Used Dry Kiln for sale (2,404)

Year of construction: 1997, condition: used, Built in 1997 Length conveyor belt approx. 55 m Equipment • drying tower upward • infeed left at the bottom Gsdpfxec I Ig Es Afcjua • outfeed 270° at the top

Condition: used, Trolley 12 levels - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. Gedpfx Aswbtvujfcjua - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off Gsdpju Edhuefx Afcoua - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right Guedpfxeu S N R Es Afcja - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm Gsdpfexfkbaox Afcsua - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: ready for operation (used), Laboratory drying oven, heating cabinet, and incubator Shelves adjustable in height at multiple levels Several shelf inserts available Temperature range: 0-250 °C Gsdpfx Aoyk Emiofcsua Internal dimensions LxWxH: 500 x 500 x 480 mm

Condition: good (used), Year of construction: 1991, machine/vehicle number: 2391, Offer 25398 Technical Data: - Temperature continuously adjustable up to 300 °C - Power supply: 220 V - Usable internal chamber: 300 x H 530 mm - Space requirement: approx. 700 x H 750 mm Godpfsygk A Isx Afcoua - Weight: approx. 25 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, For sale: Conveyor Drying Tunnel for Screen Printing: Manufacturer: M&R (The M&R Companies) Model: Sprint International Power supply: 400–415 V, 3-phase Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Gusdpfey Avc Tsx Afcsa Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. All components are complete.

Condition: good (used), For sale: Conveyor Drying Tunnel for Screen Printing: Manufacturer: M&R (The M&R Companies) Gsdpjy Au Ubofx Afcsua Model: Sprint International Power supply: 400–415 V, 3-phase Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. All components are complete.

Condition: used, Drying machine HENRI PETIT JEAN Eco 600A Gsdpfxoyvk Sce Afcsua

Year of construction: 2016, condition: excellent (used), Painting booth Guedpfx Aoygum Rjfcoa Diana serie with horizontal ventilation Modern technology: Dust free operation paint overspray collection system Stable spraying temprature Control box with safety function Length:16000mm Width:6000mm Height:6000mm

Condition: new, functionality: fully functional, machine/vehicle number: XDS35I, overall weight: 50 kg, volume flow: 44 m³/h, input voltage: 230 V, input frequency: 60 Hz, input current: 6 A, rotational speed (max.): 1,750 rpm, Unused Edwards XDS35i Dry Scroll Vacuum Pump in shipping packaging. Gujdpfxsxrtr Ue Afcja Manufacturer: Edwards Model: XDS35i Voltage: 200-230V (6.6A | 50/60Hz) Weight: ~50kg Max displacement: 44 (m3/hr) Max pumping speed: 35 (m3/hr)

Condition: ready for operation (used), Binder ED 240 / E2 Drying Oven Incubator Heating Cabinet Brooder Cabinet No. 1147 Set Temperature: 300°C Dimensions (internal): 800 mm × 500 mm × 600 mm (W x D x H) Dimensions (external): 1040 mm × 800 mm × 820 mm (W x D x H) Weight: approx. 85 kg Power: 2.70 kW You are welcome to arrange a viewing. We can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. Gedpfoyvun Ijx Afcoua Company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from the technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 2022, condition: ready for operation (used), Binder FED 260 Drying Oven Incubator Heating Oven Brooding Cabinet No. 1148 Set Temperature: 300°C Dimensions (interior): 650mm × 515mm × 780mm (W x D x H) Gujdsyvug Rspfx Afcja Dimensions (exterior): 810mm × 760mm × 940mm (W x D x H) Weight: approx. 84 kg Power: 2.30 kW Year of manufacture: 2022 You are welcome to arrange a viewing appointment. We can arrange affordable shipping for you upon request! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop to view more of our offers. All company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are reserved.

Condition: ready for operation (used), Binder BD 115 Drying Oven Incubator Heating Cabinet Brooder Cabinet No. 369 Set temperature: 100°C Dimensions (internal): 510mm × 420mm × 530mm (W x D x H) Dimensions (external): 710mm × 605mm × 705mm (W x D x H) Weight: approx. 55 kg Nominal volume: 112 L Power: 0.40 kW You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued. This requires a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers as well. Godpsyvrm Usfx Afcjua The mentioned company names and trademarks are the property of their respective owners and are used for identification and description of the products only. Variations in technical data and errors in the product description are possible and subject to change.

Condition: ready for operation (used), Memmert SFE 600 heating furnace max. 70°C For further technical data see pictures. You are welcome to come by for an inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Guodpfx Aoip Um Aofcsa Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data and errors in the description of the article can happen and remain reserved.

Condition: ready for operation (used), Heraeus UT 6060 heating furnace no. 415 max. 300°C Dimensions: Outside: 750mm x 730mm x 580mm ( L x W x H ) Inside: 400mm x 350mm x 380mm ( L x W x H ) For more technical data, see pictures. You are welcome to visit for inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data as well as errors in the description of the article can happen and remain reserved. Guedpfelt Ut Rsx Afcja

Condition: used, Binder Model: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven, designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specially designed for applications involving flammable solvents and meets high safety requirements (ATEX compliant). With precise temperature and pressure control, this device is ideally suited for reproducible laboratory and industrial processes. Typical Areas of Application: - Chemical and pharmaceutical laboratories - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: down to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass window with shatter protection - ATEX-compliant design - Multiple shelf levels (number depending on configuration) - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200 °C - Temperature protection: DIN 12880, Class 2.0 Guodpfeyg D Drex Afcja - Weight (empty): approx. 158 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications subject to changes and errors!) Should you have any further questions, we would be happy to answer them by phone.

Year of construction: 2022, condition: new, racks: 17 Godpfx Ajd Ry I Njfcoua support tube spacing: 60mm rack length: 650mm langth: 200 - 2000mm rolls: Polyamid 4 Stück depth: 870 - 1180mm height: 198mm safe load: 400kg

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Gusdpfxsygh I Uo Afcoa Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Certification of Conformity and Safety Standards The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling...

Condition: used, Year of construction: 2015, Tecnomix Centro dry concrete batching plant Year: 2015 Production capacity: 80 m3/h Composed of: 1 - 5-hopper galvanized bin set (central discharge) 3 - 60/70 ton cement silos Godpsyzz Ifjfx Afcjua 1 - Cement weighing system 1 - Additive dosing system 1 - Dust filter 1 - Operator cabin with control panel (Class Automation System) WE CONSIDER PART EXCHANGES OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, PUTZMEISTER SYSTEMS; OR EARTHMOVING MACHINERY CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Gsdpfx Ajvzub Hjfcoua Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Year of construction: 2024, operating hours: 200 h, condition: excellent (used), functionality: fully functional, Industrial food-grade conveyor metal detector for production line quality control. Fully operational and ready for immediate use. Gsdpfx Asyzwp Sjfcoua This Jindun JD-602 was previously utilized in a food production facility and has been professionally maintained. Constructed entirely from 304 stainless steel, with a food-grade blue conveyor belt, the unit is specifically designed for hygienic food processing environments. The electromagnetic detection tunnel reliably locates ferrous, non-ferrous, and stainless steel contaminants within processed products. KEY SPECIFICATIONS: • Model: JD-602 Conveyor Metal Detector • Manufacturer: Guangdong Jindun Electronic Technology Co., Ltd. • Year of manufacture: November 19, 2024 • Serial Number: 20241119010919 • Power supply: 220V, 50Hz (single-phase) • Chassis: 304 stainless steel • Conveyor belt: food-grade (blue) • Control interface: Color LCD touchscreen (English/Chinese) • Detection capability: ferrous, non-ferrous, and stainless steel metals FEATURES: ✓ Fully functional – all features in working order ✓ Food-grade design compliant with HACCP / BRC / IFS requirements ✓ Ideal for testing dry products Reason for sale: Upgrade / surplus to requirements. Inspection and testing available by arrangement. Delivery or collection can be organized upon request.

Condition: used, functionality: fully functional, Drycooler, Free cooler, Glycol cooler, V-Coooler, Hybrid cooler, Cooling tower, Heat exchangers in different capacity , Güntner, Cabero, GEA, Thermokey, Thermofin, Refrion, Swegon, Jaeggi, Gohl, ec. ec. Gjdpfx Ajywaa Eefcoua from 50KW- 5000KW cooling capacity for Genset 95-70°C or chillers 45 38°c

Condition: used, Year of construction: 2022, load capacity: 250 kg, fuel type: electric, power: 11 kW (14.96 HP), We offer this used Jumbo smart dry pelletizer, year of manufacture 2022. Electric drive: 2 × 5.5 kW Gearbox speed: 32 rpm Throughput: 100–250 kg Noise emission: 73 dB(A) Control system: Siemens SPS S7 1500 The pelletizer has only been in operation for a few hours. It was used for the pelletizing of sewage sludge. Feedstuffs or similar materials can most likely also be processed. Gjdpfeyuyt Ssx Afcoua If you have any questions or need more information, please feel free to send us a message or call us.