Dry rotary vane vacuum pump

Marpa Vacuum compatible con Becker MVS-V140 compatible con KVT3.140

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Gbedpfsuf Sy Asx Aaxsl Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: used, Connect Four – The Building Blocks of Success from DLK – Storage Technology | Levelmaker® | Logistics | Solutions OUR OFFER Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your individual requirements. TRANSPORT & ASSEMBLY We are pleased to support you with the transport and assembly of the goods. Gbsdpfx Aasvdqhbjxol PAYMENT TERMS Payment terms are to be agreed in the event of an order. The indicated price is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products across the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and the skilled trades. We constantly offer attractive used equipment from a variety of manufacturers and brands on favourable terms. If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the usual laser printers - also coloured prints on glass, wood, textiles, plastic, metal and many other materialsNew model: PS1015C M Y K LC LM WhiteDruckkopf: Epson TX8002690 dpi max.inclusive software for printer and image processingDimensions: 2.30*1.98*1.34mWeight: 650kg360 degrees Use: Bottles/round objects (surcharge)A1 Size 100x150cm and 70mm print height possible7x500ml Colour can be supplied! (surcharge) LACK FUNCTION POSSIBLE Software adjustment and printer explanation on request. Germany/Europe-wide. (Surcharge)Print videos etc. can be sent by Mail/WhatsApp... Godpsd Ew A Usfx Aaxebl

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: M-VAC 100 Gbedpfjq S N Iiox Aaxel Technical data: 50Hz / 5.5 kW / 11.5/6.6 A Final pressure with open gas ballast: 0.35 mbar Final pressure with closed gas ballast: 0.25 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: as good as new (ex-display), PUMP WITH ATEX CERTIFICATION Gbsdpfxoftzgxo Aaxsl Rotary vane vacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 30 m3 / h at 50Hz. Final vacuum: 1x10^-3 mbar abs. Any clarification, do not hesitate to contact us.

Condition: refurbished (used), Our Leybold RUVAC WAU1001 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances Gbsdpfefq D Hvex Aaxel be fitted with new wear parts be available at short notice included one-year warranty

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Gbodsmxkggspfx Aaxsl Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Gbedpfxswp Dq Se Aaxel The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA - Model - DDANS 17 l Gbodpfxelf Iqno Aaxsl - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor NEW Gbedpfx Aashkttpjxsl Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days