Used Eccentric Press 1200 Ton for sale (21,657)

Year of construction: 1990, condition: excellent (used), Presskraft 800 kN , Hubverstellung 30 - 240 mm , Stößelverstellung 80 mm , Hübe 30 - 90 / min , Tisch 1.200 x 800 , Durchfalloch 350 x 370 , Stößel 900 x 450 , Aussladung 410 , max. Tisch - Stößel 695 , Auswerfer , Ausweferweg 70 , Stößelgewichtsausgleich , Öl-Luft -Kühlanlage , sichere Steuerung III Höhe 3.600 Breite 1.660 Tiefe 2.400 Gewicht 12.100 kg Lrodsiuxwqspfx Al Ijn

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 1,100 kg, 40 ton eccentric press MIOS, type C Lrjdpfx Aljywylhj Isn

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SUPPLY • EBU H 12 FT eccentric press • Siegfried SPC control unit 2. DOCUMENTATION • Complete operating documentation available 3. TECHNICAL DATA Year of manufacture: 2013 Type: Eccentric press Rated force: 120 kN Max. tool installation height: 170 mm Max. weight of upper tool part: 25 kg Stroke adjustment range: 30 mm Ram height adjustment: 40 mm Stroke rates: 40-200 1/min Lredefrzlmopfx Al Ijn Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Year of construction: 1966, condition: good (used), Machine number: 6665/66 Type / Model: PEDV 10/II-S Pressing force: 10 t Table: 450 x 300 mm Ram: 190 x 140 mm Ram stroke: 6 to 50 mm Downward ram adjustment: 45 mm Upward table adjustment: 140 mm Die opening: 140 mm Overhang: 170 mm Maximum distance between table and ram: 320 mm Stroke rate: 160 /min Sheet metal thickness per stroke: 2 mm Sheet metal thickness for continuous stroke: 1 mm Connection: 1.2 kW Accessories/Equipment: Condition: good Ljdpfxeh Tktis Al Iorn Weight: 1.0 t Dimensions: 900 x 850 x 2,200 mm

Condition: used, Eccentric Press, C-Frame Press, Helmerding EH 35 B, Used Machine Manufacturer: Helmerding Type: EH 35 B Year of Manufacture: 1985 Weight: 2500 kg Technical Specifications: Press Capacity: 35 tons Stroke Length: 70 mm Table Dimensions: 600 x 450 mm Operating Modes: Continuous / Single stroke (Inching) Safety: Two-hand safety start control Ledpsy D Uhdofx Al Iern Dimensions: Overall Dimensions: 1020 x 1600 x 2400 mm Additional Information: Note: The base plate (bed plate) is not included with the machine.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Pneumatic clutch-brake group Adjustable stroke length using a toothed ring Balancing cylinders Slider adjustment mm 70 Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Power kW 4 Lrodpfoyn Rhyjx Al Ijn User manual and electrical installation in English. Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally

Condition: used, total length: 2,650 mm, total width: 1,600 mm, total height: 3,350 mm, Empty weight: 9.000 kg Ledoxry Szspfx Al Iern Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: CNC - Press force [ton]: 70 - Min. stroke [mm]: 10 - Max. stroke [mm]: 90 - Table length [mm]: 650 - Table width [mm]: 495 - Ram width [mm]: 400 - Transport dimensions: 2650mm x 1600mm x 3350mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Lrsdev T Dapspfx Al Ien Stroke adjustment from 10-140 mm Ram adjustment 80 mm Stroke rate 50 /min.

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Lrjdeydpxvjpfx Al Ion Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, pressure 150 t Lodpeyuqdhofx Al Isrn Table dimensions 1000 x 360 mm voltage 400 V

Year of construction: 1981, condition: ready for operation (used), An eccentric press is offered. Press force: 45000kg, stroke: 8mm - 60mm, stroke rate: 80rpm - 400rpm, ram adjustment: 60mm, table area X/Y: 600mm - 700mm/450mm - 500mm, ram area X/Y: 450mm/300mm, installation height: 300mm - 350mm. Digital process monitoring, electronic cam control, servo feed control, pneumatic clutch-brake combination. Weight: approx. 4500kg, overall dimensions X/Y/Z: approx. 1800mm/1400mm/2600mm. Inspection possible by arrangement. Lrsdoy Tar Hopfx Al Ijn

Year of construction: 1979, condition: ready for operation (used), An eccentric press is offered. Press force: 7500kg, stroke: 1mm - 40mm, stroke rate: 60rpm - 240rpm, ram adjustment: 70mm. Precision roller feed, external control unit, digital process monitoring, sound insulation cabin, strip decoiler. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 1400mm/1200mm/2100mm. Inspection possible by arrangement. Ljdpfey Tar Tox Al Iorn

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. Ljdey Erzdjpfx Al Iorn 2x HITACHI SEIKI CNC lathes

Condition: used, Bruderer Press BSTA30.  30 Ton Capacity, Digital Display. Variable Range 100-600 RPM Stroke Adjustment 8-40mm Ram adjustment 40mm Drive Motor 5.5KWMax material Width 120mmMax Material Thickness 3mm Lsdpjx Sr Nbjfx Al Ijrn

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Lredpfxjy Hqz Sj Al Ijn Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 250 t, table width: 1,120 mm, table length: 800 mm, total length: 25,800 mm, total width: 13,500 mm, total height: 29,750 mm, overall weight: 12,800 kg, height adjustment type: mechanical, stroke adjustment: 140 mm, Equipment: documentation/manual, Eccentric Press LE 250C. Year of manufacture: 1989 (ZTS - SLOVAKIA). New control cabinet according to the original schematic, central lubrication pump. Max. pressing force: 250 tons. Stroke: 30–140 mm. Max. number of strokes per minute: 45. Slide adjustment: 110 mm. Maximum slide-to-table distance: 450 mm. Slide clamping area: 800 x 475 mm. Table clamping area: 1120 x 800 mm. Motor power: 20 kW. Dimensions (Height x Width x Length): 2975 x 1350 x 2580 mm. Weight: 12,800 kg. Lrjdpfetq Eqxjx Al Ien

Condition: excellent (used), Year of construction: 1982, LEN 25C Eccentric Press. year of manufacture 1986(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 25 tons - number of jumps in the machine: 76/155 min - number of strokes manual work: 45/60 min Ledpfxok Nltlj Al Ijrn - slider stroke adjustment: 8-85 mm - slide stroke: 55 mm - table surface: 560 x 450 mm - slider area: 355 x 225 mm - clearance between columns: 250 mm - number of gears: 2 - engine power: 2.2 / 3 kW - dimensions of the press: 1135 x 1365 x 2145 mm - weight: 2500 kg

Condition: good (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 40 t, table width: 660 mm, table length: 530 mm, total length: 15,850 mm, total width: 12,450 mm, total height: 23,700 mm, overall weight: 4,500 kg, ram adjustment: 80 mm, stroke adjustment: 95 mm, LEN 40C Eccentric Press. Year of manufacture: 1981 (SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 40 tons - number of strokes in the machine: 70/142 min - number of strokes manual operation: 50 min - slider stroke adjustment: 8-95 mm - slider stroke: 80 mm - table surface: 660 x 530 mm - slider surface: 400 x 250 mm - extension: 265 mm - engine power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm - weight: 4500 kg The technical condition of the machine is good. Lrjdpfx Aetzwt Usl Ien It is possible to inspect and check the machine in motion.

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Lredpfx Aljwndnuo Ijn Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: used, Year of construction: 2009, 1250 MT PRESEZZI BRASS ROD OIL HYDRAULIC EXTRUSION PRESS LINE W/ OCN HANDLING Ledpfx Alozad Eve Iorn MANUFACTURER - PRESEZZI YEAR - 2009 SERIAL NUMBER - 2671-2009 PRESS TONNAGE - 1250 MT WORKING PRESSURE - 260 BAR BILLET DIAMETER - 145MM BILLET LENGTH MAX - 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE - 260 BAR RAM DIAMETER - 760MM POWER - 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE - 260 BAR BORE - 160MM ROD DIAMETER - 100MM THRUST FORCE DURING EXTRUSION - 107 TON THRUST FORCE DURING RETURN - 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE - 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OEPRATING PRESSURE - 260 BAR BORE - 160MM ROD DIAMETER - 100MM SEALING FORCE AT 300 BAR - 107 TON OPENING FORCE AT 280 BAR - 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE - 260 BAR BORE - 100MM ROD DIAMETER - 70MM SHEARING FORCE - 20 TON ASCENDING FORCE - 10 TON HIGH PRESSURE REXROTH PUMP GROUP: MAIN PUMPS NUMBER OF PUMPS - 3 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A3VSO0500HSE/30R-PPH13N00 OPERATING PRESSURE - 260 BAR FLOW RATE - 500 CM3/ROTATION PER PUMP ROTATION SPEED - 1000 RPM PER PUMP POWER - 200 KW PER PUMP AUXILLARY PUMPS NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A10VSO140DFR/31R-PPB-12NOO OPERATING PRESSURE - 160 BAR FLOW RATE - 140 CM3/ROTATION PER PUMP ROTATION SPEED - 1500 RPM PER PUMP POWER - 55 KW PER PUMP PILOT PUMP NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A10VSO45 DFR/31-PPA12NOO OPERATING PRESSURE - 160 BAR FLOW RATE - 45 CM3/ROTATION PER PUMP ROTATION SPEED - 1500 RPM PER PUMP POWER - 18.5 KW PER PUMP CONTAINER PUMP NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A11VO40DR/10R-NPC12NOO OPERATING PRESSURE - 300 BAR FLOW RATE - 40 CM3/ROTATION PER PUMP ROTATION SPEED - 1000 RPM PER PUMP POWER - 15 KW PER PUMP MAIN PRESS LINE COMPONENTS / FEATURES COIM AUTOMATED BILLET FURNACE WITH INFEED TABLE BILLET LOADING STATION QUICK CHANGE DIE CHANGEOVER TABLE OCN SINGLE PULLER OCN WALKING BEAM COOLING TABLE OCN ENTRY FINISH SAW FEED TABLE OCN FINISH SAW OCN EXIT BUNDLING TABLE PRESEZZI OPERATORS DESK (LEFT HAND DIRECTION)

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP Ledpfoyk D Dtex Al Ijrn AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW Lredpfjyzd I Usx Al Isn -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, operating hours: 45,000 h, pressing force: 80 t, stroke length: 30 mm, table width: 780 mm, table length: 880 mm, ram plate width: 650 mm, ram plate length: 800 mm, Equipment: CE marking, documentation/manual, Balconi press 80 tons Lrsdpfx Aey Ulbvjl Ien strokes 100-400 adjustable stroke 30 mm distance between columns 350 mm machine weight 15,000 kg optionally available with a soundproof cabin and a feeding line with an 800 mm SARONNI shear.

Condition: used, Year of construction: 2000, gebraucht 2000 070165A prompt, Zwischenverkauf v Italien 27900 € 1 40 to 2.6 mm 650 mm 380 mm 120 mm 8 - 78 mm 145 1/min 6 60 mm 40 mm 195 mm 297 mm 800 mm Lrsdpfx Aoyrhpvsl Isn 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Operating manual with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2002, pressure 80 t throat 300 mm stroke 8-110 mm no. of strokes 100 Hub/min ram - range of adjustment 75 mm table surface area 750x590 mm ram surface 540x400 mm hole in the table 200x200 mm table height 780 mm tool hole in ram Ø 40 mm total power requirement 11 kW weight of the machine ca. 5,5 t dimensions of the machine ca. BxTxH 1200x1700x2700 mm Lrjdpey I Dd Nsfx Al Ien