Used Eccentric Press 1200 Ton for sale (39,197)

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Nsdpfxoxwk E Aj Aa Eodf Model 100 TON M/H-M/C-2 Year 2025 Condition New Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 4868, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard pedestal (base): 95 kg Customs classification: 8462.9930 TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Maximum capacity: 8 tons Maximum cutting section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra-large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard opening in the plate, diameter: 50 mm Opening in the table, diameter: 60 mm Ram bore, diameter x depth: 38x60 mm Ram adjustment (tie rod extension): 70 mm Ram base surface (width x depth): 105x90 mm Required power, HP: 1/3 Flywheel dimensions, diameter x width: 410x85 mm Standard flywheel speed: 180 RPM Ndsdpfxew T S Tzs Aa Esf TECHNICAL SPECIFICATIONS TYPE D-8: Distance from ram center to frame: 100 mm Distance between frame columns: 170 mm Table surface, width x depth: 270x190 mm TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Distance between frame columns: 160 mm Table surface, width x depth: 270x300 mm Unless otherwise stated, these technical specifications are provided without engagement and subject to possible error or omission.

Condition: good (used), Imal press brake with 40 ton pressing force and a working width of 2050mm. The machine is equipped with a new esa s630 (touchscreen) controller. 4 controlled axes: Y1, Y2, X, and R axes. The machine is very complete with tooling, see photos. Nedpfox Dy Itox Aa Esdf

Year of construction: 1962, condition: good (used), Hattler eccentric press EZ5 - stroke: 48 / mm - 2 manual operation - foot operation - width: 70 cm - depth: 80 cm - Height: 150 cm Good condition fully functional can be viewed and tried on site. Shipping also abroad. Ndsdpfx Aaom Thz Re Eef Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 161138, Offer 25457 Technical Data: - Press force: 60 t - Throat depth: 250 mm - Table size approx.: 700 x 500 mm - Drop-through hole in table: 180 mm - Max. distance table – slide plate: 360 mm - Pin hole in slide: 45 mm - Slide adjustability: 60 mm - Stroke adjustment: 10 - 100 mm - Max. stroke rate: 65 strokes/min - Pneumatic connection - Drive: 400 V / 5.5 kW - Space requirement approx.: W 1200 x H 2400 x D 1500 mm Ndsdpfxsx I Iqyo Aa Ejf - Weight approx.: 3500 kg - With: pneumatically operated clutch - Mechanical overload protection - Light barrier - Central lubrication - Two-hand control desk with foot switch

Condition: used, functionality: unexamined, input voltage: 220 V, Eccentric press TT, 220V, with lighting and adjustable stroke Ndedpjx Dkzdsfx Aa Ejf

Condition: used, Year of construction: 1999, Manufacturer: Ebu Model: STA 100/1000 P2 Serial number: 54203/05G Year of manufacture: 1999 Pressing force: 1,000 kN Stroke adjustment: 8 - 140 mm Ram strokes: 50 – 180 strokes/minute Location: 41751 Viersen, Germany Condition: Used, functional Nedpfox Ea Shjx Aa Ejdf Price: €36,974 net / €44,000 gross You are welcome to submit a price offer. Reasonable counteroffers will be considered. When making inquiries, please include your complete contact details. Additional photos available upon request. You are also welcome to view the machine on site. Simply call us to schedule an appointment. This item is being sold as part of insolvency proceedings and shows signs of use accordingly. Maintenance and professional cleaning are the responsibility of the buyer. Sale is made without any warranty. Liability, reduction, and rescission are expressly excluded. We recommend inspection prior to purchase, as the item is sold as seen. All information provided is without guarantee. Subject to errors and prior sale. The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of any liability for visible and hidden defects, in particular technical, qualitative, or performance-related defects and usability. Due to time constraints, only serious inquiries and reasonable offers will be answered! This is solely an advertisement for informational purposes. Inspection by appointment only! Best regards

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 65/2/158/02, throat depth: 280 mm, table length: 580 mm, total width: 820 mm, pressing force: 65 t, stroke length: 120 mm, punching force: 65 t, Used 65ton mechanical power press for sale Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 Ndedpfx Aexqn Unja Eof NOMINAL FORCE (Max stroke) 650 [ KN] MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] MAX TOP TOOL WEIGHT 136 [ daN]

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm Nodjvfhp Sopfx Aa Ejdf no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: good (used), Weingarten Eccentric Press AV10 - with gripper feed - uncoiler and recoiler - During pressing, the speed can be adjusted via frequency converter - Pressing force: 10 t - Strokes per minute: 160 - Ram stroke: 6-60 mm - Ram adjustment: 40 mm Good condition, fully functional, can be inspected and tested under power on site. Shipping also possible abroad. Inspection: I would like to point out that, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to purchase to avoid uncertainties. Should you have any general questions or wish to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. Ndsdpfx Aaox Emvvo Ejf VAT will be shown separately on my invoices. Shipping by freight company.

Year of construction: 2016, condition: like new (used), FORCE 1600 TON MOVING BOLSTER SIZE 5000 X 2480 mm STROKE OF SLIDE 1500 mm MAX OPENING. 2000 mm FORCE OF CUSHION 500 TON STROKE OF CUSHION 400 mm MOTORS POWER 285 Kw Ndodel E D Tdjpfx Aa Esf TOTAL WEIGHT 360.000 Kg

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation Nsdpodx R Tfsfx Aa Eodf - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm Njdpfsvzxttsx Aa Eodf table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 100/2/173/02, throat depth: 330 mm, table length: 950 mm, stroke adjustment: 10 mm, total width: 660 mm, pressing force: 100 t, stroke length: 130 mm, punching force: 100 t, Used 100ton mechanical power press for sale complete with sheet metal feed system Video at the bottom of the listing Ndedpexqn Twefx Aa Eof MODEL 100 CNR 4 SERIAL N° 100/2/173/02 NOMINAL FORCE (Max stroke) 1000 [ KN] MACHINE WEIGHT 7000 [ daN] NOMINAL SPEED 65 [C/min ] VARIABLE SPEED MIN/MAX 30/90 [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 22 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 ( bar ] MAXIMUM STOPPING TIME 0,195 [s] SAFETY DISTANCE 312 [ mm] FLYWHEEL ENERGY 8493 [KJ ] STROKE LENGTH MIN/MAX 10 / 130 (mm ) RAM ADJUSTMENT 100 [mm ] SHUT HEIGHT S.D.A.U. 370 [ mm ] MAXIMUM EJECTOR STROKE 55 [ mm ) TABLE SIZE 68 / 660 / 950 [mm ) RAM SIZE 450 / 540 ( mm) TOOL SPIGOT DIA 60 THROAT DEPTH 330 [mm / MAX TOOL SIZE 450 / 540 ( mm] MAX TOP TOOL WEIGHT 180 ( daN]

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm Ndedpevfhq Aefx Aa Eof table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: used, Year of construction: 1987, Pressure 080 t throat 380 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 472 mm table surface area 840 x 610 mm table height over floor 800 mm Njdpfxovuk Sno Aa Ejdf passage to the back 520 mm ram surface 650 x 400 mm ram adjustment 70 mm power capacity 7,5 kW weight 6,9 t Dimensions (WxDxH) 1,1 x 2,15 x 3,2 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, mechanical overload protection in ram, tie rods to improve rigidity of the press body, two-hand operation as is where is, WITHOUT electrical cabinet / WITHOUT additional work The putting into operation in our warehouse (with new control) / Safety adaptations / mechanical overhaul can be offered additionally on request

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm Nodsvfhp Ejpfx Aa Esdf

Condition: used, Year of construction: 1969, pressure 050 t throat 260 mm stroke 8 - 120 mm no. of strokes 100 /min distance table/ram, max. stroke up, adjustment up 410 mm table surface area 650 x 500 mm hole in the table 250 x 180 mm table height over floor 740 - 980 mm table adjustable 240 mm ram surface 400 x 180 mm Nedpfjvzxr Nox Aa Ejdf ram adjustment 70 mm power requirement 2,2 kW weight 2,3 t dimensions (WxDxH) 1,2 x 1,4 x 2,3 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min Nedpovfhqvefx Aa Ejdf ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: used, Year of construction: 1977, pressure 050 t throat 255 mm stroke 8 - 120 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 640 x 500 mm hole in the table 250 x 180 mm table height over floor 710 - 930 mm table adjustable 220 mm ram surface 550 x 170 mm ram adjustment 70 mm Nedpfxsvzxr Ao Aa Esdf power requirement 4,0 kW weight 3,1 t dimensions (WxDxH) 1,5 x 1,5 x 2,3 m year of manufacture 1951 - modernized 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm Nedpfx Aajvfhqie Esdf tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: used, Year of construction: 1968, pressure 050 t throat 250 mm stroke 8 - 120 mm Nodpfx Aaevzxrij Eodf no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 420 mm table surface area 645 x 510 mm hole in the table 250 x 180 mm table height over floor 700 - 930 mm table adjustable 230 mm ram surface 220 x 185 mm ram adjustment 70 mm power requirement 3,0 kW weight 3,0 t dimensions (WxDxH) 1,1 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm Ndodpfx Ajvfhpxsa Eof

Condition: used, Year of construction: 1977, pressure 063 t throat 250 mm Ndsdpevuk Rkefx Aa Ejf stroke 8 - 100 mm no. of strokes 56 / 84 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 710 x 500 mm hole in the table 320 mm table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,1 t dimensions (W x D x H) 1,35 x 2,0 x 2,6 m year of manufacture 1964 - installation of moving screen 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor for two speed, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual centralized lubrication, foot operation as is where is, WITHOUT putting into operation / WITHOUT additional work The putting into operation in our warehouse / Safety adaptations / mechanical overhaul / new electrical control can be offered additionally on request

Condition: new, Year of construction: 2024, pressure 50 t throat 230 mm stroke 12-110 mm no. of strokes 40-100 Hub/min ram - range of adjustment 70 mm table surface area 740x440 mm table height 840 mm hole in the table Ø 140 mm ram surface 460x300 mm Ndedpovfhqpjfx Aa Eof tool hole in ram Ø 45 mm total power requirement 4 kW weight of the machine ca. 3,4 t dimensions of the machine ca. BxTxH 1500x2500x2510 mm