Used Drill Bit Sharpener for sale (7,191)

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Cedpfsx Anauex Abbsaa Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Csdpfxjx Dd Ecs Abbjaa 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Codpfx Aex A Safebbsaa Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Spindle taper Aciera Drilling capacity in steel 22 mm Throat 270 mm Table size 700 x 370 mm Codpfx Aouy R T Tjbboaa Spindle speeds , inf. variable 40-3'600 rpm MARCELS MASCHINEN CH

Condition: good (used), Various WP boring heads and WP drills from Komet Mount: ABS Caodjxz Sdbopfx Abbja Diameter from 70 to 180 mm New and used Please inquire for the required diameter Tool holder optional

Condition: excellent (used), Year of construction: 1997, DAREX drill sharpening machine 1/3 HP Year of manufacture: 1998 3450 rpm 220 V Caodpfxsxyvxaj Abbea Wheel diameter: 150 mm Left side with drill sharpening attachment (angle 90° - 180°), longitudinal adjustment 25 mm

Condition: used, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21854 Specifications: Codpfx Absxypt Rebeaa 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135

Condition: new, mount diameter: 50 mm, clearance between the columns: 375 mm, spindle mount: MK 4, total height: 2,450 mm, total width: 1,020 mm, total length: 610 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Caodpfx Absxu H Eyebja Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,093 h, Make of engine: Deutz 6 cylinder CE mark: yes Technical condition: very good Visual appearance: very good Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Delivery terms: EXW Production country: SE Please contact Christiaan Dekker for more information Atlas Copco Boomer WE3 C30 Year: 2015 Hours: 3093 1000 volt CE certified Gross weight: 54.7 ton Diesel power180KW 6 cylinder engine Electric power 28KW/ 320Ampere Hydraulic tilt cabin Prepared for Leica GPS Rotary air drills Codjxykvajpfx Abboaa COP 3038 drills Hydraulic waterbooster Hydraulic Compressor Hydraulic manbasket Tyres 90% good Price Euro. 129.000,-

Condition: used, Year of construction: 2009, functionality: fully functional, Morse taper: 3 Drilling capacity: Ø30 mm. (st. 70 kg./mm2) Thread capacity: M25. Quill travel: 120 mm. Throat/reach: 250 mm. RPM.: 65-3060. Table size: 400 x 380 mm. Caodpfex An Hbox Abbsa Automatic feed: Ja Motor: 1,4 kW. Year: 2009 Country of origin: Spain. Size (L x W x H): 750 x 650 x 2100 mm. Weight: 260 kg. With automatic tapping unit, integrated coolant pump in base, drill ejector, work light and drill chuck. Very nice condition. All our used machine are tested and serviced before delivery.

Condition: used, Year of construction: 2007, turning speeds 2800 U/min drill diameter 2 - 40 mm drilling length 200 mm lip angle 40 - 180 ° Csdpjvdxz Asfx Abbsaa total power requirement 0,76 kW weight of the machine ca. 170 kg dimensions of the machine ca. 850 x 850 x 1200 mm Equipment: - Chuck - Coolant device - Machine light - Operating instructions

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers Casdpfx Absv H D N Rsboa -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21856 Specifications: 2020 model 5271 hours (I want to know a little) 1669 stroke hours Chassis (see pictures) New belts Recently serviced Carousel Water mist system CME grinder Leica GPS Vacuum cleaner Drill bit holds on the side Protective cage Automatic drilling Light Air conditioning/ac Ready for delivery   Description: We have an Atlas Copco T35 w/ water mist, cme grinder and gps for sale. Caodexypqpopfx Abbja Everything works as it should according to the owner and service has just been taken. The rig's belts have also recently been replaced. The rig is well maintained and, according to the owner, is in excellent condition. Ready for delivery Engine hours: 5271

Condition: new, mount diameter: 40 mm, clearance between the columns: 350 mm, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Maximum drilling capacity Ø 40 mm Caedoxu Hp Ejpfx Abboa Spindle holder MK 4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Drilling capacity 13 mm Spindle mount B 16 6 spindle speeds 410 - 3400 rpm Drilling depth 60 mm - Drill head height adjustable - Motor pole reversible Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Cajdpfx Aswnfarsbbja D-44143 Dortmund - Wambel

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 CNC Control HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Codpfxoq I Nkbo Abbsaa Z-axis: 1,500 mm Y-axis (cross-ram): 1,300 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Maximum spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm ATC - Tool changer: 60-station (vertical/horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: used, Year of construction: 2010, operating hours: 2,635 h, 2010 | Atlas Copco Boomer XE3C with COP 1838, very good condition, one defect (EPIROC) | Used Drill | 2635 hours 📍Location: Switzerland, Weite 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 98000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 49 inspection points 46 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ Cjdpfx Aoxzhf Iebbjaa 📌 Inspector's Comment: Honest machine from two-tier system, three drilling arms, an additional tamping platform - no maintenance backlog, drive axle "with one blow" broken, no decomposition of the tooth flanks, rather shaft fracture suspected, no external bursting of the differential housing or the axle journals, casting in order. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39154 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1994, Some typical specifications for the TOS W75 machine are: Spindle diameter: approx. 75 mm. Spindle speeds: e.g. 18-1800 rpm. X-axis: approx. 1,250 mm. Y-axis: approx. 900 mm. Z-axis or W-axis: various values, e.g. 560 mm. Table size: approx. 950 × 950 mm. Weight: approx. 10,000 kg Caodpfx Aexw Uclobbja All information provided without guarantee.

Condition: used, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21855 Specifications: Codpoxypp Eefx Abbsaa 2021 model 5631 kg Weight: approximately 20,000 kg Belts replaced in 2024 Winch Water mist L5 gps Services taken in progress It will be delivered with new service Rod shifter Vacuum cleaner Rod magazine Air conditioning/ac Light Radio Ready for delivery   Description: We have a 2021 Sandvik DX800 drilling rig w/ water mist and L5 gps for sale. Everything works as it should and all services and maintenance have been taken care of by the owner. A new service will be taken upon sale. Ready for delivery

Condition: new, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, drilling capacity: 40 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Codpfx Absxu Hnuebsaa Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 1522, type of input current: three-phase, input voltage: 400 V, grinding wheel diameter: 225 mm, rotational speed (min.): 1,500 rpm, overall weight: 850 kg, space requirement height: 1,400 mm, space requirement length: 1,230 mm, space requirement width: 850 mm, grinding wheel width: 50 mm, clamping range: 85 mm, year of last overhaul: 2024, • Grinding range 13 - 85 mm / Point angle 80° - 160° • Overhauled 6-jaw special chuck in 03-2024 (€ 6,250) Codpfjxyhl Ssx Abboaa • Including operating tools • Water tank on wheels (60 liters) • Extension sleeves • Halogen lamp 230V Includes operating manual, exploration drawing, wiring diagram, assembly and spare parts list. Supply of spare parts and maintenance continues to be guaranteed by a specialist company!

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Rotary table: 1,600 x 1,200 mm Maximum workpiece weight: 6,000 kg Automatic universal diagonal swivel head 1° x 1° (optional with fixed ram Ø 210 mm) Spindle taper: SK-50 DIN 69871/A Max. spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverse X,Y,Z: 30 m/min Positioning accuracy: 0.015 mm Repeatability: 0.010 mm ATC – tool changer: 40 positions (vertical / horizontal change) 2 x longitudinal hinge-type chip conveyors Perimeter enclosure (open top) Caedpfxeq I Ncqs Abbsa Only inquiries from Germany will be answered.

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21853 Specifications: Cajdpfx Ajxypprobbja 2020 model About 5380 hours (will be a little) Straight grinder Chassis (see pictures) Recently serviced Carousel Rod shifter Vacuum cleaner Winch Protective cage Remote control Pendant on base Light Ready for delivery   Description: We have a 2020 Atlas Epiroc T30 drilling rig w/ L5 gps for sale. It has recently been serviced and everything works as it should, according to the owner. Services and maintenance are ongoing. The number of hours will increase slightly as the rig is in daily operation. Ready for delivery Engine hours: 5380

Condition: used, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21933 Specifications: Codpox Anahjfx Abboaa Approx. 4000 hours Hose reel Winch Flashing lights Extra lighting Good undercarriage including tracks and wheels Compressor 24V Remote control Engine: Perkins Diesel, 4-cylinder Hammer: Atlas Copco 670

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21850 Caodpfxoxydkks Abbja Specifications: 2020 model 4908 Hours (I want a little) 1602 Stroke hours (I want a little) Chassis (see pictures) About 14000 kg Winch Remote control Rod shifter Carousel Services performed continuously Vacuum cleaner Light Protective cage Pendant on base Support paws Ready for delivery   Description: We have a 2020 Atlas Epiroc T30 drilling rig for sale. The rig has recently had service and maintenance. Everything works as it should according to the owner. The number of hours will increase slightly as the rig is in weekly operation. Ready for delivery Own weight: 14000 Engine hours: 4908