pressure: 1 bar, overpressure (max.): 1 bar, water tank capacity: 350 l, tank capacity: 200 l, Equipment: documentation/manual, We are offering this used KOTHE K800N water bath distillery for spirits, manufactured in 2009. Reference number: 0036 Serial number: 1862 Year of manufacture: 2009 Still volume: 200 L Pressure chamber volume: 230 L Maximum pressure (PS): 1.0 bar Test pressure (PT): 1.5 bar For sale is a high-quality water bath distillery from Kothe, featuring customs lock, distillery control, and alcohol meter. Equipment: - Designed as a show distillery - 200 L water bath still - Electrically heated, 4 x 12 kW heating elements - Fitted with a whisky helmet - Side-mounted rectification column with 3 plates and dephlegmator - 100 L cooling water tank - Agitator - High-pressure cleaning - eLogik Red distillery control - Desticounter alcohol meter Credpfx Ahsy Itlcsboc Year of manufacture (still): 2009 Year of manufacture (alcohol meter and distillery control): 2024 All equipment in excellent condition. Original price: €74,400 (net) If you have any questions or require further information, please feel free to send us a message or give us a call.