Used Dry Air Dryer for sale (28,573)

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm Codpozv Tchjfx Ap Dehd - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: like new (used), Year of construction: 2018, Refrigerated Dryer AIRPRESS APX 24 Capacity: 2.4 m³/min, Chsdpfxoyy Ulzs Ap Dod Year of manufacture: 2018 The dryer is fully operational.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, Dry hay, biomass or a drying container with an air volume you set yourself, instead of running a fan flat out and paying for it. This Karl Barth AG Ventomat SE-1-100-4p was bought in December 2025 and used for only approx. four months. It runs perfectly and comes as a complete working setup, not just the fan: factory-configured 5.5 kW Invertek Optidrive E3 frequency inverter with disconnect switch, duct cone and reduction, plus a free 10m Ø400mm fabric hose. New purchase price approx. CHF 8,507. Only one available - sold as one complete set with the inverter, ducting accessories and hose. Once sold, it's gone. Best for: hay drying, biomass drying, drying containers and agricultural ventilation where you want to control air volume rather than run flat out. Not suitable for: corrosive or heavily dust-laden air streams, or ATEX zones unless independently verified. What the specs mean in practice: • 5.5 kW motor, 4 kW rated fan output - sized for continuous hay/biomass drying, not short bursts • Factory-configured Invertek Optidrive E3 inverter - set air volume to the crop and its moisture, cutting energy use • Inverter in IP66/NEMA4X with disconnect switch - mounts in a dusty barn without a separate control cabinet • Duct cone 222/563 to D400mm and D750/D600mm reduction - connects to existing ducting, no custom fabrication • 10m Ø400mm flexible fabric hose included - place the fan where it fits, duct air where needed • Painted sheet metal, single-suction Swiss build (Karl Barth AG) - serviceable and supported locally Complete package includes: Ventomat fan, Invertek Optidrive E3 5.5kW inverter with disconnect switch, duct cone 222/563 to D400, duct reduction D750/D600 with flange ring, and a 10m Ø400mm fabric hose at no extra charge. Buying/configuring the inverter alone is a substantial separate cost. Technical data: – Manufacturer: Karl Barth AG, Dättlikon (CH) – Type: Ventomat SE-1-100-4p – Rated output: 4kW – Motor: 5.5kW, 4-pole – Construction: Painted sheet metal, single-suction – Inverter: Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X – Inverter input: 380-480V, 3-phase, 17.2A – Inverter output: 0-480V, 3-phase, 14.0A, 7.5HP – Duct connection: 222/563mm to D400mm, plus D750/D600mm reduction Condition: Barely used (~4 months), technically flawless, fully functional. New price (Dec 2025) CHF 8,507.45 incl. VAT. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). Buy with confidence: purchased Dec 2025, used ~4 months for hay drying/drying container, technically flawless. Inverter can be demonstrated running under load; nameplate photos and a running video available. In-person inspection in Kerns OW by appointment. Why buy now: near-new, factory-configured Swiss unit sold as one complete set - fan, inverter, cone, reduction and hose stay together. Once sold, this configuration won't return at this price. Discount if you're quick: if you buy it till 31.10.2026, we give you a 500CHF discount on the price. Action: send your intended application, required capacity and destination - we'll confirm suitability and a transport estimate. Cjdpfxozrzizj Ap Djhd

Condition: new, Year of construction: 2026, CORMAK THEOR H1515.8 COMPACT Screw Compressor with Integrated Air Dryer The CORMAK THEOR H1515.8 COMPACT screw compressor with an integrated air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. CORMAK THEOR H1515.8 COMPACT High-Pressure Compressor – Ideal for Fiber Laser Cutting Machines Are you looking for a professional and compact solution to power your fiber laser cutting machine? The CORMAK THEOR H1515.8 COMPACT screw compressor is an excellent choice, designed specifically for precision laser cutting applications. With a 15 kW motor and an actual output of up to 1,700 l/min, it provides a stable and reliable supply of compressed air – essential for the efficient operation of laser cutting systems. The THEOR H1515.8 COMPACT screw compressor reaches a maximum operating pressure of 15.8 bar, enabling effective cutting of a wide range of materials. The intuitive MAM electronic control panel provides full control over the machine's operation, allowing easy monitoring and adjustment of operating parameters. Key Parameters ✅ Pressure: up to 15.8 bar ✅ Air output: up to 1,700 l/min ✅ Motor power: 15 kW Technical Specifications Parameter Specification Motor power 15 kW Voltage 400 V / 50 Hz Output at 0–6 bar 1,700 l/min Output at 6 bar 1,650 l/min Codemrmy Aopfx Ap Dshd Output at 8 bar 1,500 l/min Output at 10 bar 1,500 l/min Output at 12 bar 1,350 l/min Output at 14 bar 1,350 l/min Outlet connection 3/4" Dimensions 1550 × 750 × 1200 mm Weight 500 kg

Year of construction: 2018, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: 1CY1119D00007, DONALDSON dryer Buran DC 0225 AB with electronic control with electronic level-controlled steam trap Technical specifications: Model: BURAN DC0225AB Medium: compressed air, free from aggressive components Flow rate: 3,75 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 1 1/4" Electric power supply: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Dimensions, weight Height: 870 mm Width: 480 mm Length: 660 mm Cedpfody Drbjx Ap Dshd Weight: 68 kg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Codjy Ny U Tspfx Ap Dshd

Year of construction: 2018, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: 1CY1116D00007, DONALDSON dryer Buran DC 0125 AB with electronic control with electronic level-controlled steam trap Technical specifications: Model: BURAN DC0125AB Medium: compressed air, free from aggressive components Flow rate: 2.08 m³ / min Operating pressure: 7 barg Cjdedy Dqkspfx Ap Dehd Pressure dew point: 3 ° C Compressed air connection: 1 " Electric power supply: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Dimensions, weight Height: 645 mm Width: 360 mm Length: 410 mm Weight: 34 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, pressure (max.): 16 bar, Adsorption dryer Parker Zander K-MT 35-95/D3 Generation 3 Manufacturer: Parker Hannifin Manufacturing S.r.l. / Parker Zander Model: K-MT 35 Design: K-MT 35-95/D3 Generation 3 Serial number: 399893960001 Year of manufacture: 2019 Voltage: 230 V Frequency: 50–60 Hz Protection class: IP65 Max. operating pressure: 16 bar Min. operating temperature: 1 °C Max. operating temperature: 50 °C Condition: new / unused Machine type: Adsorption dryer for compressed air Csdpfx Aez Dlafep Dehd

Condition: new, Kaeser membrane dryer KMM 5 Volume flow with pressure dew point reduction +35 °C -> +3 °C 0.68 m³/min Volume flow with pressure dew point reduction +35 °C -> -20 °C 0.4 m³/min Volume flow with pressure dew point reduction +5 °C -> -20 °C 0.67 m³/min Purge air 0.1 m³/min Compressed air connection R ¾ Min. overpressure 4 bar Max. Overpressure 14 bar Compressed air inlet temperature min. +1° C Compressed air inlet temperature max. +66° C Width 133 mm Depth 133 mm Height 634 mm Mass 5.9 kg Purge air stop valve Yes Membrane fiber in helix structure Yes Chsdjvkf Aajpfx Ap Djd Outlet silencer Yes Membrane flow from inside to outside Yes From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, volume flow: 1,116 m³/h, type of cooling: air, pressure (max.): 14 bar, Equipment: type plate available, Used Atlas Copco FD310 refrigeration dryer 18.60 m³/min 14 bar Csdpfx Apoym Ub Uo Dshd Year of manufacture: 2011

Condition: used, This listing is for the Bambi VTS 150D Oil Free Dry Air The unit is in full working condition and ready for immediate use. Compact and ultra-quiet, this oil-free compressor delivers clean, dry air for sensitive laboratory applications, including analytical instruments and medical devices. Built for reliability and low maintenance operation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished) Chjdpfx Apoy H Dv Aj Ded

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, volume flow: 990 m³/h, type of cooling: air, pressure (max.): 16 bar, Equipment: type plate available, Used MTA DEIT165 refrigeration dryer 16.50 m3/min 16 bar Chjdpfx Apsy Nkl Nj Djd Year of manufacture 2016

Condition: used, Model MDH 2 Hosokawa Micron Dryer Csdpjzvxvajfx Ap Dehd Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 2013, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. Chedpfx Apszv Tb Re Ded - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, Equipment: CE marking, documentation/manual, emergency stop, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Chjdpfx Aol Sm N Top Ded Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: used, This listing is for a LTE Scientific Unitemp filtered air drying Cabinet The unit is in full working condition and is ready for immediate release LTE Scientific Unitemp Filtered Air Drying Cabinet The LTE Scientific Unitemp Filtered Air Drying Cabinet is designed to provide a controlled, contamination-free environment for drying laboratory equipment. Featuring a fine filter on the air intake, it minimizes particulate contamination, ensuring that freshly washed items remain clean throughout the drying process. Key Features: Capacity: 534 liters, offering ample space for various laboratory drying needs. Temperature Control: Thermostatically controlled with a range from 5 °C above ambient to 65 °C, protected by an over-temperature cut-out device for safety. Air Circulation: A fan circulation system ensures even heat distribution for consistent drying. Construction: Toughened plate glass door for easy monitoring and access. Additional Drying Cabinet Options: Economy Drying Cabinets Large capacity cabinets available at an economical price. Heaters are positioned at the bottom of the cabinet below a perforated base plate and vent through the top. Cedpfx Aexv D Eyep Djhd Fan extraction models enhance drying efficiency by actively drawing air through the chamber. Temperature is controlled via a regulator.

Condition: new, Year of construction: 2026, machine/vehicle number: 1.2455.2, New compressed air refrigeration dryer KAESER TA5 with energy-saving SECOTEC control. with condensate drain with cold storage Year of construction: 2026 Technical data: Flow rate: 0.60 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to + 43°C max. Compressed air inlet temperature: + 55° C Compressed air connection: G 3/4" Dimension (W x D x H): 630 x 484 x 779 mm Weight: 70 kg Chodpfx As Af Swnop Djd electrical supply: 230 V / 1 / 50 Hz Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space.

Condition: used, Used NIRO stainless steel spray dryer - N° 1405 - Tank Ø 800 x 600 mm - Cone Height 650 mm - Electric heating 9 kw - Fan 0.75 kw Chjdezcwnvopfx Ap Ded

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 500 h, Equipment: CE marking, documentation/manual, FrostX 50 Freeze Dryer – 2026 – Very Low Operating Hours For sale is a FrostX 50 freeze dryer, manufactured in 2026, from our food processing business. The machine was delivered in May 2026 and has only been used for a limited number of production and test runs. It is in very good condition and fully operational. Equipment / scope of supply: - FrostX 50 freeze dryer - Year of manufacture: 2026 - Very low operating usage - Original product trays - Tray transport cart - Silicone mats - Manufacturer documentation and operating instructions available The unit is suitable for freeze-drying food products and other suitable materials. Further technical specifications are available in the manufacturer documentation. The machine can be inspected and demonstrated by appointment. Reason for sale: Reorganisation of our production concept as part of a planned capacity expansion. Price: EUR 34,900 net, negotiable Chedj Agpgmepfx Ap Djd Location: Germany Loading can be organised or assisted by prior arrangement. Transport can be arranged by the buyer or discussed individually. Further photos, technical documentation and additional information are available upon request for serious enquiries.

Condition: used, Used Rosenmund model RSD stainless steel nutsche filter dryer. Approximate filtration area of 0.63 sq. m. Internal, external jacket and heated base rated 3.2 bar/full vacuum design pressure at 150 deg. C. Unit includes main drive for agitator with hydraulic power pack for agitator raise/lower and hydraulically operated side discharge valve. Cjdpfx Apjz R R Ade Djhd

Condition: used, Heraeus Type: SUT 6060 Drying cabinet / hot air sterilizer Manufacturer / Type: Heraeus SUT 6060 Features: Temperature range: 250°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 339 mm, Width 403 mm, Height 380 mm External dimensions: Depth 535 mm, Width 744 mm, Height 552 mm Rated voltage 230V, Rated frequency 50/60Hz, Chodpfezdti Dox Ap Dsd Rated current 7.1 A, Rated power 1.64 kW Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: new, This listing is for a Brand New Harvest Right Medium Home PRO Freeze Dryer sold through We are stock holders in UK A home freeze dryer from Harvest Right allows you to preserve the food your family loves to eat. Freeze drying locks in both flavour and nutrition and can last for years, making freeze-dried food even better than fresh! A home freeze dryer is perfect for any lifestyle. What’s Included - Medium Freeze Dryer - Premier Industrial Vacuum Pump (Approx £1200 value) - Vacuum Pump Oil - Oil Filter - Stainless Steel Trays (set of 5) - Guide to Freeze Drying - Mylar Bags (50 ct) - Oxygen Absorbers (50 ct) - Impulse Sealer Features - Tray space: 675 square inches - Freeze dry 4.5 to 5.8KG fresh food per batch - Freeze dry up to 1360KG fresh food per year (This would require a person to use the freeze dryer 4 times a week for 50 weeks a year) Dimensions - Freeze dryer exterior dimensions: 48.3cm wide x 63.5cm deep x 73.7cm height - Perfect for counter top, cart, or table. Weight of freeze dryer: 54KG Premier industrial vacuum pump included/no extra cost (Approx £1200 value) Power Standard UK 230v Shipping Info - The medium freeze dryer ships in one package with a total weight of 95KG - Item will be delivered in international shipping crate (must be purchased from Harvest Right when exporting machines out of USA) - One freeze dryer in special size shipping pallet : 66cm x 91cm x 1114cmH - It is also possible to collect by prior arrangement Chjdjxzg Uujpfx Ap Dsd Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty 1 Year international warranty provided by Harvest Right.

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Cedpfx Apsdzqn Us Dshd Total weight: approx. 40 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, volume flow: 1,526.4 m³/h, type of cooling: air, pressure (max.): 14 bar, Equipment: type plate available, Used Atlas Copco FX17 refrigerant dryer 25.44 m³/min 14 bar Year of manufacture: 2021 Chedozzn D Rjpfx Ap Ded

Condition: used, Labotek Type: FMD-M-M-15-15-V, Model 101134 The Labotek FMD-M-M-15-15-V model belongs to the FMD-M series from Labotek, a leading manufacturer of systems for material drying, dosing, and conveying in the plastics industry. The FMD-M series includes modular dryers designed for processing plastic granules. Technical specifications of the FMD-M series: Type designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are designed for processing plastic granules and are characterized by their modular design, which allows for flexible adaptation to various production requirements. Volts: 3x400 Vac+PE Amps: 10.4 Amps Overcurrent protection: 16 Amps kW: 2.6 kW HZ: 50/60HZ The Labotek AVR3G is an industrial vacuum conveyor with a capacity of 1 liter, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical. Technical data of the Labotek AVR3G (1 liter): Chsdpfozii Dbsx Ap Dod Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed medium: Free-flowing, granular raw material (minimum grain size of 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80 °C Alarm function: In case of material shortage Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.