Used Eddy Current for sale (5,557)

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 327.112, total height: 4,910 mm, total width: 3,270 mm, total length: 1,155 mm, load capacity per storage section: 127 kg, construction height: 4,910 mm, construction width: 3,270 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,972 kg, input frequency: 50 Hz, input current: 7 A, Hänel Rotomat 900 vertical carousel storage system, year 2010, in working order and currently in use. Removed only due to warehouse relocation. Ideal for high-density storage of small parts, jewellery, components, engineering stock, pharmaceuticals, archive items and order-picking applications. Manufacturer: Hänel Model: Rotomat 900 Year: 2010 Specification: Nksdpfx Ageyu Rrxowjw 22 carriers Max load per carrier: 127 kg Max total load: 2,794 kg Carrier size: 2,838 mm wide x 416 mm deep Machine dimensions: 4,910 mm high x 3,270 mm wide x 1,155 mm deep Stainless work surface 400V 3-phase supply MP12N-S-TFT control system Ethernet / webserver / barcode interface Condition: Machine is powered and can be seen operating Clean, well-kept unit from a jewellery business environment Sold only because of warehouse move Sale terms: Viewing available by appointment Buyer responsible for disconnection, dismantling, loading and transport Further photos / video of operation available on request

Condition: like new (used), Year of construction: 2017, functionality: fully functional, total length: 1,120 mm, total height: 1,490 mm, total width: 660 mm, type of input current: AC, product height (max.): 120 mm, product height (min.): 1 mm, product length (min.): 50 mm, product length (max.): 430 mm, product width (max.): 290 mm, product width (min.): 50 mm, input voltage: 230 V, input current: 13 A, overall weight: 100 kg, power: 3 kW (4.08 HP), film width: 400 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), table width: 320 mm, table length: 460 mm, Equipment: documentation/manual, 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine – UNUSED – As New Used 2017 Robert Seal Corp SC346 heat shrink wrapping machine for sale. Never used from new, single phase, compact shrink wrapper, excellent condition. Machine Manufacturer: Robert Seal Corp. Model: SC346 Machine Type: Heat Shrink Wrapping Machine Year: 2017 Condition: Never used from new. High-Quality Heat Shrink Packaging Machine for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine, supplied new and never used from new. The machine is in very good / as-new condition, making it an excellent opportunity to acquire a modern shrink wrapping system at a fraction of new cost. Designed for efficient, professional heat-shrink packaging, this compact and reliable machine is ideal for manufacturing, food, print, distribution, e-commerce, and general packaging applications. Key Features & Benefits Robert Seal Corp SC346 Heat Shrink Wrapper Manufactured 2017 Never used – unused stock Compact footprint Simple, reliable operation Single-phase power – easy installation Ideal for small to medium production runs CE marked Technical Specifications – Robert Seal Corp SC346 General Machine type: Heat Shrink Wrapping Machine Model: SC346 Year of manufacture: 2017 Condition: Very good – never used Supplier: Robert Seal Corp CE compliant Power & Electrical Power supply: 230V – 1 Phase Frequency: 50 Hz Installed power: 3.0 kW Current: 13.6 A Dimensions & Weight Overall machine dimensions: Length: 1120 mm Width: 660 mm Height: 550 mm Machine weight (without stand): 69 kg Working table height (on stand): 940 mm Sealing & Packaging Capacity Sealing area: 320 × 460 mm Minimum package size (A × B × C): 50 × 50 × 1 mm Maximum package size (A × B × C): 430 × 290 × 120 mm Note: B + C must not exceed 350 mm Film type: Centre-fold shrink film Maximum film thickness: 60 gauge Typical film dimensions (D-F-E): 400 × 250 × 75 mm Operating Characteristics Acoustic noise level: 71.8 dB Compact, energy-efficient heat tunnel Suitable for continuous or intermittent operation Ideal Applications Product shrink wrapping Food & beverage packaging Nsdpfx Aoydqm Iogwskw Printed materials & cartons E-commerce fulfilment Contract packing operations General manufacturing & distribution Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used & unused machinery Machines honestly described and inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), ABB robot and changeover table Nkodpfx Agoyw R Akewsw Currently in production about to decommissioned Please feel free to contact me if you have any additional questions

Condition: ready for operation (used), Year of construction: 1999, For sale Heller MCP-H 460 HS Unipro controller Horizontal 4 axis machine center with direct drive spindle Working range X 2000mm Y 1400mm Z 1250mm Thermo-symmetric gantry column design Pallet system designed for high performance/ production Manufactured 1998 Currently in production, being decommissioned very soon Nodpfxjyw Rwze Agwskw Additional tool carriage at rear to standard one also controlled with a separate unipro controller Please feel free to contact if you require any additional information

Condition: excellent (used), functionality: fully functional, operating hours: 7,665 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Amada, controller model: AMNC, laser type: CO₂ laser, laser source manufacturer: Amada, laser source model: AF4000E, laser hours: 5,109 h, laser power: 4,000 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 900 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 20 m/min, cutting speed: 20,000 mm/min, positioning speed: 100 m/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, workpiece weight (max.): 920 kg, power: 60 kW (81.58 HP), input voltage: 400 V, input current: 100 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 12,000 kg, total length: 9,000 mm, total width: 3,000 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, AMADA FO3015 4kW CO₂ Laser Cutting System – 2016 – Under Power for sale. Our laser has the complete integrated Amada laser system including the automatic loader, chiller, and extraction. This machine is currently in production and available for inspection. Please see the below technical details on this laser: • 4kW CO₂ • 3000 x 1500mm bed • Cutting capacity up to 20mm • Cutting Hours: 5,109 • Operating Hours: 7,665 • Installation: 2016 We are open to providing photos and operational videos if requested. This will be available from the 23rd of March 2026. Nkodpsyi E Rrjfx Agwew

Condition: used, functionality: unexamined, Year of construction: 2015, 2015 ('15') Mercedes Benz Atego 1324L Unvi 41 seat coach Current usage: 252,247 miles MOT valid until 16/10/2026 Nkjdpfxeyuw Hij Agwew

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 22675, type of input current: three-phase, input voltage: 400 V, disc diameter: 300 mm, rotational speed (max.): 3,600 rpm, rotational speed (min.): 600 rpm, overall weight: 410 kg, spindle diameter: 25 mm, wheel diameter: 300 mm, wheel width: 50 mm, Equipment: double-sided, rotational speed infinitely variable, ✨ 2016 Ciclope DBC 400/2-MV Double Ended Polishing Machine – For Sale in Ireland (Very Good Condition) Nsdpfx Aswqrltegwekw Enhance your metal finishing capabilities with this high-quality Ciclope DBC 400/2-MV Double Ended Polishing Machine, manufactured in 2016 and currently available in very good condition. Built in Italy, Ciclope machines are trusted by professionals across the metal fabrication and surface finishing industries for their durability, precision, and powerful performance. This robust double-ended polishing system is ideal for stainless steel, aluminium, brass, and other metal components. Whether you're polishing flat parts, round tubes, or intricate shapes, the DBC 400/2-MV delivers consistent, high-speed results with minimal vibration and excellent control. ✅ Key Features – Ciclope DBC 400/2-MV (2016) Year of Manufacture: 2016 Condition: Very Good – Fully operational Type: Double-ended polishing machine Motor Power: 2 x 3 kW (per side) Polishing Wheel Diameter: 300 mm Polishing Wheel Width: 50 mm Spindle Diameter: 25mm Spindle Length: 110mm Spindle Speeds: 600 to 3600rpm Spindle Speed: Variable (MV = motovariator model for adjustable speed) Electrical Connection: 3ph/400V/50Hz Machine Weight: 410kg Workpiece Compatibility: Flat and round components, small to medium size Construction: Heavy-duty cast iron base for stability Integrated Tool Rests and Safety Guards Brake: Electronic Brakes and Stop Pedals Electrical Controls: 24V CE certified, user-friendly panel 🧰 Machine Applications High-speed surface finishing of stainless steel and non-ferrous metals Pre-polishing, mirror polishing, or deburring Ideal for fabrication shops, decorative finishing, and precision engineering Dual-head configuration increases throughput and flexibility 📦 Included in Sale Ciclope DBC 400/2-MV polishing unit 2 x polishing spindles with guards Adjustable tool rests Control cabinet and safety system Ready for use in workshop or production line 📍 Available Now in Ireland Located in Ireland, this machine is in stock and available for immediate inspection and delivery. We provide nationwide shipping, with options for UK and European delivery upon request. 📞 Enquire Now Don’t miss this opportunity to own a premium Italian-made polishing machine in excellent working condition. Perfect for professionals who demand reliability and a high-quality finish. Ciclope DBC 400/2-MV for sale in Ireland Double ended polishing machine used Industrial metal polishing machine Ireland Surface finishing equipment for stainless steel Polishing machine with variable speed control Used Ciclope metal polishing machine Heavy-duty polishing grinder for aluminium and brass Mirror finish polishing machine Ireland / UK / Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST Nodpfx Aov Sq Rlegwokw 630/150 die and rolls Force Feeder with a 0.9KW motor Currently undergoing full refurbishment - Seals &bearings included Colour - customers option Customer to arrange collection and freight

Condition: refurbished (used), Year of construction: 2010, functionality: limited functionality, Alpina Swopper 330 litre Bowl Cutter Year 2010 Motor power 141 Kw Multispeed knife and bowl Noise cover Power up knife lid 6 x knives Unloader disc Tote bin loader Currently being refurbished New knife shaft bearings fitted Nodpfx Ageykt Sgswjkw Hydraulic rams being checked and new seals fitted Main motor being rewired, machine stripped out to clean. 6 x knife speeds with 2 x reverse knife speeds 4 x bowl speeds With machine manual and drawings

Condition: ready for operation (used), Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 9007933, number of ink cartridges: 5, color channels: 5, resolution (max.): 1,000 dpi, paper weight (min.): 90 g/m², paper weight (max.): 10,000 g/m², paper width (min.): 200 mm, paper width (max.): 2,050 mm, paper height (max.): 50 mm, total length: 6,500 mm, total width: 6,500 mm, total height: 1,800 mm, Durst P10 200 HS – 2m Hybrid UV Printer (4 Colour + White) Well-maintained Durst P10 200 HS available due to upgrade. Machine is fully operational and currently configured in 4 colour + white. This is a high-quality industrial UV printer, ideal for rigid and roll media, known for its precision, reliability, and build quality. Key Details: Model: Durst P10 200 HS Print Width: 2 metre (hybrid – rigid & roll capability) Configuration: CMYK + White Fully working and in production Requires replacement printheads (reflected in price) Additional Info: Nkjdpfx Agoyv Dh Rswew Excellent opportunity for refurbishment or parts Ideal for a business looking to enter UV printing at low cost Can be seen running (if applicable) Loading / decommissioning support available Reason for Sale: Upgrading equipment within our production facility Location: UK

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: ELB0109, cooling capacity: 720 kW (978.93 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,500 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 15 bar, volume flow: 65 m³/h, total width: 406,000 mm, total length: 225,000 mm, total height: 247,000 mm, noise level: 72 dB, input frequency: 50 Hz, Trane Air-Cooled Chiller GVUF205 X XLN – 2018 Manufacturer: Trane (France) Model: GVAF 205 X XLN Year of Manufacture: 2018 Njdew R Ualjpfx Agwskw Serial Number: ELB0109 Type of Cooling: Air-cooled (screw chiller) Cooling Capacity: ~720 kW, 620kcal/h Refrigerant: R134a (2 independent circuits – 75/70 kg, GWP 1430) Power Supply: 400 V / 50 Hz / 3-phase Maximum Current (A max): 506 A Starting Current: 596 A Short-Circuit Protection (ICC-LRA): 35 kA Design Pressure: Refrigerant circuit: LP 15 bar / HP 18.8 bar Water side: 10 bar Operating Conditions: Ambient Temperature Range: –10 °C … +46 °C (optional Low Ambient Kit: up to –25 °C) Water Flow Rate: ~65 – 108 m³/h Evaporator water content: ~120 L Dimensions & Weight: Overall Weight: 4 414 kg Dimensions (L × W × H): 4 060 × 2 250 × 2 470 mm Key Features: High-efficiency air-cooled screw chiller. Two independent refrigerant circuits ensure reliability. Uses R134a refrigerant, environmentally compliant. Extra-Low-Noise (XLN) version – optimized for reduced sound emissions. Suitable for industrial and commercial cooling applications. Condition: ✔️ Good working condition ✔️ Regularly maintained ✔️ Immediately available

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, MarelliGenerator Alternator Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Nodpfxjwx H Hzj Agwekw Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation: 500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use Low maintenance – no chemical batteries

Condition: used, Used guillotine / shear for sale with non ferrous falling sheet support Used guillotine / shear for sale with non ferrous falling sheet support EDWARDS PEARSON D.D 2500mm x 3.5mm mechanical Guillotine for sale Direct drive guillotine / reliable sheet metal cutting machine Model: Truecut Nksdpfefuam Hex Agwew Control programmable / Front operated back gauge Datum Elgo control Back stop / back gauge Rapid blade gap adjustment Squaring arms Front sheet support arms Rear infra-red safety guarding Roving foot switch Year 1999 Can be seen working Manufactured in England Current blades are in good condition however new blades are available at extra cost Delivery and installation available at extra cost Also 2metre, 3metre dd guillotines for sale. Also Keetona Hydraulic guillotines for sale

Year of construction: 2000, condition: good (used), High quality used Edwards Pearson pr6 7axis cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2000 5 axis back gauge – z1, z2, x, x1 and r axis – 7axis in total – multi axis Taper finger / tapered finger Crowning Cybelec CNC control Machine in good working condition Fully serviced The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. Nkodpepr U Tdjfx Agwew We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Year of construction: 2001, condition: good (used), Quality used Edwards Pearson pr6 cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2001 Nsdpfx Agsh An Uaswskw Hydraulic R upper clamping T5 Table 4 axis back gauge – z1, z2, x and r axis – 6axis in total Cybelec DNC1200 Machine in good working condition including a full length set of upper & lower Pressbrake tooling. Serviced by Bystronic uk Edwards Beyeler tooling P5R – R1 – 1030 full length top and bottom The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: excellent (used), Year of construction: 2008, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, number of axes: 7, type of crowning: CNC-controlled, overall weight: 10,800 kg, pressing force: 150 t, working length: 3,100 mm, working range: 3,100 mm, Equipment: CE marking, lower tooling, safety light barrier, upper tooling, For sale: 1 used High quality / very good condition German made Bystronic Pr150 3metre x 150ton cnc pressbrake With goose neck upper tooling that is 2 years old Bystronic Beyeler PR 150×3100 Make: Bystronic Model: PR 150 Pressure Reference Year / new: 2008 Total axis: 7 – 5axis back gauge X R Z1 Z2 X1 Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 1500ton Cnc control: Cybelec Modeva 10s Fully serviced with Bystronic uk – as attached per photo General Information: Model: PR 150 x 3100 Manufactured: 2008 Specification: Working length mm 3100 press force kN 1500 stroke mm 315 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Weight kg 10800 Electrical values: Power of main motor kW 11 Total Connected Load kW 15 Operating voltage V AC 3ph 400 Frequency Hz 50 Nksdpfxoh Eyxks Agwjw Control Voltage v DC 24 Nominal Current Fuse A 35 Pneumatic: Max operating pressure bar 8 Hydraulic: Max accumulator pressure bar 300 Complete with used tooling yet we can also quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with training with your operators available

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Modula ML50 Vertical Lift Module – Excellent Condition – Buyer to Remove – Ideal for Warehousing, Aerospace, Engineering & E‑Commerce This Modula ML50 Vertical Lift Module is being sold directly by a UK PLC following a site reconfiguration. The unit is in excellent working condition, has been professionally serviced, and offers a highly efficient automated storage and retrieval solution for operations looking to optimize space and improve material flow. The ML50 series is known for its reliability, high load capacity, and fast picking performance. This unit is suitable for aerospace, automotive, engineering, logistics, e‑commerce, medical device distribution, and any environment where space efficiency and accuracy matter. Key Specifications Nkjdpfoyiaq Dox Agwsw Model: Modula ML50 Net Payload: 500 kg Tray Dimensions: 4,100mm (Wide) x 654mm (Depth) Software: Modula WMS / Copilot interface (specify version) Year of Manufacture: 2017 Condition: Fully operational, excellent mechanical condition Availability: Immediate Location: UK Important Note Buyer is responsible for all decommissioning, dismantling, and removal from site. Access details and site constraints can be provided on request. Inspection available by appointment Machine is currently installed and can be seen in operation

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7717000257A, overall weight: 1,550 kg, load capacity: 1,500 kg, input voltage: 400 V, input current: 20 A, type of input current: three-phase, Equipment: documentation/manual, DMG Mori PH150 Pallet Handling System (2023) – 4 Station –Very Low Use 2023 DMG Mori PH150 automatic pallet handling system in excellent condition with minimal prior use. Available immediately. Currently in storage and ready for installation into a new facility or existing machining cell. Specification: 4-position pallet handling system 4 x pallets included 1 x Pneumatic chuck for machine bed Pallet size: 500 x 500 mm Max pallet load: 250 kg Max load per level: 1,500 kg Njdpfx Aeyvhuhegwokw Axis travel: X 2,170 mm / Z 75 mm / C 360° Power supply: 400V Condition: Installed 2023 Very low usage prior to decommissioning Stored in good condition Not currently installed or under power Key Benefits: Significant saving vs new Immediate availability (no OEM lead times) Ideal for increasing spindle utilisation and automation capability Compact, high-efficiency pallet system Important Information: Equipment is currently in storage and not commissioned Sold as seen Buyer responsible for transport, installation and commissioning Assistance with loading can be discussed if required Additional Information: Second identical unit also available if required Viewing can be arranged by appointment Specification and details are provided in good faith but are not guaranteed. Buyers are encouraged to verify all details prior to purchase.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, clamping force: 550 kN, total length: 4,220 mm, total width: 1,105 mm, total height: 2,040 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Nkjdeypcltspfx Agwsw Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 55A which is very similar to the BOY 55A machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Nodpfxsxd Dgyj Agwokw Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Why Choose the XYZ 2-OP? • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.

Condition: used, Year of construction: 1999, total length: 4,850 mm, total width: 1,350 mm, total height: 2,830 mm, Weight: 850 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 905312 Nkjdpfx Agjyfdvljwow - Max. cutting height vertical [mm]: 2150 - Max. cutting width [mm]: 4150 - Max. cutting depth [mm]: 55 - Max. saw blade diameter [mm]: 250 - Vertical cutting: Yes - Voltage [V]: 380 - Current consumption [A]: 6 - Power [kW]: 2.2 - Transport dimensions: 4850mm x 1350mm x 2830mm (l x w x h) - Transport weight [kg]: 850kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Weight: 1.600 kg Nsdpoyf H H Hefx Agwokw - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, total height: 2,200 mm, total length: 3,540 mm, total width: 900 mm, Price: On request - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB00007737 - Number of units [pcs]: 7 - └ 1st unit type: - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 34 - Transport dimensions: 3540mm x 900mm x 2200mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Nedpfsyw Sdcsx Agwekw

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AA1/017355 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 9.5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 1810 - Y-axis maximum stroke [mm]: 1550 - Voltage [V]: 400 - Current consumption [A]: 31 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets Nodpfswnii Rsx Agwskw

Condition: used, Year of construction: 2014, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: No - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1550 - Z-axis working range [mm]: 160 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nsdpfx Aox Hwhxsgwekw Glenn Smeets