Used Electroplating Bath for sale (412)

Condition: excellent (used), KronenDouble pass flume system 1 x All s/s Kronen flume washer model GEWA 3800V with vibration outfeed. Overall length approx. 3.4 m 1 x Kronen flume washer type IA-T 2600/3800. Water wheel type system with vibration table. Overall dimensions approx. 4.2 m long. Can sell separately or as a system. Ncedox Tf Nqepfx Ad Een

Condition: new, * IMMEDIATE AVAILABILITY * Including lowering platform / manual hydraulics / braked Technical Specifications: • Type: New vehicle • TÜV: New / 2 years • Availability: IMMEDIATE! • Permissible gross weight: 3,500kg • Unladen weight: approx. 695 kg • Payload: approx. 2,805 kg • Internal dimensions: 345 x 162 x 35 cm (L x W x H) • Overall external dimensions: 500 x 228 x 70 cm (L x W x H) • Loading edge height: approx. 48 cm • Tyres: 195/50R13C steel rims • Brakes: yes • Jockey wheel: yes, 45mm with clamp • 100km/h package: available for an extra charge • Including vehicle papers Superstructure: • Floor: multiplex wood floor • Side walls: anodized aluminium, three sides • Side wall height: 10 cm + 25 cm • Chassis: low-loader, lowering type, ALKO rubber suspension axle • Tipping function: lowerable • Hydraulics: manual pump • Loading ramp angle: approx. 6° • Wheel chocks: not included • Overrun device & brake: ALKO • Frame/chassis: fully welded and hot-dip galvanized steel frame • Lashing rings: 10 pcs, recessed on the sides • Winch: available for an extra charge • Supports: rear support • Ramps: with drive-over tip at the rear • Lighting plug: 13-pin • Approval: COC papers Standard Equipment: • Extremely robust multiplex wood floor • Fixed side walls 10mm • Insert options at all corners, e.g. for tarpaulin frame • Very stable welded steel frame • Complete frame hot-dip galvanized in dip bath • Numerous strong cross members, allowing high point load capacity • Hydraulic lowering loading area • Mechanical safety lock for pivot axle during operation • Rear drive-over tip • Additional continuous longitudinal beams welded in Nsdjyivaqjpfx Ad Escn • Front storage box • 10 lashing rings within loading platform • Swivel number plate holder at the rear for easier loading • ALKO overrun device and parking brake • ALKO coupling head • Reinforced, highly stable V-drawbar • Reverse automatic brake • 13-pin plug • Reversing lights • Large dimensioned safety lighting • Integrated rear fog light • Recessed lighting in rear frame • Center jockey wheel with clamp • Approval documents: COC papers Special equipment included in the price: • Aluminum extension side walls (25 cm) unmounted, supplied as a set for self-assembly • Including locking fasteners for extension side walls • Removable rear side wall Optional accessories retrofittable – please enquire: • 100km/h approval with shock absorbers • Anti-theft device • Spare wheel • High tarpaulin • Additional lashing rings • Reversing lights • Lashing straps • And much more. New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document dispatch possible in advance or provision of temporary registration plates (Germany). - Export plates incl. customs declaration possible Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers immediately available from us! For over 30 years your specialist dealer & service partner for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, mistakes and prior sale excepted -

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Nedpfx Adou Rda Io Eocn Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: like new (used), Fortress Stealth metal detector with star flex checkwigher. Aperture 400 x 110mm. fully rebuilt. Twin push arm rejects into lockable bins. Video on request. very tidy machine. Nodpfxjx Syn Ee Ad Eecn

Condition: excellent (used), VC999 K6 Usable chamber size: 920 x 480 x 214 mm. Welding strip lengths: 920 mm / 480 mm Njdpfxox Syl Ds Ad Eocn

Condition: excellent (used), Talsa bowl cutter all S/S model K30. Knife Speed Variable between 500-3500rpm. 30 litre bowl. 3 knife assembly. with guard. Nsdpfxsx Sykgj Ad Ejcn

Condition: used, Year of construction: 2014, operating hours: 45,000 h, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Nodpfx Adjyftr Ao Ejcn

Condition: excellent (used), Risco TR130 fresh meat grinder. This grinder has a 200-litre bowl capacity and a 130-mm output grinding plate size. All s/s. Nodpfjx Sqwqex Ad Eecn

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 – 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment time: 11.65 minutes Bottle formats: Up to Euro-NRW Bottle rows per carrier: 14 Bottles inside machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot lye 8.96 seconds Lye II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Utilities Water consumption: 3.25 – 3.38 m³/h at 60°C Power connection: 12.0 – 12.9 kW Thermal energy consumption: 3,528 × 1000 kJ/h Dimensions Length with cabinet: 7,020 mm Width of frame: 1725 mm Height: 2300 mm Ncsdpfx Asxn A S Ned Eon

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Ncjdpfx Adevrfivj Een

Condition: used, Year of construction: 2010, Overview  This rotary cold-glue labelling machine was manufactured in 2010 by the Spanish company Auxiemba. The model BASIC 600-10-CF-I-DR is designed for applying paper or polypropylene labels onto cylindrical glass bottles using cold-glue technology. It is equipped with formats for 330 ml, 500 ml, and 750 ml bottles, making it suitable for wineries, breweries, and beverage producers. The machine is being sold due to the closure of a production line and is available in very good working condition. Technical data  Capacity: up to 10,000 bottles/hour Bottle formats: 330 ml, 500 ml, 750 ml Bottle height range: 50–360 mm Bottle diameter range: 40–160 mm Label length range: 30–140 mm Rotation direction: Clockwise Number of bottle plates: 10 Number of labelling stations: 1 Air consumption: 125 L/min Power consumption: 17.3 kVA, 400 V Working height: 1,100 ± 50 mm Construction: Stainless steel frame, enclosed safety housing Control system: Micro PLC with touch-screen for speed, production, and fault management Key features: Cold-glue labelling head with oil-bath lubricated mechanisms Central carousel with centering bases for precise bottle positioning Pneumatic heated pump for adhesive circulation and return system Automatic bottle synchronization with infeed screw to prevent breakages Micrometric glue adjustment to reduce film thickness and ensure clean labelling Bottle retainers for smooth handling and reduced congestion Gear-driven transmission with clutch and emergency stop system Compact, fully enclosed design for hygiene and safety   Nsdpsxl Di Dofx Ad Escn

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Ncsdpfx Adowg E D Is Een

Condition: used, Year of construction: 2011, Overview  This complete filling line was designed for NRW and Euro bottles as well as crates and pallets and offers an output of up to 7,500 bottles per hour. The machines are from different years of construction between 1992 and 2022 and have few operating hours. The line is still in operation until the end of May and can be viewed in person. Technical details Output: Up to 7,500 bottles/hour Bottle formats processed: 0.33L & 0.5L (NRW, Euro, Ale) Crate formats processed: NRW and Euro crates Scope of delivery Palletizer | Flema | Star C-LC | 1996 (500 crates/h) Unpacker | RICO | UNO 1-head 124 | 2010 (350 crates/h) Decapper/decapper | ADELSKI | PPE 2005 | 1995 (2,000-12,500 bph, 8,500 operating hours) Bottle washer | PAC | CB 14-0.5l-R-7 LII Compact | 1998 (7,500 bph, 14,175 operating hours) Bottle inspector | SYSCONA | LC 10 FD | 2007 (caustic control & metal detection) Filler | ICS | multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 | 2011 (6,000 bph, 7,200 operating hours) Labeling machine | ANKER | Roland 8/3 | 1998 (7,000 bottles/hour, 14,500 operating hours) Inkjet printer | Keyence | MK-G1000 | 2022 (currently set up for dating on the ANKER Roland 8/3 labeler) Packer | RICO | UNO 1-head L-machine | 2012 (300 crates/h) Premixer | Jakü | PM-E-30-2k | 1992 (35 hl/h, deaeration & carbonation) Crate washer | RICO | 2500 1-bath | 2012 (600 crates/h) Nedov Icubopfx Ad Escn

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Nodpfx Adjvptt Rj Escn

Condition: used, Year of construction: 1997, Overview This crate washer was manufactured in 1997 by the German company Klann. The 1800 N model is a single-bath crate washing system designed for cleaning beverage crates of various sizes at a capacity of up to 2000 crates per hour. It is still installed and immediately available. Technical data  Capacity: 2000 crates/hour (for GDB crates, lengthwise) Crate formats: 12 × 0.7 L crates (lengthwise) Baths: 1 Construction: Stainless steel Length (total): 4,640 mm Width: 1,300 mm Electrical connection: 16 kW Vapor extraction Ncodpfx Aoxrg H Sed Een

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Njdpfjl Hx Adox Ad Eecn

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Ncsdpfx Ajt Ul Exed Ejn

Condition: used, Year of construction: 2012, Overview  This complete filling line for returnable glass bottles was manufactured in 2012 by leading European producers Krones, Sidel, and Kettner. The line is designed for high-capacity beverage production, handling up to 42,000 bottles per hour in 0.33 L contour bottle format. It includes all necessary components from depalletizing to final palletizing and labelling, making it a complete turnkey system for bottling operations. The line underwent annual maintenance in August 2025 and was stopped on September 1st, 2025. It remains installed and connected, and can be inspected upon request. Technical data  Capacity: 42,000 bph Formats: 0.33 L contour bottle Application: Beer, CSD, or other beverages in returnable glass bottles Line length: Approx. 103 × 29 m Condition: Excellent; maintained until shutdown (September 2025) Availability: Immediate Status: Still installed and connected Scope of Delivery  Depalletizer | Kettner | 60 pallets/hour | 1992 | Automatic, glass bottles Decrater | Kettner | 2,500 crates/hour | 1992 | For returnable crates Crate washer | Seroba | 2,500 crates/hour | 1992 | Stainless steel, single bath Bottle washer | Krones | 47,200 bottles/h | 2010 | Multi-zone cleaning Empty bottle inspection | Heuft | 46,000 bottles/h | 2012 | Camera system Filler | Krones | 42,300 bottles/h | 2012 | Glass bottles, return operation Labeller | Krones | Topmatic | 2012 | 2 stations (body & back), pitch 125mm + Checkmat Fill level & closure inspection | Heuft | 43,000 bottles/hour | 2012 | Sensor & camera system CIP & mixer station | KHS | 16,500 liters/hour | 2011 | Integrated, fully automatic Printer | Videojet | 43,000 bottles/hour | 2012 | Inkjet printer Packing machine (Crater) | Kettner | 2,200 crates/hour | 1992 | Automatic Palletizer | Kettner | 50 pallets/hour | 1992 | Automatic Pallet wrapper | Robopac | 50 pallets/hour | 1992 | With stretch film Pallet labeler | Logopak | 60 pallets/hour | 2014 | Labeling of pallets Bottle conveyor belts | Sidel Gebo | – | 2012 | Stainless steel conveyor technology Ncodpfxjxrcv No Ad Een

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Julabo CF30 Cryo-Compact Thermostat, Economy Series The CF30 comes from a very well-known plant manufacturer in Germany. All Julabo units we offer originate from the same highly reputable source and were only in operation for approximately 14 days. They were part of a large-scale system that ultimately was not integrated into regular production, so the devices were used exclusively for test runs. Documentation: A comprehensive operating manual with all technical data is available! Technical Data and Specifications: ✅ Manufacturer: Julabo ✅ Model: CF30 Cryo-Compact ✅ Temperature range: –30 °C to +150 °C ✅ Temperature stability: ± 0.03 °C ✅ Heating capacity: 2 kW (230 V) ✅ Cooling capacity (at –20 °C / 0 °C / +20 °C): 0.15 kW / 0.25 kW / 0.32 kW Ncodjxaz Hvjpfx Ad Eon ✅ Refrigerant: R134a ✅ Circulating pump flow rate: approx. 15 l/min ✅ Pump pressure: approx. 0.35 bar (open), max. 5.1 bar (closed) ✅ Bath fill volume: 2–3.5 l ✅ Connection thread: M16×1, with hose adapter Ø 8/12 mm ✅ Dimensions (W×D×H): approx. 24 × 46 × 40 cm ✅ Weight: approx. 35 kg ✅ Interface: RS-232 for external control ✅ Safety class: III (FL) according to DIN 12876-1, IP21 ✅ Special features: LED display with 0.1 °C resolution Splash-proof keypad Early warning system for low fluid level Front drain valve for easy fluid replacement ATC calibration (3-point) Marlotherm heat transfer oil was used in the heating bath.

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. Additional information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock Nodpfx Adex D Dlio Eecn • Directed spindle stopOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Double wall corrugated pipes – 150mm to 350m Material Dryer and loader– M+H Equipment, Germany Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Nedpfx Adovztb So Eecn Tube Deposit Unit -500

Condition: used, This listing is for the Grant QBT1 Heat Block The unit is in full working condition and is ready for immediate release Nodex S H D Hspfx Ad Eecn The Grant Model QBT1 Dry Block Heater With 24x10.5mm Well Block is a compact dry block heater designed for laboratory temperature-controlled heating of small sample tubes. It’s part of Grant Instruments’ dry block heater family, used widely in molecular biology, biochemistry and general lab work for consistent incubations or reactions in tubes A dry bath / heat block heater that provides precise, stable heating for tubes (especially 1.5 mL Eppendorf-style tubes), without using water or oil baths. The heat is delivered through a removable aluminium block tuned to fit a specific tube format — in this case typically 24×1.5 mL tubes

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Ncodpfxsyiaf Ij Ad Esn Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, total width: 2,775 mm, total length: 4,640 mm, input voltage: 400 V, input current: 50 A, working width: 1,600 mm, cutting height (max.): 25 mm, compressed air connection: 6 bar, Bullmer TURBOCUT S 2501 CV – Conveyor CNC Controlled Cutter for Multi-Layer Cutting Knife-cutting system including drilling unit from company liquidation. Excellent condition, top specification, and fully operational. The CNC cutter was used for cutting lightweight women’s outerwear. It was not subject to heavy use and was handled with extreme care. The machine was fully operational up until the last day of use (04/2025), and received a complete service shortly before decommissioning. Wear parts, such as the cutting bristles, are in very good condition. Pneumatic hoses and connectors (Festo) were replaced in 11/2024. BY THE WAY: We are a BULLMER service partner and authorized dealer. Manufacturer: BULLMER Spezialmaschinen GmbH & Co. KG, Mehrstetten Condition: USED Assessment: Very good Year of manufacture: 10/2007 Nedpfx Adsyh Nluj Escn FEATURES: Cutting height: up to 25mm (compressed) Working width: 1,600mm Cutting window length: 1,800mm Total length: 4,640mm Total width: 2,775mm Operating system: WinXP Original price: €105,000.00 (net). Further functions: Tilt correction, double cut suppression, and much more. CONNECTIONS: 1. Control cabinet for vacuum pump, bristle and cleaning bath Voltage: 400 V, 50/60 Hz Phases: 3 PH / N / PE Power rating: 2.5 + 15 kVA Main fuse: 50 A 2. Control cabinet for controller / PC Voltage: 400 V, 50/60 Hz Phases: 3 PH / N / PE Power rating: 3 kVA Main fuse: 16 A SITE REQUIREMENTS (RECOMMENDED): Protection: 3 x 50 A slow-blow Cable cross-section: 5 x 10 mm² Complete documentation included in delivery: * Operating instructions * Spare parts lists * Manuals * Circuit diagrams * EC Declaration of Conformity COLLECTION: COLLECTION ONLY in D-32107 Bad Salzuflen – NO SHIPPING! Loading onto trailer/truck is possible indoors in our large facility (dry loading). LOADING: We can assist with loading using our equipment (forklifts, pallet trucks, etc.) at cost. Load securing: Adequate securing materials must be provided by the buyer: anti-slip mats, lashing straps, etc. ADVANTAGE: The cutter has been disassembled for easier transport. Collection is therefore very simple. We collected it ourselves with a single car trailer (loading area 6 x 2.2m). Currently, the cutter is in the described, dismantled and ready-for-collection condition. NOTE REGARDING WARRANTY/LIABILITY: This item comes from a company liquidation. Items from a verified company liquidation can be inspected and function-tested on site as far as possible. Sold as seen/inspected – any warranty or liability is excluded. By taking possession, the buyer agrees to these terms. COMMERCIAL SALE: You will receive a proper invoice with VAT shown. Errors excepted.

Condition: new, * IMMEDIATE AVAILABILITY * Including full aluminium floor / tiltable loading area / winch / wheel chock bar / spare wheel Technical Data: • Type: New vehicle • MOT: New/2 years • Availability: IMMEDIATELY! • Permissible total weight: 3,500 kg • Unladen weight: approx. 920 kg • Payload: approx. 2,580 kg • Internal dimensions: 550 x 208 x 0 cm (L x W x H) • Overall external dimensions: 722 x 215 x 100 cm (L x W x H) • Loading edge height: approx. 57 cm • Tyres: 195/50R13C steel rims • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: at extra cost • Includes vehicle registration documents Standard Equipment: • Aluminium floor – extremely robust • 1 moveable wheel chock bar • Very sturdy welded steel frame • Tilting loading bed operated by manual hydraulics + 2 lift cylinders • Frame fully hot-dip galvanized (immersion bath) • Numerous robust cross members for high point load capacity • Additional continuous longitudinal beams welded in • 14 lashing rings inside the loading area, rubber coated (750 kg each) • Reverse automatic system • ALKO overrun hitch and parking brake • ALKO coupling head • Extremely sturdy reinforced V-drawbar • 13-pin connector • Reversing lights • Large-scale safety lighting • LED rear lights • Integrated rear fog lamp • Swivel-mounted lighting • Centrally fitted automatic jockey wheel • Spare wheel mounted under loading area • Registration documents: COC papers Including special equipment: • Winch with winch bracket • Winch removable and moveable, length-adjustable Optional accessories available on request: • 100 km/h approval with shock absorbers • Anti-theft device • Tarpaulin structures • Fixed box body • Side walls • Additional wheel stoppers • Tool box • Additional lashing rings • Reversing lights Ncedpfx Asygc Tlod Esn • Lashing straps • And much more New vehicle with warranty and MOT. ————— - Financing or leasing possible - Nationwide delivery available - Vehicle documents can be sent in advance or export license plates (Germany) can be provided. - Export license plates incl. customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! We have been specialist dealers and service workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. - Subject to errors, omissions, and prior sale -