Used Saw Drill Attachment for sale (15,222)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Voortman V603 / VB750 CNC Drilling / Sawing Line – Year 2003 Three Spindle. 18 metres In-Feed. 13.5 metres Out-Feed. Pusher Unit Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity. Bljdpjz Hd Sfefx Aa Ion

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kaltenbach KDS 615 / KBS 750 CNC Drilling / Sawing Line – Year 2010. 3 Spindles. Automatic Tool Changer. Hard Stamping. Gripper feed. 16 metres Infeed. 16 metres Outfeed. Infeed and Outfeed Cross Transfers. KALTENBACH KDS 615 3 axes CNC drilling machine KDS 615: Drilling spindle speed range 100 - 2500 rpm Drilling spindle drive power x 15 kW Total drill length. 160 - 460 mm Bljdpfxszcqmxe Aa Ion Drill feed range 40 - 1000 mm/min Work piece width: 620 mm Workpiece height: 440 mm Drill diameter: 10 - 40 mm Number of drill axes: 3 KALTENBACH KBS750 Working range 90° 750 x 500 mm Working range 60° 650 x 500 mm Working range 45° 520 x 500 mm Working range 30° 390 x 500 mm Drive power5,5 kW

Condition: good (used), Year of construction: 1989, double-sided processing from 280 to 2500 mm the following equipment is available on each side: saw drilling head with 3 drills dowel inserter 3 drilling units from above, at the front 2 drilling units from above, at the rear Bedpfx Aaszzprps Isln return transport from below

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Bledpfetnf Iysx Aa Ijn Increase your productivity with this complete automatic drill-saw street for profiles. Designed to work efficiently and accurately with different profile steel materials. Price does not include disassembly, assembly, transportation and import duties. Please contact us for more information about this machine.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. Blsdpfxsv U Ea Hj Aa Ijn 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal.

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. Blsdpfxox Rut To Aa Ion 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. Bsdpfox Ruudsx Aa Ioln 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity. Bljdpfx Aexmvnuea Ien

Condition: used, Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table router with feed in a single machine, and comes with a comprehensive range of accessories. Technical data: - Motors: 2 Bjdpfeztvywjx Aa Ioln - Length: approx. 320 cm - Width: approx. 140 cm - Height: approx. 160 cm - Table: swivelling - Technical details: on request

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Bedpjvpafyjfx Aa Ioln Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, PEDDINGHAUS TDK 1000/9 DRILLING MACHINE Blsdpfxjzc I Iyj Aa Isn 9 SPINDLES MAXIMUM PROFILE 1000 X 420mm MEBA 1020 DGP SAWING MACHINE cutting diameter: 510 mm capacity 90 degrees: round: 510 mm capacity 90 degrees: flat: 1020 x 510 mm capacity 60 degrees: round: 500 (400) mm capacity 60 degrees: flat: 500 (400) x 510 mm capacity 45 degrees: round: 510 mm capacity 45 degrees: flat: 750 (670) x 510 mm

Condition: not inspected (used), Maximum working length: 1500 mm Blodpfxexz Um Se Aa Ien Tilting capacity of heads: from −10∘ to +45∘ Swivelling capacity of heads: from −10∘ to +90∘ Motor power, machining unit: 2×2.25 kW (3 HP) Motor power, drilling unit: 2×2.25 kW (3 HP) Longitudinal movement motor power: 1×2.25 kW (3 HP) Saw blade diameter: 400 mm Saw/drill rotational speed: approx. 3000 rpm CONDITION UNKNOWN – NOT TESTED

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Blsdpfjx N Iclsx Aa Isn Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Bljdpfx Aasig T Amo Isn Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Bsdped N Rb Dofx Aa Ioln Drilling front heads on each side included Very good condition. Available immediately.

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit Bedpfx Ajq Ii Dlea Ieln The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. Blodpjyak Anofx Aa Ion The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Bjdpfx Aaohkhume Isln Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Condition: excellent (used), Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Quantity: 3x Sassex/WMW drill chucks -Recording: MK6 -Total length: 600 mm -Pin holder: Ø 12 mm -Pen spacing: 77 mm -2x Sassex/WMW drill bit holders -Recording: MK6 -Total length: 620 mm -Pin holder: Ø 16 mm -Pen spacing: 96 mm Price: for all 5 pieces Bledsc Iqrgjpfx Aa Isn -Weight: 56 kg

Condition: excellent (used), Attachment holders, standard holders and accessories, spiral drill bits, BILZ spiral drill bits, reaming bits, BILZ reamers, BILZ holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 8 pieces -Recordings: MK5, MK4, MK3 -Spiral drill bits: 35 pieces Bodpfx Aaeyrgwxs Isln -Sizes: Ø38 mm - Ø95 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 550/300/H70 mm -Weight: 28 kg

Condition: reconditioned (used), Year of construction: 1998, coffin saw with drill Eugen Mayer lignum Eugen Mayer 715 column drills used 1998 Mark: eugen Model: Mayer 715 Bsdpfx Ajkmgpvsa Isln Description: beveller saw with drilling for Eugen Mayer coffins Year: 1998

Condition: excellent (used), Max workpiece length: 3600 mm Min workpiece length: 350 mm Max workpiece width: 200 mm Min workpiece width: 70 mm Max workpiece height: 100 mm Min workpiece height: 25 mm Total machine height: 1900 mm Minimum worktable height: 950 mm Bjdpfsxvmttjx Aa Ioln Worktable guide length: 4000 mm Worktable guide width: 170 mm Total saw blade unit guide length: 110 mm Max table stroke: 110 mm Max drill head stroke: 150 mm Number of drill spindles: 5 pcs (spacing 32 mm) Saw blade diameter: 350 mm Drill head motor: 2 x 1.5 HP Saw blade motor: 2 x 3 HP

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. Bsdpfxozwh Rcj Aa Ieln It has 18KW motors. This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. All new power feed sprockets and fully DC braked.

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 Bledpfjy Erzdsx Aa Ijn --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G: complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bars. Bjdpfx Aaew Hf T Ne Isln