Used Drying Tower for sale (2,749)

Condition: used, Year of construction: 2009, Liebherr crane 160 HC-L 8/16 including remote control: 160 HC-L 8/16 height: 37.5 m, reach 55 m, serial no. 30349039 Year of manufacture: 2009 Incl. the following crane parts: 1 undercarriage cross Dcedevx Eccepfx Acnsk 2 base ballast A 7.5 to 12 base ballast B 4.8 to 1 boom 611. 10.7m 1 boom 621 8m 2 booms 622 10.35m 1 boom 631 5.18m 1 boom 641 tip 1 base tower 12.42m 5 tower section 4.14m "Completely repaired, sandblasted and repainted! This crane has been completely overhauled and is in excellent condition. Old paint and rust layers were thoroughly removed by sandblasting before a high-quality new coat of paint was applied. Subject to changes, errors and advance sales! You can find more vehicles on our Sales are made exclusively in accordance with our terms and conditions - see Homepage Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not represent an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, Year of construction: 2003, Liebherr Tower Crane 420 EC-H 16 Litronic – 75 m Jib, 16 t Load Capacity Large top-slewing tower crane with Litronic control system, offered with tower sections but without undercarriage. Manufacturer: Liebherr Model: 420 EC-H 16 Litronic Year of manufacture: 2003 Serial number: 43,274 Jib length: 75.0 m Maximum load capacity: 16,000 kg Load capacity at 75 m: 3,200 kg Tower system: 500 HC Tower height: 30.0 m Tower configuration: 5 x 5.80 m Access: inclined or straight ladder Control system: Liebherr Litronic Frequency inverter: available Dedpfx Acoyy Nndsnock Hoisting gear: 65 kW FU Hoisting speed: stepless up to approx. 85 m/min Slewing gear: frequency-controlled Trolley travel gear: frequency-controlled Design: Upper crane with tower (without base frame) Jib and hoisting heights can be extended according to the manufacturer’s data sheet.

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum fuse rating: 16A Frequency: 50/60Hz Electrical connection power: 4.5kW Temperature range: +12°C above ambient temperature to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heating time to 150 °C: 25 min Recovery time after 30 s door opening at 150 °C: 6 min Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per insert: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Maximum number of inserts: 16 External dimensions: Width: 1,165 mm Height: 1,590 mm Depth: 870 mm Internal dimensions: Width: 1,000 mm Height: 1,300 mm Depth: 570 mm Important note: The wheels are installed/included. Dcjdpfxsxzukke Acnek

Condition: used, This listing is for a AdvanDx PNA Fish Workstation Dry Bath Incubator Dcodpfx Acjxzg E Henek The AdvanDx PNA FISH Workstation provides a hybridization incubation platform for PNA FISH applications. The AdvanDx PNA FISH Workstation can hold up to 30 microscope slides.

Condition: used, Year of construction: 2010, functionality: fully functional, We have several Rehm reflow ovens and Rehm drying ovens (paint dryers) for sale. Dsdpfx Aew Srqqocnock The ovens are in good, clean condition and fully functional. 1 x Rehm VXP nitro 3850 (year of manufacture 2010), type 834 (project no. 2680), location: Buchenstraße 18-20 / 93426 Roding = €4,500 (negotiable) We also offer: Asys TRM 03 (year of manufacture 2012) Asys FPS (year of manufacture 2010) Siplace S 27 and Siplace F 5 HM (year of manufacture 2006) Exra X6 HSP (year of manufacture 2008) – spare parts carrier Knodel drying oven (year of manufacture 2015) Nutek Coating Inverter (year of manufacture 2014) and more. Please contact us; we will gladly send you further information and photos of our equipment.

Condition: new, Code: N0555 Brand: TOMAR Dcsdeui Rpxspfx Acnok Model: BELLAGIO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 300 Max distance between uprights mm 2600 Length of arms per side mm 780 Useful gap between arms mm 120 N° 20 Pvc coated shelves Load capacity kg 300 N° 4 swivel wheels for handling ( 2 with locking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 400 x 1900 h - Trolley max opening mm 1650 x 3000 x 1900 h Overall dimensions for transport: mm 1500 x 400 x 1900 h Weight kg 115

Condition: used, PD2052-AC2 / PD2052 AC2 / PD2052AC2, PR1800 + PD500, Hanbell Precise Machinery Co. LTD – Dry screw vacuum pump with display Dcsdpfxoitywre Acnek Model: PD2052-AC2 Type: PR1800 + PD500 Condition: Used

Condition: excellent (used), Full salad wash + dry line, previously washing and drying 350kg of product per hour Infeed elevator (4m x 0.5m) + vibrating pan Barrel leaf washer, capacity approx 350kg per hour. The barrel is 4.5m long x 0.8m diameter Dodevzydajpfx Acneck De-watering conveyor belt with air blowers and vacuum suction 3.5m x 0.8m De-watering conveyor belt with air blowers and vacuum suction 3.5m x 0.8m De-watering conveyor belt 2.75m x 0.6m Vibrating pan 1.5m x 0.4m Lynnmore salad dryer 5.1m x 0.9m Hitec salad dryer 5.1m x 0.9m

Condition: used, functionality: fully functional, fuel type: electric, Year of construction: 2007, Comansa 10CL140 flat-top crane - Available from October 2026; currently, the crane is in operation on a construction site in Brasov, Romania. - In very good working condition; all maintenance performed on time; steel cable replaced in 2025. - Year of manufacture: 2007 - Jib length: 51.6 m - Tower height: 40.6 m Dcodpszr Utgefx Acnsk - Maximum lifting capacity: 8 tons with 4 ropes at a radius of 17.7 m - Nominal lifting capacity: 2.1 tons with 2 ropes at a radius of 55 m - Electrical power: 35 kW - Ground-level control, radio remote control - Tower element dimensions: 1.6 x 1.6 m

Year of construction: 2022, condition: good (used), functionality: fully functional, This is a drying and disinfection system for boots and shoes from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social rooms. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely using ozone and therefore does not require any chemicals. Simultaneous drying takes place using warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimum air circulation. Warm, dry boots increase the well-being of your employees and prevent illness through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED APPLIANCE SERVICE FOR YOU - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning Dcsdpjtt Sgusfx Acnek - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Technical data: - External dimensions WxDxH: 360x470x1950mm - Electrical connection: 230V, 50Hz, 0.55kW - Serial number: 2892/22-60623 - Year of construction: 2022 - Capacity: 5 pairs of shoes Condition: Used, tested and fully functional VERSAND / SHIPPING: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to view something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Year of construction: 2022, condition: good (used), functionality: fully functional, This is a drying and disinfection system for boots and shoes from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social rooms. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely using ozone and therefore does not require any chemicals. Simultaneous drying takes place using warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimum air circulation. Warm, dry boots increase the well-being of your employees and prevent illness through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED APPLIANCE SERVICE FOR YOU Djdpfx Acett Sf Eeneck - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Technical data: - External dimensions WxDxH: 360x470x1950mm - Electrical connection: 230V, 50Hz, 0.55kW - Serial number: 2893/22-60623 - Year of construction: 2022 - Capacity: 5 pairs of shoes Condition: Used, tested and fully functional VERSAND / SHIPPING: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to view something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Condition: good (used), Year of construction: 2000, functionality: fully functional, inner dimension width: 1,100 mm, total length: 10,000 mm, total width: 1,900 mm, Equipment: CE marking, Drying oven used for lacquered and painted sheets. Dsdpfxozbat Es Acnsck

Condition: used, Year of construction: 2006, Liebherr tower crane 140 EC-H 6 Litronic, works number 44.995 Used Liebherr tower crane 140 EC-H 6 Litronic, manufactured in 2006. This top-slewing crane is suitable for high-rise construction, industrial projects, and large construction sites. Delivery includes foundation cross FK 120 HC, tower sections, and additional ballast. Manufacturer: Liebherr Model: 140 EC-H 6 Litronic Machine type: Top-slewing crane Works number: 44.995 Year of manufacture: 2006 Jib length: 60.0 m Hook height: 30.0 m Load capacity class: 6 t Control system: Litronic Foundation cross: FK 120 HC Foundation dimensions: 4.60 m Assembly on A3 plates Additional ballast: 2 x S1 Tower system: GTS 140 HC Tower section: 6.85 m Tower sections: 1 x 120 HC 10.0 m Tower sections: 1 x 120 HC 12.5 m Application area: High-rise construction, industry, construction sites Condition: used Dcjdpfx Aoy Thd Recnok Location: Berlin

Condition: used, Year of construction: 2005, Liebherr top-slewing crane 180 EC-H 10 Litronic, serial number 44.173 Used Liebherr top-slewing crane 180 EC-H 10 Litronic, manufactured in 2005. The top-slewing crane, with a 45.0 m reach, is offered for sale. Suitable for high-rise construction, industrial projects, and large construction sites. Manufacturer: Liebherr Model: 180 EC-H 10 Litronic Machine type: Top-slewing crane Dodpfx Ajy Thdqecnsck Serial number: 44.173 Year of manufacture: 2005 Reach: 45.0 m Load capacity class: 10 t Control system: Litronic Design: Top-slewing crane only Application area: High-rise construction, industry, construction sites Condition: used

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet Dcedezc Hvpopfx Acnek • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 1,785 h, functionality: fully functional, overall weight: 65 kg, Very well-maintained dry ice blasting machine from Cold Jet. Fully functional and tested. Year of manufacture 2012, including nozzles. Regular maintenance carried out. Can only be used with dry ice blocks! Dcsdpfx Aceyzqy Donjk

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands Dodpsu Tipkefx Acneck - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3171 Vacuum drying kiln ISVE ES 2 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 400 mm Net wood volume: approx. 2 m3 Installed electrical power: 5,27 kW Average hourly power input: 2,7 kW/h Includes: - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (40 m3/h / 1,1 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Dcsdeuvi Saspfx Acnok Terms of delivery: ex location

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Dodevc Axpspfx Acneck Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2006, Liebherr Top-Slewing Tower Crane 180 EC-H 10 Litronic – 60 m jib, 10 t lifting capacity; 45,456 Top-slewing tower crane with Litronic control system, offered as upper crane unit without tower sections. Manufacturer: Liebherr Model: 180 EC-H 10 Litronic Year of manufacture: 2006 Dcjdpfxsyy I R Do Acnok Serial number: 45,456 Jib length: 60.0 m Maximum lifting capacity: 10,000 kg Lifting capacity at 60 m: 2,200 kg Configuration: Upper crane (without tower) Control system: Litronic Jib length and hook height can be extended upon request!

Condition: used, Year of construction: 2006, Liebherr Top Slewing Crane 180 EC-H 10 Litronic – 40 m jib, 10 t lifting capacity, 44.997 Top-slewing tower crane with Litronic control, offered as upper crane part without tower. Dcedpfx Aoyy I Ivecnjk Manufacturer: Liebherr Model: 180 EC-H 10 Litronic Serial No.: 44.997 Year of manufacture: 2006 Jib length: 40.0 m Maximum lifting capacity: 10,000 kg Lifting capacity at 40 m: 4,750 kg Version: Upper crane (without tower) Control: Litronic Jib extension possible upon request!

Condition: as good as new (ex-display), Year of construction: 2014, overall weight: 98 kg, total height: 4,950 mm, total width: 5,100 mm, total length: 7,300 mm, Vacuum dryer VS-50 C Internal dimensions (LxHxW) in mm: 405x340x370 Wattage: 230 V 50/60 Hz. 1.52 KW Dedpfxsqmm Npj Acnock Additional shelf 1 pc. The machine is from 2014, but has never been used. Suitable for drying processes at temperatures up to 200°C with connection for a vacuum pump. The vacuum pump is not included. Further technical data can be found in the technical data sheet. A total of 3 shelves are available.

Year of construction: 2006, condition: good (used), Make: Pano Type: automatic 1 head dry vacuum closing machine Model: VKV-15 Serial number: 05-122 Construction year: 2006 Capacity: up to 1.200 jars per hour Frame: stainless steel 1.4301 (AISI 304) Power supply: 380 Volt – 50 Hz – 1,5 kW Features: stainless steel control cabinet excluding conveyor including rotating magnetic cap sorter including vacuum pump including safety housing as-is Dcodoibba Rspfx Acnok or adjusted to customer needs

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. Dedjw Ug Atopfx Acneck TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Condition: good (used), For sale: Conveyor Drying Tunnel for Screen Printing: Manufacturer: M&R (The M&R Companies) Model: Sprint International Power supply: 400–415 V, 3-phase Dcjdpfxjy Au Ubs Acnsk Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. All components are complete.