Used Dowel Inserting for sale (2,293)

Condition: good (used), Year of construction: 2006, Used insertion press HAEGER 824 plus-1H with feed hopper Technical data: Manufacturer: HAEGER Model: 824 plus-1H Year of manufacture: 06/2006 Condition: good, used Press force, min: 2.0 kN Press force, max: 72.0 kN Insertion capacity up to 1800 pieces Adjustable range of ram: 0-220 mm Overhang: 610 mm Connections: 3 phases, 50 Hz, 380 V, 16 A Electronic control / CE: 24 V Motor power: 3.6 kW Oil capacity: 83 l Gbjde Ahwkrjpfx Aikew Dimensions (W x D x H): 1100x1650x2400 mm Weight: 1450 kg Fully hydraulic insertion press for manual and/or automatic processing of insertion fasteners from all manufacturers. Fastener range: M2-M10. Standard equipped with a patented safety control system. Due to the integrated fixed stop, the precise pressure build-up, and the low assembly value, the machine is ideally suited for use as an "assembly/riveting press". including accessories: Modular, patented fastener feeding system from Haeger-MAS-9 Advantages: - Fasteners in the size range M2-M8 can be fed - Processing capacity up to 1500 pieces per hour - Very easy tool change without adjustment effort (plug-in tool modules) - Tool change time, e.g. from nuts to bolts or bushings, approx. 2 minutes - Large feed hopper made of wear-resistant, stainless steel The picture shows the same model, but not the machine itself that is for sale.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 160 t, Hydraulic 160 T double cylinder insertion press Double column press- two cylinder press with 160 T capacity at 250 bar. a) idle speed downward 9,8 mm/sec. b) upward speed up to 15,0 mm/sec. c) table size 1500x600x100 mm, height adjustable d) ram plate, 1500x600x100 mm e) year of construction 12/2020 f) motor power 11 KW g) pump capacity 22 L/minute h) travel limitation by cam switch i) Open height 700 mm j) ram travel 500 mm k) Remote control via two-hand operation l) Pressure setting via rotary control from approx. 30 to 160 T m) Approx. height 2800 mm n) T-slots according to customer requirements o) Weight approx. 4,200 kg p) Oil tank with approx. 200 L volume q) Painting in RAL 5005 ( royal blue ) or according to customer's request. Gjdpfx Aiegz H Dheksbw r) For safety reasons the ram plate is painted orange RAL 2009 or signal yellow RAL 1023 s) Assembly, commissioning, instruction can be provided at a separate charge. The travel can be adjusted by cam switches. The ram/table size of the machine shown is 1600x600x100 mm.

Condition: used, maximum load weight: 28,812 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, Year of construction: 2018, Equipment: ABS, 3-axle curtainsider with steered axle, lift axle, Code-XL body, beverage and Daimler-9.5 certificate, sliding roof, and complete preparation for a forklift. Chassis hot-dip galvanized. DIMENSIONS AND WEIGHTS - Internal body length 13,620 mm, body width 2,480 mm - Front body height 2,700 mm / rear body height 2,750 mm - Lateral passage height front 2,550 mm / rear 2,600 mm - Front wall height 2,400 mm - Overall height 4,015 mm, loading height at the rear 1,235 mm (unladen) - Fifth wheel height 1,150 mm (unladen), wheelbase 7,700 mm - Rear door opening 2,480 x 2,648 mm (W x H) - Permissible total weight 36,000 kg (technical 39,000 kg) - Payload 28,812 kg (technical 31,812 kg) - Permissible aggregate load 24,000 kg, fifth wheel load 12,000 kg - Tare weight, complete 7,188 kg CHASSIS / AXLES / BRAKES - Chassis MODULOS, bolted, hot-dip galvanized, 10-year warranty against rust-through - 3 x Schmitz ROTOS SCB 9 t axles, disc brake 430 mm, offset 120 - 3rd axle as trailing steered axle, locking when reverse gear is engaged - 1st axle liftable (driving assistance, activation via 3x brake) - Axle spacing offset 1,310 / 2,020 mm - SCB air suspension, lifting and lowering device with auto-reset - EBS 4S/2M+1M with stability program (RSP) - Two-line compressed air brake system, double-diaphragm spring brake cylinder Gjdpfx Aij Aimh Djkjbw - Trailer-Info-System Smartboard with axle load display and mileage - Support legs JOST, semi-round foot with plate, single-sided operation, low maintenance - Kingpin 2" interchangeable - Lateral impact protection, foldable underrun protection (forklift holder) - Plastic mudguards, additional mudguards between the axles, anti-splash mud flaps - 2 wheel chocks with holder FORKLIFT PREPARATION - Chassis adaptation for forklift - Holder with foldable underrun protection - Steel impact protection at the rear with roller neck impact buffers and chain holder - 3 sockets at the rear (2x 7-pole, 1x 15-pole) for forklift WHEELS AND TIRES - 6 x 385/65 R22.5 Goodyear, regional transport (M+S) - Steel wheels 11.75x22.5 offset 120, silver RAL 9006, protective caps for wheel nuts - Without spare wheel holder LIGHTING - LED lighting system 24 V according to ECE R48, multi-chamber lights - LED side marker lights with flashing function - LED position lights - LED ambient lighting on the right and left in the area of the support legs - Premium distributor with 3 sockets (2x 7-pole, 1x 15-pole) - Rear contour marking red, side white BODY - Platform body 3-section - Front wall anodized with steel corner posts (galvanized) and steel impact protection inside 350 mm - Document box, plastic, on the front wall - Rear wall: aluminum double-wing doors in body height with internal twist-lock closures - 2 steel corner posts at the rear with integrated lashing system - 3 pairs of center rails, each with 4 lashing slots, reinforced - 4 rows of aluminum top rail with V-profile - Open holder for 16 top rails on the left - Outer frame with lashing rail and 3 pairs of rail wedges - Retractable ladder at the rear - Plastic tool box with lid holder, insert tray and drawer FLOOR - 28 mm plate floor, max. 7,500 kg forklift axle load (strength test according to DIN EN 283) - Floor completely glued, sealed around and between the floor joints ROOF AND TARPAULIN - Schmitz sliding roof, 180 mm height, 2,480 mm internal width, end rail foldable - Sliding roof can also be shifted to the rear - Sliding roof with manual rail lifter - Sliding tarpaulins 880 g/m² with reinforce

Condition: used, first registration: 10/2023, Schmitz Cargobull SKO 24/L - 13.4 FP COOL V7 Reefer Semi-Trailer Manufacturing date: 10/17/2023, Chassis No.: WSM000005317619 Refrigeration unit: Thermo King SLXi-400, Operating hours: [Diesel 5,825 h / Mains 50 h] Young 3-axle reefer trailer with double-deck system, pallet box, lift axle, temperature recorder, ATP and HACCP certificate, as well as rail and ferry equipment. Chassis hot-dip galvanized, body white. DIMENSIONS AND WEIGHTS - Internal body length: 13,403 mm, usable: 13,315 mm - Internal body width: 2,490 mm, external: 2,600 mm - Internal body height: 2,650 mm, usable: 2,550 mm - Rear door opening: 2,490 x 2,640 mm (W x H) - Overall height approx. 3,950 mm, loading height at the rear: 1,202 mm (unladen) - Fifth wheel height: 1,130 mm (unladen), wheelbase: 7,600 mm - Permissible total weight: 39,000 kg - Permissible unit load: 24,000 kg (technically 27,000 kg), fifth wheel load: 15,000 kg - Tare weight according to manufacturer: 8,073 kg (without refrigeration unit) REFRIGERATION AND TEMPERATURE CONTROL - Refrigeration unit: Thermo King SLXi-400 - Temperature recorder: Euroscan TX3 with printer according to EN 12830 - 2 temperature sensors for temperature recording - Plastic air duct under the roof (hose design with zipper) - Circulation wall approx. 1,750 mm high made of aluminum hollow profiles with pallet stop - Plastic fuel tank 245 l with 2 filling nozzles, biodiesel-compatible - Preparation for partition wall REFRIGERATED BOX BODY - FERROPLAST reefer box made of polyurethane rigid foam panels, thermally insulated and vapor-tight - Side walls: COOL 45, front wall, roof and doors insulated - Interior cladding made of plastic-coated sheet steel - Double-leaf rear door, insulated, stainless steel locking mechanism - Rear wall frame made of stainless steel, additional impact protection at the bottom - Aluminum baseboard profiles 300 mm on side walls, front wall and doors - Rubber door protection strips in full height - Interior lighting with door contact switch CARGO SECUREMENT AND DOUBLE DECK - Height-adjustable double-deck system for 11 x 3 Euro pallets with 22 aluminum support beams - Body certified according to DIN EN 12642 Code XL - LDS certificate (cargo securing) - Hole-slot cargo securing rails made of galvanized steel, embedded on both sides in the side walls - Additional anchor rail 680 mm above the floor FLOOR - Multifunctional floor, test load 5,500 kg, forklift axle load - Floor pan with 300 mm high aluminum baseboard profile - Floor recesses in the wheel arch area CHASSIS / AXLES / BRAKES - Galvanized-bolted chassis, 10-year warranty against rust-through - 3 x Schmitz ROTOS SCB 9 t axles, disc brake 430 mm - 1st axle can be lifted (starting aid) - SCB air suspension, lifting and lowering device with auto-reset - EBS 2S/2M with stability program (RSP) - Two-line pneumatic brake system with standard and Duomatic couplings - Hub odometer - Support jacks JOST, single-sided operation, low maintenance - Kingpin 2" replaceable - 2 wheel chocks with holder RAIL AND FERRY EQUIPMENT - Underrun protection 18 t bolted with sliding plate for rail and ferry loading - 4 pairs of ferry lashing points according to DIN/ISO 9367 with support block mounting ATTACHMENTS - Pallet box for 36 Euro or 24 ISO pallets - Spare wheel carrier (basket) for 2 wheels - Plastic tool box with insert and drawer - Extendable folding ladder at the rear right - Dynamic Ramp Protection DRP 3.0, rubber ramp buffer and rear ram protection bar Godpe Aiyk Nsfx Aiksbw -

Condition: used, first registration: 10/2023, Equipment: ABS, Schmitz Cargobull SKO 24/L - 13.4 FP COOL V7 Refrigerated Box Semi-Trailer Date of manufacture: 10/17/2023, Chassis No. WSM000005317617 Gbsdo Aiykzopfx Aikew Refrigeration unit: Thermo King SLXi-400 Operating hours: [Diesel 5,497 h / Electric 51 h] Young 3-axle refrigerated trailer with a double-deck system, pallet box, lift axle, temperature recorder, ATP and HACCP certificate, as well as railway and ferry equipment. Chassis hot-dip galvanized, body white. DIMENSIONS AND WEIGHTS - Internal body length 13.403 mm, usable 13.315 mm - Internal body width 2.490 mm, external 2.600 mm - Internal body height 2.650 mm, usable 2.550 mm - Rear door opening 2.490 x 2.640 mm (W x H) - Overall height approx. 3.950 mm, loading height at the rear 1.202 mm (unladen) - Coupling height 1.130 mm (unladen), wheelbase 7.600 mm - Perm. total weight 39,000 kg - Perm. unit weight 24,000 kg (technically 27,000 kg), drawbar load 15,000 kg - Unladen weight according to manufacturer 8,073 kg (without refrigeration unit) REFRIGERATION AND TEMPERATURE CONTROL - Refrigeration unit Thermo King SLXi-400 - Temperature recorder Euroscan TX3 with printer according to EN 12830 - 2 temperature sensors for temperature recording - Plastic air duct under the roof (hose design with zipper) - Circulation wall approx. 1,750 mm high made of aluminum hollow profiles with pallet stop - Plastic fuel tank 245 l with 2 filler necks, suitable for biodiesel - Preparation for partition wall BOX BODY - FERROPLAST refrigerated box made of polyurethane rigid foam panels, thermally efficient and vapor-tight - Side walls COOL 45, front wall, roof and doors insulated - Internal lining made of plastic-coated sheet metal - Double-leaf rear door insulated, stainless steel locking mechanism - Rear wall frame made of stainless steel, additional impact protection at the bottom across - Aluminum baseboard trim 300 mm on side walls, front wall and doors - Rubber door protection strips in full height - Interior lighting with door contact switch CARGO SECUREMENT AND DOUBLE-DECK SYSTEM - Height-adjustable double-deck system for 11 x 3 Euro pallets with 22 aluminum load beams - Body certified according to DIN EN 12642 Code XL - LDS certificate (cargo securing) - Perforated slot cargo securing rails made of galvanized steel, embedded on both sides in the side walls - Additional anchor rail 680 mm above the floor FLOOR - Multifunction floor, test load 5,500 kg, forklift axle load - Floor pan with 300 mm high aluminum baseboard trim - Floor recesses in the wheel arch area CHASSIS / AXLES / BRAKES - Galvanized-bolted chassis, 10-year warranty against rust-through - 3 x Schmitz ROTOS SCB 9 t axles, disc brake 430 mm - 1st axle liftable (starting aid) - SCB air suspension, lifting and lowering device with auto-reset - EBS 2S/2M with stability program (RSP) - Two-line compressed air brake system with standard and Duomatic couplings - Hub odometer - Support winch JOST, single-handed operation, low maintenance - 2" kingpin replaceable - 2 wheel chocks with holder RAILWAY AND FERRY EQUIPMENT - Underrun protection 18 t bolted with sliding plate for railway and ferry loading - 4 pairs of ferry lashing points according to DIN/ISO 9367 with support bracket ATTACHED COMPONENTS - Pallet box for 36 Euro or 24 ISO pallets - Spare wheel holder (basket) for 2 wheels - Plastic toolbox with insert and drawer - Extendable folding ladder at the rear right - Dynamic Ramp Protection DRP 3.0, rubber ramp buffer and ramp guard at the rear - Later

Condition: new, turning length 3000 mm turning diameter 800 mm turning dia. in gap 1000 mm turning diameter over slide 540 mm turning speeds 25 - 1600 U/min quill: 5 MK quill travel 235 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 weight of the machine ca. 3820 kg. dimensions 4800 x 1320 x 1580 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 100 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 Gbedpfx Aioxabcdokjw - Rapid traverse lengthwise and facewise - Slip clutch - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading bed length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loaded platform height approx. 890 mm, 24 tie-down rings each 10 t, 12 stake pockets in the outer frame, access ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, access ramps laterally adjustable, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking according to regulations, revolving beacon, vehicle hot-dip galvanized, incl. axle load indicators. Surcharge for: warning signs with lighting and revolving beacon, widening to 3 m with wood inserts, price: 500 €; digger arm recess, price: 1,000 € net. -- Printing errors, mistakes and changes reserved, sample pictures -- More data at: !, More details at: ! Gbodpfe Ai Dt Aex Aikow

Condition: used, maximum load weight: 30,360 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Wiese 3-axle forklift transporter with a 9-ton heavy-duty tail lift, lift axle, and trailing steering axle ? 3-axle forklift transporter in a mega design ? Saddle height approx. 950 mm ? Curtain-sided body with sliding side tarpaulins ? Sliding cover and liftable roof ? Liftable roof can be raised approx. 400 mm ? Roof system can be locked at 2 driving heights ? Chassis length approx. 13,620 mm ? Wheelbase approx. 8,000 mm ? Support winch position approx. 2,300 mm from the kingpin ? 3 x SAF axles ? 1st axle as a lift axle ? 3rd axle as a trailing steering axle ? Axle spacing approx. 1,310/1,610 mm ? Air suspension with lifting and lowering device ? Tires 435/50 R 19.5 ? SAF telescopic support winches, 24 tons ? Spare wheel holder in winch design ? Lateral insertion strips for load securing ? Lashing points with crossbar, 5 tons per lashing point ? Reinforced screen-printed floor ? Floor tested for forklift axle load up to 9 tons according to DIN EN 283 ? Integrated lashing rails in the loading floor ? DHOLLANDIA heavy-duty tail lift with 9-ton load capacity ? Tail lift can handle loads up to 14 tons Gbode Aix N Ispfx Aikew ? Radio remote control for ramp operation ? LED interior lighting on the rear pillars ? LED work lights ? Lateral underrun protection ? Chassis in RAL 9005 deep black If you have any questions or are interested, please do not hesitate to contact us.

Condition: used, functionality: fully functional, This used BITO pallet racking system is a robust, heavy-duty racking solution for industrial storage needs and is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of 2,700 kg per level and a field load capacity of 5,400 kg, the BITO pallet racking system offers a reliable and space-saving solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: Length: approx. 100.80 meters Height: approx. 420 cm Depth: approx. 110 cm Shelf load capacity: 2,700 kg per level Field load capacity: 5,400 kg Levels: Floor + 2 beam levels Pallet spaces: 324 including floor spaces Beams: approx. 270 × 11 × 5 cm (PT 27.112 LN) Beam color: red painted Uprights: approx. 420 × 110 × 12 cm (P2512), pre-assembled Upright color: galvanized Racking system: BITO Condition: Used DELIVERY SCOPE: 037 × Uprights, 420 × 110 × 12 cm (P2512), pre-assembled 144 × Beams, 270 × 11 × 5 cm (PT 27.112 LN) 288 × Locking pins PRICE: 7,546.00 € net, 8,979.74 € gross You will receive an invoice with VAT shown. Godj Aif Nvopfx Aiksbw OTHER DESIGNS & ACCESSORIES: This offer represents a possible racking combination. Depending on stock levels, other lengths and configurations are also available. We can also offer suitable accessories for your pallet racking system – for example, impact protection, load securing, grid shelves, and shelf inserts. Please let us know your requirements. We will put together a suitable racking combination for you. DELIVERY, COLLECTION, ASSEMBLY & INSPECTION: Nationwide delivery is possible via our partner shipping company – freight costs depend on the quantity delivered and the postal code Collection from our warehouse in 49835 Wietmarschen is possible Professional assembly and disassembly by our teams is optional Racking inspections according to DIN EN 15635, taking into account the German Occupational Safety and Health Act (BetrSichV), are carried out by appropriately qualified personnel. PLANNING & CONSULTATION: Our planning department will be happy to assist you with the appropriate racking configuration. Whether it's a new installation, renovation, or expansion – we will advise you individually and, if you wish, provide you with a non-binding offer. SHOWROOM: We invite you to visit our showroom in Wietmarschen. Here, you can gain a comprehensive overview of our pallet racking, storage racking, and other storage solutions. HAVEN'T FOUND WHAT YOU'RE LOOKING FOR YET? Visit our website. Here, you will find a quick overview of many other offers, designs, and racking combinations. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us via message or phone. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: new, 10x20m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 200sqm system platform Data: - Length : approx. 10m - Width : approx. 20m - Lower edge of platform : approx. 2.5 m Gbodpfo Aifihsx Aikow - Top edge of stage : approx. 2.88 m - Total area : approx. 200 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 4.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 20 x C profile 4000 mm , sendzimir galvanized . - 52 x S profile 4800 mm , sendzimir galvanized . - 18 x support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 93 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 18 x Lining plates for supports . - 18 x Set of dowels for supports . Price : 20.609 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 5x10m storage platform, load: 500kg/sqm lower edge: 3m, approx. 50sqm, system platform Data : - Length : approx. 5m - Width : approx. 10m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 50 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 04 x C profile 5000 mm , sendzimir galvanized . - 14 x S profile 4800 mm , sendzimir galvanized . - 06 x Support 3000 mm , RAL 7016 . - 03 x dome strut 3049 mm , RAL7016 . - 24 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 06 x Lining plates for supports . - 06 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : 7.840 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Gbjdpo Aifiwsfx Aikow Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, 7 adjustable feet made of cast steel/grey cast iron Gbedpfx Ao Aipqueikew Height with mounting plate: approx. 600 to 640 mm (adjustable) Height of the green feet without mounting plate: 490 mm (6 pieces) Height of the grey foot without mounting plate: 515 mm (1 piece) Foot diameter: 360 mm - Threaded spindle for height adjustment - Tapered socket with ball/dowel for the plate - Ideal for measuring plates, layout plates, straightening plates, welding plates, and cast plates Weight per foot: 40 kg Good condition

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Gbsdpfx Ais Afznuskow Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Easily guided unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Operating manual. Onboard tools. Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension +100 km/h, lowered chassis Equipment: - 8 tie-down points - Loading edge for ramps - Welded frame Net price: €5,689.08 / Gross price: €6,770.00 Article number: AZH235452030.04 Technical data: • Brand: Hapert Trailers • Model: Azure H-2 • Vehicle type: Flatbed trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 455 x 200 x 30 cm • External dimensions (LxWxH): 611 x 206 x 94 cm • Loading height of the floor: 64 cm • Permissible total weight: 3,500 kg • Tare weight: 758 kg • Payload: 2,742 kg • Chassis: Flatbed trailer (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • New side wall hinges incl. welded-on hooks for securing, among other things, a cargo net. • Aluminum side walls with robustly installed latches • Aluminum side walls, anodized, double-walled • All side walls can be folded down and removed • Steel corner posts, removable • Option to insert supports at all 4 corners for tarpaulin frames, grid attachments, side wall extensions or front wall extensions • Stable eccentric latches • Screen-printed wooden floor, continuous without a joint, non-slip and waterproof • Reinforced, securely bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in a high point load capacity • Additional longitudinal struts welded in • All cross and longitudinal members rest on the ground • 8 tie-down loops recessed inside the side edge (1000 DaN/kg), TÜV certified! • U-profile on the rear for easier attachment of the ramps • Cargo net hooks on the hinge lower parts • Parabolic axle from KNOTT • Shock absorbers for 100 km/h fitted • Parabolic axle for absolute driving comfort! • Reverse assist • KNOTT overrun device and parking brake • 13-pole connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center Gbodpfj Aick Nsx Aiksw _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Offroad 185/70R13C tires Equipment: - Steel side panels - Accessory kit - 4 tie-down points Net price: €2,007.56 / Gross price: €2,389.00 Article number: TEB210201035.03 Technical data: • Brand: TPV Trailers • Model: TL-EB2-Offroad • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 202 x 107 x 35 cm • External dimensions (LxWxH): 308 x 165 x 90 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,000 kg • Unladen weight: 240 kg • Payload: 760 kg • Chassis: Low loader (wheels next to the body) • Tires: 235/75R16 Gbjds Aicmyspfx Aiksw • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Side panels made of 1.0 mm steel sheet • Round knobs for mounting nets or tarpaulins • Continuous longitudinal beams (4 pieces) • Screen-printed plywood floor, 15 mm thick, seamless, non-slip and waterproof • Eccentric locking for the rear door • Galvanized V-drawbar • Aluminum tread plate fenders, reinforced and walkable • Possibility of inserting tarpaulin frames at all 4 corners • 4 tie-down points mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • Shock absorbers mounted • 100 km/h manufacturer approval • 13-pole plug • Large-sized safety lighting • Integrated rear fog lamp • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request specific options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transit license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop - for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - 6 lashing points - Ramp edge - Welded frame Net price: €3,273.11 / Gross price: €3,895.00 Article number: AZH227331830.02-1 Technical data: • Brand: Hapert Trailers • Model: Azure H-2 • Vehicle type: Platform trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 335 x 180 x 30 cm • External dimensions (L x W x H): 467 x 186 x 95 cm • Loading height of the floor: 64 cm • Permissible total weight: 2,700 kg • Unladen weight: 510 kg Godpo Aicl Aefx Aiksbw • Payload: 2,190 kg • Chassis: Platform trailer (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • New side panel hinges incl. welded hooks for securing, among other things, a cargo net. • Aluminum side panels with robustly installed locks • Aluminum side panels, color anthracite - 30cm installed • Aluminum side panels, anodized, double-walled • All side panels are foldable and removable • Steel corner posts, removable • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side panel extensions or front panel extensions • Stable eccentric locks • Screen-printed wood floor, continuous without joints, non-slip and waterproof • Reinforced, stably screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many crossmembers, resulting in high point load capacity • Additional longitudinal struts, continuously welded in • All cross- and longitudinal members rest on the ground • 6 lashing eyes recessed inside on the side edge (1000DaN/kg) TÜV certified! • U-profile on the rear for easier placement of the ramp • Cargo net hooks on the hinge lower parts • Maintenance-free rubber spring axle from KNOTT • Reverse automatic • KNOTT overrun device and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration certificate can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair & workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale exceptions apply -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & emergency hand pump Equipment: - 6 lashing points Gbsdpfxo Aichbj Aikew - Aluminum sideboards - Electric pump Net price: €4,214.29 / Gross price: €5,015.00 Article number: HUK118271511.01 Technical data: • Brand: Humbaur • Model: HUK 182715 • Vehicle type: Rear tipper • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 268 x 150 x 30 cm • External dimensions (LxWxH): 413 x 164 x 98 cm • Loading height of the floor: 67 cm • Permissible total weight: 1,800 kg • Unladen weight: 540 kg • Payload: 1,260 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum sideboards, anodized, double-walled • Aluminum sideboards, anodized, double-walled • All sideboards can be folded down and removed • Steel corner posts, removable • Option to insert tarpaulin frames, grid extensions, sideboard extensions or front wall extensions at all 4 corners • Sturdy eccentric locks • Solid steel floor - extremely robust • Reinforced continuous V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts welded throughout • E-hydraulic system for tipping with battery in the box and cover • 71AH battery • Battery is charged via a 13-pin plug from the towing vehicle (all pins of the socket must be occupied) • External battery charging socket for 230V charger • Emergency hand pump for manual tipping in case of a discharged battery • 6 lashing eyes, recessed inside on the side edges (800 DaN/kg), TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any additional features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Features: Gbodpo Aicrtjfx Aiksw - 8 lashing eyes - Loading edge for ramps - Welded frame Net: €3,634.45 / Gross: €4,325.00 Article number: AZH230402030.02 Technical data: • Brand: Hapert Trailers • Model: Azure H-2 • Vehicle type: Flatbed trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 405 x 200 x 30 cm • External dimensions (L x W x H): 561 x 206 x 94 cm • Loading height of the floor: 64 cm • Permissible total weight: 3,000 kg • Unladen weight: 612 kg • Payload: 2,388 kg • Chassis: Flatbed trailer (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO/BPW rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • New side wall hinges incl. welded-on hooks for securing, among other things, a cargo net. • Aluminum side walls with robustly installed latches • Aluminum side walls, anodized, double-walled • All side walls can be folded down and removed • Steel corner posts removable • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side wall attachments or front wall extension • Stable eccentric latches • Screen-printed wood floor, continuous without joints, non-slip and waterproof • Reinforced, sturdy, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in a high point load capacity • Additional longitudinal struts, continuously welded • All cross and longitudinal members rest on the ground • 8 lashing eyes recessed inside the side edge (1000 DaN/kg) TÜV certified! • U-profile on the rear for easier attachment of the ramps • Cargo net hooks on hinge lower parts • Maintenance-free rubber spring axle from ALKO/BPW • Reversing aid • ALKO/BPW overrun device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel, centrally located _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & manual hydraulic pump, steel sideboards Equipment: - All-steel floor - Ramp compartment - Steel sideboards Net: €6,289.92 / Gross: €7,485.00 Article number: HTK230311712.01 Technical data: • Brand: Humbaur • Model: HTK 3000.31 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 314 x 175 x 35 cm • External dimensions (LxWxH): 450 x 193 x 126 cm • Loading height of the floor: 75 cm • Permissible total weight: 3,000 kg • Unladen weight: 915 kg • Payload: 2,085 kg • Chassis: High-loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Double-walled steel sideboards • All sideboards can be folded down and removed • Removable steel corner posts • Rear flap can also be pivoted • Insertion option at all 4 corners for tarpaulin frames, grid attachment, sideboard attachments, or front panel extension • Sturdy toggle lever locks • All-steel floor - extremely robust • Very stable, bolted V-drawbar, REINFORCED • Very stable steel frame, welded • Frame completely hot-dip galvanized Gbodpfxezy Azze Aikow • Many cross members for high point load capacity • Additional longitudinal struts welded continuously • Electric hydraulics for tilting, with battery in the box and cover • 71Ah battery • Battery is charged via a 13-pin plug from the towing vehicle (provided all pins of the socket are connected) • External battery charging socket for 230V charger • Manual hydraulic pump for tilting by hand when the battery is empty • 6 recessed lashing eyes inside on the side edge (800DaN/kg), TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • Ramp compartment as preparation for aluminum ramps for easy retrofitting • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about any specific requests! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & emergency hand pump, steel side walls Equipment: - Steel side walls - All-steel floor - Ramp compartment Net price: €7,940.34 / Gross price: €9,449.00 Article number: HTK235361812.01 Technical data: • Brand: Humbaur • Model: HTK 3500.37 • Vehicle type: Three-way tipper • Vehicle condition: New • Initial registration: Without initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 363 x 185 x 35 cm • External dimensions (L x W x H): 509 x 202 x 125 cm • Loading height of the floor: 75 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,076 kg • Payload: 2,424 kg • Chassis: High-loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Double-walled steel side walls Godpfx Aio Aicp Rjksbw • All side walls can be folded down and removed • Removable steel corner posts • Rear flap can also be pivoted • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side wall attachments or front wall extensions • Sturdy toggle lever locks • All-steel floor - extremely robust • Very stable, screwed V-drawbar REINFORCED • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded in • E-hydraulic system for tipping with battery in the box and cover • 71AH battery • Battery is charged via a 13-pin plug from the towing vehicle (all pins of the socket must be connected) • External battery charging socket for 230V charger • Emergency hand pump for manual tipping in case of a discharged battery • 8 lashing eyes recessed inside the side edge (800 DaN/kg) TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrunning device and parking brake • Ramp compartment as preparation for aluminum ramps for easy retrofitting • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E&N emergency hand pump, ramp package (ramps + supports), parabolic suspension +100km/h Equipment: -Full steel floor -H-frame front -5-stage cylinder Net: €10,920.17 / Gross: €12,995.00 Article number: CHP335402011.05 Technical data: • Brand: Hapert Trailers • Model: Cobalt Plus • Vehicle type: Three-sided tipper • Vehicle condition: New vehicle • First registration: no first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 405 x 200 x 40 cm • External dimensions (LxWxH): 541 x 206 x 113 cm • Loading height of the floor: 78 cm • Perm. total weight: 3,500 kg • Unladen weight: 1,458 kg • Payload: 2,042 kg • Chassis: Low loader (wheels under the body) • Tires: 185/70R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Yes DESCRIPTION • New side wall hinges incl. welded-on hooks for attaching a load securing net, etc. • 40cm aluminum side walls with robust, built-in locks • Aluminum side walls anodized, double-walled • Powder-coated side walls (anthracite/black) • All side walls can be folded down and removed • Steel corner posts removable • Option to insert at all 4 corners for tarpaulin frames, grating attachments, side wall attachments, or front wall extensions • Load securing net hooks on hinge lower parts • Stable eccentric locks • High grating 205x70cm for insertion • Full steel floor 3mm hot-dip galvanized – extremely robust • Reinforced, stable, bolted V-drawbar • Very stable steel frame welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded in • All cross and longitudinal members rest on the ground • 8 lashing eyes recessed inside the side frame (1000DaN/kg) TÜV certified! • U-profile on the rear for easier placement of the ramps • Ramp compartment with license plate flap • 2x integrated aluminum ramps 250cm, load capacity: 3,600 kg • 2x crank supports, rotary & crankable, heavy duty • 1x crank for rear supports incl. bracket • Solid 5-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/90AH) in the box incl. cover • Detachable remote control for electric hydraulics with spiral cable and battery status indicator • Emergency hand pump • External battery charging socket for 230V charger • Hapert 230V battery charger for Cobalt tipper • Parabolic axle from KNOTT • Shock absorber for 100km/h installed • Parabolic axle for absolute driving comfort! • Reinforced tires 185/70R13C • Reversing automatic • KNOTT drawbar and parking brake • 13-pole plug • Reversing lights • Large-sized safety lighting • Full LED rear lights incl. rear light protection grid • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced 70mm automatic support wheel with console _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired modifications! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert deal Gedpj Aicvljfx Aikebw

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Folding front panel Features: - V-drawbar - Aluminum side walls - 4 lashing eyes on the side edge Net price: €1,508.40 / Gross price: €1,795.00 Article number: HAK110211135.01 Technical data: • Brand: Humbaur • Model: HA 102111 • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 205 x 110 x 35 cm • External dimensions (L x W x H): 323 x 156 x 89 cm • Loading height of the floor: 53 cm • Permissible total weight: 1,000 kg • Unladen weight: 178 kg • Payload: 822 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/80R13 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side walls, anodized, double-walled • Screen-printed plywood floor, continuous without joints, non-slip and waterproof • Folding rear side wall • Folding front side wall • Long lever locks flush with the side wall • Continuous longitudinal beams • Frame completely hot-dip galvanized • V-drawbar • Plastic fenders Gbodpfszy Aykjx Aikjw • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side wall attachments or front panel extension • 4 lashing brackets inside on the side edge (certified 400kg/dAN) • Maintenance-free rubber spring axle from ALKO • Reversing automatic • ALKO overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Grid extension Equipment: - Steel sheet body - V-drawbar - 6x lashing eyes Net: €2,647.06 / Gross: €3,150.00 Article number: VF22202514340.11 Technical data: • Brand: Variant • Model: 2004 F2 • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 255 x 145 x 90 cm • External dimensions (LxWxH): 395 x 192 x 145 cm • Loading height of the floor: 52 cm • Perm. total weight: 2,000 kg • Tare weight: 350 kg • Payload: 1,650 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Torsionally rigid longitudinal frame for safe driving characteristics • Steel sheet side panels, galvanized • Insertion option at all 4 corners for tarpaulin frames, grid extension, side panel extensions or front wall extension • Rear side panel can be folded down • Made of multi-glued, screen-printed plywood, 15 mm, non-slip and waterproof • Maintenance-free rubber spring axles • Axle with continuous axle body and individual wheel suspension • 6 recessed lashing eyes in the floor • Angle lever closure • Removable grid extension • Tarpaulin buttons for cargo net or flat tarpaulin • Overrun brake by Knott • Stable V-drawbar • Reversing automatic • KNOTT overrun device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Lighting recessed in the rear frame • Integrated rear fog light • 13-pin plug • Support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask about any specific requests! _____ Gbodpfx Aiezy Dcgokjw - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - official dealers & repair workshops for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting Features: - 8 lashing points - Tilting loading area - Universally applicable, sideboards can be retrofitted Net: €2,092.44 / Gross: €2,490.00 Article number: MUL115331800.01 Technical data: • Brand: Martz • Model: UNILADER 330 C • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 330 x 184 x 0 cm • External dimensions (L x W x H): 490 x 245 x 87 cm • Permissible total weight: 1,500 kg • Tare weight: 340 kg • Payload: 1,160 kg • Chassis: Low loader (wheels beside the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Screen-printed wooden floor, non-slip and waterproof • Insertion option at all 4 corners for grid attachment, sideboard attachments or front panel extension • Stable eccentric locks for locking the loading area • Very low chassis for a low loading angle • Tilting loading area, with gas springs • Optional retrofitting of higher sideboards and a rear ramp • Very stable steel frame • 8 lashing points recessed in the frame profile on the side • Reversing assist • KNOTT inertia brake and parking brake • Very stable, bolted V-drawbar • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 Gedpfxjx Tcfpo Aikjbw 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension +100 km/h, Lowered chassis Equipment: -Ramp edge for ramps -Welded frame -12 lashing points Net price: €6,512.61 / Gross price: €7,750.00 Article number: AZH235602230.04 Technical data: • Brand: Hapert Trailers • Model: Azure H-2 • Vehicle type: Flatbed trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 605 x 220 x 30 cm • External dimensions (LxWxH): 761 x 226 x 94 cm • Loading height of the floor: 64 cm • Permissible total weight: 3,500 kg • Tare weight: 886 kg • Payload: 2,614 kg • Chassis: Flatbed (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • New side wall hinges including welded-on hooks for securing, among other things, a cargo net. • Aluminum side walls with robustly installed latches • Aluminum side walls, anodized, double-walled • All side walls can be folded down and removed • Steel corner posts, removable • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side wall attachments or front wall extension • Stable eccentric latches • Screen-printed plywood floor, continuous without joints, non-slip and waterproof • Reinforced, stable, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded in • All cross and longitudinal members rest on the ground • 12 lashing eyelets recessed inside in the side edge (1000 DaN/kg), TÜV certified! • U-profile on the rear, for easier placement of the ramps • Cargo net hooks on the hinge lower parts • Parabolic axle from KNOTT • Shock absorbers for 100 km/h installed • Parabolic axle for absolute driving comfort! • Reverse automatic • KNOTT overrun device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any desired extras! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Gjdpfx Aio Aickpjkebw Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -